16 resultados para grid codes
em Université de Lausanne, Switzerland
Resumo:
Ce travail décrit les opérations théoriques et pratiques concernant le transcodage des opérations d'une part, des diagnostics d'autre part; il décrit également le programme informatique de transcodage.
Resumo:
In population surveys of the exposure to medical X-rays both the frequency of examinations and the effective dose per examination are required. The use of the Swiss medical tariffication system (TARMED) for establishing the frequency of X-ray medical examinations was explored. The method was tested for radiography examinations performed in 2008 at the Lausanne University Hospital. The annual numbers of radiographies determined from the "TARMED" database are in good agreement with the figures extracted from the local RIS (Radiology Information System). The "TARMED" is a reliable and fast method for establishing the frequency of radiography examination, if we respect the context in which the "TARMED" code is used. In addition, this billing context provides most valuable information on the average number of radiographs per examination as well as the age and sex distributions. Radiographies represent the major part of X-ray examinations and are performed by about 4,000 practices and hospitals in Switzerland. Therefore this method has the potential to drastically simplify the organisation of nationwide surveys. There are still some difficulties to overcome if the method is to be used to assess the frequency of computed tomography or fluoroscopy examinations; procedures that deliver most of the radiation dose to the population. This is due to the poor specificity of "TARMED" codes concerning these modalities. However, the use of CT and fluoroscopy installations is easier to monitor using conventional survey methods since there are fewer centres. Ways to overcome the "TARMED" limitations for these two modalities are still being explored.
Resumo:
Objectives: We are interested in the numerical simulation of the anastomotic region comprised between outflow canula of LVAD and the aorta. Segmenta¬tion, geometry reconstruction and grid generation from patient-specific data remain an issue because of the variable quality of DICOM images, in particular CT-scan (e.g. metallic noise of the device, non-aortic contrast phase). We pro¬pose a general framework to overcome this problem and create suitable grids for numerical simulations.Methods: Preliminary treatment of images is performed by reducing the level window and enhancing the contrast of the greyscale image using contrast-limited adaptive histogram equalization. A gradient anisotropic diffusion filter is applied to reduce the noise. Then, watershed segmentation algorithms and mathematical morphology filters allow reconstructing the patient geometry. This is done using the InsightToolKit library (www.itk.org). Finally the Vascular Model¬ing ToolKit (www.vmtk.org) and gmsh (www.geuz.org/gmsh) are used to create the meshes for the fluid (blood) and structure (arterial wall, outflow canula) and to a priori identify the boundary layers. The method is tested on five different patients with left ventricular assistance and who underwent a CT-scan exam.Results: This method produced good results in four patients. The anastomosis area is recovered and the generated grids are suitable for numerical simulations. In one patient the method failed to produce a good segmentation because of the small dimension of the aortic arch with respect to the image resolution.Conclusions: The described framework allows the use of data that could not be otherwise segmented by standard automatic segmentation tools. In particular the computational grids that have been generated are suitable for simulations that take into account fluid-structure interactions. Finally the presented method features a good reproducibility and fast application.
Resumo:
One of the important questions in biological evolution is to know if certain changes along protein coding genes have contributed to the adaptation of species. This problem is known to be biologically complex and computationally very expensive. It, therefore, requires efficient Grid or cluster solutions to overcome the computational challenge. We have developed a Grid-enabled tool (gcodeml) that relies on the PAML (codeml) package to help analyse large phylogenetic datasets on both Grids and computational clusters. Although we report on results for gcodeml, our approach is applicable and customisable to related problems in biology or other scientific domains.
