ANIBAL, stable isotope-based quantitative proteomics by aniline and benzoic acid labeling of amino and carboxylic groups

Identification and relative quantification of hundreds to thousands of proteins within complex biological samples have become realistic with the emergence of stable isotope labeling in combination with high throughput mass spectrometry. However, all current chemical approaches target a single amino acid functionality (most often lysine or cysteine) despite the fact that addressing two or more amino acid side chains would drastically increase quantifiable information as shown by in silico analysis in this study. Although the combination of existing approaches, e.g. ICAT with isotope-coded protein labeling, is analytically feasible, it implies high costs, and the combined application of two different chemistries (kits) may not be straightforward. Therefore, we describe here the development and validation of a new stable isotope-based quantitative proteomics approach, termed aniline benzoic acid labeling (ANIBAL), using a twin chemistry approach targeting two frequent amino acid functionalities, the carboxylic and amino groups. Two simple and inexpensive reagents, aniline and benzoic acid, in their (12)C and (13)C form with convenient mass peak spacing (6 Da) and without chromatographic discrimination or modification in fragmentation behavior, are used to modify carboxylic and amino groups at the protein level, resulting in an identical peptide bond-linked benzoyl modification for both reactions. The ANIBAL chemistry is simple and straightforward and is the first method that uses a (13)C-reagent for a general stable isotope labeling approach of carboxylic groups. In silico as well as in vitro analyses clearly revealed the increase in available quantifiable information using such a twin approach. ANIBAL was validated by means of model peptides and proteins with regard to the quality of the chemistry as well as the ionization behavior of the derivatized peptides. A milk fraction was used for dynamic range assessment of protein quantification, and a bacterial lysate was used for the evaluation of relative protein quantification in a complex sample in two different biological states

Characterization of surface functional groups present on laboratory-generated and ambient aerosol particles by means of heterogeneous titration reactions

A Knudsen flow reactor has been used to quantify surface functional groups on aerosols collected in the field. This technique is based on a heterogeneous titration reaction between a probe gas and a specific functional group on the particle surface. In the first part of this work, the reactivity of different probe gases on laboratory-generated aerosols (limonene SOA, Pb(NO3)2, Cd(NO3)2) and diesel reference soot (SRM 2975) has been studied. Five probe gases have been selected for the quantitative determination of important functional groups: N(CH3)3 (for the titration of acidic sites), NH2OH (for carbonyl functions), CF3COOH and HCl (for basic sites of different strength), and O3 (for oxidizable groups). The second part describes a field campaign that has been undertaken in several bus depots in Switzerland, where ambient fine and ultrafine particles were collected on suitable filters and quantitatively investigated using the Knudsen flow reactor. Results point to important differences in the surface reactivity of ambient particles, depending on the sampling site and season. The particle surface appears to be multi-functional, with the simultaneous presence of antagonistic functional groups which do not undergo internal chemical reactions, such as acid-base neutralization. Results also indicate that the surface of ambient particles was characterized by a high density of carbonyl functions (reactivity towards NH2OH probe in the range 0.26-6 formal molecular monolayers) and a low density of acidic sites (reactivity towards N(CH3)3 probe in the range 0.01-0.20 formal molecular monolayer). Kinetic parameters point to fast redox reactions (uptake coefficient ?0>10-3 for O3 probe) and slow acid-base reactions (?0<10-4 for N(CH3)3 probe) on the particle surface. [Authors]

Psychometrics of the Dyadic Coping Inventory in three language groups

This article introduces the Dyadic Coping Inventory (DCI; Bodenmann, 2008) and aims (1) to investigate the reliability and aspects of the validity of the Italian and French versions of the DCI, and (2) to replicate its factor structure and reliabilities using a new Swiss German sample. Based on 216 German-, 378 Italian-, and 198 French-speaking participants, the factor structure of the original German inventory was able to be replicated by using principal components analysis in all three groups after excluding two items in the Italian and French versions. The latter were shown to be as reliable as the German version with the exception of the low reliabilities of negative dyadic coping in the French group. Confirmatory factor analyses provided additional support for delegated dyadic coping and evaluation of dyadic coping. Intercorrelations among scales were similar across all three languages groups with a few exceptions. Previous findings could be replicated in all three groups, showing that aspects of dyadic coping were more strongly related to marital quality than to dyadic communication. The use of the dyadic coping scales in the actor-partner interdependence model, the common fate model, and the mutual influence model is discussed.

