Non-covalent and covalent protein labeling in two-dimensional gel electrophoresis.

Over the past decades, several sensitive post-electrophoretic stains have been developed for an identification of proteins in general, or for a specific detection of post-translational modifications such as phosphorylation, glycosylation or oxidation. Yet, for a visualization and quantification of protein differences, the differential two-dimensional gel electrophoresis, termed DIGE, has become the method of choice for a detection of differences in two sets of proteomes. The goal of this review is to evaluate the use of the most common non-covalent and covalent staining techniques in 2D electrophoresis gels, in order to obtain maximal information per electrophoresis gel and for an identification of potential biomarkers. We will also discuss the use of detergents during covalent labeling, the identification of oxidative modifications and review influence of detergents on finger prints analysis and MS/MS identification in relation to 2D electrophoresis.

Sample preparation for two-dimensional gel electrophoresis.

The choice of sample preparation protocol is a critical influential factor for isoelectric focusing which in turn affects the two-dimensional gel result in terms of quality and protein species distribution. The optimal protocol varies depending on the nature of the sample for analysis and the properties of the constituent protein species (hydrophobicity, tendency to form aggregates, copy number) intended for resolution. This review explains the standard sample buffer constituents and illustrates a series of protocols for processing diverse samples for two-dimensional gel electrophoresis, including hydrophobic membrane proteins. Current methods for concentrating lower abundance proteins, by removal of high abundance proteins, are also outlined. Finally, since protein staining is becoming increasingly incorporated into the sample preparation procedure, we describe the principles and applications of current (and future) pre-electrophoretic labelling methods.

Establishing two-dimensional gels for the analysis of Leishmania proteomes.

Several different sample preparation methods for two-dimensional electrophoresis (2-DE) analysis of Leishmania parasites were compared. From this work, we were able to identify a solubilization method using Nonidet P-40 as detergent, which was simple to follow, and which produced 2-DE gels of high resolution and reproducibility.

Mapping the proteome of Leishmania Viannia parasites using two-dimensional polyacrylamide gel electrophoresis and associated technologies.

In this study we have demonstrated the potential of two-dimensional electrophoresis (2DE)-based technologies as tools for characterization of the Leishmania proteome (the expressed protein complement of the genome). Standardized neutral range (pH 5-7) proteome maps of Leishmania (Viannia) guyanensis and Leishmania (Viannia) panamensis promastigotes were reproducibly generated by 2DE of soluble parasite extracts, which were prepared using lysis buffer containing urea and nonidet P-40 detergent. The Coomassie blue and silver nitrate staining systems both yielded good resolution and representation of protein spots, enabling the detection of approximately 800 and 1,500 distinct proteins, respectively. Several reference protein spots common to the proteomes of all parasite species/strains studied were isolated and identified by peptide mass spectrometry (LC-ES-MS/MS), and bioinformatics approaches as members of the heat shock protein family, ribosomal protein S12, kinetoplast membrane protein 11 and a hypothetical Leishmania-specific 13 kDa protein of unknown function. Immunoblotting of Leishmania protein maps using a monoclonal antibody resulted in the specific detection of the 81.4 kDa and 77.5 kDa subunits of paraflagellar rod proteins 1 and 2, respectively. Moreover, differences in protein expression profiles between distinct parasite clones were reproducibly detected through comparative proteome analyses of paired maps using image analysis software. These data illustrate the resolving power of 2DE-based proteome analysis. The production and basic characterization of good quality Leishmania proteome maps provides an essential first step towards comparative protein expression studies aimed at identifying the molecular determinants of parasite drug resistance and virulence, as well as discovering new drug and vaccine targets.

A fully adaptive numerical approximation for a two-dimensional epidemic model with nonlinear cross-diffusion

An epidemic model is formulated by a reactionâeuro"diffusion system where the spatial pattern formation is driven by cross-diffusion. The reaction terms describe the local dynamics of susceptible and infected species, whereas the diffusion terms account for the spatial distribution dynamics. For both self-diffusion and cross-diffusion, nonlinear constitutive assumptions are suggested. To simulate the pattern formation two finite volume formulations are proposed, which employ a conservative and a non-conservative discretization, respectively. An efficient simulation is obtained by a fully adaptive multiresolution strategy. Numerical examples illustrate the impact of the cross-diffusion on the pattern formation.

