PROVISIONING OF MIDLETS

Java™ 2 Platform, Micro Edition on eräs johtava sovellusalusta, joka mahdollistaa kolmannen osapuolen sovellusten luomisen matkapuhelimiin, kommunikaattoreihin ja taskutietokoneisiin. Java-alusta keskeinen etu on sovellusten dynaaminen asentaminen. Käyttäjä ei ole rajoitettu esiasennettuihin sovelluksiin vaan voi asentaa niitä itse tarpeen mukaan. Tämän diplomityö käsittelee erilaisia Java sovellusten (MIDlettien) lataus ja asennusmenetelmiä. Diplomityö antaa yhteenvedon merkittävimmistä asennus teknologioista. Pääpaino on MIDP-standardin mukaisella langattomalle asennuksella (Over-The-Air provisioning) sillä se on kaikkein laajimmin käytetty menetelmä. Muita käsiteltäviä menetelmiä ovat WAP Push ja paikallinen asennus Bluetoothin ja Infrapunalinkin avulla. MIDletit, kuten mitkä tahansa ohjelmat, ovat alttiita laittomalle kopioinnille. Tämä diplomityö kuvaa menetelmiä, joilla laiton kopiointi voidaan estää. Yksi esimerkki on OMA™ DRM standardi. Diplomityö kuvaa myös kuinka kopiointisuojaus voidaan yhdistää olemassa oleviin asennusmenetelmiin. Java sovelluksia, MIDlettejä, käytetään yhä erilaisimpiin tarkoituksiin jolloin tarvitaan myös uusia asennusmenetelmiä. Yksi tällainen menetelmä on asentaminen erillisistä laitteista. Diplomityö kuvaa useita menetelmiä asentamiseen erillisistä laitteista. Käsitellyr menetelmät pohjautuvat Bluetooth teknologiaan ja yhtä lukuun ottamatta perustuvat standardin määrittelemiin Bluetooth profiileihin File Transfer Profile, Personal Area Networking Profile ja Object Push Profile. Toinen asennustapa on sovellusten edelleen lähettäminen toiseen puhelimeen. Diplomityö kuvaa kuinka OMA DRM standardi voidaan yhdistää tällaisen asennuksen ja ehdottaa kahta vaihtoehtoista menetelmää. Yksi perustuu Bluetoothin Object Push Profiiliin ja toinen Infrapunalinkin käyttöön. Toinen perustuu multimediaviestiin ja sähköpostiin.

Product Launch in Industrial Markets – Financial Risks in New AMD Elevator Door Launch

Tuotekehitys ja uusien tuotteiden lanseeraus on teollisen yrityksen menestyksekkään liiketoiminnan elinehtoja tämän päivän kilpailussa. Teollisuusyrityksen tuotteiden innovaatioaikakausia on ollut lukuisia, samoin kuin uuden tuotteen lanseerauksen lähtökohtia. Aikakausista, jolloin tuotteita kehitettiin yrityksen omista lähtökohdista, kuten valmistuksellisista eduista, on edetty tilanteeseen, jossa markkinoiden tarpeita tulee ottaa yhä enemmän huomioon. Kuitenkin, teollisuudessa esitellään tuotteita yhä puhtaasti tuotantolähtöisesti, ja tutkimuksen tavoitteena on selvittää taloudellisia riskejä, joita liittyy puhtaasti teknologiavetoiseen tuotteiden kehitystyöhön, valmistukseen ja lanseeraukseen. Normatiivisena tutkimuksena työ pyrkii asiakastarpeita ja teollisuusyrityksen loppuasiakkaiden näkökulmia huomioon ottaen osoittamaan markkinoinnin keinojen merkityksen tuotantolähtöisen tuotelanseerauksen taloudellisten riskien minimoimiseksi. Uuden teollisen tuotteen asiakastarpeita on selvitetty kyselymuotoisen markkinointitutkimuksen menetelmiä hyväksikäyttäen. Tuotteen tärkeimpien ominaisuuksien, kuten turvallisuuden, kestävyyden ja hinnan merkitystä voidaan hyödyntää ennen tuotteen kaupallista esittelyä potentiaalisten asiakassegmenttien kartoitukseen ja menestyksellisen lanseerauksen edesauttamiseksi.

