Jakelukeskuksen tiedonhallinnan optimointi

Vuoden 2008 lopussa alkaneen talouslaman johdosta myös Polar Electrolla lähdettiin hallitsemaan kuluja aiempaa tehokkaammin. Eri toimintojen kustannukset otettiin tarkempaan ja entistä kriittisempään tarkasteluun. Tällä tavoin pyrittiin löytämään kohtia, joissa toimintoja ja prosesseja pystyttäisiin tehostamaan. Tämän diplomityön tarkoituksena oli löytää ratkaisuja Polar Electron ja logistiikkaratkaisuja tarjoavan Geodis Wilsonin väliseen kommunikaatioon sekä yhtiöiden väliseen tiedonhallintaan. Optimoimalla näiden osa-alueiden toimintaa pystytään saavuttamaan kustannussäästöjä sekä parantamaan toimitusketjun tehokkuutta jakelukeskuksen toiminnan osalta. Ensimmäisenä vaiheena projektissa tunnistettiin nykyiset prosessit ja kuvattiin ne hyödyntäen SCOR-mallin standardikuvaustyyppejä. Näiden kuvausmallien avulla Polarilla voidaan tarkastella logistista ympäristöä uudesta näkökulmasta. Konkreettisena tuloksena työssä saavutettiin viisi kehitysehdotusta, joiden pohjalta prosesseja pystytään muokkaamaan ja edelleen kehittämään.

Electric propulsion system in a modern sports car

In this thesis an electric propulsion system is designed on a device level using Cadence ORCAD. The vehicle belongs to the Helsinki Metropolia University of Applied Sci-ences and it is to compete in the Automotive X-Prize competition held in the USA. In this thesis the electric propulsion system and related electric safety measures are designed. Also electro-magnetic compatibility and interferences present in the system are examined by examining the birth mechanisms and transmission paths of interference. Per device effects of interference and solutions to minimize them were examined and proposed. Suitability of permanent magnet synchronous machines for passenger vehicle use was examined by examining the torque production capability of the motor and the torque requirements of the vehicle. Also a short overview of history of electric vehicles is given.

Syystunnelma

Soitinnus: lauluääni, piano.

Leivo

B-puolen kappaleiden yhteiskesto 3'06.

Kitkat katkat

Sanat: Kanteletar.

Poijat ne kulkee

Soitinnus: lauluääni, piano.

Loitsu

Sanat: Kanteletar.

Silloin minä itkin

Yksinlaulu, sovitus kansanlaulusta.

Analysis and Control of Excitation, Field Weakening and Stability in Direct Torque Controlled Electrically Excited Synchronous Motor Drives

Direct torque control (DTC) is a new control method for rotating field electrical machines. DTC controls directly the motor stator flux linkage with the stator voltage, and no stator current controllers are used. With the DTC method very good torque dynamics can be achieved. Until now, DTC has been applied to asynchronous motor drives. The purpose of this work is to analyse the applicability of DTC to electrically excited synchronous motor drives. Compared with asynchronous motor drives, electrically excited synchronous motor drives require an additional control for the rotor field current. The field current control is called excitation control in this study. The dependence of the static and dynamic performance of DTC synchronous motor drives on the excitation control has been analysed and a straightforward excitation control method has been developed and tested. In the field weakening range the stator flux linkage modulus must be reduced in order to keep the electro motive force of the synchronous motor smaller than the stator voltage and in order to maintain a sufficient voltage reserve. The dynamic performance of the DTC synchronous motor drive depends on the stator flux linkage modulus. Another important factor for the dynamic performance in the field weakening range is the excitation control. The field weakening analysis considers both dependencies. A modified excitation control method, which maximises the dynamic performance in the field weakening range, has been developed. In synchronous motor drives the load angle must be kept in a stabile working area in order to avoid loss of synchronism. The traditional vector control methods allow to adjust the load angle of the synchronous motor directly by the stator current control. In the DTC synchronous motor drive the load angle is not a directly controllable variable, but it is formed freely according to the motor’s electromagnetic state and load. The load angle can be limited indirectly by limiting the torque reference. This method is however parameter sensitive and requires a safety margin between the theoretical torque maximum and the actual torque limit. The DTC modulation principle allows however a direct load angle adjustment without any current control. In this work a direct load angle control method has been developed. The method keeps the drive stabile and allows the maximal utilisation of the drive without a safety margin in the torque limitation.

