Experimental insights into deformation dynamics and intermittency in rapid granular shear flows

This work concerns the experimental study of rapid granular shear flows in annular Couette geometry. The flow is induced by continuous driving of the horizontal plate at the top of the granular bed in an annulus. The compressive pressure, driving torque, instantaneous bed height and rotational speed of the shearing plate are measured. Moreover, local stress fluctuations are measured in a medium made of steel spheres 2 and 3 mm in diameter. Both monodisperse packing and bidisperse packing are investigated to reveal the influence of size diversity in intermittent features of granular materials. Experiments are conducted in an annulus that can contain up to 15 kg of spherical steel balls. The shearing granular medium takes place via the rotation of the upper plate which compresses the material loaded inside the annulus. Fluctuations of compressive force are locally measured at the bottom of the annulus using a piezoelectric sensor. Rapid shear flow experiments are pursued at different compressive forces and shear rates and the sensitivity of fluctuations are then investigated by different means through monodisperse and bidisperse packings. Another important feature of rapid granular shear flows is the formation of ordered structures upon shearing. It requires a certain range for the amount of granular material (uniform size distribution) loaded in the system in order to obtain stable flows. This is studied more deeply in this thesis. The results of the current work bring some new insights into deformation dynamics and intermittency in rapid granular shear flows. The experimental apparatus is modified in comparison to earlier investigations. The measurements produce data for various quantities continuously sampled from the start of shearing to the end. Static failure and dynamic shearing ofa granular medium is investigated. The results of this work revealed some important features of failure dynamics and structure formation in the system. Furthermore, some computer simulations are performed in a 2D annulus to examine the nature of kinetic energy dissipation. It is found that turbulent flow models can statistically represent rapid granular flows with high accuracy. In addition to academic outcomes and scientific publications our results have a number of technological applications associated with grinding, mining and massive grain storages.

Mass transfer and particleinteractions in granular systems and suspension flows

The purpose of this study was to investigate some important features of granular flows and suspension flows by computational simulation methods. Granular materials have been considered as an independent state ofmatter because of their complex behaviors. They sometimes behave like a solid, sometimes like a fluid, and sometimes can contain both phases in equilibrium. The computer simulation of dense shear granular flows of monodisperse, spherical particles shows that the collisional model of contacts yields the coexistence of solid and fluid phases while the frictional model represents a uniform flow of fluid phase. However, a comparison between the stress signals from the simulations and experiments revealed that the collisional model would result a proper match with the experimental evidences. Although the effect of gravity is found to beimportant in sedimentation of solid part, the stick-slip behavior associated with the collisional model looks more similar to that of experiments. The mathematical formulations based on the kinetic theory have been derived for the moderatesolid volume fractions with the assumption of the homogeneity of flow. In orderto make some simulations which can provide such an ideal flow, the simulation of unbounded granular shear flows was performed. Therefore, the homogeneous flow properties could be achieved in the moderate solid volume fractions. A new algorithm, namely the nonequilibrium approach was introduced to show the features of self-diffusion in the granular flows. Using this algorithm a one way flow can beextracted from the entire flow, which not only provides a straightforward calculation of self-diffusion coefficient but also can qualitatively determine the deviation of self-diffusion from the linear law at some regions nearby the wall inbounded flows. Anyhow, the average lateral self-diffusion coefficient, which was calculated by the aforementioned method, showed a desirable agreement with thepredictions of kinetic theory formulation. In the continuation of computer simulation of shear granular flows, some numerical and theoretical investigations were carried out on mass transfer and particle interactions in particulate flows. In this context, the boundary element method and its combination with the spectral method using the special capabilities of wavelets have been introduced as theefficient numerical methods to solve the governing equations of mass transfer in particulate flows. A theoretical formulation of fluid dispersivity in suspension flows revealed that the fluid dispersivity depends upon the fluid properties and particle parameters as well as the fluid-particle and particle-particle interactions.