Fiber-reinforced Composite as Oral Implant Material. Experimental studies of glass fiber and bioactive glass in vitro and in vivo

Fiber-reinforced composite as oral implant material: Experimental studies of glass fiber and bioactive glass in vitro and in vivo Department of Prosthetic Dentistry and Biomaterials Science, Institute of Dentistry, University of Turku, Turku, Finland 2008. Biocompatibility and mechanical properties are important variables that need to be determined when new materials are considered for medical implants. Special emphasis was placed on these characteristics in the present work, which aimed to investigate the potential of fiber-reinforced composite (FRC) material as an oral implant. Furthermore, the purpose of this study was to explore the effect of bioactive glass (BAG) on osseointegration of FRC implants. The biocompatibility and mechanical properties of FRC implants were studied both in vitro and in vivo. The mechanical properties of the bulk FRC implant were tested with a cantilever bending test, torsional test and push-out test. The biocompatibility was first evaluated with osteoblast cells cultured on FRC substrates. Bone bonding was determined with the mechanical push-out test and histological as well as histomorplanimetric evaluation. Implant surface was characterized with SEM and EDS analysis. The results of these studies showed that FRC implants can withstand the static load values comparably to titanium. Threaded FRC implants had significantly higher push-out strength than the threaded titanium implants. Cell culture study revealed no cytotoxic effect of FRC materials on the osteoblast-like-cells. Addition of BAG particles enhanced cell proliferation and mineralization of the FRC substrates The in vivo study showed that FRC implants can withstand static loading until failure without fracture. The results also suggest that the FRC implant is biocompatible in bone. The biological behavior of FRC was comparable to that of titanium after 4 and 12 weeks of implantation. Furthermore, addition of BAG to FRC implant increases peri-implant osteogenesis and bone maturation.

Non-resorbable glass fibre-reinforced composite with porous surface as bone substitute material: Experimental studies in vitro and in vivo focused on bone-implant interface

The development of load-bearing osseous implant with desired mechanical and surface properties in order to promote incorporation with bone and to eliminate risk of bone resorption and implant failure is a very challenging task. Bone formation and resoption processes depend on the mechanical environment. Certain stress/strain conditions are required to promote new bone growth and to prevent bone mass loss. Conventional metallic implants with high stiffness carry most of the load and the surrounding bone becomes virtually unloaded and inactive. Fibre-reinforced composites offer an interesting alternative to metallic implants, because their mechanical properties can be tailored to be equal to those of bone, by the careful selection of matrix polymer, type of fibres, fibre volume fraction, orientation and length. Successful load transfer at bone-implant interface requires proper fixation between the bone and implant. One promising method to promote fixation is to prepare implants with porous surface. Bone ingrowth into porous surface structure stabilises the system and improves clinical success of the implant. The experimental part of this work was focused on polymethyl methacrylate (PMMA) -based composites with dense load-bearing core and porous surface. Three-dimensionally randomly orientated chopped glass fibres were used to reinforce the composite. A method to fabricate those composites was developed by a solvent treatment technique and some characterisations concerning the functionality of the surface structure were made in vitro and in vivo. Scanning electron microscope observations revealed that the pore size and interconnective porous architecture of the surface layer of the fibre-reinforced composite (FRC) could be optimal for bone ingrowth. Microhardness measurements showed that the solvent treatment did not have an effect on the mechanical properties of the load-bearing core. A push-out test, using dental stone as a bone model material, revealed that short glass fibre-reinforced porous surface layer is strong enough to carry load. Unreacted monomers can cause the chemical necrosis of the tissue, but the levels of leachable resisidual monomers were considerably lower than those found in chemically cured fibre-reinforced dentures and in modified acrylic bone cements. Animal experiments proved that surface porous FRC implant can enhance fixation between bone and FRC. New bone ingrowth into the pores was detected and strong interlocking between bone and the implant was achieved.

Kokoonpanon ohjauksen kehittäminen maa- ja metsätalouskoneteollisuudessa

Kehitetään maa- ja metsätalouskoneita valmistavan yrityksen kokoonpanoohjausta imu- ja työntöohjausmenetelmin. Luodaan sopiva järjestelmä toimintaympäristöön.