Electric-drive-based control and electric energy regeneration in a hydraulic system

Over the recent years, development in mobile working machines has concentrated on reducing emissions owing to the tightening rules and needs to improve energy utilization and reduce power losses. This study focuses on energy utilization and regeneration in an electro-hydraulic forklift, which is a lifting equipment application. The study starts from the modelling and simulation of a hydraulic forklift. The energy regeneration from the potential energy of the load was studied. Also a flow-based electric motor speed control was suggested in this thesis instead of the throttle control method or the variable displacement pump control. Topics related to further development in the future are discussed. Finally, a summary and conclusions are presented.

Saostuman esto prosessiputken pinnalle

Työn tarkoituksena oli tutkia kirjallisuudessa esitettyjen menetelmien soveltuvuutta estää kalsiumkarbonaatin saostuminen PCC – prosessissa paperikonelinjan massansyöttöputkessa. Menetelmien heikkoudet ja toimivuudet arvioitiin lähdetietojen perusteella, joiden perusteella tehtiin johtopäätelmiä niiden toimivuudesta prosessissa ja käytettävyydestä kalsiumkarbonaattisaostuman muodostumiseen. Kirjallisuusselvitys osoittaa, että saostuma voidaan estää kemiallisesti ja sähkökemiallisesti sekä modifioimalla materiaalipintaa. Lisäksi sen muodostuminen voidaan estää ultraääniaaltojen avulla sekä indusoimalla mahdolliseen saostuskohtaan magneetti- tai sähkökenttä. Kokeellisessa osassa keskityttiin kirjallisuuden perusteella tutkimaan kalsiumkarbonaatin saostumista kaupallisilla menetelmillä. Tutkimuksissa käytettiin erilaisia pinnoitemateriaaleja, ultraääniaaltoja sekä magneettikenttää että liuossähkökemiaa. Näiden lisäksi tutkittiin saostumisen kehittymistä putkipinnalle ajan funktiona. Kokeellisten tulosten perusteella kirjallisuudessa esitetyistä menetelmistä ei suoraan mikään sovellu sellaisenaan tutkitussa prosessissa saostuman muodostumisen estoon. Koeparametrien optimointi muuttamalla tunnettuja parametreja prosessitilanteeseen paransi kalsiumkarbonaatin liukoisuutta. Tämän tutkimuksen tuloksena löytyi menetelmäkuvaus, jolla saostumien muodostuminen putkipinnoille voidaan estää.

