In vitro compatibility of remifentanil hydrochloride and sufentanil citrate with selected drugs

: Objectives Physicochemical incompatibilities between intravenous drugs are a recurrent problem in intensive care units. The present study was aimed at investigating the physical compatibility of remifentanil and sufentanil with other drugs (insulin, midazolam, propofol, potassium chloride, magnesium sulfate, furosemide, heparin, monobasic potassium phosphate) that are frequently administered together intravenously. In addition, the physicochemical compatibility of three common associations of drugs was evaluated in glass tube tests and during dynamic simulated Y site administrations (remifentanil-insulin-midazolam; remifentanil-insulin-propofol; sufentanil-insulin-midazolam). Methods Physical compatibility was verified by visual inspection of the various mixtures (two, three or four drugs) in glass tubes and by pH determination of the mixtures collected during simulated Y site administrations. Solutions were considered as compatible in the absence of any visual change in the solution and of any significant variation in pH value. In addition, chemical stability was checked during in vitro dynamic simulations. The solutions were prepared in 50 ml syringes, placed on syringe pumps and connected to a Swan-Ganz catheter; the liquid collected at the tip was assayed by high performance liquid chromatography. Results In the visual examinations, only the associations of remifentanil and furosemide were incompatible. The three assayed associations were compatible in the tested proportion range over 24 h. Conclusions Remifentanil was physically compatible with the tested drugs, except for furosemide (Lasix; Sanofi-Aventis, 250 mg/25 ml) and physicochemically compatible with insulin and midazolam and insulin and propofol. Sufentanil was physically compatible with all tested drugs and physicochemically compatible with insulin and midazolam

Record keeping by Swiss physiotherapists--a national survey of knowledge regarding legal requirements.

A national survey conducted in Switzerland aimed to evaluate the knowledge of physiotherapists regarding the legal requirements for record keeping and to collect their feedback about record keeping in general. Three physiotherapists from various professional practice groups and a lawyer specialised in health law developed a questionnaire that was sent to the 7,753 members of two existing national associations of physiotherapists. The questionnaire evaluated the participants' knowledge by calculating a score of legal knowledge, which had a maximum of 30 points. We included 825 questionnaires in the analysis. The large majority (83.4%) of participants confessed an ignorance of the legal requirements concerning record keeping prior to the survey. The average score of legal compatibility was 8 points. The younger age of the physiotherapists was a significant predictor of having knowledge of the legal requirements for record keeping (p <0.001). The participants had an appreciation of the value of records, but they did not have the relevant knowledge regarding the legal requirements for keeping records. The participants blamed a lack of time and remuneration for their failure to keep records according to known requirements. All practising allied health professionals should keep up-to-date and accurate records that conform to active legal requirements and existing international guidelines. In addition to the existing legal requirements, the emergence of e-health and the electronic era will trigger major changes in patient record management by physiotherapists.

Feasibility and electromagnetic compatibility study of the ClearPEM front-end electronics for simultaneous PET-MR imaging

In this work we present a first feasibility study of the ClearPEM technology for simultaneous PET-MR imaging. The mutual electromagnetic interference (EMI) effects between both systems were evaluated on a 7 T magnet by characterizing the response behavior of the ClearPEM detectors and front-end electronics to pulsed RF power and switched magnetic field gradients; and by analyzing the MR system performance degradation from noise pickup into the RF receiver chain, and from magnetic susceptibility artifacts caused by PET front-end materials.

Implications of diagnosis related groups (DRGs) for the management of hospitals.

Although tremendous advances have been made in the diagnosis and treatment of patients, hospital administrative systems have progressed relatively slowly. The types of information available to managers in industrial sectors are not available in the health sector. For this reason, many phenomena, such as the variations of average costs and lengths of stay between different hospitals, have remained poorly explained.The DRG system defines groups of patients that consume relatively homogeneous quantities of hospital resources. On the basis, it is possible to standardize average lengths of stay and average hospital costs in terms of the differences in case mix treated. Thus DRGs can serve as an explanation of variations in these factors between different hospitals, and also (but not only) for prospective reimbursement schems. As in a number of other European countries, a project has been set up in Switzerland to examine the possibilities of using DRGs in hospital management, planning and financing.

