Social capital and health : variations, associations and challenges

Although social capital and health have been extensively studied during the last decade, there are still open issues in current empirical research. These concern for instance the measurement of the concept in different contexts, as well as the association between different types of social capital and different dimensions of health. The present thesis addressed these questions. The general aim was to promote the understanding of social capital and health by investigating the oldest old and the two major language groups in Finland, Swedish- and Finnish-speakers. Another aim was to contribute to the discussion on methodological issues in social capital and health research. The present thesis investigated two empirical data sets, Umeå 85+ and Health 2000. The Umeå 85+ study was a cross-sectional study of 163 individuals aged 85, 90, and 95 or older, living in the municipality of Umeå, Sweden, in the year of 2000. The Health 2000 survey was a national study of 8,028 persons aged 30 or above carried out in Finland in 2000-2001. Different indicators of structural (e.g. social contacts) and cognitive (e.g. trust) social capital, as well as health indicators were used as variables in the analyses. The Umeå 85+ data set was analyzed with factor analysis, as well as univariate and multivariate analysis of variance. The Health 2000 data was analyzed with logistic regression techniques. The results showed that the Swedish-speakers in the Finnish data set Health 2000 had consistently higher prevalence of social capital compared to the Finnish-speakers even after controlling for central sociodemographic variables. The results further showed that even if the language group differences in health were small, the Swedishspeakers experienced in general better self-reported health compared with the Finnish-speakers. Common sociodemographic variables could not explain these observed differences in health. The results imply that social capital is often, but not always, associated with health. This was clearly seen in the Umeå 85+ data set where only one health indicator (depressive symptoms) was associated with structural social capital among the oldest old. The results based on the analysis of the Health 2000 survey demonstrated that the cognitive component of social capital was associated with self-rated health and psychological health rather than with participation in social activities and social contacts. In addition, social capital statistically reduced the health advantage especially for Swedish-speaking men, indicating that high prevalence of social capital may promote health. Finally, the present thesis also discussed the issue of methodological challenges faced with when analyzing social capital and health. It was suggested that certain components of social capital such as bonding and bridging social capital may be more relevant than structural and cognitive components when investigating social capital among the two language groups in Finland. The results concerning the oldest old indicated that the structural aspects of social capital probably reflect current living conditions, whereas cognitive social capital reflects attitudes and traits often acquired decades earlier. This is interpreted as an indication of the fact that structural and cognitive social capital are closely related yet empirically two distinctive concepts. Taken together, some components of social capital may be more relevant to study than others depending on which population group and age group is under study. The results also implied that the choice of cut-off point of dichotomization of selfrated health has an impact on the estimated effects of the explanatory variables. When the whole age interval, 35-64 years, was analyzed with logistic regression techniques the choice of cut-off point did not matter for the estimated effects of marital status and educational level. The results changed, however, when the age interval was divided into three shorter intervals. If self-rated health is explored using wide age intervals that do not account for age-dependent covariates there is a risk of drawing misleading conclusions. In conclusion, the results presented in the thesis suggest that the uneven distribution of social capital observed between the two language groups in Finland are of importance when trying to further understand health inequalities that exist between Swedish- and Finnish-speakers in Finland. Although social capital seemed to be relevant to the understanding of health among the oldest old, the meaning of social capital is probably different compared to a less vulnerable age group. This should be noticed in future empirical research. In the present thesis, it was shown that the relationship between social capital and health is complex and multidimensional. Different aspects of social capital seem to be important for different aspects of health. This reduces the possibility to generalize the results and to recommend general policy implementations in this area. An increased methodological awareness regarding social capital as well as health are called for in order to further understand the cfomplex association between them. However, based on the present data and findings social capital is associated with health. To understand individual health one must also consider social aspects of the individuals’ environment such as social capital.

