CREATING A MODEL FOR INVENTORY MANAGEMENT SYSTEM

Tutkielman tarkoituksena oli mallintaa varastonhallintajärjestelmä, joka olisi sopiva case yritykselle. Tutkimus aloitettiin case yrityksen varastonhallinan nykytilan kartoituksella, jonka jälkeen tutkittiin varastonhallinnan eri osa-alueisiin. Varastonhallinnan osa-alueista käsiteltiin varastotyyppejä, motiiveja, tavoitteita, kysynnän ennustamista sekä erilaisia varastonhallinnan työkaluja. Sen lisäksi tutkittiin erilaisia varaston täydennysmalleja. Teoriaosuudessa käsiteltiin lisäksi kolmea erilaista tietojärjestelmätyyppiä: toiminnanohjausjärjestelmää, sähköisen kaupankäynnin järjestelmää sekä räätälöityä järjestelmää. Tutkimussuunnitelmassa nämä kolme järjestelmää rajattiin vaihtoehdoiksi, joista jokin valittaisiin case yrityksen varastonhallintajärjestelmäksi. Teorian ja nykytilan pohjalta tehtiin viitekehys, jossa esiteltiin varastonhallintajärjestelmän tieto- ja toiminnallisuusominaisuuksia. Nämä ominaisuudet priorisoitiin neljään eri luokkaan ominaisuuden kriittisyyden mukaan. Järjestelmävaihtoehdot arvioitiin viitekehyksen kriteerien mukaisesti, miten helposti ominaisuudet olisivat toteutettavissa eri vaihtoehdoissa. Tulokset laskettiin näiden arviointien perusteella, jonka jälkeen tulosten analysoinnissa huomattiin, että toiminnanohjausjärjestelmä sopisi parhaiten case yrityksen varastonhallintajärjestelmäksi.

Test automation of digital mammography device

Testing of a complex software is time consuming. Automated tools are available quite a lot for desktop applications, but for embedded systems a custom-made tool is required Building a complete test framework is a complicated task. Therefore, the test platform was built on top of an already existing tool, CANoe. CANoe is a tool for CAN bus analysis and node simulation. The functionality of CANoe was extended with LabVIEW DLL. The LabVIEW software was used for simulating hardware components of the embedded device As a result of the study, a platform was created where tests could be automated. Of the current test plan, 10 percent were automated and up to 60 percent could be automated with the current functionality.

Tullin tuonnin palvelujen epäyhtenäisten käytäntöjen analysointi

Työn tarkoituksena on analysoida Tulli tuonnin palveluissa esiintyviä epäyhtenäi siä käytäntöjä Tullihallituksen Ulkomaankauppaosaston asiakas- ja luotonhallin tayksikölle. Tutkimuksen pohjustamiseksi työssä on ensin määritelty palvelu, asiakashallinta ja Customer Relationship Management (CRM) kirjallisuuden pe rusteella sekä tutkimuksessa käytetty SERVQUAL-työkalu ja kuiluanalyysimalli. Näiden perusteella on luotu tutkimuksessa käytetty kysely. Kyselyssä kysyttiin missä tuonnin palveluissa epäyhtenäisiä käytäntöjä on havait tu, mistä ne johtuvat ja mandollisia keinoja niiden poistamiseen. SERVQUAL työkalulla tutkittiin koetun palvelun laatua 19 kysymyksellä Tullin tuonnin palve luiden odotuksista ja kokemuksista. Kyselyn tuloksista havaittiin Tullin tuonnin palveluissa olevan koetun palvelun kuilu eli odotettu palvelu ei ole vastannut ko kemuksia. Myös organisaatiosta johtuvia kuiluja havaittiin Tullin työntekijöille osoitetussa kyselyssä.