Biolietteen kuiva-ainepitoisuuden parantaminen elektro-kuivauksen avulla

Tässä työssä tutkittiin sähkön käyttömahdollisuuksia metsäteollisuuden jäteveden-puhdistamolla syntyvän biolietteen kuivauksessa. Lisäksi selvityksen kohteena olivat lietteen sähkökuivaukseen vaikuttavat tekijät. Työn kirjallisessa osassa perehdyttiin lietteiden syntyyn jätevedenpuhdistamolla sekä lietteiden ominaisuuksiin. Työssä tutustuttiin myös lietteiden käsittelyyn ja siinä käytettäviin tekniikoihin. Ennen työn kokeellista osaa esiteltiin sähkökuivauksen periaate sekä sähkökuivaukselle aiemmin tehtyjä tutkimuksia ja niistä saatuja kokemuksia. Myös tuotteistetut elektrokuivauksen sovellukset olivat osa työtä. Kokeellisessa osassa keskityttiin varsinaisiin sähkökuivauskokeisiin. Tutkimukset suoritettiin suodatuskokein, jotka toteutettiin imuun perustuvalla Büchner-suodattimella sekä painesuodattimella. Kokeissa tutkittiin tasavirran, virran pulssituksen ja vaihtovirran vaikutusta metsäteollisuuden primääri- ja biolietteeseen. Tasavirtatutkimuksissa sähkövirtaa johdettiin lietteeseen suodatuksen aikana, kun taas vaihtovirtaa testattaessa liete käsiteltiin ensin sähköllä ja suodatettiin erikseen. Suodatuskokeiden lisäksi tutkimuksissa tarkkailtiin lietteiden kuiva-ainepitoisuuksia, redox-potentiaalia, lämpötilaa, pH:ta ja sähkönjohtokykyä. Lietteitä tutkittiin myös tuhkapitoisuuden suhteen sekä suoritettiin solututkimuksia fluoresenssilukijan avulla. Työn laboratoriotutkimukset osoittivat sähkön vaikuttavan selkeästi biolietteen ve-denerotuskykyyn: sähkö nopeutti lietteen suodatusta parhaimmillaan yli 70 %. Säh-kökuivauksella lietteen kuiva-ainepitoisuudet pysyivät samoina, mutta suodatus nopeutui ja suodatusajat jopa puolittuivat. Myös lietteen sähkönjohtokyky kasvoi sähkökäsittelyn aikana, mikä viittasi veden vapautumiseen solujen sisältä. Lietteen kunto ja ominaisuudet, polymeeri, sekoitus sekä sähkökäsittelyn parametrit olivat tärkeässä asemassa sähkökuivauksen onnistumisen kannalta.

Virtual technology and haptic interface solutions for design and control of mobile working machines

Commercially available haptic interfaces are usable for many purposes. However, as generic devices they are not the most suitable for the control of heavy duty mobile working machines like mining machines, container handling equipment and excavators. Alternative mechanical constructions for a haptic controller are presented and analysed. A virtual reality environment (VRE) was built to test the proposed haptic controller mechanisms. Verification of an electric motor emulating a hydraulic pump in the electro-hydraulic system of a mobile working machine is carried out. A real-time simulator using multi-body-dynamics based software with hardware-in-loop (HIL) setup was used for the tests. Recommendations for further development of a haptic controller and emulator electric motor are given.

Tooth-Coil Permanent Magnet Synchronous Machine Design for Special Applications

This doctoral thesis presents a study on the design of tooth-coil permanent magnet synchronous machines. The electromagnetic properties of concentrated non-overlapping winding permanent magnet synchronous machines, or simply tooth-coil permanent magnet synchronous machines (TC-PMSMs), are studied in details. It is shown that current linkage harmonics play the deterministic role in the behavior of this type of machines. Important contributions are presented as regards of calculation of parameters of TC-PMSMs,particularly the estimation of inductances. The current linkage harmonics essentially define the air-gap harmonic leakage inductance, rotor losses and localized temporal inductance variation. It is proven by FEM analysis that inductance variation caused by the local temporal harmonic saturation results in considerable torque ripple, and can influence on sensorless control capabilities. Example case studies an integrated application of TC-IPMSMs in hybrid off-highway working vehicles. A methodology for increasing the efficiency of working vehicles is introduced. It comprises several approaches – hybridization, working operations optimization, component optimization and integration. As a result of component optimization and integration, a novel integrated electro-hydraulic energy converter (IEHEC) for off-highway working vehicles is designed. The IEHEC can considerably increase the operational efficiency of a hybrid working vehicle. The energy converter consists of an axial-piston hydraulic machine and an integrated TCIPMSM being built on the same shaft. The compact assembly of the electrical and hydraulic machines enhances the ability to find applications for such a device in the mobile environment of working vehicles.Usage of hydraulic fluid, typically used in working actuators, enables direct-immersion oil cooling of designed electrical machine, and further increases the torque- and power- densities of the whole device.

