Looking for orders of magnitude : five essays in trade and the environment and economic geography

General Summary Although the chapters of this thesis address a variety of issues, the principal aim is common: test economic ideas in an international economic context. The intention has been to supply empirical findings using the largest suitable data sets and making use of the most appropriate empirical techniques. This thesis can roughly be divided into two parts: the first one, corresponding to the first two chapters, investigates the link between trade and the environment, the second one, the last three chapters, is related to economic geography issues. Environmental problems are omnipresent in the daily press nowadays and one of the arguments put forward is that globalisation causes severe environmental problems through the reallocation of investments and production to countries with less stringent environmental regulations. A measure of the amplitude of this undesirable effect is provided in the first part. The third and the fourth chapters explore the productivity effects of agglomeration. The computed spillover effects between different sectors indicate how cluster-formation might be productivity enhancing. The last chapter is not about how to better understand the world but how to measure it and it was just a great pleasure to work on it. "The Economist" writes every week about the impressive population and economic growth observed in China and India, and everybody agrees that the world's center of gravity has shifted. But by how much and how fast did it shift? An answer is given in the last part, which proposes a global measure for the location of world production and allows to visualize our results in Google Earth. A short summary of each of the five chapters is provided below. The first chapter, entitled "Unraveling the World-Wide Pollution-Haven Effect" investigates the relative strength of the pollution haven effect (PH, comparative advantage in dirty products due to differences in environmental regulation) and the factor endowment effect (FE, comparative advantage in dirty, capital intensive products due to differences in endowments). We compute the pollution content of imports using the IPPS coefficients (for three pollutants, namely biological oxygen demand, sulphur dioxide and toxic pollution intensity for all manufacturing sectors) provided by the World Bank and use a gravity-type framework to isolate the two above mentioned effects. Our study covers 48 countries that can be classified into 29 Southern and 19 Northern countries and uses the lead content of gasoline as proxy for environmental stringency. For North-South trade we find significant PH and FE effects going in the expected, opposite directions and being of similar magnitude. However, when looking at world trade, the effects become very small because of the high North-North trade share, where we have no a priori expectations about the signs of these effects. Therefore popular fears about the trade effects of differences in environmental regulations might by exaggerated. The second chapter is entitled "Is trade bad for the Environment? Decomposing worldwide SO2 emissions, 1990-2000". First we construct a novel and large database containing reasonable estimates of SO2 emission intensities per unit labor that vary across countries, periods and manufacturing sectors. Then we use these original data (covering 31 developed and 31 developing countries) to decompose the worldwide SO2 emissions into the three well known dynamic effects (scale, technique and composition effect). We find that the positive scale (+9,5%) and the negative technique (-12.5%) effect are the main driving forces of emission changes. Composition effects between countries and sectors are smaller, both negative and of similar magnitude (-3.5% each). Given that trade matters via the composition effects this means that trade reduces total emissions. We next construct, in a first experiment, a hypothetical world where no trade happens, i.e. each country produces its imports at home and does no longer produce its exports. The difference between the actual and this no-trade world allows us (under the omission of price effects) to compute a static first-order trade effect. The latter now increases total world emissions because it allows, on average, dirty countries to specialize in dirty products. However, this effect is smaller (3.5%) in 2000 than in 1990 (10%), in line with the negative dynamic composition effect identified in the previous exercise. We then propose a second experiment, comparing effective emissions with the maximum or minimum possible level of SO2 emissions. These hypothetical levels of emissions are obtained by reallocating labour accordingly across sectors within each country (under the country-employment and the world industry-production constraints). Using linear programming techniques, we show that emissions are reduced by 90% with respect to the worst case, but that they could still be reduced further by another 80% if emissions were to be minimized. The findings from this chapter go together with those from chapter one in the sense that trade-induced composition effect do not seem to be the main source of pollution, at least in the recent past. Going now to the economic geography part of this thesis, the third chapter, entitled "A Dynamic Model with Sectoral Agglomeration Effects" consists of a short note that derives the theoretical model estimated in the fourth chapter. The derivation is directly based on the multi-regional framework by Ciccone (2002) but extends it in order to include sectoral disaggregation and a temporal dimension. This allows us formally to write present productivity as a function of past productivity and other contemporaneous and past control variables. The fourth chapter entitled "Sectoral Agglomeration Effects in a Panel of European Regions" takes the final equation derived in chapter three to the data. We investigate the empirical link between density and labour productivity based on regional data (245 NUTS-2 regions over the period 1980-2003). Using dynamic panel techniques allows us to control for the possible endogeneity of density and for region specific effects. We find a positive long run elasticity of density with respect to labour productivity of about 13%. When using data at the sectoral level it seems that positive cross-sector and negative own-sector externalities are present in manufacturing while financial services display strong positive own-sector effects. The fifth and last chapter entitled "Is the World's Economic Center of Gravity Already in Asia?" computes the world economic, demographic and geographic center of gravity for 1975-2004 and compares them. Based on data for the largest cities in the world and using the physical concept of center of mass, we find that the world's economic center of gravity is still located in Europe, even though there is a clear shift towards Asia. To sum up, this thesis makes three main contributions. First, it provides new estimates of orders of magnitudes for the role of trade in the globalisation and environment debate. Second, it computes reliable and disaggregated elasticities for the effect of density on labour productivity in European regions. Third, it allows us, in a geometrically rigorous way, to track the path of the world's economic center of gravity.