Resumo:
Skeletal muscle mitochondrial (Mito) and lipid droplet (Lipid) content are often measured in human translational studies. Stereological point counting allows computing Mito and Lipid volume density (Vd) from micrographs taken with transmission electron microscopes. Former studies are not specific as to the size of individual squares that make up the grids, making reproducibility difficult, particularly when different magnifications are used. Our objective was to determine which size grid would be best at predicting fractional volume efficiently without sacrificing reliability and to test a novel method to reduce sampling bias. Methods: ten subjects underwent vastus lateralis biopsies. Samples were fixed, embedded, and cut longitudinally in ultrathin sections of 60 nm. Twenty micrographs from the intramyofibrillar region were taken per subject at Ã-33,000 magnification. Different grid sizes were superimposed on each micrograph: 1,000 Ã- 1,000 nm, 500 Ã- 500 nm, and 250 Ã- 250 nm. Results: mean Mito and Lipid Vd were not statistically different across grids. Variability was greater when going from 1,000 Ã- 1,000 to 500 Ã- 500 nm grid than from 500 Ã- 500 to 250 Ã- 250 nm grid. Discussion: this study is the first to attempt to standardize grid size while keeping with the conventional stereology principles. This is all in hopes of producing replicable assessments that can be obtained universally across different studies looking at human skeletal muscle mitochondrial and lipid droplet content.
Resumo:
Constituant l'un des premiers « genres » de l'histoire du cinéma (dont Burch et Gaudreault ont montré le rôle fondateur dans la standardisation des procédures de montage institutionnalisées), les films mettant en scène la Vie et la Passion du Christ fixent leurs normes en s'appropriant des codes iconographiques préétablis. Dans cet article, Valentine Robert s'attache à déployer le « palimpseste » de ces Passions des premiers temps, à démêler les « séries culturelles » impliquées, à dégager les phénomènes de reprises d'une bande à l'autre, et à replacer certains de ces jeux référentiels dans leur visée de légitimation - ou doit-on dire « canonisation » ? - du médium cinématographique.
Resumo:
Cette thèse rassemble une série de méta-analyses, c'est-à-dire d'analyses ayant pour objet des analyses produites par des sociologues (notamment celles résultant de l'application de méthodes de traitement des entretiens). Il s'agit d'une démarche réflexive visant les pratiques concrètes des sociologues. Celles-ci sont envisagées comme des activités gouvernées par des règles. Une part importante de cette thèse sera donc consacrée au développement d'un outil d'analyse « pragmatologique » (E. Durkheim), c'est-à-dire permettant l'étude des pratiques et des règles en rapport avec elles. Pour aborder les règles, la philosophie analytique d'inspiration wittgensteinienne apporte plusieurs propositions importantes. Les règles sont ainsi considérées comme des concepts d'air de famille : il n'y a pas de définitions communes recouvrant l'ensemble des règles. Pour étudier les règles, il convient alors de faire des distinctions à partir de leurs usages. Une de ces distinctions concerne la différence entre règles constitutives et règles régulatives : une règle constitutive crée une pratique (e.g. le mariage), alors qu'une règle régulative s'applique à des activités qui peuvent exister sans elle (e.g. les règles du savoir-vivre). L'activité méthodologique des sociologues repose et est contrainte par ces types de règles, qui sont pour l'essentiel implicites. Cette thèse vise donc à rendre compte, par la description et la codification des règles, du caractère normatif des méthodes dans les pratiques d'analyse de la sociologie. Elle insiste en particulier sur les limites logiques qu'instituent les règles constitutives, celles-ci rendant impossibles (et non pas interdites) certaines actions des sociologues. This thesis brings together a series of meta-analyzes, that is, analyzes that tackle analyzes produced by sociologists (notably those resulting from the application of methods in treating interviews). The approach is reflexive and aimed at the concrete practices of sociologists, considered as activities governed by rules. An important part of this thesis is therefore devoted to the development of a "pragmatological" analytical tool (Durkheim) to conduct a study of such practices and of the rules that govern them. To approach these rules, Wittgenstein-inspired analytic philosophy offers several important proposals. The rules are, at first, seen as concepts of family resemblance, assuming that there is no common definition accounting for all rules. In order to conduct the study of such rules, it is therefore necessary to discern how they are respectively used. One of these distinctions concerns the difference between constitutive rules and regulative rules: a constitutive rule creates a practice (for example marriage), while a regulative rule applies to activities that can exist outside of the rule (for example, the rules of etiquette). The methodological activity of sociologists relies on, and is constrained by these types of rules, which are essentially implicit. Through the description and codification of rules, this thesis aims to account for the normative character of methods governing analytical practices in sociology. Particular emphasis is on the logical limits established by constitutive rules, limits that render several of the sociologist's actions impossible (rather than forbidden).