A Co-Processor Approach for Efficient Java Execution in Embedded Systems

This thesis deals with a hardware accelerated Java virtual machine, named REALJava. The REALJava virtual machine is targeted for resource constrained embedded systems. The goal is to attain increased computational performance with reduced power consumption. While these objectives are often seen as trade-offs, in this context both of them can be attained simultaneously by using dedicated hardware. The target level of the computational performance of the REALJava virtual machine is initially set to be as fast as the currently available full custom ASIC Java processors. As a secondary goal all of the components of the virtual machine are designed so that the resulting system can be scaled to support multiple co-processor cores. The virtual machine is designed using the hardware/software co-design paradigm. The partitioning between the two domains is flexible, allowing customizations to the resulting system, for instance the floating point support can be omitted from the hardware in order to decrease the size of the co-processor core. The communication between the hardware and the software domains is encapsulated into modules. This allows the REALJava virtual machine to be easily integrated into any system, simply by redesigning the communication modules. Besides the virtual machine and the related co-processor architecture, several performance enhancing techniques are presented. These include techniques related to instruction folding, stack handling, method invocation, constant loading and control in time domain. The REALJava virtual machine is prototyped using three different FPGA platforms. The original pipeline structure is modified to suit the FPGA environment. The performance of the resulting Java virtual machine is evaluated against existing Java solutions in the embedded systems field. The results show that the goals are attained, both in terms of computational performance and power consumption. Especially the computational performance is evaluated thoroughly, and the results show that the REALJava is more than twice as fast as the fastest full custom ASIC Java processor. In addition to standard Java virtual machine benchmarks, several new Java applications are designed to both verify the results and broaden the spectrum of the tests.

Defining a framework model to determine total costs of managed desktops using ITIL best practices

In modern day organizations there are an increasing number of IT devices such as computers, mobile phones and printers. These devices can be located and maintained by using specialized IT management applications. Costs related to a single device accumulate from various sources and are normally categorized as direct costs like hardware costs and indirect costs such as labor costs. These costs can be saved in a configuration management database and presented to users using web based development tools such as ASP.NET. The overall costs of IT devices during their lifecycle can be ten times higher than the actual purchase price of the product and ability to define and reduce these costs can save organizations noticeable amount of money. This Master’s Thesis introduces the research field of IT management and defines a custom framework model based on Information Technology Infrastructure Library (ITIL) best practices which is designed to be implemented as part of an existing IT management application for defining and presenting IT costs.

The Methods of Possible Joint Treatment of Manure and Sewage Sludge in the Leningrad Region

The nutrient load to the Gulf of Finland has started to increase as a result of the strong economic recovery in agriculture and livestock farming in the Leningrad region. Also sludge produced from municipal wastewater treatment plant of the Leningrad region causes the great impact on the environment, but still the main options for its treatment is disposal on the sludge beds or Landfills. The aim of this study was to evaluate the implementation of possible joint treatment methods of manure form livestock and poultry enterprises and sewage sludge produced from municipal wastewater treatment plants in the Leningrad region. The study is based on published data. The most attention was put on the anaerobic digestion and incineration methods. The manure and sewage sludge generation for the whole Leningrad region and energy potential produced from their treatment were estimated. The calculations showed that total amount of sewage sludge generation is 1 348 000 t/a calculated on wet matter and manure generation is 3 445 000 t/a calculated on wet matter. The potential heat release from anaerobic digestion process and incineration process is 4 880 000 GJ/a and 5 950 000 GJ/a, respectively. Furthermore, the work gives the overview of the general Russian and Finnish legislation concerning manure and sewage sludge treatment. In the Gatchina district it was chosen the WWTP and livestock and poultry enterprises for evaluation of the centralized treatment plant implementation based on anaerobic digestion and incineration methods. The electricity and heat power of plant based on biogas combustion process is 4.3 MW and 7.8 MW, respectively. The electricity and heat power of plant based on manure and sewage sludge incineration process is 3.0 MW and 6.1 MW, respectively.