Genomics of the divergence continuum in an African plant biodiversity hotspot, I: drivers of population divergence in Restio capensis (Restionaceae).

Understanding the drivers of population divergence, speciation and species persistence is of great interest to molecular ecology, especially for species-rich radiations inhabiting the world's biodiversity hotspots. The toolbox of population genomics holds great promise for addressing these key issues, especially if genomic data are analysed within a spatially and ecologically explicit context. We have studied the earliest stages of the divergence continuum in the Restionaceae, a species-rich and ecologically important plant family of the Cape Floristic Region (CFR) of South Africa, using the widespread CFR endemic Restio capensis (L.) H.P. Linder & C.R. Hardy as an example. We studied diverging populations of this morphotaxon for plastid DNA sequences and >14 400 nuclear DNA polymorphisms from Restriction site Associated DNA (RAD) sequencing and analysed the results jointly with spatial, climatic and phytogeographic data, using a Bayesian generalized linear mixed modelling (GLMM) approach. The results indicate that population divergence across the extreme environmental mosaic of the CFR is mostly driven by isolation by environment (IBE) rather than isolation by distance (IBD) for both neutral and non-neutral markers, consistent with genome hitchhiking or coupling effects during early stages of divergence. Mixed modelling of plastid DNA and single divergent outlier loci from a Bayesian genome scan confirmed the predominant role of climate and pointed to additional drivers of divergence, such as drift and ecological agents of selection captured by phytogeographic zones. Our study demonstrates the usefulness of population genomics for disentangling the effects of IBD and IBE along the divergence continuum often found in species radiations across heterogeneous ecological landscapes.

Pluralized life courses? An exploration of the life trajectories of individuals with psychiatric disorders.

BACKGROUND: : Most of the existing research relating to the life courses of people with psychiatric symptoms focuses on the occurrence and the impact of non-normative events on the onsets of crises; it usually disregards the more regular dimensions of life, such as work, family and intimate partnerships that may be related to the timing and seriousness of psychiatric problems. An additional reason for empirically addressing life trajectories of individuals with psychiatric problems relates to recent changes of family and occupational trajectories in relation to societal trends such as individualization and pluralization of life courses.¦AIM: : This paper explores the life trajectories of 86 individuals under clinical supervision and proposes a typology of their occupational, co-residence and intimacy trajectories. The results are discussed in light of the life-course paradigm.¦METHOD: : A multidimensional optimal matching analysis was performed on a sample of 86 individuals under clinical supervision to create a typology of trajectories. The influence of these trajectories on psychiatric disorders, evaluated using a SCL-90-R questionnaire, was then assessed using linear regression modelling.¦RESULTS: : The typologies of trajectories showed that the patients developed a diversity of life trajectories. Individuals who have developed a standard life course with few institutionalization periods reported more symptoms and distress than individuals with an institutionalized life trajectory.¦CONCLUSION: : The results of this study stress that psychiatric patients are social actors who are influenced by society at large and its ongoing process of change. Therefore, it is essential to take into account the diversity of occupational and family trajectories when dealing with individuals in therapeutic settings.

