Design and evaluation of a solid sampler for the monitoring of airborne 1,6-hexamethylene diisocyanate (HDI) and its prepolymers in 2-component spray painting

An active, solvent-free solid sampler was developed for the collection of 1,6-hexamethylene diisocyanate (HDI) aerosol and prepolymers. The sampler was made of a filter impregnated with 1-(2-methoxyphenyl)piperazine contained in a filter holder. Interferences with HDI were observed when a set of cellulose acetate filters and a polystyrene filter holder were used; a glass fiber filter and polypropylene filter cassette gave better results. The applicability of the sampling and analytical procedure was validated with a test chamber, constructed for the dynamic generation of HDI aerosol and prepolymers in commercial two-component spray paints (Desmodur(R) N75) used in car refinishing. The particle size distribution, temporal stability, and spatial uniformity of the simulated aerosol were established in order to test the sample. The monitoring of aerosol concentrations was conducted with the solid sampler paired to the reference impinger technique (impinger flasks contained 10 mL of 0.5 mg/mL 1-(2-methoxyphenyl)piperazine in toluene) under a controlled atmosphere in the test chamber. Analyses of derivatized HDI and prepolymers were carried out by using high-performance liquid chromatography and ultraviolet detection. The correlation between the solvent-free and the impinger techniques appeared fairly good (Y = 0.979X - 0.161; R = 0.978), when the tests were conducted in the range of 0.1 to 10 times the threshold limit value (TLV) for HDI monomer and up to 60-mu-g/m3 (3 U.K. TLVs) for total -N = C = O groups.

Impact of thermal proofing of a church on its indoor air-quality - The combustion of candles and incense as a source of pollution

Some years ago, a parish in Geneva decided to reduce heating costs by insulating its church to make it more energy efficient. Three years after the last renovations, it was observed that the internal surfaces of the naves had already become dusty compared with the customary frequency of 10-12 years. Dust even deposited on various surfaces during religious services. Our investigation showed that nearly all the dust found inside the church may in fact be soot from incense and candle combustion. Incense appears to be a significant source of polycyclic aromatic hydrocarbons. With a mechanical ventilation system and petrol lamps resembling candles the problem can be resolved.

Asthme professionnel dû aux isocyanates: nouvelles orientations des recherches en hygiène du travail

The replacement of the HDI monomer by less volatile prepolymers is not accompanied by a decrease of the incidence of occupational asthma in Switzerland. Field measurements show that the prepolymer concentration levels may be high although the monomer is hardly detectable or complies with the norm. Our researches are focused on the improvement of generation and measurement techniques (international quality control), on the characterization of the prepolymers to study their transformation in biological media. Field surveys will be conducted to establish the prepolymer concentration profiles. We recommend for the introduction in Switzerland of threshold limit values for HDI-biuret and isocyanurate.

Functional significance of first metatarso-phalangeal joint arthrodesis : FM101

Introduction: Indications for arthrodesis of the first metatarsophalangeal joint (MTP1) are commonly arthrosis (hallux rigidus), rheumatoid arthritis, failed hallux valgus surgery, severe hallux valgus, infectious arthritis, fractures and neuroarthropathies. Many reports focus on technical and radiological issues but few studies emphasize the functional outcome considering daily activities, sports and expectation of the patient. Method: We retrospectively reviewed the patients who underwent MTP1-arthrodesis from 2002 to 2005 in our institution. Clinical and radiological results were assessed but we specially focussed on the functional outcome. Scoring systems used were the SF-12, EQ-5D, PASI, FFI and AOFAS (10 points given to MTP1 mobility) scales. Results: 61 of 64 consecutive patients were evaluated. Female to male ratio was 49:15, mean age at surgery was 67 years, the average follow up was 29 month. Even if radiological consolidation was incomplete in 18 patients, all patients had a clinically stable and rigid arthrodesis. Mean AOFAS score was 87 (24-100) points at follow up. The FFI was 5.91% (0-66%). Patient satisfaction was excellent in 37 patients (60%), good in 18 (30%), fair in 5(8%) and poor in1 (2%). EQ- 5D was 0.7 (0.4-1).40 patients (66%) estimated their cosmetic result as excellent, 15 (25%) as good, 4(6%) as fair and 2 (3%)as poor. 10 patients (16%) had no shoe wear limitation , 48 (79%) had to wear comfortable shoes and 3 (5%) needed orthopaedic wearing. Professionally 34 patients (56%) had better performances, 18 (26%) had no change and 9 (18%) had aggravation of their capacities but this was due to other health reasons. In sports, 16 patients (26%) had better performances, 35 patients (57%) no change and 10 (17%) were worse as consequence of other health problems for 7. Finally, 56 patients (92%) would recommend the operation and 5 (8%) would not. Conclusion: Experience of clinical practice suggests that the idea of fusing the first MTP joint is initially frequently disregarded by the patients because they fear to be limited by a rigid forefoot. Our results show, in fact, that this procedure can be proposed for numerous pathological situations with the perspective of good to excellent outcome in terms of function and quality of life in the majority of cases.