Bonding of Composite Resin to Alumina and Zirconia Ceramics with Special Emphasis on Surface Conditioning and Use of Coupling Agents

Dental oxide ceramics have been inspired by their biocompability and mechanical properties which have made durable all-ceramic structures possible. Clinical longevity of the prosthetic structures is dependent on effective bonding with luting cements. As the initial shear bond strength values can be comparable with several materials and procedures, long-term durability is affected by ageing. Aims of the current study were: to measure the shear bond strength of resin composite-to-ceramics and to evaluate the longevity of the bond; to analyze factors affecting the bond, with special emphasis on: the form of silicatization of the ceramic surface; form of silanization; type of resin primer and the effect of the type of the resin composite luting cement; the effect of ageing in water was studied regarding its effect to the endurance of the bond. Ceramic substrates were alumina and yttrium stabilized zirconia. Ceramic conditioning methods included tribochemical silicatization and use of two silane couplings agents. A commercial silane primer was used as a control silane. Various combinations of conditioning methods, primers and resin cements were tested. Bond strengths were measured by shear bond strength method. The longevity of the bond was generally studied by thermocycling the materials in water. Additionally, in one of the studies thermal cycling was compared with long-term water storaging. Results were analysed statistically with ANOVA and Weibull analysis. Tribochemical treatment utilizing air pressure of 150 kPa resulted shear bond strengths of 11.2 MPa to 18.4 MPa and air pressure of 450 kPa 18.2 MPa to 30.5 MPa, respectively. Thermocycling of 8000 cycles or four years water storaging both decreased shear bond strength values to a range of 3.8 MPa to 7.2 MPa whereas initial situation varied from 16.8. Mpa to 23.0 MPa. The silane used in studies had no statistical significance. The use of primers without 10-MDP resulted spontaneous debonding during thermocycling or shear bond strengths below 5 MPa. As conclusion, the results showed superior long-term bonding with primers containing 10-MDP. Silicatization with silanizing showed improved initial shear bond strength values which considerably decreased with ageing in water. Thermal cycling and water storing for up to four years played the major role in reduction of bond strength, which could be due to thermal fatigue of the bonding interface and hydrolytic degradation of the silane coupled interface.

Predicting Market Crashes: An Examination of the Performance of Macroeconomic Indicators and Technical Analysis

The purpose of this study is to examine macroeconomic indicators‟ and technical analysis‟ ability to signal market crashes. Indicators examined were Yield Spread, The Purchasing Managers Index and the Consumer Confidence Index. Technical Analysis indicators were moving average, Moving Average Convergence-Divergence and Relative Strength Index. We studied if commonly used macroeconomic indicators can be used as a warning system for a stock market crashes as well. The hypothesis is that the signals of recession can be used as signals of stock market crash and that way a basis for a hedging strategy. The data is collected from the U.S. markets from the years 1983-2010. Empirical studies show that macroeconomic indicators have been able to explain the future GDP development in the U.S. in research period and they were statistically significant. A hedging strategy that combined the signals of yield spread and Consumer Confidence Index gave most useful results as a basis of a hedging strategy in selected time period. It was able to outperform buy-and-hold strategy as well as all of the technical indicator based hedging strategies.