Design and Implementation of MUPE Server Context Tool for Eclipse IDE

The development of software tools begun as the first computers were built. The current generation of development environments offers a common interface to access multiple software tools and often also provide a possibility to build custom tools as extensions to the existing development environment. Eclipse is an open source development environment that offers good starting point for developing custom extensions. This thesis presents a software tool to aid the development of context-aware applications on Multi-User Publishing Environment (MUPE) platform. The tool is implemented as an Eclipse plug-in. The tool allows developer to include external server side contexts to their MUPE applications. The tool allows additional context sources to be added through the Eclipse's extension point mechanism. The thesis describes how the tool was designed and implemented. The implementation consists of tool core component part and an additional context source extension part. Tool core component is responsible for the actual context addition and also provides the needed user interface elements to the Eclipse workbench. Context source component provides the needed context source related information to the core component. As part of the work an update site feature was also implemented for distributing the tool through Eclipse update mechanism.

Projektilaskentamallin kehittäminen rakennusalan pk-yrityksessä

Tutkimuksen kohdeyritys on rakennusalan pk-yritys, jonka liiketoiminta perustuu kokonaan toimitusprojekteille. Tutkimuksen tavoitteena oli kehittää kohdeyrityksen käyttöön helppokäyttöinen projektilaskentamalli, jonka avulla voidaan ennalta tunnistaa kannattamattomat toimitusprojektit. Tutkimuksessa keskitytään projektien kustannusnäkökulmaan. Tutkimus koostuu teoreettisesta kirjallisuusselvityksestä ja empiirisestä tapaustutkimuksesta. Teoreettisen aineiston ja kohdeyrityksen tietojen perusteella rakennettiin laskentamalli, jonka toimintaa tarkasteltiin esimerkkiprojektien avulla. Työn tutkimusote on konstruktiivinen, osin myös toiminta-analyyttinen. Kehitetty laskentamalli kattaa toimitusprojektin koko elinkaaren. Tarjouslaskenta-vaiheessa sen avulla tehdään päätös projektin toteutuskelpoisuudesta. Toteutus- ja seurantavaiheessa taas sillä seurataan projektin toteutuvia lukuja. Kohdeyritys voi laskentamallin avulla tunnistaa kannattamattomia projekteja, sillä tarjoushinnat tarkistetaan täyskatteellisen kustannusarvion avulla ennen projektin toteutuspäätöstä. Määrälaskennan ja täyskatteellisen laskennan ansiosta aiheuttamisperiaatetta noudatetaan kattavammin kuin kohdeyrityksen aiemmassa käytännössä.

The Influence of Certain Processing Factors on the Durability of Yttrium Stabilized Zirconia Used As Dental Biomaterial

In dentistry, yttrium partially stabilized zirconia (ZrO2) has become one of the most attractive ceramic materials for prosthetic applications. The aim of this series of studies was to evaluate whether certain treatments used in the manufacturing process, such as sintering time, color shading or heat treatment of zirconia affect the material properties. Another aim was to evaluate the load-bearing capacity and marginal fit of manually copy-milled custom-made versus prefabricated commercially available zirconia implant abutments. Mechanical properties such as flexural strength and surface microhardness were determined for green-stage milled and sintered yttrium partially stabilized zirconia after different sintering time, coloring process and heat treatments. Scanning electron microscope (SEM) was used for analyzing the possible changes in surface structure of zirconia material after reduced sintering time, coloring and heat treatments. Possible phase change from the tetragonal to the monoclinic phase was evaluated by X-ray diffraction analysis (XRD). The load-bearing capacity of different implant abutments was measured and the fit between abutment and implant replica was examined with SEM. The results of these studies showed that the shorter sintering time or the thermocycling did not affect the strength or surface microhardness of zirconia. Coloring of zirconia decreased strength compared to un-colored control zirconia, and some of the colored zirconia specimens also showed a decrease in surface microhardness. Coloring also affected the dimensions of zirconia. Significantly decreased shrinkage was found for colored zirconia specimens during sintering. Heat treatment of zirconia did not seem to affect materials’ mechanical properties but when a thin coating of wash and glaze porcelain was fired on the tensile side of the disc the flexural strength decreased significantly. Furthermore, it was found that thermocycling increased the monoclinic phase on the surface of the zirconia. Color shading or heat treatment did not seem to affect phase transformation but small monoclinic peaks were detected on the surface of the heat treated specimens with a thin coating of wash and glaze porcelain on the opposite side. Custom-made zirconia abutments showed comparable load-bearing capacity to the prefabricated commercially available zirconia abutments. However, the fit of the custom-made abutments was less satisfactory than that of the commercially available abutments. These studies suggest that zirconia is a durable material and other treatments than color shading used in the manufacturing process of zirconia bulk material does not affect the material’s strength. The decrease in strength and dimensional changes after color shading needs to be taken into account when fabricating zirconia substructures for fixed dental prostheses. Manually copy-milled custom-made abutments have acceptable load-bearing capacity but the marginal accuracy has to be evaluated carefully.