Risks in R&D Collaboration between Small and Large Firms

The main aim of this thesis was to find out what kinds of risks arise from collabo-ration in R&D between small and large firms. The suitability and gain of some buyer/supplier risk frameworks in examining of R&D collaboration has been in-vestigated. A risk model has been based on the buyer/supplier risks models found in the literature. Its applicability has been tested empirically by means of theme interviews with firm representatives. The risk classification framework received some confirmation. But the study also showed that the theoretical framework was not completely adequate, as a new risk class arose from communication. Collaboration causes risks, and these risks should be taken into account when R&D collaboration is planned. The advantage of risk examination is the possibility to decrease failures and losses, and to in-crease possibilities for success and economical benefits. This study should be used as a managerial analysis tool in trying to understand the form and concept of risk in risk expectancy.

A Large-Sized Multiwire Proportional Counter for Radiological Survey of Large Areas and Surfaces

Työn tavoitteena oli selvittää, miten eri parametrit vaikuttavat monilankaisen verrannollisuuslaskurin laskennallisiin ominaisuuksiin sekä voidaanko suurikokoista monilankaverrannollisuuslaskuria käyttää tehokkaasti suurien pintojen ? - ja ?- kontaminaation mittaamiseen. Ensin selvitettiin EU:n nykyistä clearing-käytäntöä sekä hahmoteltiin tulevia materiaalivirtoja, esiteltiin verrannollisuuslaskurin ja sen monilankamallin toimintaperiaate sekä käytettävien materiaalien ominaisuudet. Kootun teorian pohjalta selvitettiin tärkeimpien parametrien vaikutus ilmaisimen laskennallisiin ominaisuuksiin. Lopuksi suoritettiin rakenteilla olevan monilankaverrannollisuuslaskurin alustava testaus. Tulevien vuosien aikana eri puolilla maailmaa suljettavat erityyppiset ydinlaitokset luovat suuren tarpeen tehokkaiden kontaminaatiomittauslaitteistojen kehittämiselle. Tällä hetkellä mittaukset suoritetaan lähinnä noin 1 dm2 käsi-instrumentein, joten suurikokoinen, automatisoitu mittauslaitteisto sekä tehostaisi mittausprosessia suuresti sekä säästäisi runsaasti miestyötunteja. Jatkotoimenpiteiksi ehdotetaan laitteiston jatkotestausta, liikkeen ja nopeuden testausta sekä lopulta paikkaherkkyystoiminnon toteuttamisperiaatteen valintaa ja testausta.

Implementing the Product Configurator in a Large Manufacturing Company

Työn tavoitteena on kuvata hissin ovien tuotekonfigurointiprosessia sekä SAP R/3 tuotekonfiguraattorin käyttöönoton aiheuttamia vaikutuksia. Työssä kuvataan myös uuden tuotekonfiguraattorin kehitystä, testausta, käyttöönottoa sekä pitkäaikaishallintaa. Tuotekonfigurointi on tehokas tapa toteuttaa massaräätälöintiä. Sen tarkoituksena on yhdistää massatuotannon ja asiakaskohtaisen tuotannon etuja tarjoamalla asiakkaille räätälöityjä, esisuunniteltuihin komponentteihin ja ennalta määrättyyn konfigurointimalliin perustuvia tuotteita. Näitä tuotteita tuotetaan konfigurointiprosessissa. Tämä prosessi voi olla erittäin monimutkainen ja altis virheille, joten sen tueksi on kehitetty tuotekonfiguraattoreita. Tuotekonfiguraattorit voivat tehostaa konfigurointiprosessia merkittävästi. KONE on valmistanut konfiguroitavia tuotteita useita vuosikymmeniä ja se on käyttänyt prosessien tukemiseen useita eri konfiguraattoreita. Näin ollen uuden konfiguraattorin käyttöönoton vaikutusten ei oleteta olevan niin dramaattisia kuin otettaessa konfiguraattoria käyttöön ensimmäisen kerran. Uudella konfiguraattorilla on kuitenkin useita vaikutuksia tuotteen hallintaan, konfigurointiprosessiin, tietojärjestelmiin, alihankkijoihin sekä asiakkaisiin. Konfiguraattorin käyttöönoton vaikutuksia tehostaa projektin liittyminen ERP järjestelmän käyttöönottoon