Distortion properties of quasiconformal maps

In this Licentiate thesis we investigate the absolute ratio δ, j, ˜j and hyperbolic ρ metrics and their relations with each other. Various growth estimates are given for quasiconformal mpas both in plane and space. Some Hölder constants were refined with respect δ, j ˜j metrics. Some new results regarding the Hölder continuity of quasiconformal and quasiregular mapping of unit ball with respect to Euclidean and hyperbolic metrics are given, which were obtained by many authors in 1980’s. Applications are given to the study of metric space, quasiconformal and quasiregular maps in the plane and as well as in the space.

Notes on Emerging Technologies

This dissertation considers the impact of technology foresight in innovation within the context of a technology driven development. The main hypothesis made was that by using different methods of foresight in the industry level significant value could be created. The question was approached through a case study in portable fuel cell technology. The theoretical background of the study draws from Innovation, Product Development, Management of Technology, and Technology Foresight. The connection within the topics is made by analyzing foresight, not in a policy view as often done in Europe, but in a micro-level. Focusing mostly on how a technology driven development scenario could be analyzed. The study is based on a bibliometric, extrapolation and patent analysis within the context of a case study. In addition, a large two-year Delphi study was conducted. The study was finalized with a scenario work on the future possibilities of the case study technology. Original publications also consider several methodological issues. In the context of the case study, the study questions the practicality of establishing a portable fuel cell technology in Finland showing several impractical assumptions has been made. In a more conceptual level, the study makes notions on two underlying factors: policy-push technologies and growth of data. Policy-push questions in which level a policy effort towards a single technology is practical. The European foresight effort is more directed towards policy decisions in contrast to US foresight, which is to some extent corporate driven. Although the policy-based foresight has produced significant results in the European context, policy led efforts towards a single technology are challenging. Growth of data argues on the challenges produced by the large-scale application of quantitative measures of foresight. Bibliometric studies and trend extrapolations have been taken advantage of the increasing number of databases made available, and used these as the basis for forecasts. However, the relationship with actual development and quantitative evidence is still unproven.

A multibody dynamic model of the cross-country ski-skating technique

The objective of this thesis is the development of a multibody dynamic model matching the observed movements of the lower limb of a skier performing the skating technique in cross-country style. During the construction of this model, the formulation of the equation of motion was made using the Euler - Lagrange approach with multipliers applied to a multibody system in three dimensions. The description of the lower limb of the skate skier and the ski was completed by employing three bodies, one representing the ski, and two representing the natural movements of the leg of the skier. The resultant system has 13 joint constraints due to the interconnection of the bodies, and four prescribed kinematic constraints to account for the movements of the leg, leaving the amount of degrees of freedom equal to one. The push-off force exerted by the skate skier was taken directly from measurements made on-site in the ski tunnel at the Vuokatti facilities (Finland) and was input into the model as a continuous function. Then, the resultant velocities and movement of the ski, center of mass of the skier, and variation of the skating angle were studied to understand the response of the model to the variation of important parameters of the skate technique. This allowed a comparison of the model results with the real movement of the skier. Further developments can be made to this model to better approximate the results to the real movement of the leg. One can achieve this by changing the constraints to include the behavior of the real leg joints and muscle actuation. As mentioned in the introduction of this thesis, a multibody dynamic model can be used to provide relevant information to ski designers and to obtain optimized results of the given variables, which athletes can use to improve their performance.

Modeling and Control of the Power Conversion Unit in a Solid Oxide Fuel Cell Environment

In this doctoral thesis, a power conversion unit for a 10 kWsolid oxide fuel cell is modeled, and a suitable control system is designed. The need for research was identified based on an observation that there was no information available about the characteristics of the solid oxide fuel cell from the perspective of power electronics and the control system, and suitable control methods had not previously been studied in the literature. In addition, because of the digital implementation of the control system, the inherent characteristics of the digital system had to be taken into account in the characteristics of the solid oxide fuel cell (SOFC). The characteristics of the solid oxide fuel cell as well the methods for the modeling and control of the DC/DC converter and the grid converter are studied by a literature survey. Based on the survey, the characteristics of the SOFC as an electrical power source are identified, and a solution to the interfacing of the SOFC in distributed generation is proposed. A mathematical model of the power conversion unit is provided, and the control design for the DC/DC converter and the grid converter is made based on the proposed interfacing solution. The limit cycling phenomenon is identified as a source of low-frequency current ripple, which is found to be insignificant when connected to a grid-tied converter. A method to mitigate a second harmonic originating from the grid interface is proposed, and practical considerations of the operation with the solid oxide fuel cell plant are presented. At the theoretical level, the thesis discusses and summarizes the methods to successfully derive a model for a DC/DC converter, a grid converter, and a power conversion unit. The results of this doctoral thesis can also be used in other applications, and the models and methods can be adopted to similar applications such as photovoltaic systems. When comparing the results with the objectives of the doctoral thesis, we may conclude that the objectives set for the work are met. In this doctoral thesis, theoretical and practical guidelines are presented for the successful control design to connect a SOFC-based distributed generation plant to the utility grid.