Fast low-specific absorption rate B0 -mapping along projections at high field using two-dimensional radiofrequency pulses.

PURPOSE: At 7 Tesla (T), conventional static field (B0 ) projection mapping techniques, e.g., FASTMAP, FASTESTMAP, lead to elevated specific absorption rates (SAR), requiring longer total acquisition times (TA). In this work, the series of adiabatic pulses needed for slab selection in FASTMAP is replaced by a single two-dimensional radiofrequency (2D-RF) pulse to minimize TA while ensuring equal shimming performance. METHODS: Spiral gradients and 2D-RF pulses were designed to excite thin slabs in the small tip angle regime. The corresponding selection profile was characterized in phantoms and in vivo. After optimization of the shimming protocol, the spectral linewidths obtained after 2D localized shimming were compared with conventional techniques and published values from (Emir et al NMR Biomed 2012;25:152-160) in six different brain regions. RESULTS: Results on healthy volunteers show no significant difference (P > 0.5) between the spectroscopic linewidths obtained with the adiabatic (TA = 4 min) and the new low-SAR and time-efficient FASTMAP sequence (TA = 42 s). The SAR can be reduced by three orders of magnitude and TA accelerated six times without impact on the shimming performances or quality of the resulting spectra. CONCLUSION: Multidimensional pulses can be used to minimize the RF energy and time spent for automated shimming using projection mapping at high field. Magn Reson Med, 2014. © 2014 Wiley Periodicals, Inc.

Differential protein labeling with thiol-reactive infrared DY-680 and DY-780 maleimides and analysis by two-dimensional gel electrophoresis.

Differential protein labeling with 2-DE separation is an effective method for distinguishing differences in the protein composition of two or more protein samples. Here, we report on a sensitive infrared-based labeling procedure, adding a novel tool to the many labeling possibilities. Defined amounts of newborn and adult mouse brain proteins and tubulin were exposed to maleimide-conjugated infrared dyes DY-680 and DY-780 followed by 1- and 2-DE. The procedure allows amounts of less than 5 microg of cysteine-labeled protein mixtures to be detected (together with unlabeled proteins) in a single 2-DE step with an LOD of individual proteins in the femtogram range; however, co-migration of unlabeled proteins and subsequent general protein stains are necessary for a precise comparison. Nevertheless, the most abundant thiol-labeled proteins, such as tubulin, were identified by MS, with cysteine-containing peptides influencing the accuracy of the identification score. Unfortunately, some infrared-labeled proteins were no longer detectable by Western blots. In conclusion, differential thiol labeling with infrared dyes provides an additional tool for detection of low-abundant cysteine-containing proteins and for rapid identification of differences in the protein composition of two sets of protein samples.

Computer-assisted two-dimensional preoperative planning for total hip arthroplasty: clinical evaluation.

The purpose of this study is to clinically validate a new two-dimensional preoperative planning software for cementless total hip arthroplasty (THA). Manual and two-dimensional computer-assisted planning were compared by an independent observer for each of the 30 patients with osteoarthritis who underwent THA. This study showed that there were no statistical differences between the results of both preoperative plans in terms of stem size and neck length (<1 size) and hip rotation center position (<5 mm). Two-dimensional computer-assisted preoperative planning provided successful results comparable to those using the manual procedure, thereby allowing the surgeon to simulate various stem designs easily.