Integrating detection probabilities in species distribution models of amphibians breeding in Mediterranean temporary ponds

Aim  The imperfect detection of species may lead to erroneous conclusions about species-environment relationships. Accuracy in species detection usually requires temporal replication at sampling sites, a time-consuming and costly monitoring scheme. Here, we applied a lower-cost alternative based on a double-sampling approach to incorporate the reliability of species detection into regression-based species distribution modelling.Location  Doñana National Park (south-western Spain).Methods  Using species-specific monthly detection probabilities, we estimated the detection reliability as the probability of having detected the species given the species-specific survey time. Such reliability estimates were used to account explicitly for data uncertainty by weighting each absence. We illustrated how this novel framework can be used to evaluate four competing hypotheses as to what constitutes primary environmental control of amphibian distribution: breeding habitat, aestivating habitat, spatial distribution of surrounding habitats and/or major ecosystems zonation. The study was conducted on six pond-breeding amphibian species during a 4-year period.Results  Non-detections should not be considered equivalent to real absences, as their reliability varied considerably. The occurrence of Hyla meridionalis and Triturus pygmaeus was related to a particular major ecosystem of the study area, where suitable habitat for these species seemed to be widely available. Characteristics of the breeding habitat (area and hydroperiod) were of high importance for the occurrence of Pelobates cultripes and Pleurodeles waltl. Terrestrial characteristics were the most important predictors of the occurrence of Discoglossus galganoi and Lissotriton boscai, along with spatial distribution of breeding habitats for the last species.Main conclusions  We did not find a single best supported hypothesis valid for all species, which stresses the importance of multiscale and multifactor approaches. More importantly, this study shows that estimating the reliability of non-detection records, an exercise that had been previously seen as a naïve goal in species distribution modelling, is feasible and could be promoted in future studies, at least in comparable systems.