Testate amoebae (thecamoebians) as indicators of aquatic mine impact

The environmental impacts of a single mine often remain local, but acidic and metal-rich acid mine drainage (AMD) from the waste materials may pose a serious threat to adjacent surface waters and their ecosystems. Testate amoebae (thecamoebian) analysis was used together with lake sediment geochemistry to study and evaluate the ecological effects of sulphidic metal mines on aquatic environments. Three different mines were included in the study: Luikonlahti Cu-mine in Kaavi, eastern Finland, Haveri Cu-Au mine in Ylöjärvi, southern Finland and Pyhäsalmi Zn-Cu-S mine in Pyhäjärvi, central Finland. Luikonlahti and Haveri are closed mines, but Pyhäsalmi is still operating. The sampling strategy was case specific, and planned to provide a representative sediment sample series to define natural background conditions, to detect spatial and temporal variations in mine impacts, to evaluate the possible recovery after the peak contamination, and to distinguish the effects of other environmental factors from the mining impacts. In the Haveri case, diatom analyses were performed alongside thecamoebian analysis to evaluate the similarities and differences between the two proxies. The results of the analyses were investigated with multivariate methods (direct and indirect ordinations, diversity and distance measure indices). Finally, the results of each case study were harmonized, pooled, and jointly analyzed to summarize the results for this dissertation. Geochemical results showed broadly similar temporal patterns in each case. Concentrations of ions in the pre-disturbance samples defined the natural baseline against which other results were compared. The beginning of the mining activities had only minor impacts on sediment geochemistry, mainly appearing as an increased clastic input into the lakes at Haveri and Pyhäsalmi. The active mining phase was followed by the metallic contamination and, subsequently, by the most recent change towards decreased but still elevated metal concentrations in the sediments. Because of the delay in the oxidation of waste material and formation of AMD, the most intense, but transient metal contamination phase occurred in the post-mining period at Luikonlahti and Haveri. At Pyhäsalmi, the highest metal contamination preceded effluent mitigation actions. Spatial gradients were observed besides the temporal evolution in both the pre-disturbance and mine-impacted samples from Luikonlahti and Pyhäsalmi. The geochemical gradients varied with distance from the main source of contaminants (dispersion and dilution) and with water depth (redox and pH). The spatial extent of the highest metal contamination associated with these mines remained rather limited. At Haveri, the metallic impact was widespread, with the upstream site in another lake basin found to be contaminated. Changes in thecamoebian assemblages corresponded well with the geochemical results. Despite some differences, the general features and ecological responses of the faunal assemblages were rather similar in each lake. Constantly abundant strains of Difflugia oblonga, Difflugia protaeiformis and centropyxids formed the core of these assemblages. Increasing proportions of Cucurbitella tricuspis towards the surface samples were found in all of the cases. The results affirmed the indicator value of some already known indicator forms, but such as C. tricuspis and higher nutrient levels, but also elicited possible new ones such as D. oblonga ‘spinosa’ and clayey substrate, high conductivity and/or alkalinity, D. protaeiformis ‘multicornis’ and pH, water hardness and the amount of clastic material and Centropyxis constricta ‘aerophila’ and high metal and S concentrations. In each case, eutrophication appeared to be the most important environmental factor, masking the effects of other variables. Faunal responses to high metal inputs in sediments remained minor, but were nevertheless detectable. Besides the trophic state of the lake, numerical methods suggested overall geochemical conditions (pH, redox) to be the most important factor at Luikonlahti, whereas the Haveri results showed the clearest connection between metals and amoebae. At Pyhäsalmi, the strongest relationships were found between Ca- and S-rich present loading, redox conditions and substrate composition. Sediment geochemistry and testate amoeba analysis proved to be a suitable combination of methods to detect and describe the aquatic mine impacts in each specific case, to evaluate recovery and to differentiate between the effects of different anthropogenic and natural environmental factors. It was also suggested that aquatic mine impacts can be significantly mitigated by careful design and after-care of the waste facilities, especially by reducing and preventing AMD. The case-specific approach is nevertheless necessary because of the unique characteristics of each mine and variations in the environmental background conditions.

Key performance indicators for successful metadata governance

Metadata in increasing levels of sophistication has been the most powerful concept used in management of unstructured information ever since the first librarian used the Dewey decimal system for library classifications. It remains to be seen, however, what the best approach is to implementing metadata to manage huge volumes of unstructured information in a large organization. Also, once implemented, how is it possible to track whether it is adding value to the company, and whether the implementation has been successful? Existing literature on metadata seems to either focus too much on technical and quality aspects or describe issues with respect to adoption for general information management initiatives. This research therefore, strives to contribute to these gaps: to give a consolidated framework for striving to understand the value added by implementing metadata. The basic methodology used is that of case study, which incorporates aspects of design science, surveys, and interviews in order to provide a holistic approach to quantitative and qualitative analysis of the case. The research identifies the various approaches to implementing metadata, particularly studying the one followed by the unit of analysis of case study, a large company in the Oil and Gas Sector. Of the three approaches identified, the selected company already follows an approach that appears to be superior. The researcher further explores its shortcomings, and proposes a slightly modified approach that can handle them. The research categorically and thoroughly (in context) identifies the top effectiveness criteria, and corresponding key performance indicators(KPIs) that can be measured to understand the level of advancement of the metadata management initiative in the company. In an effort to contrast and have a basis of comparison for the findings, the research also includes views from information managers dealing with core structured data stored in ERPs and other databases. In addition, the results include the basic criteria that can be used to evaluate metrics, in order to classify a metric as a KPI.

An Overview of the Cleantech Sector - Evaluating Environmental Indicators

The purpose of the thesis is to give an overview of the cleantech sector and to give an answer how cleantech companies can evaluate the environmental sustainability of their business by utilizing various indicators and measures. The thesis is a literature study and it is based on a secondary data. Thesis presents the definitions to cleantech as well as its history and the main industries. Cleantech market overview in Finland and worldwide is also introduced. Furthermore, various indicators are presented in order to evaluate the environmental sustainability of companies' business. In the end, indicators used in cleantech sector are evaluated. As a result, the thesis presents the following methodologies that can be used in evaluating the environmental sustainability in the cleantech sector: Sustainability assessment framework, Environmental value analysis, COMPLIMENT - Environmental performance index for industries and Environmental assessment for cleaner production. More tools are still needed to evaluate environmental sustainability in the cleantech sector.