The Role of Universities in the Triple Helix model of innovation management within the biotechnology industry, Case example: Turku Science Park Network

Biotechnology has been recognized as the key strategic technology for industrial growth. The industry is heavily dependent on basic research. Finland continues to rank in the top 10 of Europe's most innovative countries in terms of tax-policy, education system, infrastructure and the number of patents issued. Regardless of the excellent statistical results, the output of this innovativeness is below acceptable. Research on the issues hindering the output creation has already been done and the identifiable weaknesses in the Finland's National Innovation system are the non-existent growth of entrepreneurship and the missing internationalization. Finland is proven to have all the enablers of the innovation policy tools, but is lacking the incentives and rewards to push the enablers, such as knowledge and human capital, forward. Science Parks are the biggest operator in research institutes in the Finnish Science and Technology system. They exist with the purpose of speeding up the commercialization process of biotechnology innovations which usually include technological uncertainty, technical inexperience, business inexperience and high technology cost. Innovation management only internally is a rather historic approach, current trend drives towards open innovation model with strong triple helix linkages. The evident problems in the innovation management within the biotechnology industry are examined through a case study approach including analysis of the semi-structured interviews which included biotechnology and business expertise from Turku School of Economics. The results from the interviews supported the theoretical implications as well as conclusions derived from the pilot survey, which focused on the companies inside Turku Science Park network. One major issue that the Finland's National innovation system is struggling with is the fact that it is technology driven, not business pulled. Another problem is the university evaluation scale which focuses more on number of graduates and short-term factors, when it should put more emphasis on the cooperation success in the long-term, such as the triple helix connections with interaction and knowledge distribution. The results of this thesis indicated that there is indeed requirement for some structural changes in the Finland's National innovation system and innovation policy in order to generate successful biotechnology companies and innovation output. There is lack of joint output and scales of success, lack of people with experience, lack of language skills, lack of business knowledge and lack of growth companies.

Hajautettuun ryhmitykseen soveltuva tilannekuvajärjestelmä : näkökulmana viestihuoltokomppania