GIS and geodatabases application to global scale plate tectonics modelling

Les reconstructions palinspastiques fournissent le cadre idéal à de nombreuses études géologiques, géographiques, océanographique ou climatiques. En tant qu?historiens de la terre, les "reconstructeurs" essayent d?en déchiffrer le passé. Depuis qu?ils savent que les continents bougent, les géologues essayent de retracer leur évolution à travers les âges. Si l?idée originale de Wegener était révolutionnaire au début du siècle passé, nous savons depuis le début des années « soixante » que les continents ne "dérivent" pas sans but au milieu des océans mais sont inclus dans un sur-ensemble associant croûte « continentale » et « océanique »: les plaques tectoniques. Malheureusement, pour des raisons historiques aussi bien que techniques, cette idée ne reçoit toujours pas l'écho suffisant parmi la communauté des reconstructeurs. Néanmoins, nous sommes intimement convaincus qu?en appliquant certaines méthodes et certains principes il est possible d?échapper à l?approche "Wégenerienne" traditionnelle pour enfin tendre vers la tectonique des plaques. Le but principal du présent travail est d?exposer, avec tous les détails nécessaires, nos outils et méthodes. Partant des données paléomagnétiques et paléogéographiques classiquement utilisées pour les reconstructions, nous avons développé une nouvelle méthodologie replaçant les plaques tectoniques et leur cinématique au coeur du problème. En utilisant des assemblages continentaux (aussi appelés "assemblées clés") comme des points d?ancrage répartis sur toute la durée de notre étude (allant de l?Eocène jusqu?au Cambrien), nous développons des scénarios géodynamiques permettant de passer de l?une à l?autre en allant du passé vers le présent. Entre deux étapes, les plaques lithosphériques sont peu à peu reconstruites en additionnant/ supprimant les matériels océaniques (symbolisés par des isochrones synthétiques) aux continents. Excepté lors des collisions, les plaques sont bougées comme des entités propres et rigides. A travers les âges, les seuls éléments évoluant sont les limites de plaques. Elles sont préservées aux cours du temps et suivent une évolution géodynamique consistante tout en formant toujours un réseau interconnecté à travers l?espace. Cette approche appelée "limites de plaques dynamiques" intègre de multiples facteurs parmi lesquels la flottabilité des plaques, les taux d'accrétions aux rides, les courbes de subsidence, les données stratigraphiques et paléobiogéographiques aussi bien que les évènements tectoniques et magmatiques majeurs. Cette méthode offre ainsi un bon contrôle sur la cinématique des plaques et fournit de sévères contraintes au modèle. Cette approche "multi-source" nécessite une organisation et une gestion des données efficaces. Avant le début de cette étude, les masses de données nécessaires était devenues un obstacle difficilement surmontable. Les SIG (Systèmes d?Information Géographiques) et les géo-databases sont des outils informatiques spécialement dédiés à la gestion, au stockage et à l?analyse des données spatialement référencées et de leurs attributs. Grâce au développement dans ArcGIS de la base de données PaleoDyn nous avons pu convertir cette masse de données discontinues en informations géodynamiques précieuses et facilement accessibles pour la création des reconstructions. Dans le même temps, grâce à des outils spécialement développés, nous avons, tout à la fois, facilité le travail de reconstruction (tâches automatisées) et amélioré le modèle en développant fortement le contrôle cinématique par la création de modèles de vitesses des plaques. Sur la base des 340 terranes nouvellement définis, nous avons ainsi développé un set de 35 reconstructions auxquelles est toujours associé un modèle de vitesse. Grâce à cet ensemble de données unique, nous pouvons maintenant aborder des problématiques majeurs de la géologie moderne telles que l?étude des variations du niveau marin et des changements climatiques. Nous avons commencé par aborder un autre problème majeur (et non définitivement élucidé!) de la tectonique moderne: les mécanismes contrôlant les mouvements des plaques. Nous avons pu observer que, tout au long de l?histoire de la terre, les pôles de rotation des plaques (décrivant les mouvements des plaques à la surface de la terre) tendent à se répartir le long d'une bande allant du Pacifique Nord au Nord de l'Amérique du Sud, l'Atlantique Central, l'Afrique du Nord, l'Asie Centrale jusqu'au Japon. Fondamentalement, cette répartition signifie que les plaques ont tendance à fuir ce plan médian. En l'absence d'un biais méthodologique que nous n'aurions pas identifié, nous avons interprété ce phénomène comme reflétant l'influence séculaire de la Lune sur le mouvement des plaques. La Lune sur le mouvement des plaques. Le domaine océanique est la clé de voute de notre modèle. Nous avons attaché un intérêt tout particulier à le reconstruire avec beaucoup de détails. Dans ce modèle, la croûte océanique est préservée d?une reconstruction à l?autre. Le matériel crustal y est symbolisé sous la forme d?isochrones synthétiques dont nous connaissons les âges. Nous avons également reconstruit les marges (actives ou passives), les rides médio-océaniques et les subductions intra-océaniques. En utilisant ce set de données très détaillé, nous avons pu développer des modèles bathymétriques 3-D unique offrant une précision bien supérieure aux précédents.<br/><br/>Palinspastic reconstructions offer an ideal framework for geological, geographical, oceanographic and climatology studies. As historians of the Earth, "reconstructers" try to decipher the past. Since they know that continents are moving, geologists a trying to retrieve the continents distributions through ages. If Wegener?s view of continent motions was revolutionary at the beginning of the 20th century, we know, since the Early 1960?s that continents are not drifting without goal in the oceanic realm but are included in a larger set including, all at once, the oceanic and the continental crust: the tectonic plates. Unfortunately, mainly due to technical and historical issues, this idea seems not to receive a sufficient echo among our particularly concerned community. However, we are intimately convinced that, by applying specific methods and principles we can escape the traditional "Wegenerian" point of view to, at last, reach real plate tectonics. This is the main aim of this study to defend this point of view by exposing, with all necessary details, our methods and tools. Starting with the paleomagnetic and paleogeographic data classically used in reconstruction studies, we developed a modern methodology placing the plates and their kinematics at the centre of the issue. Using assemblies of continents (referred as "key assemblies") as anchors distributed all along the scope of our study (ranging from Eocene time to Cambrian time) we develop geodynamic scenarios leading from one to the next, from the past to the present. In between, lithospheric plates are progressively reconstructed by adding/removing oceanic material (symbolized by synthetic isochrones) to major continents. Except during collisions, plates are moved as single rigid entities. The only evolving elements are the plate boundaries which are preserved and follow a consistent geodynamical evolution through time and form an interconnected network through space. This "dynamic plate boundaries" approach integrates plate buoyancy factors, oceans spreading rates, subsidence patterns, stratigraphic and paleobiogeographic data, as well as major tectonic and magmatic events. It offers a good control on plate kinematics and provides severe constraints for the model. This multi-sources approach requires an efficient data management. Prior to this study, the critical mass of necessary data became a sorely surmountable obstacle. GIS and geodatabases are modern informatics tools of specifically devoted to store, analyze and manage data and associated attributes spatially referenced on the Earth. By developing the PaleoDyn database in ArcGIS software we converted the mass of scattered data offered by the geological records into valuable geodynamical information easily accessible for reconstructions creation. In the same time, by programming specific tools we, all at once, facilitated the reconstruction work (tasks automation) and enhanced the model (by highly increasing the kinematic control of plate motions thanks to plate velocity models). Based on the 340 terranes properly defined, we developed a revised set of 35 reconstructions associated to their own velocity models. Using this unique dataset we are now able to tackle major issues of the geology (such as the global sea-level variations and climate changes). We started by studying one of the major unsolved issues of the modern plate tectonics: the driving mechanism of plate motions. We observed that, all along the Earth?s history, plates rotation poles (describing plate motions across the Earth?s surface) tend to follow a slight linear distribution along a band going from the Northern Pacific through Northern South-America, Central Atlantic, Northern Africa, Central Asia up to Japan. Basically, it sighifies that plates tend to escape this median plan. In the absence of a non-identified methodological bias, we interpreted it as the potential secular influence ot the Moon on plate motions. The oceanic realms are the cornerstone of our model and we attached a particular interest to reconstruct them with many details. In this model, the oceanic crust is preserved from one reconstruction to the next. The crustal material is symbolised by the synthetic isochrons from which we know the ages. We also reconstruct the margins (active or passive), ridges and intra-oceanic subductions. Using this detailed oceanic dataset, we developed unique 3-D bathymetric models offering a better precision than all the previously existing ones.