Host factors in occupational diisocyanate asthma: a Swiss longitudinal study

Objective: To investigate the usefulness of surrogates for individual susceptibility to organic diisocyanates in occupational asthma. Subjects: All new cases declared to the Swiss National Accident Insurance Company (SUVA) for establishment of a case for compensable occupational disease during 1993. Sixty-nine persons, of whom three were women, were suspected of having occupational asthma due to isocyanates. Of these, 47 subjects fulfilled the criteria to be accepted as an occupational disease case. Methods: All subjects were studied clinically and gave a blood sample for the phenotyping of their alpha-antitrypsin status and for immunological studies. The subjects were also given a peroral dose of caffeine for the determination of their N-acetylation capacity. Finally, those with an occupational disease were subjected to the methacholine provocation test. Results: Forty-four persons with occupational disease, out of 47, were heterozygous antitrypsin carriers and/or slow acetylators of primary amines. In the bronchial provocation with methacholine, 12 of these subjects had an unaltered response and seven had a mild reaction, 13 a moderate one and 15 a severe reaction. Interpretation: The study confirms the finding that slow N-acetylators are susceptible to asthma from exposure to common diisocyanate monomers at work. The same applies to heterozygous antitrypsin-phenotype carriers. Thus, the use of these markers may reinforce the diagnostic procedure, but they cannot completely replace the immunological tests. [Authors]

Controlled dynamic generation of standard 1,6-hexamethylene diisocyanate aerosols

A procedure for the dynamic generation of 1,6-hexamethylene diisocyanate (HDI) aerosol atmospheres of 70 micrograms m-3 (0.01 ppm) to 1.75 mg m-3 (0.25 ppm), based on the precise control of the evaporation of pure liquid HDI and subsequent dilution with air, was developed. The apparatus consisted of a home-made glass nebulizer coupled with a separation stage to exclude non-respirable droplets (greater than 10 microns). The aerosol concentrations were achieved by passing air through the nebulizer at 1.5-4.5 l. min-1 to generate dynamically 0.01-0.25 ppm of diisocyanate in an experimental chamber of 8.55 m3. The distribution of the liquid aerosol was established with an optical counter and the diisocyanate concentration was determined from samples collected in impingers by a high-pressure liquid chromatographic method. The atmospheres generated were suitable for the evaluation both of sampling procedures full scale, and of analytical methods: at 140 micrograms m-3 (0.02 ppm) they remained stable for 15-min provocation tests in clinical asthma, as verified by breath-zone sampling of exposed patients.

A study compared nine patient-specific indices for musculoskeletal disorders.

BACKGROUND AND OBJECTIVE: Patient-specific quality of life indices show great potential, but certain conceptual and methodological concerns have yet to be fully addressed. The present study reviewed nine patient-specific instruments used in musculoskeletal disorders: the Canadian Occupational Performance Measure (COPM), Juvenile Arthritis Quality of life Questionnaire (JAQQ), McMaster-Toronto Arthritis questionnaire (MACTAR), Measure Yourself Medical Outcome Profile (MYMOP), Patient-Specific Index (PASI) for total hip arthroplasty, Problem Elicitation Technique (PET), Patient Generated Index (PGI) of quality of life, Patient-Specific Functional Scale (PSFS), and Schedule for the Evaluation of Individual Quality of Life (SEIQoL). STUDY DESIGN AND SETTING: Each tool was evaluated for purpose, content validity, face validity, feasibility, psychometric properties, and responsiveness. RESULTS: This critical appraisal revealed important differences in terms of the concept underlying these indices, the domains covered, the item-generation techniques and the scoring (response scale, methods) in each scale. The nine indices would generate different responses and likely scores for the same patient, despite the fact that they all include patient-generated items. CONCLUSION: Although the value of these indices in treatment planning and monitoring at an individual level is strong, more studies are needed to improve our understanding of how to interpret the numeric scores of patient-specific indices at both an individual and a group level.