Febrile Infections in Children with Leukemia with Special Reference to Respiratory Viral Infections

Leukemiaa sairastavien lasten kuumeiset infektiot, erityisesti respiratoriset virusinfektiot Tausta: Hengitysteiden virusinfektiot ovat lasten tavallisimpia sairauksia. Infektiota aiheuttava virus voidaan uusilla menetelmillä löytää lähes kaikissa tapauksissa. Leukemiaa sairastavilla lapsilla on perustaudin ja leukemian hoitojen takia tavallista suurempi infektioalttius, ja kuumeilu on tavallista leukemiahoidon aikana. Suurin osa syöpähoidon aikaisten kuumejaksojen syistä jää kuitenkin selvittämättä. Tavoitteet: Prospektiivisen 5 vuotta kestäneen monikeskustutkimuksen tavoitteena oli etsiä uusimmilla mikrobiologisilla menetelmillä leukemiaa sairastavien lasten kuumeen syy. Tätä varten tutkittiin 16 virusta virusviljelyllä, antigeeniosoituksella ja nukleiinihappo-osoituksella. Näytteitä otettiin nenästä, ulosteesta, virtsasta ja verestä. Lisäksi tutkittiin MxA-proteiinin kykyä osoittaa virusinfektio syöpälapsella. Tulokset: Tutkimuksen aikana analysoitiin 138 kuumejaksoa 51 leukemialapsella. Kokonaisseuranta-aika oli 1.5 vuotta/lapsi. Kuumejaksojen ilmaantuvuus oli 2.1 jaksoa potilasta kohden suhteutettuna vuoden riskiaikaan. Hengistysteiden virusinfektio voitiin osoittaa 82 kuumejaksossa (59%). Kaksi tai useampi virus löydettiin 12 %:ssa kuumejaksoista. Tavallisimmat virukset olivat rhinovirus (22 %), respiratory syncytial virus eli RS-virus (11 %), human herpes virus 6 (7 %), human bocavirus (5 %), sytomegalovirus (5 %), parainfluenssavirukset (5 %) ja influenssa A -virus (4 %). Kahdelle potilaalle kehittyi pneumonia, muilla oireet olivat lievät. Veriviljely oli positiivinen 19 kuumejaksossa (14 %), ja puolessa tapauksista löydettiin samanaikaisesti respiratorinen virus. MxA proteini ilmeni veren lymfosyyteissä useimmilla virusinfektioon sairastuneilla syöpälapsilla. Päätelmät: Kuumeiset respiratoriset virusinfektiot ovat tavallisia leukemiaa sairastavilla lapsilla. Infektion oireet ovat tavallisesti vähäiset, mutta pienelle osalle voi kehittyä veriviljelypositiivinen sepsis tai pneumonia. Kuumeen syy jäi selvittämättä vain harvoissa tapauksissa.

Large Break Blowdown Test Facility Study

Työn tarkoituksena on kerätä yhteen tiedot kaikista maailmalta löytyvistä ison LOCA:n ulospuhallusvaiheen tutkimiseen käytetyistä koelaitteistoista. Työn tarkoituksena on myös antaa pohjaa päätökselle, onko tarpeellista rakentaa uusi koelaitteisto nesterakenne-vuorovaikutuskoodien laskennan validoimista varten. Ennen varsinaisen koelaitteiston rakentamista olisi tarkoituksenmukaista myös rakentaa pienempi pilottikoelaitteisto, jolla voitaisiin testata käytettäviä mittausmenetelmiä. Sopivaa mittausdataa tarvitaan uusien CFD-koodien ja rakenneanalyysikoodien kytketyn laskennan validoimisessa. Näitä koodeja voidaan käyttää esimerkiksi arvioitaessa reaktorin sisäosien rakenteellista kestävyyttä ison LOCA:n ulospuhallusvaiheen aikana. Raportti keskittyy maailmalta löytyviin koelaitteistoihin, uuden koelaitteiston suunnitteluperusteisiin sekä aiheeseen liittyviin yleisiin asioihin. Raportti ei korvaa olemassa olevia validointimatriiseja, mutta sitä voi käyttää apuna etsittäessä validointitarkoituksiin sopivaa ison LOCA:n ulospuhallusvaiheen koelaitteistoa.