Preliminary Experience in Treatment of Papillary and Macular Retinoblastoma: Evaluation of Local Control and Local Complications After Treatment with Linear Accelerator-Based Stereotactic Radiotherapy with Micromultileaf Collimator as Second-Line or Salvage Treatment after chemotherapy.

PURPOSE: To determine the local control and complication rates for children with papillary and/or macular retinoblastoma progressing after chemotherapy and undergoing stereotactic radiotherapy (SRT) with a micromultileaf collimator. METHODS AND MATERIALS: Between 2004 and 2008, 11 children (15 eyes) with macular and/or papillary retinoblastoma were treated with SRT. The mean age was 19 months (range, 2-111). Of the 15 eyes, 7, 6, and 2 were classified as International Classification of Intraocular Retinoblastoma Group B, C, and E, respectively. The delivered dose of SRT was 50.4 Gy in 28 fractions using a dedicated micromultileaf collimator linear accelerator. RESULTS: The median follow-up was 20 months (range, 13-39). Local control was achieved in 13 eyes (87%). The actuarial 1- and 2-year local control rates were both 82%. SRT was well tolerated. Late adverse events were reported in 4 patients. Of the 4 patients, 2 had developed focal microangiopathy 20 months after SRT; 1 had developed a transient recurrence of retinal detachment; and 1 had developed bilateral cataracts. No optic neuropathy was observed. CONCLUSIONS: Linear accelerator-based SRT for papillary and/or macular retinoblastoma in children resulted in excellent tumor control rates with acceptable toxicity. Additional research regarding SRT and its intrinsic organ-at-risk sparing capability is justified in the framework of prospective trials.