Pratiques comptables des hôpitaux et faisabilité d'un calcul de coûts basés sur les Diagnosis Related Groups

Travaux effectués dans le cadre de l'étude "Case Mix" menée par l'Institut universitaire de médecine sociale et préventive de Lausanne et le Service de la santé publique et de la planification sanitaire du canton de Vaud, en collaboration avec les cantons de Berne, Fribourg, Genève, Jura, Neuchâtel, Soleure, Tessin et Valais

Rapid antagonistic coevolution between strains of the social amoeba Dictyostelium discoideum.

Social groups face a fundamental problem of overcoming selfish individuals capable of destroying cooperation. In the social amoeba Dictyostelium discoideum, there is evidence that some clones ('cheaters') contribute disproportionately to the viable spores in a fruiting body while avoiding the dead stalk cell fate. It remains unclear, however, whether this cheating is actually the product of selection. Here, I report the results of an experimental evolution study designed to test whether clones of D. discoideum will evolve resistance to cheating in the laboratory with genetic variation created only through spontaneous mutation. Two strains, one green fluorescent protein (GFP)-labelled and one wild-type, were allowed to grow and develop together before the wild-type strain was removed and replaced with a naïve strain evolving in parallel. Over the course of 10 social generations, the GFP-labelled strain reliably increased its representation in the spores relative to control populations that had never experienced the competitor. This competitive advantage extended to the non-social, vegetative growth portion of the life cycle, but not to pairwise competition with two other strains. These results indicate strong antagonism between strains, mediated by ample mutational variation for cheating and also suggest that arms races between strains in the wild may be common.

Faktorenanalytische Untersuchung und Rehabilitätsbestimmung der statischen und dynamischen Pupillometrie bei Normalpersonen und psychopathologischen Gruppen [Factor analytic study and determination of rehabilitation of static and dynamic pupillometry in normal persons and psychopathologic groups]

Variables measured during static and dynamic pupillometry were factor-analyzed. Following factors were obtained regardless whether investigations were carried out in normals or in psychiatric patients: A static factor, a dynamic factor, a stimulus-specific factor and a restitution-dependent factor. Evaluation of reliability in normals demonstrated a high reliability for the static variables of pupillometry.

ANIBAL, stable isotope-based quantitative proteomics by aniline and benzoic acid labeling of amino and carboxylic groups

Identification and relative quantification of hundreds to thousands of proteins within complex biological samples have become realistic with the emergence of stable isotope labeling in combination with high throughput mass spectrometry. However, all current chemical approaches target a single amino acid functionality (most often lysine or cysteine) despite the fact that addressing two or more amino acid side chains would drastically increase quantifiable information as shown by in silico analysis in this study. Although the combination of existing approaches, e.g. ICAT with isotope-coded protein labeling, is analytically feasible, it implies high costs, and the combined application of two different chemistries (kits) may not be straightforward. Therefore, we describe here the development and validation of a new stable isotope-based quantitative proteomics approach, termed aniline benzoic acid labeling (ANIBAL), using a twin chemistry approach targeting two frequent amino acid functionalities, the carboxylic and amino groups. Two simple and inexpensive reagents, aniline and benzoic acid, in their (12)C and (13)C form with convenient mass peak spacing (6 Da) and without chromatographic discrimination or modification in fragmentation behavior, are used to modify carboxylic and amino groups at the protein level, resulting in an identical peptide bond-linked benzoyl modification for both reactions. The ANIBAL chemistry is simple and straightforward and is the first method that uses a (13)C-reagent for a general stable isotope labeling approach of carboxylic groups. In silico as well as in vitro analyses clearly revealed the increase in available quantifiable information using such a twin approach. ANIBAL was validated by means of model peptides and proteins with regard to the quality of the chemistry as well as the ionization behavior of the derivatized peptides. A milk fraction was used for dynamic range assessment of protein quantification, and a bacterial lysate was used for the evaluation of relative protein quantification in a complex sample in two different biological states

