Factors Affecting Consumer’s Illicit Purchase of Copyrighted Digital Work

Peer-to-Peer (P2P) technology has revolutionized file exchange activities besides enhancing processing power distribution. As such, this technology which is nowadays made freely available to all internet users also imposes a threat as it enables the illegal distribution of copyrighted digital work. P2P technology continuously evolves in a greater pace than copyright legislation, leading to compatibility gaps between the applicability of copyright law and the illicit file sharing and downloading. Such issues give high incentives to consumers to practise piracy using P2P systems with a low perception of risk towards prosecution, leading to substantial losses for copyright owners. This study focuses on developing insights for content owners on consumer behaviour towards piracy in Finland, where quantitative analyses are assessed using a data set based on a survey conducted by the Helsinki Institute for IT. The research approach investigates the significance of three fundamental areas in relation to evaluate consumer behaviour as: environmental-related factors, innovation-related factors and consumer-related. each of these are integrates concepts derived in previous theoretical models such as the technology acceptance model, theory of reasoned action, theory of planned behaviour, the issue-risk-judgement model and the Hunt & Vitell’s model.

Multilevel converter modulation: implementation and analysis

Multilevel converters provide an attractive solution to bring the benefits of speed-controlled rotational movement to high-power applications. Therefore, multilevel inverters have attracted wide interest in both the academic community and in the industry for the past two decades. In this doctoral thesis, modulation methods suitable especially for series connected H-bridge multilevel inverters are discussed. A concept of duty cycle modulation is presented and its modification is proposed. These methods are compared with other well-known modulation schemes, such as space-vector pulse width modulation and carrier-based modulation schemes. The advantage of the modified duty-cycle modulation is its algorithmic simplicity. A similar mathematical formulation for the original duty cycle modulation is proposed. The modified duty cycle modulation is shown to produce well-formed phase-to-neutral voltages that have lower total harmonic distortion than the space-vector pulse width modulation and the duty cycle modulation. The space-vector-based solution and the duty cycle modulation, on the other hand, result in a better-quality line-to-line voltage and current waveform. The voltage of the DC links in the modules of the series-connected H-bridge inverter are shown to fluctuate while they are under load. The fluctuation causes inaccuracies in the voltage production, which may result in a failure of the flux estimator in the controller. An extension for upper-level modulation schemes, which changes the switching instants of the inverter so that the output voltage meets the reference voltage accurately regardless of the DC link voltages, is proposed. The method is shown to reduce the error to a very low level when a sufficient switching frequency is used. An appropriate way to organize the switching instants of the multilevel inverter is to make only one-level steps at a time. This causes restrictions on the dynamical features of the modulation schemes. The produced voltage vector cannot be rotated several tens of degrees in a single switching period without violating the above-mentioned one-level-step rule. The dynamical capabilities of multilevel inverters are analyzed in this doctoral thesis, and it is shown that the multilevel inverters are capable of operating even in dynamically demanding metal industry applications. In addition to the discussion on modulation schemes, an overvoltage in multilevel converter drives caused by cable reflection is addressed. The voltage reflection phenomenon in drives with long feeder cables causes premature insulation deterioration and also affects the commonmode voltage, which is one of the main reasons for bearing currents. Bearing currents, on the other hand, cause fluting in the bearings, which results in premature bearing failure. The reflection phenomenon is traditionally prevented by filtering, but in this thesis, a modulationbased filterless method to mitigate the overvoltage in multilevel drives is proposed. Moreover, the mitigation method can be implemented as an extension for upper-level modulation schemes. The method exploits the oscillations caused by two consecutive voltage edges so that the sum of the oscillations results in a mitigated peak of the overvoltage. The applicability of the method is verified by simulations together with experiments with a full-scale prototype.