Risk-based modelling of diffuse land use impacts from rural landscapes upon salmonid fry abundance

Research has demonstrated that landscape or watershed scale processes can influence instream aquatic ecosystems, in terms of the impacts of delivery of fine sediment, solutes and organic matter. Testing such impacts upon populations of organisms (i.e. at the catchment scale) has not proven straightforward and differences have emerged in the conclusions reached. This is: (1) partly because different studies have focused upon different scales of enquiry; but also (2) because the emphasis upon upstream land cover has rarely addressed the extent to which such land covers are hydrologically connected, and hence able to deliver diffuse pollution, to the drainage network However, there is a third issue. In order to develop suitable hydrological models, we need to conceptualise the process cascade. To do this, we need to know what matters to the organism being impacted by the hydrological system, such that we can identify which processes need to be modelled. Acquiring such knowledge is not easy, especially for organisms like fish that might occupy very different locations in the river over relatively short periods of time. However, and inevitably, hydrological modellers have started by building up piecemeal the aspects of the problem that we think matter to fish. Herein, we report two developments: (a) for the case of sediment associated diffuse pollution from agriculture, a risk-based modelling framework, SCIMAP, has been developed, which is distinct because it has an explicit focus upon hydrological connectivity; and (b) we use spatially distributed ecological data to infer the processes and the associated process parameters that matter to salmonid fry. We apply the model to spatially distributed salmon and fry data from the River Eden, Cumbria, England. The analysis shows, quite surprisingly, that arable land covers are relatively unimportant as drivers of fry abundance. What matters most is intensive pasture, a land cover that could be associated with a number of stressors on salmonid fry (e.g. pesticides, fine sediment) and which allows us to identify a series of risky field locations, where this land cover is readily connected to the river system by overland flow. (C) 2010 Elsevier B.V. All rights reserved.

Modelling the effect of minor orthopaedic day surgery on patient mood at the early post-operative period: a prospective population-based cohort study.

OBJECTIVE: The effect of minor orthopaedic day surgery (MiODS) on patient's mood. METHODS: A prospective population-based cohort study of 148 consecutive patients with age above 18 and less than 65, an American Society of Anaesthesiology (ASA) score of 1, and the requirement of general anaesthesia (GA) were included. The Medical Outcomes Study - Short Form 36 (SF-36), Beck Anxiety Inventory (BAI) and Beck Depression Inventory (BDI) were used pre- and post-operatively. RESULTS: The mean physical component score of SF-36 before surgery was 45.3 (SD=+/-10.1) and 8 weeks following surgery was 44.9 (SD=+/-11.04) [n=148, p=0.51, 95% CI=(-1.03 to 1.52)]. For the measurement of the changes in mood using BDI, BAI and SF-36, latent construct modelling was employed to increase validity. The covariance between mood pre- and post-operatively (cov=69.44) corresponded to a correlation coefficient, r=0.88 indicating that patients suffering a greater number of mood symptoms before surgery continue to have a greater number of symptoms following surgery. When the latent mood constructs were permitted to have different means the model fitted well with chi(2) (df=1)=0.86 for which p=0.77, thus the null hypothesis that MiODS has no effect on patient mood was rejected. CONCLUSIONS: MiODS affects patient mood which deteriorates at 8 weeks post-operatively regardless of the pre-operative patient mood state. More importantly patients suffering a greater number of mood symptoms before MiODS continue to have a greater number of symptoms following surgery.