Topochemistry of physical and chemical pretreatments of biomass as investigated by FE-SEM, XPS and ToF-SIMS

Surface chemistry is of great importance in plant biomass engineering and applications. The surface chemical composition of biomass which includes lignin, carbohydrates and extractives influences its interactions with chemical agents, such as pulp processing/papermaking chemicals, or enzymes for different purposes. In this thesis, the changes in the surface chemical composition of lignocellulosic biomass after physical modification for the improvement of resulting paper properties and chemical treatment for the enhancement of enzymatic hydrolysis were investigated. Low consistency (LC) refining was used as physical treatment of bleached softwood and hardwood pulp samples, and the surface chemistry of refined samples was investigated. The refined pulp was analysed as whole pulp while the fines-free fibre samples were characterized separately. The fines produced in LCrefining contributed to an enlarged surface specific area as well as the change of surface coverage by lignin and extractives, as investigated by X-ray photoelectron spectroscopy (XPS). The surface coverage by lignin of the whole pulp decreased after refining while the surface coverage by extractives increased both for pine and eucalyptus. In the case of pine, the removal of fines resulted in reduction of the surface coverage by extractives, while the surface coverage by lignin increased on fibre sample (without fines). In the case of eucalyptus, the surface coverage by lignin of fibre samples decreased after the removal of fines. In addition, the surface distribution of carbohydrates, lignin and extractives of pine and eucalyptus samples was determined by Time-of-Flight Secondary Ion Mass Spectrometry (ToF-SIMS). LC-refining increased the amounts of pentose, hexose and extractives on the surface of pine samples. ToF-SIMS also gave clear evidence about xylan deposition and reduction of surface lignin distribution on the fibre of eucalyptus. However, the changes in the surface chemical composition during the physical treatment has led to an increase in the adsorption of fluorescent whitening agents (FWAs) on fibres due to a combination of electro-static forces, specific surface area of fibres and hydrophobic interactions. Various physicochemical pretreatments were conducted on wood and non-wood biomass for enhancing enzymatic hydrolysis of polysaccharides, and the surface chemistry of the pretreated and enzymatically hydrolysed samples was investigated by field emission scanning electron microscopy (FE-SEM), XPS and ToF-SIMS. A hydrotrope was used as a relatively novel pretreatment technology both in the case of wood and non-wood biomass. For comparison, ionic liquid and hydrothermal pretreatments were applied on softwood and hardwood as well. Thus, XPS analysis showed that the surface lignin was more efficiently removed by hydrotropic pretreatment compared to ionic liquid or hydrothermal pretreatments. SEM analysis also found that already at room temperature the ionic liquid pretreatments were more effective in swelling the fibres compared with hydrotropic pretreatment at elevated temperatures. The enzymatic hydrolysis yield of hardwood was enhanced due to the decrease in surface coverage of lignin, which was induced by hydrotropic treatment. However, hydrotropic pretreatment was not appropriate for softwood because of the predominance of guaiacyl lignin structure in this material. In addition, the reduction of surface lignin and xylan during pretreatment and subsequent increase in cellulose hydrolysis by enzyme could be observed from ToF-SIMS results. The characterisation of the non-wood biomass (e.g. sugarcane bagasse and common reed) treated by hydrotropic method, alkaline and alkaline hydrogen peroxide pretreatments were carried out by XPS and ToF-SIMS. According to the results, the action for the removal of the surface lignin of non-wood biomass by hydrotropic pretreatment was more significant compared to alkaline and alkaline hydrogen peroxide pretreatments, although a higher total amount of lignin could be removed by alkaline and alkaline hydrogen peroxide pretreatment. Furthermore, xylan could be remarkably more efficiently removed by hydrotropic method. Therefore, the glucan yield achieved from hydrotropic treated sample was higher than that from samples treated with alkaline or alkaline hydrogen peroxide. Through the use of ToF-SIMS, the distribution and localization of lignin and carbohydrates on the surface of ignocelluloses during pretreatment and enzymatic hydrolysis could be detected, and xylan degradation during enzymatic hydrolysis could also be assessed. Thus, based on the results from XPS and ToF-SIMS, the mechanism of the hydrotropic pretreatment in improving the accessibility of enzymes to fibre and further ameliorating of the enzymatic saccharification could be better elucidated.