The Digital Book as a Disruptive Innovation

Whether digital book will become the dominant design of books and be a widely accepted format for reading is a question that is currently asked by every e-publisher, publishing industry worker and many book consumers. This study is the first to holistically approach Christensen’s disruptive innovation theory for an instrument of measuring the phenomenon of the digital book. The disruptiveness of an innovation could be measured by it’s disruptive potential and the disruption process it passes. The empirical part of the thesis is designed so to investigate the digital book‘s features as an innovation for disruptive potential and then the current digital book market, monitoring it for disruption processes. Proving that the digital book is a disruptive innovation may allow understanding it’s prospects and even help in making a pattern of the innovation’s market infiltration in the future. The framework created for answering the research question could also be used in a similar way to analyze other E-publishing products (e.g. e-newspapers, emagazines).

Tuotantofilosofiat

Työssä esitellään käytetyimpiä tuotantofilosofioita. Tuotantofilosofia on hyvin laaja käsite ja sen vuoksi myös jotkin esiteltävistä menetelmistä ovat hyvin kaukana toisistaan. Työ koostuu teoriaosiosta, jossa on esitelty kukin tuotantofilosofia ja lopuksi johtopäätöksiä-osiossa käsitellään sitä, kuinka menetelmät liittyvät toisiinsa. Työssä esitellään JIT/JOT-tuotanto, Lean-tuotanto, Monozukuri, Modulointi, Standardointi, Strategiatyö, Six Sigma, TQM, TPM, QFD, MFD, Simulointi, Digitaalinen valmistus, DFX ja ns. uudet tuotantofilosofiat. Eri menetelmistä löytyvää lähdemateriaalia on tarjolla monipuolisesti, josta johtuen menetelmistä on voitu esitellä vain pääpiirteet. Tuotantofilosofioiden avulla voidaan saavuttaa monia eri asioita. Osa menetelmistä on luotu tuotannon tehostamiseksi ja yksinkertaistamiseksi, osa puolestaan lisää tuotannon tai koko yrityksen laatutasoa ja osa puolestaan helpottaa tuotteiden suunnittelu-työtä. Moni esiteltävistä filosofioista ei istu yksinomaan yhteen edellä mainituista kategorioista vaan kattaa laajempia alueita pitäen sisällään jopa kaikkia kolmea mainittua tulosta. Näiden lisäksi työssä on esitelty lyhyesti uusia tuotantofilosofioita, jotka ovat hieman irrallisia kokonaisuuksia verrattuna muihin työssä esiteltäviin filosofioihin. Työn tarkoituksena on auttaa hahmottamaan suurta kokonaisuutta jonka tuotantofilosofiat tuottavat. On tärkeää osata hahmottaa filosofioiden riippuvuus toisistaan ja se, että otettaessa käyttöön jotain tuotantofilosofiaa, tarkoittaa se myös mahdollisesti monen muunkin asian huomioonottamista. Tätä näkökantaa selvennetään johtopäätöksissä.

Viral and cellular modulation of virus-induced apoptosis in experimental infection models

The aim of this study was to investigate herpes simplex virus type 1 (HSV-1)- and measles virus (MV)-induced cell death. HSV-1 with deletion in genes encoding infected cell protein (ICP)4 and protein kinase Us3 (d120) induced apoptosis and cathepsin activation in epithelial (HEp-2) and monocytic (U937) cells. Inhibition of cathepsin activity decreased the amount of d120-induced apoptosis indicating that d120-induced apoptosis could be cathepsin-mediated. Also, HSV-1 infection increased caspase activation suggesting that d120-induced apoptosis is probably caspase-mediated. Cystatin treatment decreased the activity of cathepsins and the replication of HSV-1 indicating that cathepsins contribute to HSV-1 infection. Interestingly, d120 induced also necroptosis in monocytic cells. This is the first report on necroptosis in HSV-1- infected cells. MV induced apoptosis in uninfected bystander T lymphocytes, probably via interaction of MV-infected monocytes with uninfected lymphocytes. The expression of death receptor Fas was clearly increased on the surface of lymphocytes. The number of apoptotic cells and the activation of cathepsins and caspases were increased in MVinfected U937 cells suggesting that MV-induced apoptosis could be cathepsin- and caspase-mediated. Cystatin treatment inhibited cathepsin activities but not MV-induced apoptosis. Besides HSV-1-induced apoptosis, innate immune responses were studied in HSV-1-infection. HSV-1 viruses with either ICP4 and Us3, or Us3 deletion only, increased the expression of Toll-like receptor (TLR)3 and stimulated its downstream pathways leading to increased expression of type I interferon gene and to functional interferons. These findings suggest that besides controlling apoptosis, HSV-1 ICP4 and Us3 genes are involved in the control of TLR3 response in infected cell.