Pneumatic Conveying of Granular Materials in a Pilot Scale Downer-Riser System

Studies regarding the field of this work aim to substitute industrial mechanical conveyors with pneumatic conveyors to overcome the disadvantages in solids flow regulation and risks posed to production and health. The experimental part of this work examines how the granular material properties, fluidizing airflow rate, equipment geometry, and pressures along the pipes affect the mass flow rate through the system. The results are compared with those obtained from previous experiments conducted with alumina. Experiments were carried out with a pilot scale downer-riser system at Outotec Research Center Frankfurt. Granular materi-als used in this work are named as sand, ilmenite, iron ore 1 and iron ore 2.

Innovation – from individual intuition to collaborative innovation. The role of individual key actor in facilitation of innovation in large organization context

The objective of this research was to study the role of key individuals in facilitation of technology enabled bottom-up innovation in large organization context. The development of innovation was followed from the point of view of individual actor (key individual) in two cases, through three levels: individual, team and organization, by using knowledge creation and innovation models. This study provides theoretical synthesis and framework through which the study is driven. The results of the study indicate, that in bottom-up initiated innovations the role of key individuals is still crucial, but innovation today is collective effort and there acts several entrepreneurial key individuals: innovator, user champion and organizational sponsor, whose collaboration and developing interaction drives innovation further. The team work is functional and fluent, but it meets great problems in interaction with organization. The large organizations should develop its practices and ability to react on emerging bottom-up initiations, in order to embed innovation to organization and gain sustainable innovation. In addition, bottom-up initiated innovations are demonstrations of peoples knowing, tacit knowledge and therefore renewing of an organization.

Russian Enterprise Restructuring - the Effect of Privatisation and Market Liberalisation on the Performance of Large Enterprises

The fundamental question in the transitional economies of the former Eastern Europe and Soviet Union has been whether privatisation and market liberalisation have had an effect on the performance of former state-owned enterprises. This study examines the effect of privatisation, capital market discipline, price liberalisation and international price exposure on the restructuring of large Russian enterprises. The performance indicators are sales, profitability, labour productivity and stock market valuations. The results do not show performance differences between state-owned and privatised enterprises. On the other hand, the expansion of the de novo private sector has been strong. New enterprises have significantly higher sales growth, profitability and labour productivity. However, the results indicate a diminishing effect of ownership. The international stock market listing has a significant positive effect on profitability, while the effect of domestic stock market listing is insignificant. The international price exposure has a significant positive increasing effect on profitability and labour productivity. International enterprises have higher profitability only when operating on price liberalised markets, however. The main results of the study are strong evidence on the positive effects of international linkages on the enterprise restructuring and the higher than expected role of new enterprises in the Russian economy.

Drag force and frictional resistances in vertically vibrated dense granular media

The objective of this thesis is to shed light on the vertical vibration of granular materials for potential interest in the power generation industry. The main focus is investigating the drag force and frictional resistance that influence the movement of a granular material (in the form of glass beads) contained in a vessel, which is subjected to sinusoidal oscillation. The thesis is divided into three parts: theoretical analysis, experiments and computer simulations. The theoretical part of this study presents the underlying physical phenomena of the vibration of granular materials. Experiments are designed to determine fundamental parameters that contribute to the behavior of vibrating granular media. Numerical simulations include the use of three different software applications: FLUENT, LS-DYNA and ANSYS Workbench. The goal of these simulations is to test theoretical and semiempirical models for granular materials in order to validate their compatibility with the experimental findings, to assist in predicting their behavior, and to estimate quantities that are hard to measure in laboratory.