Two-dimensional probabilistic inversion of plane-wave electromagnetic data: Methodology, model constraints and joint inversion with electrical resistivity data

Probabilistic inversion methods based on Markov chain Monte Carlo (MCMC) simulation are well suited to quantify parameter and model uncertainty of nonlinear inverse problems. Yet, application of such methods to CPU-intensive forward models can be a daunting task, particularly if the parameter space is high dimensional. Here, we present a 2-D pixel-based MCMC inversion of plane-wave electromagnetic (EM) data. Using synthetic data, we investigate how model parameter uncertainty depends on model structure constraints using different norms of the likelihood function and the model constraints, and study the added benefits of joint inversion of EM and electrical resistivity tomography (ERT) data. Our results demonstrate that model structure constraints are necessary to stabilize the MCMC inversion results of a highly discretized model. These constraints decrease model parameter uncertainty and facilitate model interpretation. A drawback is that these constraints may lead to posterior distributions that do not fully include the true underlying model, because some of its features exhibit a low sensitivity to the EM data, and hence are difficult to resolve. This problem can be partly mitigated if the plane-wave EM data is augmented with ERT observations. The hierarchical Bayesian inverse formulation introduced and used herein is able to successfully recover the probabilistic properties of the measurement data errors and a model regularization weight. Application of the proposed inversion methodology to field data from an aquifer demonstrates that the posterior mean model realization is very similar to that derived from a deterministic inversion with similar model constraints.

Combined T2 -preparation and two-dimensional pencil-beam inner volume selection.

PURPOSE: To improve coronary magnetic resonance angiography (MRA) by combining a two-dimensional (2D) spatially selective radiofrequency (RF) pulse with a T2 -preparation module ("2D-T2 -Prep"). METHODS: An adiabatic T2 -Prep was modified so that the first and last pulses were of differing spatial selectivity. The first RF pulse was replaced by a 2D pulse, such that a pencil-beam volume is excited. The last RF pulse remains nonselective, thus restoring the T2 -prepared pencil-beam, while tipping the (formerly longitudinal) magnetization outside of the pencil-beam into the transverse plane, where it is then spoiled. Thus, only a cylinder of T2 -prepared tissue remains for imaging. Numerical simulations were followed by phantom validation and in vivo coronary MRA, where the technique was quantitatively evaluated. Reduced field-of-view (rFoV) images were similarly studied. RESULTS: In vivo, full field-of-view 2D-T2 -Prep significantly improved vessel sharpness as compared to conventional T2 -Prep, without adversely affecting signal-to-noise (SNR) or contrast-to-noise ratios (CNR). It also reduced respiratory motion artifacts. In rFoV images, the SNR, CNR, and vessel sharpness decreased, although scan time reduction was 60%. CONCLUSION: When compared with conventional T2 -Prep, the 2D-T2 -Prep improves vessel sharpness and decreases respiratory ghosting while preserving both SNR and CNR. It may also acquire rFoV images for accelerated data acquisition.

Information transfer between large and small two-dimensional polyacrylamide gel electrophoresis.

To determine the feasibility of data transfer, an interlaboratory comparison was conducted on colon carcinoma cell line (DLD-1) proteins resolved by two-dimensional polyacrylamide gel electrophoresis either on small (6 x 7 cm) or large (16x18 cm) gels. The gels were silver-stained and scanned by laser densitometry, and the image obtained was analyzed using Melanie software. The number of spots detected was 1337+/-161 vs. 2382+/-176 for small vs. large format gels, respectively. After gel calibration using landmarks determined using pl and Mr markers, large- and small-format gels were matched and 712+/-36 proteins were found on both types of gels. Having performed accurate gel matching it was possible to acquire additional information after accessing a 2-D PAGE reference database (http://www.expasy.ch/ cgibin/map2/def?DLD1_HUMAN). Thus, the difference in gel size is not an obstacle for data transfer. This will facilitate exchanges between laboratories or consultation concerning existing databases.

Improved temporal resolution for functional studies with reduced number of segments with three-dimensional echo planar imaging.