Consistency and change in Finnish broadcasting policy : the implementation of digital television and lessons from the Canadian experience

Konsistens och förändring i finländsk etermediapolitik. Implementering av digital television och en jämförelse med Kanada Avhandlingen handlar om hur det finländska televisionssystemet förändrades i slutet av 1990-talet från en nationell institution till ett dualistiskt system som präglas av stark marknadsorientering. Syftet med avhandlingen är att förstå på vilket sätt en så snabb förändring kunde ske och analysera de institutionella faktorerna bakom utvecklingen. På teoretisk nivå diskuteras tesen om det nära sambandet mellan statliga politiska institutioner och rundradioverksamhetens institutioner. Avhandlingen består av två fallstudier. Den första sätter fokus på de första åren av den finländska televisionens digitaliseringsprocess som startade med starka industriell-nationalistiska motiveringar. Analysen, som baserar på offentliga dokument, sträcker sig framtill hösten 2001 då de digitala televisionssändningarna startade och regeringspropositionen om den nya kommunikationsmarknadslagen lämnades till riksdagen. Dessa policy-processer analyseras som en ”marknadisering” av de traditionella styrningsprinciper och idéer gällande finländsk rundradioverksamheten. En jämförelse mellan Finlands och Kanadas nationella rundradiopolitik gör att man kan koppla slutsatserna till den internationella utvecklingen. Jämförelsen visar hur kommunikationspolitiska linjen i de två länderna har kommit att likna varandra trots att ländernas tv-system och deras styrordningar är mycket olika. Exemplet med Kanada visar att den särskilda teknologin inte är viktig utan snarare de kommersiella intressen som står bakom och som beslutsfattare gärna döljer i en nationalistisk retorik. Studien visar att det är viktigt att beakta vilken tyngd man i politiken ger de två sidor som rundradioverksamheten består av: sändningsteknologin och verksamheten som en speciell kulturform. Nationalstatens handlingsutrymme minskar inom fältet om målet är att vara framgångsrik i konkurrensen i den nya internationella ekonomin. Enligt de nyliberalistiska principer som det politiska systemet överlag har tillägnat sig det är önskvärd men också helt inhemska institutionella traditioner och praxis som följdes i den finländska digitaliseringsprocessen främjade utvecklingen som ledde till att nästan alla ursprungliga nationella syften föll sönder.

Costs and Benefits of a Shared Digital Long-Term Preservation System

Paper presented at the 40th Annual Conference of LIBER (Ligue des Bibliothèques Européennes de Recherche - Association of European Research Libraries) on July 1st, 2011; with the slides used at the presentation.

A Technique for Digital Color Image Watermarking Using ICA

With the increase of use of digital media the need for the methods of multimedia protection becomes extremely important. The number of the solutions to the problem from encryption to watermarking is large and is growing every year. In this work digital image watermarking is considered, specifically a novel method of digital watermarking of color and spectral images. An overview of existing methods watermarking of color and grayscale images is given in the paper. Methods using independent component analysis (ICA) for detection and the ones using discrete wavelet transform (DWT) and discrete cosine transform (DCT) are considered in more detail. A novel method of watermarking proposed in this paper allows embedding of a color or spectral watermark image into color or spectral image consequently and successful extraction of the watermark out of the resultant watermarked image. A number of experiments have been performed on the quality of extraction depending on the parameters of the embedding procedure. Another set of experiments included the test of the robustness of the algorithm proposed. Three techniques have been chosen for that purpose: median filter, low-pass filter (LPF) and discrete cosine transform (DCT), which are a part of a widely known StirMark - Image Watermarking Robustness Test. The study shows that the proposed watermarking technique is fragile, i.e. watermark is altered by simple image processing operations. Moreover, we have found that the contents of the image to be watermarked do not affect the quality of the extraction. Mixing coefficients, that determine the amount of the key and watermark image in the result, should not exceed 1% of the original. The algorithm proposed has proven to be successful in the task of watermark embedding and extraction.