Repair of segmental bone defects with fiber-reinforced composite: a study of material development and an animal model on rabbits

The Repair of segmental defects in load-bearing long bones is a challenging task because of the diversity of the load affecting the area; axial, bending, shearing and torsional forces all come together to test the stability/integrity of the bone. The natural biomechanical requirements for bone restorative materials include strength to withstand heavy loads, and adaptivity to conform into a biological environment without disturbing or damaging it. Fiber-reinforced composite (FRC) materials have shown promise, as metals and ceramics have been too rigid, and polymers alone are lacking in strength which is needed for restoration. The versatility of the fiber-reinforced composites also allows tailoring of the composite to meet the multitude of bone properties in the skeleton. The attachment and incorporation of a bone substitute to bone has been advanced by different surface modification methods. Most often this is achieved by the creation of surface texture, which allows bone growth, onto the substitute, creating a mechanical interlocking. Another method is to alter the chemical properties of the surface to create bonding with the bone – for example with a hydroxyapatite (HA) or a bioactive glass (BG) coating. A novel fiber-reinforced composite implant material with a porous surface was developed for bone substitution purposes in load-bearing applications. The material’s biomechanical properties were tailored with unidirectional fiber reinforcement to match the strength of cortical bone. To advance bone growth onto the material, an optimal surface porosity was created by a dissolution process, and an addition of bioactive glass to the material was explored. The effects of dissolution and orientation of the fiber reinforcement were also evaluated for bone-bonding purposes. The Biological response to the implant material was evaluated in a cell culture study to assure the safety of the materials combined. To test the material’s properties in a clinical setting, an animal model was used. A critical-size bone defect in a rabbit’s tibia was used to test the material in a load-bearing application, with short- and long-term follow-up, and a histological evaluation of the incorporation to the host bone. The biomechanical results of the study showed that the material is durable and the tailoring of the properties can be reproduced reliably. The Biological response - ex vivo - to the created surface structure favours the attachment and growth of bone cells, with the additional benefit of bioactive glass appearing on the surface. No toxic reactions to possible agents leaching from the material could be detected in the cell culture study when compared to a nontoxic control material. The mechanical interlocking was enhanced - as expected - with the porosity, whereas the reinforcing fibers protruding from the surface of the implant gave additional strength when tested in a bone-bonding model. Animal experiments verified that the material is capable of withstanding load-bearing conditions in prolonged use without breaking of the material or creating stress shielding effects to the host bone. A Histological examination verified the enhanced incorporation to host bone with an abundance of bone growth onto and over the material. This was achieved with minimal tissue reactions to a foreign body. An FRC implant with surface porosity displays potential in the field of reconstructive surgery, especially regarding large bone defects with high demands on strength and shape retention in load-bearing areas or flat bones such as facial / cranial bones. The benefits of modifying the strength of the material and adjusting the surface properties with fiber reinforcement and bone-bonding additives to meet the requirements of different bone qualities are still to be fully discovered.