Distributed ControlArchitecture of Power Electronics Building-Block-Based Frequency Converters

The increasing power demand and emerging applications drive the design of electrical power converters into modularization. Despite the wide use of modularized power stage structures, the control schemes that are used are often traditional, in other words, centralized. The flexibility and re-usability of these controllers are typically poor. With a dedicated distributed control scheme, the flexibility and re-usability of the system parts, building blocks, can be increased. Only a few distributed control schemes have been introduced for this purpose, but their breakthrough has not yet taken place. A demand for the further development offlexible control schemes for building-block-based applications clearly exists. The control topology, communication, synchronization, and functionality allocationaspects of building-block-based converters are studied in this doctoral thesis. A distributed control scheme that can be easily adapted to building-block-based power converter designs is developed. The example applications are a parallel and series connection of building blocks. The building block that is used in the implementations of both the applications is a commercial off-the-shelf two-level three-phase frequency converter with a custom-designed controller card. The major challenge with the parallel connection of power stages is the synchronization of the building blocks. The effect of synchronization accuracy on the system performance is studied. The functionality allocation and control scheme design are challenging in the seriesconnected multilevel converters, mainly because of the large number of modules. Various multilevel modulation schemes are analyzed with respect to the implementation, and this information is used to develop a flexible control scheme for modular multilevel inverters.

Sustainable animal production : "suosittelen tuotantoeläinten parissa toimiville"

Kirjallisuusarvostelu

Customized agile development process for embedded software development

Agile software development has grown in popularity starting from the agile manifesto declared in 2001. However there is a strong belief that the agile methods are not suitable for embedded, critical or real-time software development, even though multiple studies and cases show differently. This thesis will present a custom agile process that can be used in embedded software development. The reasons for presumed unfitness of agile methods in embedded software development have mainly based on the feeling of these methods providing no real control, no strict discipline and less rigor engineering practices. One starting point is to provide a light process with disciplined approach to the embedded software development. Agile software development has gained popularity due to the fact that there are still big issues in software development as a whole. Projects fail due to schedule slips, budget surpassing or failing to meet the business needs. This does not change when talking about embedded software development. These issues are still valid, with multiple new ones rising from the quite complex and hard domain the embedded software developers work in. These issues are another starting point for this thesis. The thesis is based heavily on Feature Driven Development, a software development methodology that can be seen as a runner up to the most popular agile methodologies. The FDD as such is quite process oriented and is lacking few practices considered commonly as extremely important in agile development methodologies. In order for FDD to gain acceptance in the software development community it needs to be modified and enhanced. This thesis presents an improved custom agile process that can be used in embedded software development projects with size varying from 10 to 500 persons. This process is based on Feature Driven Development and by suitable parts to Extreme Programming, Scrum and Agile Modeling. Finally this thesis will present how the new process responds to the common issues in the embedded software development. The process of creating the new process is evaluated at the retrospective and guidelines for such process creation work are introduced. These emphasize the agility also in the process development through early and frequent deliveries and the team work needed to create suitable process.