PURPOSE: To introduce a new k-space traversal strategy for segmented three-dimensional echo planar imaging (3D EPI) that encodes two partitions per radiofrequency excitation, effectively reducing the number excitations used to acquire a 3D EPI dataset by half. METHODS: The strategy was evaluated in the context of functional MRI applications for: image quality compared with segmented 3D EPI, temporal signal-to-noise ratio (tSNR) (the ability to detect resting state networks compared with multislice two-dimensional (2D) EPI and segmented 3D EPI, and temporal resolution (the ability to separate cardiac- and respiration-related fluctuations from the desired blood oxygen level-dependent signal of interest). RESULTS: Whole brain images with a nominal voxel size of 2 mm isotropic could be acquired with a temporal resolution under half a second using traditional parallel imaging acceleration up to 4× in the partition-encode direction and using novel data acquisition speed-up of 2× with a 32-channel coil. With 8× data acquisition speed-up in the partition-encode direction, 3D reduced excitations (RE)-EPI produced acceptable image quality without introduction of noticeable additional artifacts. Due to increased tSNR and better characterization of physiological fluctuations, the new strategy allowed detection of more resting state networks compared with multislice 2D-EPI and segmented 3D EPI. CONCLUSION: 3D RE-EPI resulted in significant increases in temporal resolution for whole brain acquisitions and in improved physiological noise characterization compared with 2D-EPI and segmented 3D EPI. Magn Reson Med 72:786-792, 2014. © 2013 Wiley Periodicals, Inc.

Organisation structurale du noyau et de microtubules de cellules de mammifères observés par cryo-microscopie électronique de sections hydratées

RESUME L'architecture nucléaire ainsi que l'ultrastructure des microtubules ont été abondamment étudiées par des méthodes cytochimiques utilisant des échantillons fixés chimiquement, enrobés dans des résines ou fixés à basse température. Les échantillons fixés à basse température pouvant aussi avoir été substitués, déshydratés et enrobés dans des résines pour la plupart hydrophiles. Ici, nous avons étendu ces études en utilisant la microscopie électronique effectuée sur des sections hydratées (CEMOVIS) permettant d'observer les échantillons dans un état le plus proche de leur état natif. De plus, nous avons effectué de la tomographie électronique sur des sections hydratées (TOVIS) afin d'obtenir une vision tridimensionnelle de : 1) la périphérie du noyau et de la région périchromatinienne et 2) de la lumière des microtubules. Concernant l'architecture nucléaire Nos observations montrent que le nucléole et la chromatine condensée sont facilement visualisés grâce à la texture spécifique qu'ils arborent. Au contraire, la visualisation de domaines nucléaires importants et spécialement ceux qui contiennent des ribonucléoprotéines, est rendue difficile, à cause du faible contraste qui caractérise l'espace interchromatinien. Ceci est essentiellement dû à la quantité d'information présente dans le volume de la section qui semble être superposée, lorsque observée sur des micrographies en deux dimensions. La tomographie nous a permis de mieux visualiser les différentes régions du noyau. Les mottes de chromatine condensée sont décorées à leur périphérie (région périchromatinienne), par nombre de fibrilles et granules. Des tunnels d'espace interchromatinien sont occasionnellement observés en train de traverser des régions de chromatine condensée favorisant l'accès aux pores nucléaires. Enfin, nous avons pu, au niveau d'un pore unique, observer la plupart des structures caractéristiques du complexe de pore nucléaire. Concernant l'ultrastructure des microtubules: Nous avons démontré que la polarité d'un microtubule observé in situ en section transversale, par CEMOVIS, est directement déduite de l'observation de la chiralité de ses protofilaments. Cette chiralité, a été établie précédemment comme étant liée à la morphologie des sous unités de tubuline. La tomographie électronique effectuée sur des sections hydratées, nous a permis d'observer les microtubules dans leur contexte cellulaire avec une résolution suffisante pour visualiser des détails moléculaires, comme les monomères de tubuline. Ainsi, des molécules n'ayant pas encore été caractérisées, ont été observées dans la lumière des microtubules. Ces observations ont été effectuées autant sur des cellules observées en coupe par CEMOVIS que sur des cellules congelées dans leur totalité par immersion dans un bain d'éthane liquide. Enfin, nous avons montré que les microtubules étaient aussi de formidables objets, permettant une meilleure compréhension des artéfacts de coupe occasionnés lors de la préparation des échantillons par CEMOVIS. Les buts des études qui seront menées â la suite de ce travail seront de 1) essayer de localiser des domaines nucléaires spécifiques par des approches cytochimiques avant la congélation des cellules. 2) Appliquer des méthodes de moyennage afin d'obtenir un modèle tridimensionnel de la structure du complexe de pore nucléaire dans son contexte cellulaire. 3) Utiliser des approches biochimiques afin de déterminer la nature exacte des particules qui se trouvent dans la lumière des microtubules. ABSTRACT Nuclear architecture as well as microtubule ultrastructure have been extensively investigated by means of different methods of ultrastructural cytochemistry using chemically fixed and resin embedded samples or following cryofixation, cryosubstitution and embedding into various, especially partially hydrophilic resins. Here, we extend these studies using cryoelectron microscopy of vitreous sections (CEMOVIS) which allows one to observe the specimen as close as possible to its native state. Furthermore, we applied cryoelectron tomography of vitreous sections (TOVIS) in order to obtain athree-dimensional view of: 1) the nuclear periphery, and of the perichromatin region, and 2) the microtubule lumen. Concerning the nuclear architecture: Our observations show that nucleoli and condensed chromatin are well recognisable due to their specific texture. Conversely, the visualisation of other important nuclear domains, especially those containing ribonucleoproteins, is seriously hampered by a generally low contrast of the interchromatin region. This is mainly due to the plethora of information superposed in the volume of the section observed on two-dimensional micrographs. Cryoelectron tomography allowed us to better visualise nuclear regions. Condensed chromatin clumps are decorated on their periphery, the perichromatin region, by numerous fibrils and granules. Tunnels of interchromatin space can occasionally be found as crossing condensed chromatin regions, thus, allowing the access to nuclear pores. Finally, we were able to use TOVIS to directly distinguish most of the nuclear pore complex structures, at the level of a single pore. Concerning the microtubule ultrastructure: We have demonstrated that the polarity of across-sectioned microtubule observed in situ by CEMOVIS wás directly deducible from the visualisation of the tubulin protofiíaments' chirality. This chirality has been established before as related to the shape. of the tubulin subunits. Cryoelectron tomography allowed us to observe microtubules in their cellular context at a resolution sufficient to resolve molecular details such as their tubulin monomers. In this way, uncharacterized molecules were visualised in the microtubule lumen. These observations were made either on samples prepared by CEMOVIS or plunge freezing of whole cells. Finally, we have shown that microtubules are also relevant objects for the understanding of cutting artefacts, when performing CEMOVIS. The goals of our further studies will be to: 1) try to speciifically target different nuclear domains by cytochemical approaches in situ, prior to cryofixation. 2) Apply averaging methods in order to obtain a three-dimensional model of the nuclear pore complex at work, in its cellular context. 3) Use biochemical analysis combined in a second time to immunocytochemical approaches, to determine the exact nature of the microtubule's luminal particles.

