76 resultados para Maturity level
Resumo:
The Electronic Government (e-Government) means delivering the services and information to the citizens and businesses through the use of Information and Communication Technology (ICT) in order to enable them to interact more effectively with the government, and to increase the quality of the services. As many other governments in the developed and developing countries, the Kurdistan Regional Government (KRG) has embarked on the e-Government initiatives. This study revealed that there are various challenges which affect the e-Government in the Kurdistan Region of Iraq (KRI), but also a lot of e-Government progress has happened. In addition, based on the United Nations’ e-Government maturity level benchmarking, the e-Government in the KRI is at the interactive stage. In this study the services that the citizens want from the government in order to implement an appropriate e-Government were also identified.
Resumo:
Configuration management is often seen as an enabler for the main IT Service Management (ITSM) processes such as Incident and Problem management. A decent level of quality of IT configuration data is required in order to carry out routines of these processes. This case study examines the state of configuration management in a multinational organization and aims at identification of methods for its improvement. The author has stayed five months with this company in order to collect different sources of evidence and to make observations. The main source of data for this study is interviews with some of the key employees of the assigned organization who are involved into the ITSM processes. This study concludes the maturity level of the existing configuration management process to be repeatable but intuitive, and outlines the principal requirements for its improvement. A match between the requirements identified in the organization and the requirements stated in the ISO/IEC 20000 standard indicates the possibility of adopting ITIL guidelines as a method for configuration management process improvement. The outcome of the study presents a set of recommendations for improvement that considers the process, the information model and the information system for configuration management in the case organization.
Resumo:
Tämä diplomityö on tehty suorituskyky johtamisen pääaineeseen ja sen tavoitteena on ollut suunnitella ja toteuttaa pieniin ja keskisuuriin yrityksiin soveltuva innovaatiokyvykkyyden maturiteetti- eli kypsyysmalli. Tutkimuksessa käytetään kvalitatiivista eli laadullista lähestymistapaa ja sovelletaan konstruktiivista tutkimusotetta. Tutkimuksen peruskäsitteet ovat innovaatio, innovatiivisuus ja innovaatiokyvykkyys. Innovaatio-käsite voidaan ymmärtää eräänlaiseksi synonyymiksi uutuudelle. Kattavin määritelmä innovaatiolle on ymmärtää se yksittäisen tapahtuman sijasta prosessina. Suorituskyvyn johtamisen näkökulmasta innovatiivisuutta voidaan pitää yhtenä yrityksen sisäisen suorituskyvyn kulmakivenä. Innovaatiokyky on osa yrityksen aineetonta pääomaa sekä organisaation suorituskyvyn ja menestymisen osa-alue ja taustatekijä. Yrityksen koko vaikuttaa sen innovaatiotoimintaan sekä määrällisesti käytettävien resurssien ja tehtävien investointien suuruutena että laadullisesti innovaatiotoiminnan organisoinnissa ja toteutuksessa. Innovaatiokyvykkyyden maturiteettimallin perusajatus on nähdä innovaatiokyvykkyys eteenpäin liikkuvana prosessina, jossa yritys tai organisaatio parantaa omaa asemaansa suhteessa ennalta määrättyihin innovaatiokyvykkyyden tekijöihin. Tutkimuksessa konstruoitu pk-yritysten innovaatiokyvykkyyden maturiteettimalli muodostuu kokonaisuudesta, jossa on kolme tekijää: mittaristo, maturiteettikuvio ja tasoportaat sekä nämä toisiinsa kytkevä innovaatiokyvykkyyden viitekehys. Mallin toimivuutta testattiin heikolla markkinatestillä suomalaisessa tietotekniikka-alan palveluyrityksen tuotekehitysorganisaatiossa. Tuloksien perusteella määritettiin case-organisaation maturiteettitaso. Lisäksi organisaatiosta löydettiin niin kehittämiskohteita kuin vahvuuksiakin.