Tutkimuksen tarkoituksena on selvittää laajalla maantieteellisellä alueella hajautetusti toi-mivan joukon tilannekuvan muodostumista viestihuoltokomppaniaan näkökulmasta. Tut-kimuksen pääkysymys on: Mikä tilannekuvajärjestelmistä on soveltuvin viestihuoltokomp-panian käyttöön? Arvioinnissa otetaan huomioon vaihtoehtoisten tiedonsiirtotapojen käytön vaatimus sotilaallisessa toimintaympäristössä. Tutkimuksessa vaatimusmäärittely on koko-naisuus, jolla saadaan tuloksia monisyisen prosessin kautta. Yleiskuvauksen laatiminen toteutetaan kirjallisuustutkimuksella. Vaatimusten ja havaintojen kerääminen toteutetaan lomakekyselynä. Jäsentelyyn, muokkaukseen ja vertailuun käytetään laadullista tarkastelua, kirjallisuusselvitystä ja vertailua. Tietotekniikan käyttämisen tulisi vapauttaa resursseja tietomassojen rutiininomaisesta käsit-telystä ymmärryksen luomiseen ja päätöksen tekoon. Tiedon lähettäminen laitteelta toiselle edellyttää niiden yhdistämistä toisiinsa. Verkkojen topologioista käsitellään keskeiset (väy-lä, rengas ja tähti). Verkkoratkaisuista käsitellään kolme yleisintä (asiakas-palvelin-, push- ja vertais-verkko). Siirtotiet jaetaan kahteen ryhmään. Johdollisten siirtoteiden toteutuksesta käsitellään kolme päätyyppiä (koaksiaalikaapeli, parikaapeli ja optiset kuidut). Langattomi-en siirtoteiden toteutuksesta käsitellään neljä päätyyppiä (kaupalliset matkaviestimet, TET-RA-tekniikka, kenttäradiot ja radiolinkit). VHK:n vaatimusmäärittelyssä esiin nousi kolme kokonaisuutta. Hajautus arvioi järjestel-män käyttöä ja sen ulottuvuutta. Turvallisuus arvioi järjestelmän toimivuuden ja teknisten ratkaisujen turvallisuutta. Käyttö arvioi järjestelmän käyttämisen helppouteen ja teknisten ratkaisujen saatavuuteen liittyviä seikkoja. Vaatimusmäärittelyn kautta varsinaiseen vertai-luun valittiin neljä järjestelmää. CORE-järjestelmän kehittäminen ja kuvaus ovat hyvät. Irisweb on jo lähtökohtaisesti suun-niteltu toimintaympäristöltään vastaamaan niihin tarpeisiin, joita VHK:lla on, joten toimin-not vastaavat tarpeita hyvin. MATI sisältää käytössä testatun, kestävän ja nopeasti käyt-töönotettavan kokonaisuuden. Eri järjestelmien tekniset ratkaisut pohjautuvat paljon samoi-hin tekniikoihin, osalla on sama tiedonsiirtoalusta. Järjestelmien soveltuvuus eri osa-alueisiin vaihteli. Tutkimuksen tuloksena soveltuvin järjestelmä on MATI. Tulevaisuudessa eriytyvien järjestelmien sulauttaminen ja niiden parhaiden ominaisuuksien yhdistäminen näyttäisi olevan ainoa suunta. COTS-tekniikan käyttäminen ja SOA suunnit-telun pohjana ohjaavat kehitystä kohti verkostokeskeisyyttä.

Development of porous glass-fiber reinforced composite for bone implants. Evaluation of antimicrobial effect and implant fixation

Cranial bone reconstructions are necessary for correcting large skull bone defects due to trauma, tumors, infections and craniotomies. Traditional synthetic implant materials include solid or mesh titanium, various plastics and ceramics. Recently, biostable glass-fiber reinforced composites (FRC), which are based on bifunctional methacrylate resin, were introduced as novel implant solution. FRCs were originally developed and clinically used in dental applications. As a result of further in vitro and in vivo testing, these composites were also approved for clinical use in cranial surgery. To date, reconstructions of large bone defects were performed in 35 patients. This thesis is dedicated to the development of a novel FRC-based implant for cranial reconstructions. The proposed multi-component implant consists of three main parts: (i) porous FRC structure; (ii) bioactive glass granules embedded between FRC layers and (iii) a silver-polysaccharide nanocomposite coating. The porosity of the FRC structure should allow bone ingrowth. Bioactive glass as an osteopromotive material is expected to stimulate the formation of new bone. The polysaccharide coating is expected to prevent bacterial colonization of the implant. The FRC implants developed in this study are based on the porous network of randomly-oriented E-glass fibers bound together by non-resorbable photopolymerizable methacrylate resin. These structures had a total porosity of 10–70 volume %, of which > 70% were open pores. The pore sizes > 100 μm were in the biologically-relevant range (50-400 μm), which is essential for vascularization and bone ingrowth. Bone ingrowth into these structures was simulated by imbedding of porous FRC specimens in gypsum. Results of push-out tests indicated the increase in the shear strength and fracture toughness of the interface with the increase in the total porosity of FRC specimens. The osteopromotive effect of bioactive glass is based on its dissolution in the physiological environment. Here, calcium and phosphate ions, released from the glass, precipitated on the glass surface and its proximity (the FRC) and formed bone-like apatite. The biomineralization of the FRC structure, due to the bioactive glass reactions, was studied in Simulated Body Fluid (SBF) in static and dynamic conditions. An antimicrobial, non-cytotoxic polysaccharide coating, containing silver nanoparticles, was obtained through strong electrostatic interactions with the surface of FRC. In in vitro conditions the lactose-modified chitosan (chitlac) coating showed no signs of degradation within seven days of exposure to lysozyme or one day to hydrogen peroxide (H2O2). The antimicrobial efficacy of the coating was tested against Staphylococcus aureus and Pseudomonas aeruginosa. The contact-active coating had an excellent short time antimicrobial effect. The coating neither affected the initial adhesion of microorganisms to the implant surface nor the biofilm formation after 24 h and 72 h of incubation. Silver ions released to the aqueous environment led to a reduction of bacterial growth in the culture medium.