Pricing anomalies in the Finnish stock market

The aim of this thesis is to examine whether the pricing anomalies exists in the Finnish stock markets by comparing the performance of quantile portfolios that are formed on the basis of either individual valuation ratios, composite value measures or combined value and momentum indicators. All the research papers included in the thesis show evidence of value anomalies in the Finnish stock markets. In the first paper, the sample of stocks over the 1991-2006 period is divided into quintile portfolios based on four individual valuation ratios (i.e., E/P, EBITDA/EV, B/P, and S/P) and three hybrids of them (i.e. composite value measures). The results show the superiority of composite value measures as selection criterion for value stocks, particularly when EBITDA/EV is employed as earnings multiple. The main focus of the second paper is on the impact of the holding period length on performance of value strategies. As an extension to the first paper, two more individual ratios (i.e. CF/P and D/P) are included in the comparative analysis. The sample of stocks over 1993- 2008 period is divided into tercile portfolios based on six individual valuation ratios and three hybrids of them. The use of either dividend yield criterion or one of three composite value measures being examined results in best value portfolio performance according to all performance metrics used. Parallel to the findings of many international studies, our results from performance comparisons indicate that for the sample data employed, the yearly reformation of portfolios is not necessarily optimal in order to maximally gain from the value premium. Instead, the value investor may extend his holding period up to 5 years without any decrease in long-term portfolio performance. The same holds also for the results of the third paper that examines the applicability of data envelopment analysis (DEA) method in discriminating the undervalued stocks from overvalued ones. The fourth paper examines the added value of combining price momentum with various value strategies. Taking account of the price momentum improves the performance of value portfolios in most cases. The performance improvement is greatest for value portfolios that are formed on the basis of the 3-composite value measure which consists of D/P, B/P and EBITDA/EV ratios. The risk-adjusted performance can be enhanced further by following 130/30 long-short strategy in which the long position of value winner stocks is leveraged by 30 percentages while simultaneously selling short glamour loser stocks by the same amount. Average return of the long-short position proved to be more than double stock market average coupled with the volatility decrease. The fifth paper offers a new approach to combine value and momentum indicators into a single portfolio-formation criterion using different variants of DEA models. The results throughout the 1994-2010 sample period shows that the top-tercile portfolios outperform both the market portfolio and the corresponding bottom-tercile portfolios. In addition, the middle-tercile portfolios also outperform the comparable bottom-tercile portfolios when DEA models are used as a basis for stock classification criteria. To my knowledge, such strong performance differences have not been reported in earlier peer-reviewed studies that have employed the comparable quantile approach of dividing stocks into portfolios. Consistently with the previous literature, the division of the full sample period into bullish and bearish periods reveals that the top-quantile DEA portfolios lose far less of their value during the bearish conditions than do the corresponding bottom portfolios. The sixth paper extends the sample period employed in the fourth paper by one year (i.e. 1993- 2009) covering also the first years of the recent financial crisis. It contributes to the fourth paper by examining the impact of the stock market conditions on the main results. Consistently with the fifth paper, value portfolios lose much less of their value during bearish conditions than do stocks on average. The inclusion of a momentum criterion somewhat adds value to an investor during bullish conditions, but this added value turns to negative during bearish conditions. During bear market periods some of the value loser portfolios perform even better than their value winner counterparts. Furthermore, the results show that the recent financial crisis has reduced the added value of using combinations of momentum and value indicators as portfolio formation criteria. However, since the stock markets have historically been bullish more often than bearish, the combination of the value and momentum criteria has paid off to the investor despite the fact that its added value during bearish periods is negative, on an average.

Development of porous glass-fiber reinforced composite for bone implants. Evaluation of antimicrobial effect and implant fixation

Cranial bone reconstructions are necessary for correcting large skull bone defects due to trauma, tumors, infections and craniotomies. Traditional synthetic implant materials include solid or mesh titanium, various plastics and ceramics. Recently, biostable glass-fiber reinforced composites (FRC), which are based on bifunctional methacrylate resin, were introduced as novel implant solution. FRCs were originally developed and clinically used in dental applications. As a result of further in vitro and in vivo testing, these composites were also approved for clinical use in cranial surgery. To date, reconstructions of large bone defects were performed in 35 patients. This thesis is dedicated to the development of a novel FRC-based implant for cranial reconstructions. The proposed multi-component implant consists of three main parts: (i) porous FRC structure; (ii) bioactive glass granules embedded between FRC layers and (iii) a silver-polysaccharide nanocomposite coating. The porosity of the FRC structure should allow bone ingrowth. Bioactive glass as an osteopromotive material is expected to stimulate the formation of new bone. The polysaccharide coating is expected to prevent bacterial colonization of the implant. The FRC implants developed in this study are based on the porous network of randomly-oriented E-glass fibers bound together by non-resorbable photopolymerizable methacrylate resin. These structures had a total porosity of 10–70 volume %, of which > 70% were open pores. The pore sizes > 100 μm were in the biologically-relevant range (50-400 μm), which is essential for vascularization and bone ingrowth. Bone ingrowth into these structures was simulated by imbedding of porous FRC specimens in gypsum. Results of push-out tests indicated the increase in the shear strength and fracture toughness of the interface with the increase in the total porosity of FRC specimens. The osteopromotive effect of bioactive glass is based on its dissolution in the physiological environment. Here, calcium and phosphate ions, released from the glass, precipitated on the glass surface and its proximity (the FRC) and formed bone-like apatite. The biomineralization of the FRC structure, due to the bioactive glass reactions, was studied in Simulated Body Fluid (SBF) in static and dynamic conditions. An antimicrobial, non-cytotoxic polysaccharide coating, containing silver nanoparticles, was obtained through strong electrostatic interactions with the surface of FRC. In in vitro conditions the lactose-modified chitosan (chitlac) coating showed no signs of degradation within seven days of exposure to lysozyme or one day to hydrogen peroxide (H2O2). The antimicrobial efficacy of the coating was tested against Staphylococcus aureus and Pseudomonas aeruginosa. The contact-active coating had an excellent short time antimicrobial effect. The coating neither affected the initial adhesion of microorganisms to the implant surface nor the biofilm formation after 24 h and 72 h of incubation. Silver ions released to the aqueous environment led to a reduction of bacterial growth in the culture medium.