Comparison and Evaluation of Eddy Current Sensors

In the work eddy current sensors are described and evaluated. Theoretical part includes physical basics of the eddy currents, overview of available commercial products and technologies. Industrial sensors operation was assessed based on several working modes. Apart from this, the model was created in Matlab Simulink with Xilinx Blockset and then translated into a Xilinx ISE Design Suite compatible project. The performance of the resulting implementation was compared to the existing implementation in the Xilinx Spartan 3 FPGA board with the custom made sensor. Additionally, an introduction to FPGAs and VHDL is presented.

Transcriptional Profiling of Organ‐Specific Autoimmunity in Human

Our understanding of the pathogenesis of organ‐specific autoinflammation has been restricted by limited access to the target organs. Peripheral blood, however, as a preferred transportation route for immune cells, provides a window to assess the entire immune system throughout the body. Transcriptional profiling with RNA stabilizing blood collection tubes reflects in vivo expression profiles at the time the blood is drawn, allowing detection of the disease activity in different samples or within the same sample over time. The main objective of this Ph.D. study was to apply gene‐expression microarrays in the characterization of peripheral blood transcriptional profiles in patients with autoimmune diseases. To achieve this goal a custom cDNA microarray targeted for gene‐expression profiling of human immune system was designed and produced. Sample collection and preparation was then optimized to allow gene‐expression profiling from whole‐blood samples. To overcome challenges resulting from minute amounts of sample material, RNA amplification was successfully applied to study pregnancy related immunosuppression in patients with multiple sclerosis (MS). Furthermore, similar sample preparation was applied to characterize longitudinal genome‐wide expression profiles in children with type 1 diabetes (T1D) associated autoantibodies and eventually clinical T1D. Blood transcriptome analyses, using both the ImmunoChip cDNA microarray with targeted probe selection and genome‐wide Affymetrix U133 Plus 2.0 oligonucleotide array, enabled monitoring of autoimmune activity. Novel disease related genes and general autoimmune signatures were identified. Notably, down‐regulation of the HLA class Ib molecules in peripheral blood was associated with disease activity in both MS and T1D. Taken together, these studies demonstrate the potential of peripheral blood transcriptional profiling in biomedical research and diagnostics. Imbalances in peripheral blood transcriptional activity may reveal dynamic changes that are relevant for the disease but might be completely missed in conventional cross‐sectional studies.

Rural Food System Change in Tanzania during the Post-Ujamaa Era. A Case Study from Western Bagamoyo District

Food systems in Sub-Saharan Africa have been rapidly transforming during the recent decades with diverse outcomes on human development and environment. This study explores the food system change in rural villages in eastern Tanzania where subsistence agriculture has traditionally been the main source of livelihood. The focus is on the salient changes in the spatial dimensions and structural composition of the food system in the context of economic liberalization that has taken place after the end of the socialist ujamaa era in the mid-1980s. In addition, the linkages of the changes are examined in relation to food security, socio-economic situation, livelihoods, and local environment. The approach of the study is geographical, but also involves various multi-disciplinary elements, particularly from development studies. The research methods included thematic and questionnaire interviews, participatory tools, and the analysis of land use/ cover data and official documents. Several earlier studies that were made in the area during the late 1970s and 1980s provided an important reference base. The study shows that subsistence farming has lost its dominant role in food provisioning due to the declining productivity of land, livestock losses, and the increasing shift of labour to non-farm sectors. Also rapid population growth has added to the pressure on land and other natural resources. Despite the increasing need for money for buying marketed foods and other necessities, the nutritional situation shows improvement and severe malnutrition has diminished. However, the long-term sustainability of this transformation raises concerns. Firstly, the food security situation continues to be fragile and prone to shocks such as adverse climatic conditions, crop failures and price hikes. Secondly, the commodification of the food system and livelihoods in general is linked to rapid environmental degradation in the area, particularly the loss of soil fertility and deforestation. The situation calls for efforts that take more determined and holistic approaches towards sustainable development of the rural food system with particular focus on the role and viability of small-scale farming.