Open Environmental Information Upon Disclosure Request in China: The Paradox of Legal Mobilization

Taking a realist view that law is one form of politics, this dissertation studies the roles of citizens and organizations in mobilizing the law to request government agencies to disclose environmental information in China, and during this process, how the socio-legal field interacts with the political-legal sphere, and what changes have been brought about during their interactions. This work takes a socio-legal approach and applies methodologies of social science and legal analysis. It aims to understand the paradox of why and how citizens and entities have been invoking the law to access environmental information despite the fact that various obstacles exist and the effectiveness of the new mechanism of environmental information disclosure still remains low. The study is largely based on the 28 cases and eight surveys of environmental information disclosure requests collected by the author. The cases and surveys analysed in this dissertation all occurred between May 2008, when the OGI Regulations and the OEI Measures came into effect, and August 2012 when the case collection was completed. The findings of this study have shown that by invoking the rules of law made by the authorities to demand government agencies disclosing environmental information, the public, including citizens, organizations, law firms, and the media, have strategically created a repercussive pressure upon the authorities to act according to the law. While it is a top-down process that has established the mechanism of open government information in China, it is indeed the bottom-up activism of the public that makes it work. Citizens and organizations’ use of legal tactics to push government agencies to disclose environmental information have formed not only an end of accessing the information but more a means of making government agencies accountable to their legal obligations. Law has thus played a pivotal role in enabling citizen participation in the political process. Against the current situation in China that political campaigns, or politicization, from general election to collective actions, especially contentious actions, are still restrained or even repressed by the government, legal mobilization, or judicialization, that citizens and organizations use legal tactics to demand their rights and push government agencies to enforce the law, become de facto an alternative of political participation. During this process, legal actions have helped to strengthen the civil society, make government agencies act according to law, push back the political boundaries, and induce changes in the relationship between the state and the public. In the field of environmental information disclosure, citizens and organizations have formed a bottom-up social activism, though limited in scope, using the language of law, creating progressive social, legal and political changes. This study emphasizes that it is partial and incomplete to understand China’s transition only from the top-down policy-making and government administration; it is also important to observe it from the bottom-up perspective that in a realistic view law can be part of politics and legal mobilization, even when utterly apolitical, can help to achieve political aims as well. This study of legal mobilization in the field of environmental information disclosure also helps us to better understand the function of law: law is not only a tool for the authorities to regulate and control, but inevitably also a weapon for the public to demand government agencies to work towards their obligations stipulated by the laws issued by themselves.

Ilmoitusmenettely rahanpesun torjumiseksi

Rahanpesu on rikollisesta toiminnasta hankitun varallisuuden siirtoa lailliseen talousjärjestelmään. Rahanpesu on liitännäinen teko ja se edellyttää aina esirikosta. Esirikos voi olla mikä tahansa rikos, josta varallisuutta hankitaan - huumausainerikos tai talousrikos. Tutkielmassa on selvitetty lainopillista menetelmää käyttäen Suomen rahanpesulain ja ilmoitusmenettelyn tavoitteita ja sisältöä, sekä kansainvälisen rahanpesusäännöstön vaikutuksia Suomen säännöstöön. Empiiristä aineistoa kerättiin teemahaastattelujen avulla ja sen avulla selvitettiin, miten Suomen ilmoitusvelvolliset noudattavat laissa ja ilmoitusmenettelyssä asetettuja velvollisuuksia käytännössä. Tutkimustulosten mukaan, ilmoitusvelvollisiin kohdistetaan suora normatiivinen ohjaus. Ilmoitusvelvolliset noudattavat, hyväksyvät sääntelyn ja uskovat siihen. Tämä auttaa Suomen viranomaisia rahanpesutorjuntatyössä. Suomen rahanpesusäännöstöä on kehitetty vuosien aikana vastamaan kansainvälisiä vaatimuksia. Sääntelyssä on vielä puutteita. On olemassa myös muita ulkopuolisia tekijöitä, jotka hankaloittavat rahanpesun tehokasta torjuntaa.