Resumo:
Digitalisoituminen on lisännyt datan ja tiedon määrää huomattavasti viime vuosien aikana. Organisaatioiden on pystyttävä muuttamaan tämä tieto toiminnaksi. Tässä tutkimuksessa tutkittiin, miten tätä tietoa voidaan käyttää hyväksi päätöksenteossa. Tutkimuksen tarkoitus oli myös selvittää tapausorganisaation osalta sen liiketoimintatiedon hallinnan nykytilanne ja kypsyysaste, jotta sille voidaan asettaa tavoitetila ja luoda kehityssuunnitelma. Tutkimus toteutettiin kvalitatiivisena tapaustutkimuksena. Empiirisen tutkimuksen kohteena oli globaali teollisuuden alan organisaation Suomessa sijaitseva yksikkö. Tutkimuksen empiirinen aineisto kerättiin puolistrukturoiduilla haastatteluilla, joita tehtiin tapausorganisaation edustajille. Tutkimus osoitti, että uusien tietolähteiden syntyminen on tuonut haasteita tiedonhallinnan osalta. Liiketoimintatiedon hallintaa tulee tarkastella kokonaisuudessaan sekä liiketoiminnan että teknologian näkökulmasta. Organisaation on hyvä tietää oma asemoitumisensa, jotta se pystyy kehittämään
Resumo:
The bedrock of old crystalline cratons is characteristically saturated with brittle structures formed during successive superimposed episodes of deformation and under varying stress regimes. As a result, the crust effectively deforms through the reactivation of pre-existing structures rather than by through the activation, or generation, of new ones, and is said to be in a state of 'structural maturity'. By combining data from Olkiluoto Island, southwestern Finland, which has been investigated as the potential site of a deep geological repository for high-level nuclear waste, with observations from southern Sweden, it can be concluded that the southern part of the Svecofennian shield had already attained structural maturity during the Mesoproterozoic era. This indicates that the phase of activation of the crust, i.e. the time interval during which new fractures were generated, was brief in comparison to the subsequent reactivation phase. Structural maturity of the bedrock was also attained relatively rapidly in Namaqualand, western South Africa, after the formation of first brittle structures during Neoproterozoic time. Subsequent brittle deformation in Namaqualand was controlled by the reactivation of pre-existing strike-slip faults.In such settings, seismic events are likely to occur through reactivation of pre-existing zones that are favourably oriented with respect to prevailing stresses. In Namaqualand, this is shown for present day seismicity by slip tendency analysis, and at Olkiluoto, for a Neoproterozoic earthquake reactivating a Mesoproterozoic fault. By combining detailed field observations with the results of paleostress inversions and relative and absolute time constraints, seven distinctm superimposed paleostress regimes have been recognized in the Olkiluoto region. From oldest to youngest these are: (1) NW-SE to NNW-SSE transpression, which prevailed soon after 1.75 Ga, when the crust had sufficiently cooled down to allow brittle deformation to occur. During this phase conjugate NNW-SSE and NE-SW striking strike-slip faults were active simultaneous with reactivation of SE-dipping low-angle shear zones and foliation planes. This was followed by (2) N-S to NE-SW transpression, which caused partial reactivation of structures formed in the first event; (3) NW-SE extension during the Gothian orogeny and at the time of rapakivi magmatism and intrusion of diabase dikes; (4) NE-SW transtension that occurred between 1.60 and 1.30 Ga and which also formed the NW-SE-trending Satakunta graben located some 20 km north of Olkiluoto. Greisen-type veins also formed during this phase. (5) NE-SW compression that postdates both the formation of the 1.56 Ga rapakivi granites and 1.27 Ga olivine diabases of the region; (6) E-W transpression during the early stages of the Mesoproterozoic Sveconorwegian orogeny and which also predated (7) almost coaxial E-W extension attributed to the collapse of the Sveconorwegian orogeny. The kinematic analysis of fracture systems in crystalline bedrock also provides a robust framework for evaluating fluid-rock interaction in the brittle regime; this is essential in assessment of bedrock integrity for numerous geo-engineering applications, including groundwater management, transient or permanent CO2 storage and site investigations for permanent waste disposal. Investigations at Olkiluoto revealed that fluid flow along fractures is coupled with low normal tractions due to in-situ stresses and thus deviates from the generally accepted critically stressed fracture concept, where fluid flow is concentrated on fractures on the verge of failure. The difference is linked to the shallow conditions of Olkiluoto - due to the low differential stresses inherent at shallow depths, fracture activation and fluid flow is controlled by dilation due to low normal tractions. At deeper settings, however, fluid flow is controlled by fracture criticality caused by large differential stress, which drives shear deformation instead of dilation.
Resumo:
Tiivistelmä: Vedenpinnan alenemisen vaikutus sararämeen pintakasvillisuuden biomassaan ja lajistoon
Resumo:
Selostus: Syys- ja talviruokinnan vaikutus yksin ja pareittain kasvatettujen minkkien lisääntymistulokseen
Resumo:
Sadannan vaikutus vedenpinnan tasoon kohosuolla
Resumo:
Selostus: Lannoituksen ja kastelun vaikutus sipulin satoon, sadon valmistumiseen ja varastokestävyyteen