Future revenue models: Transformation from textbooks to digital solutions in the educational publishing industry, Case Sanoma Learning

This study was conducted in order to learn how companies’ revenue models will be transformed due to the digitalisation of its products and processes. Because there is still only a limited number of researches focusing solely on revenue models, and particularly on the revenue model change caused by the changes at the business environment, the topic was initially approached through the business model concept, which organises the different value creating operations and resources at a company in order to create profitable revenue streams. This was used as the base for constructing the theoretical framework for this study, used to collect and analyse the information. The empirical section is based on a qualitative study approach and multiple-case analysis of companies operating in learning materials publishing industry. Their operations are compared with companies operating in other industries, which have undergone comparable transformation, in order to recognise either similarities or contrasts between the cases. The sources of evidence are a literature review to find the essential dimensions researched earlier, and interviews 29 of managers and executives at 17 organisations representing six industries. Based onto the earlier literature and the empirical findings of this study, the change of the revenue model is linked with the change of the other dimen-sions of the business model. When one dimension will be altered, as well the other should be adjusted accordingly. At the case companies the transformation is observed as the utilisation of several revenue models simultaneously and the revenue creation processes becoming more complex.

Costs and Benefits of a Shared Digital Long-Term Preservation System

This paper describes the cost-benefit analysis of digital long-term preservation (LTP) that was carried out in the context of the Finnish National Digital Library Project (NDL) in 2010. The analysis was based on the assumption that as many as 200 archives, libraries, and museums will share an LTP system. The term ‘system’ shall be understood as encompassing not only information technology, but also human resources, organizational structures, policies and funding mechanisms. The cost analysis shows that an LTP system will incur, over the first 12 years, cumulative costs of €42 million, i.e. an average of €3.5 million per annum. Human resources and investments in information technology are the major cost factors. After the initial stages, the analysis predicts annual costs of circa €4 million. The analysis compared scenarios with and without a shared LTP system. The results indicate that a shared system will have remarkable benefits. At the development and implementation stages, a shared system shows an advantage of €30 million against the alternative scenario consisting of five independent LTP solutions. During the later stages, the advantage is estimated at €10 million per annum. The cumulative cost benefit over the first 12 years would amount to circa €100 million.

Digitisation at NLF and the National Digital Library

Esitys Bulgarian kirjastoseuran seminaarissa 15.3.2012

Loss Modelling of Three-Level Inverters controlled with Space Vector Modulation Technique

The objective of this master’s thesis is to investigate the loss behavior of three-level ANPC inverter and compare it with conventional NPC inverter. The both inverters are controlled with mature space vector modulation strategy. In order to provide the comparison both accurate and detailed enough NPC and ANPC simulation models should be obtained. The similar control model of SVM is utilized for both NPC and ANPC inverter models. The principles of control algorithms, the structure and description of models are clarified. The power loss calculation model is based on practical calculation approaches with certain assumptions. The comparison between NPC and ANPC topologies is presented based on results obtained for each semiconductor device, their switching and conduction losses and efficiency of the inverters. Alternative switching states of ANPC topology allow distributing losses among the switches more evenly, than in NPC inverter. Obviously, the losses of a switching device depend on its position in the topology. Losses distribution among the components in ANPC topology allows reducing the stress on certain switches, thus losses are equally distributed among the semiconductors, however the efficiency of the inverters is the same. As a new contribution to earlier studies, the obtained models of SVM control, NPC and ANPC inverters have been built. Thus, this thesis can be used in further more complicated modelling of full-power converters for modern multi-megawatt wind energy conversion systems.