Three-dimensional sequence stratigraphy and subtle stratigraphic traps associated with systems tracts: West Cameron region, offshore Louisiana, Gulf of Mexico

Three-dimensional sequence stratigraphy is a potent exploration and development tool for the discovery of subtle stratigraphic traps. Reservoir morphology, heterogeneity and subtle stratigraphic trapping mechanisms can be better understood through systematic horizontal identification of sedimentary facies of systems tracts provided by three-dimensional attribute maps used as an important complement to the sequential analysis on the two-dimensional seismic lines and the well log data. On new prospects as well as on already-producing fields, the additional input of sequential analysis on three-dimensional data enables the identification, location and precise delimitation of new potentially productive zones. The first part of this paper presents four typical horizontal seismic facies assigned to the successive systems tracts of a third- or fourth-order sequence deposited in inner to outer neritic conditions on a elastic shelf. The construction of this synthetic representative sequence is based on the observed reproducibility of the horizontal seismic facies response to cyclic eustatic events on more than 35 sequences registered in the Gulf coast Plio-Pleistocene and Late Miocene, offshore Louisiana in the West Cameron region of the Gulf of Mexico. The second part shows how three-dimensional sequence stratigraphy can contribute in localizing and understanding sedimentary facies associated with productive zones. A case study in the early Middle Miocene Cibicides opima sands shows multiple stacked gas accumulations in the top slope fan, prograding wedge and basal transgressive systems tract of the third-order sequence between SB15.5 and SB 13.8 Ma.