Composite artistry in the Book of Numbers : a study in biblical narrative conventions

The present thesis discusses the coherence or lack of coherence in the book of Numbers, with special regard to its narrative features. The fragmented nature of Numbers is a well-known problem in research on the book, affecting how we approach and interpret it, but to date there has not been any thorough investigation of the narrative features of the work and how they might contribute to the coherence or the lack of coherence in the book. The discussion is pursued in light of narrative theory, and especially in connection to three parameters that are typically understood to be invoked in the interpretation of narratives: 1) a narrative paradigm, or ‘story,’ meaning events related to each other temporally, causally, and thematically, in a plot with a beginning, middle, and end; 2) discourse, being the expression plane of a narrative, or the devices that an author has at hand in constructing a narrative; 3) the situation or languagegame of the narrative, prototypical examples being factual reports, which seeks to depict a state of affairs, and storytelling narratives, driven by a demand for tellability. In view of these parameters the present thesis argues that it is reasonable to form four groups to describe the narrative material of Numbers: genuine narratives (e.g. Num 12), independent narrative sequences (e.g. Num 5:1-4), instrumental scenes and situations (e.g. Num 27:1-5), and narrative fragments (e.g. Num 18:1). These groups are mixed throughout with non-narrative materials. Seen together, however, the narrative features of these groups can be understood to create an attenuated narrative sequence from beginning to end in Numbers, where one thing happens after another. This sequence, termed the ‘larger story’ of Numbers, concerns the wandering of Israel from Sinai to Moab. Furthermore, the larger story has a fragmented plot. The end-point is fixed on the promised land, Israel prepares for the wandering towards it (Num 1-10), rebels against wandering and the promise and is sent back into the wilderness (Num 13-14), returns again after forty years (Num 21ff.), and prepares for conquering the land (Num 22-36). Finally, themes of the promised land, generational succession, and obedience-disobedience, operate in this larger story. Purity is also a significant theme in the book, albeit not connected to plot in the larger story. All in all, sequence, plot, and theme in the larger story of Numbers can be understood to bring some coherence to the book. However, neither aspect entirely subsumes the whole book, and the four groups of narrative materials can also be understood to underscore the incoherence of the work in differentiating its variegated narrative contents. Numbers should therefore be described as an anthology of different materials that are loosely connected through its narrative features in the larger story, with the aim of informing Israelite identity by depicting a certain period in the early history of the people.

Unidirectional fiber-reinforced composite as an oral implant abutment material: Experimental studies of E-glass fiber/BisGMA-TEGDMA polymer in vitro