Characterization of surface functional groups present on laboratory-generated and ambient aerosol particles by means of heterogeneous titration reactions

A Knudsen flow reactor has been used to quantify surface functional groups on aerosols collected in the field. This technique is based on a heterogeneous titration reaction between a probe gas and a specific functional group on the particle surface. In the first part of this work, the reactivity of different probe gases on laboratory-generated aerosols (limonene SOA, Pb(NO3)2, Cd(NO3)2) and diesel reference soot (SRM 2975) has been studied. Five probe gases have been selected for the quantitative determination of important functional groups: N(CH3)3 (for the titration of acidic sites), NH2OH (for carbonyl functions), CF3COOH and HCl (for basic sites of different strength), and O3 (for oxidizable groups). The second part describes a field campaign that has been undertaken in several bus depots in Switzerland, where ambient fine and ultrafine particles were collected on suitable filters and quantitatively investigated using the Knudsen flow reactor. Results point to important differences in the surface reactivity of ambient particles, depending on the sampling site and season. The particle surface appears to be multi-functional, with the simultaneous presence of antagonistic functional groups which do not undergo internal chemical reactions, such as acid-base neutralization. Results also indicate that the surface of ambient particles was characterized by a high density of carbonyl functions (reactivity towards NH2OH probe in the range 0.26-6 formal molecular monolayers) and a low density of acidic sites (reactivity towards N(CH3)3 probe in the range 0.01-0.20 formal molecular monolayer). Kinetic parameters point to fast redox reactions (uptake coefficient ?0>10-3 for O3 probe) and slow acid-base reactions (?0<10-4 for N(CH3)3 probe) on the particle surface. [Authors]

Psychometrics of the Dyadic Coping Inventory in three language groups

This article introduces the Dyadic Coping Inventory (DCI; Bodenmann, 2008) and aims (1) to investigate the reliability and aspects of the validity of the Italian and French versions of the DCI, and (2) to replicate its factor structure and reliabilities using a new Swiss German sample. Based on 216 German-, 378 Italian-, and 198 French-speaking participants, the factor structure of the original German inventory was able to be replicated by using principal components analysis in all three groups after excluding two items in the Italian and French versions. The latter were shown to be as reliable as the German version with the exception of the low reliabilities of negative dyadic coping in the French group. Confirmatory factor analyses provided additional support for delegated dyadic coping and evaluation of dyadic coping. Intercorrelations among scales were similar across all three languages groups with a few exceptions. Previous findings could be replicated in all three groups, showing that aspects of dyadic coping were more strongly related to marital quality than to dyadic communication. The use of the dyadic coping scales in the actor-partner interdependence model, the common fate model, and the mutual influence model is discussed.

Improving plant functional groups for dynamic models of biodiversity: at the crossroads between functional and community ecology

The pace of on-going climate change calls for reliable plant biodiversity scenarios. Traditional dynamic vegetation models use plant functional types that are summarized to such an extent that they become meaningless for biodiversity scenarios. Hybrid dynamic vegetation models of intermediate complexity (hybrid-DVMs) have recently been developed to address this issue. These models, at the crossroads between phenomenological and process-based models, are able to involve an intermediate number of well-chosen plant functional groups (PFGs). The challenge is to build meaningful PFGs that are representative of plant biodiversity, and consistent with the parameters and processes of hybrid-DVMs. Here, we propose and test a framework based on few selected traits to define a limited number of PFGs, which are both representative of the diversity (functional and taxonomic) of the flora in the Ecrins National Park, and adapted to hybrid-DVMs. This new classification scheme, together with recent advances in vegetation modeling, constitutes a step forward for mechanistic biodiversity modeling.