Stochastic Population Projection for Germany - based on the Quadratic Spline approach to modelling age specific fertility rates

This contribution builds upon a former paper by the authors (Lipps and Betz 2004), in which a stochastic population projection for East- and West Germany is performed. Aim was to forecast relevant population parameters and their distribution in a consistent way. We now present some modifications, which have been modelled since. First, population parameters for the entire German population are modelled. In order to overcome the modelling problem of the structural break in the East during reunification, we show that the adaptation process of the relevant figures by the East can be considered to be completed by now. As a consequence, German parameters can be modelled just by using the West German historic patterns, with the start-off population of entire Germany. Second, a new model to simulate age specific fertility rates is presented, based on a quadratic spline approach. This offers a higher flexibility to model various age specific fertility curves. The simulation results are compared with the scenario based official forecasts for Germany in 2050. Exemplary for some population parameters (e.g. dependency ratio), it can be shown that the range spanned by the medium and extreme variants correspond to the s-intervals in the stochastic framework. It seems therefore more appropriate to treat this range as a s-interval covering about two thirds of the true distribution.

A bio-inspired agent-based programming environment for pervasive platforms

Abstract in English : Ubiquitous Computing is the emerging trend in computing systems. Based on this observation this thesis proposes an analysis of the hardware and environmental constraints that rule pervasive platforms. These constraints have a strong impact on the programming of such platforms. Therefore solutions are proposed to facilitate this programming both at the platform and node levels. The first contribution presented in this document proposes a combination of agentoriented programming with the principles of bio-inspiration (Phylogenesys, Ontogenesys and Epigenesys) to program pervasive platforms such as the PERvasive computing framework for modeling comPLEX virtually Unbounded Systems platform. The second contribution proposes a method to program efficiently parallelizable applications on each computing node of this platform. Résumé en Français : Basée sur le constat que les calculs ubiquitaires vont devenir le paradigme de programmation dans les années à venir, cette thèse propose une analyse des contraintes matérielles et environnementale auxquelles sont soumises les plateformes pervasives. Ces contraintes ayant un impact fort sur la programmation des plateformes. Des solutions sont donc proposées pour faciliter cette programmation tant au niveau de l'ensemble des noeuds qu'au niveau de chacun des noeuds de la plateforme. La première contribution présentée dans ce document propose d'utiliser une alliance de programmation orientée agent avec les grands principes de la bio-inspiration (Phylogénèse, Ontogénèse et Épigénèse). Ceci pour répondres aux contraintes de programmation de plateformes pervasives comme la plateforme PERvasive computing framework for modeling comPLEX virtually Unbounded Systems . La seconde contribution propose quant à elle une méthode permettant de programmer efficacement des applications parallélisable sur chaque noeud de calcul de la plateforme

Modelling hydrodynamics in the Rio Parana, Argentina : an evaluation and inter-comparison of reduced-complexity and physics based models applied to a large sand-bed river

Depth-averaged velocities and unit discharges within a 30 km reach of one of the world's largest rivers, the Rio Parana, Argentina, were simulated using three hydrodynamic models with different process representations: a reduced complexity (RC) model that neglects most of the physics governing fluid flow, a two-dimensional model based on the shallow water equations, and a three-dimensional model based on the Reynolds-averaged Navier-Stokes equations. Row characteristics simulated using all three models were compared with data obtained by acoustic Doppler current profiler surveys at four cross sections within the study reach. This analysis demonstrates that, surprisingly, the performance of the RC model is generally equal to, and in some instances better than, that of the physics based models in terms of the statistical agreement between simulated and measured flow properties. In addition, in contrast to previous applications of RC models, the present study demonstrates that the RC model can successfully predict measured flow velocities. The strong performance of the RC model reflects, in part, the simplicity of the depth-averaged mean flow patterns within the study reach and the dominant role of channel-scale topographic features in controlling the flow dynamics. Moreover, the very low water surface slopes that typify large sand-bed rivers enable flow depths to be estimated reliably in the RC model using a simple fixed-lid planar water surface approximation. This approach overcomes a major problem encountered in the application of RC models in environments characterised by shallow flows and steep bed gradients. The RC model is four orders of magnitude faster than the physics based models when performing steady-state hydrodynamic calculations. However, the iterative nature of the RC model calculations implies a reduction in computational efficiency relative to some other RC models. A further implication of this is that, if used to simulate channel morphodynamics, the present RC model may offer only a marginal advantage in terms of computational efficiency over approaches based on the shallow water equations. These observations illustrate the trade off between model realism and efficiency that is a key consideration in RC modelling. Moreover, this outcome highlights a need to rethink the use of RC morphodynamic models in fluvial geomorphology and to move away from existing grid-based approaches, such as the popular cellular automata (CA) models, that remain essentially reductionist in nature. In the case of the world's largest sand-bed rivers, this might be achieved by implementing the RC model outlined here as one element within a hierarchical modelling framework that would enable computationally efficient simulation of the morphodynamics of large rivers over millennial time scales. (C) 2012 Elsevier B.V. All rights reserved.