Fiber-reinforced composites (FRCs) are a new group of non-metallic biomaterials showing a growing popularity in many dental and medical applications. As an oral implant material, FRC is biocompatible in bone tissue environment. Soft tissue integration to FRC polymer material is unclear. This series of in vitro studies aimed at evaluating unidirectional E-glass FRC polymer in terms of mechanical, chemical, and biological properties in an attempt to develop a new non-metallic oral implant abutment alternative. Two different types of substrates were investigated: (a) Plain polymer (BisGMA 50%–TEGDMA 50%) and (b) Unidirectional FRC. The mechanical behavior of high fiber-density FRCs was assessed using a three-point bending test. Surface characterization was performed using scanning electron and spinning disk confocal microscopes. The surface wettability/energy was determined using sessile drop method. The blood response, including blood-clotting ability and platelet morphology was evaluated. Human gingival fibroblast cell responses - adhesion kinetics, adhesion strength, and proliferation activity - were studied in cell culture environment using routine test conditions. A novel tissue culture method was developed and used to evaluate porcine gingival tissue graft attachment and growth on the experimental composite implants. The analysis of the mechanical properties showed that there is a direct proportionality in the relationship between E-glass fiber volume fraction and toughness, modulus of elasticity, and load bearing capacity; however, flexural strength did not show significant improvement when high fiber-density FRC is used. FRCs showed moderate hydrophilic properties owing to the presence of exposed glass fibers on the polymer surface. Blood-clotting time was shorter on FRC substrates than on plain polymer. The FRC substrates also showed higher platelet activation state than plain polymer substrates. Fibroblast cell adhesion strength and proliferation rate were highly pronounced on FRCs. A tissue culture study revealed that gingival epithelium and connective tissue established an immediate close contact with both plain polymer and FRC implants. However, FRC seemed to guide epithelial migration outwards from the tissue/implant interface. Due to the anisotropic and hydrophilic nature of FRC, it can be concluded that this material enhances biological events related with soft tissue integration on oral implant surface.

Use of fiber-reinforced composite framework and thermochromic pigment in maxillofacial prostheses

The purpose of this investigation was to evaluate the possibility to enhance certain qualities of facial prostheses. Polymethyl methacrylate is still being used as base mate¬rial or clip carrier material, but it is hard and heavy, and debonding of the silicone from the acrylic base material is a frequent problem. This thesis aims to evaluate the use of fiber-reinforced composite (FRC) as framework material for maxillofacial silicone prostheses. FRC has been used as reinforcement in removable and fixed partial dentures since the 1990s. This material is lightweight and can be fabricated to compress the margins of the prosthesis slightly, to keep it tightly against the skin during jaw movements and facial expressions. Additionally, the use of a thermochromic pigment, colorless in room temperature and red in a cold environment, was studied in order to evaluate the possibility of using this color changing pigment in facial prostheses to mimic the color change of facial skin in cold weather. The tensile bond strength between pre-impregnated, unidirectional FRC and maxillofacial silicone elastomer was studied. Three different bonding agents or primers were compared. Bond strength was improved by one of the primers and by roughening the surface. The effect of a skin compressing glass fiber-reinforced composite framework on facial skin blood flow was studied by using a face mask, constructed with a compression pad corresponding to the outer margin of a glass fiber-reinforced framework beam of a facial prosthesis. The skin blood flow of ten healthy volunteers, aged 23-25 years, was measured during touch, light, and moderate compression of the skin, by using laser Doppler imaging technique. None of the compressions showed any marked effects on local skin blood flow. There were no significant differences between blood flow during compression and at baseline. Maxillofacial silicone elastomer was colored intrinsically with conventional color pigments: a control group containing only conventional pigments was compared to two test groups with 0.2 wt% and 0.6 wt% thermochromic pigment added. The color of the material was measured with a spectrophotometer in room temperature and after storage in a freezer. The color stability of the maxillofacial silicone elastomer colored with thermo¬chromic pigment was evaluated by artificial aging. The color dif¬ference of the L* (lightness) and a* values (redness), comparing color after the samples were stored at room temperature and in a freezer (-19°C), was statistically significant for both 0.2 wt% and 0.6 wt% thermo¬chromic pigment groups. The differences in the b* values (yellowness) were statistically significant for the 0.6 wt% group. Exposure to ultraviolet (UV) radiation led to visually noticeable and statistically signifi¬cant color changes (ΔE) in all color values in both test groups. The specimens containing thermochromic pigment were very sensitive to UV radiation. In conclusion, a framework of fiber-reinforced composite can successfully be bonded to maxillofacial silicone elastomer, and a framework beam, compressing the facial skin, did not remarkably alter the skin blood flow on healthy, young adults. The thermochromic pigment showed color change in maxillofacial silicone elastomer. However, artificial aging showed that it was too sensitive to UV radiation to be used, as such, in maxillofacial prostheses.