Are niche-based species distribution models transferable in space?

Aim To assess the geographical transferability of niche-based species distribution models fitted with two modelling techniques. Location Two distinct geographical study areas in Switzerland and Austria, in the subalpine and alpine belts. Methods Generalized linear and generalized additive models (GLM and GAM) with a binomial probability distribution and a logit link were fitted for 54 plant species, based on topoclimatic predictor variables. These models were then evaluated quantitatively and used for spatially explicit predictions within (internal evaluation and prediction) and between (external evaluation and prediction) the two regions. Comparisons of evaluations and spatial predictions between regions and models were conducted in order to test if species and methods meet the criteria of full transferability. By full transferability, we mean that: (1) the internal evaluation of models fitted in region A and B must be similar; (2) a model fitted in region A must at least retain a comparable external evaluation when projected into region B, and vice-versa; and (3) internal and external spatial predictions have to match within both regions. Results The measures of model fit are, on average, 24% higher for GAMs than for GLMs in both regions. However, the differences between internal and external evaluations (AUC coefficient) are also higher for GAMs than for GLMs (a difference of 30% for models fitted in Switzerland and 54% for models fitted in Austria). Transferability, as measured with the AUC evaluation, fails for 68% of the species in Switzerland and 55% in Austria for GLMs (respectively for 67% and 53% of the species for GAMs). For both GAMs and GLMs, the agreement between internal and external predictions is rather weak on average (Kulczynski's coefficient in the range 0.3-0.4), but varies widely among individual species. The dominant pattern is an asymmetrical transferability between the two study regions (a mean decrease of 20% for the AUC coefficient when the models are transferred from Switzerland and 13% when they are transferred from Austria). Main conclusions The large inter-specific variability observed among the 54 study species underlines the need to consider more than a few species to test properly the transferability of species distribution models. The pronounced asymmetry in transferability between the two study regions may be due to peculiarities of these regions, such as differences in the ranges of environmental predictors or the varied impact of land-use history, or to species-specific reasons like differential phenotypic plasticity, existence of ecotypes or varied dependence on biotic interactions that are not properly incorporated into niche-based models. The lower variation between internal and external evaluation of GLMs compared to GAMs further suggests that overfitting may reduce transferability. Overall, a limited geographical transferability calls for caution when projecting niche-based models for assessing the fate of species in future environments.

A non-linear Bayesian approach for upscaling local-scale hydraulic conductivity measurements based on local- and regional-scale geophysical data

Significant progress has been made with regard to the quantitative integration of geophysical and hydrological data at the local scale. However, extending the corresponding approaches to the regional scale represents a major, and as-of-yet largely unresolved, challenge. To address this problem, we have developed an upscaling procedure based on a Bayesian sequential simulation approach. This method is then applied to the stochastic integration of low-resolution, regional-scale electrical resistivity tomography (ERT) data in combination with high-resolution, local-scale downhole measurements of the hydraulic and electrical conductivities. Finally, the overall viability of this upscaling approach is tested and verified by performing and comparing flow and transport simulation through the original and the upscaled hydraulic conductivity fields. Our results indicate that the proposed procedure does indeed allow for obtaining remarkably faithful estimates of the regional-scale hydraulic conductivity structure and correspondingly reliable predictions of the transport characteristics over relatively long distances.