Design and validation of stateful composite RESTful web services

A web service is a software system that provides a machine-processable interface to the other machines over the network using different Internet protocols. They are being increasingly used in the industry in order to automate different tasks and offer services to a wider audience. The REST architectural style aims at producing scalable and extensible web services using technologies that play well with the existing tools and infrastructure of the web. It provides a uniform set of operation that can be used to invoke a CRUD interface (create, retrieve, update and delete) of a web service. The stateless behavior of the service interface requires that every request to a resource is independent of the previous ones facilitating scalability. Automated systems, e.g., hotel reservation systems, provide advanced scenarios for stateful services that require a certain sequence of requests that must be followed in order to fulfill the service goals. Designing and developing such services for advanced scenarios with REST constraints require rigorous approaches that are capable of creating web services that can be trusted for their behavior. Systems that can be trusted for their behavior can be termed as dependable systems. This thesis presents an integrated design, analysis and validation approach that facilitates the service developer to create dependable and stateful REST web services. The main contribution of this thesis is that we provide a novel model-driven methodology to design behavioral REST web service interfaces and their compositions. The behavioral interfaces provide information on what methods can be invoked on a service and the pre- and post-conditions of these methods. The methodology uses Unified Modeling Language (UML), as the modeling language, which has a wide user base and has mature tools that are continuously evolving. We have used UML class diagram and UML state machine diagram with additional design constraints to provide resource and behavioral models, respectively, for designing REST web service interfaces. These service design models serve as a specification document and the information presented in them have manifold applications. The service design models also contain information about the time and domain requirements of the service that can help in requirement traceability which is an important part of our approach. Requirement traceability helps in capturing faults in the design models and other elements of software development environment by tracing back and forth the unfulfilled requirements of the service. The information about service actors is also included in the design models which is required for authenticating the service requests by authorized actors since not all types of users have access to all the resources. In addition, following our design approach, the service developer can ensure that the designed web service interfaces will be REST compliant. The second contribution of this thesis is consistency analysis of the behavioral REST interfaces. To overcome the inconsistency problem and design errors in our service models, we have used semantic technologies. The REST interfaces are represented in web ontology language, OWL2, that can be part of the semantic web. These interfaces are used with OWL 2 reasoners to check unsatisfiable concepts which result in implementations that fail. This work is fully automated thanks to the implemented translation tool and the existing OWL 2 reasoners. The third contribution of this thesis is the verification and validation of REST web services. We have used model checking techniques with UPPAAL model checker for this purpose. The timed automata of UML based service design models are generated with our transformation tool that are verified for their basic characteristics like deadlock freedom, liveness, reachability and safety. The implementation of a web service is tested using a black-box testing approach. Test cases are generated from the UPPAAL timed automata and using the online testing tool, UPPAAL TRON, the service implementation is validated at runtime against its specifications. Requirement traceability is also addressed in our validation approach with which we can see what service goals are met and trace back the unfulfilled service goals to detect the faults in the design models. A final contribution of the thesis is an implementation of behavioral REST interfaces and service monitors from the service design models. The partial code generation tool creates code skeletons of REST web services with method pre and post-conditions. The preconditions of methods constrain the user to invoke the stateful REST service under the right conditions and the post condition constraint the service developer to implement the right functionality. The details of the methods can be manually inserted by the developer as required. We do not target complete automation because we focus only on the interface aspects of the web service. The applicability of the approach is demonstrated with a pedagogical example of a hotel room booking service and a relatively complex worked example of holiday booking service taken from the industrial context. The former example presents a simple explanation of the approach and the later worked example shows how stateful and timed web services offering complex scenarios and involving other web services can be constructed using our approach.

Portfolio Selection via Composite Measure Analysis: Evidence from the U.S. Stock Market

The aim of this research is to examine the pricing anomalies existing in the U.S. market during 1986 to 2011. The sample of stocks is divided into decile portfolios based on seven individual valuation ratios (E/P, B/P, S/P, EBIT/EV, EVITDA/EV, D/P, and CE/P) and price momentum to investigate the efficiency of individual valuation ratio and their combinations as portfolio formation criteria. This is the first time in financial literature when CE/P is employed as a constituent of composite value measure. The combinations are based on median scaled composite value measures and TOPSIS method. During the sample period value portfolios significantly outperform both the market portfolio and comparable glamour portfolios. The results show the highest return for the value portfolio that was based on the combination of S/P & CE/P ratios. The outcome of this research will increase the understanding on the suitability of different methodologies for portfolio selection. It will help managers to take advantage of the results of different methodologies in order to gain returns above the market.