Improving plant functional groups for dynamic models of biodiversity: at the crossroads between functional and community ecology

The pace of on-going climate change calls for reliable plant biodiversity scenarios. Traditional dynamic vegetation models use plant functional types that are summarized to such an extent that they become meaningless for biodiversity scenarios. Hybrid dynamic vegetation models of intermediate complexity (hybrid-DVMs) have recently been developed to address this issue. These models, at the crossroads between phenomenological and process-based models, are able to involve an intermediate number of well-chosen plant functional groups (PFGs). The challenge is to build meaningful PFGs that are representative of plant biodiversity, and consistent with the parameters and processes of hybrid-DVMs. Here, we propose and test a framework based on few selected traits to define a limited number of PFGs, which are both representative of the diversity (functional and taxonomic) of the flora in the Ecrins National Park, and adapted to hybrid-DVMs. This new classification scheme, together with recent advances in vegetation modeling, constitutes a step forward for mechanistic biodiversity modeling.

The use of heterogeneous chemistry for the characterization of functional groups at the gas/particle interface of soot and TiO(2) nanoparticles

Six gases (N((CH3)3), NH2OH, CF3COOH, HCl, NO2, O3) were selected to probe the surface of seven combustion aerosol (amorphous carbon, flame soot) and three types of TiO2 nanoparticles using heterogeneous, that is gas-surface reactions. The gas uptake to saturation of the probes was measured under molecular flow conditions in a Knudsen flow reactor and expressed as a density of surface functional groups on a particular aerosol, namely acidic (carboxylic) and basic (conjugated oxides such as pyrones, N-heterocycles) sites, carbonyl (R1-C(O)-R2) and oxidizable (olefinic, -OH) groups. The limit of detection was generally well below 1% of a formal monolayer of adsorbed probe gas. With few exceptions most investigated aerosol samples interacted with all probe gases which points to the coexistence of different functional groups on the same aerosol surface such as acidic and basic groups. Generally, the carbonaceous particles displayed significant differences in surface group density: Printex 60 amorphous carbon had the lowest density of surface functional groups throughout, whereas Diesel soot recovered from a Diesel particulate filter had the largest. The presence of basic oxides on carbonaceous aerosol particles was inferred from the ratio of uptakes of CF3COOH and HCl owing to the larger stability of the acetate compared to the chloride counterion in the resulting pyrylium salt. Both soots generated from a rich and a lean hexane diffusion flame had a large density of oxidizable groups similar to amorphous carbon FS 101. TiO2 15 had the lowest density of functional groups among the three studied TiO2 nanoparticles for all probe gases despite the smallest size of its primary particles. The used technique enabled the measurement of the uptake probability of the probe gases on the various supported aerosol samples. The initial uptake probability, g0, of the probe gas onto the supported nanoparticles differed significantly among the various investigated aerosol samples but was roughly correlated with the density of surface groups, as expected. [Authors]

Impact of relative size and language on the attitudes between nations and linguistic groups : The case of Switzerland

This study explores the impact of relative size on the intra- and intergroup attitudes of groups who either share a language or have a different language. For that purpose, we examined international attitudes, comparing a small nation, Switzerland, and two larger nations, Germany and France. We found support for the assumption that large neighbouring nations pose a threat to the smaller nation's identity, especially when they are linguistically similar. Consequently, in line with Tajfel's Social Identity Theory (1978), the smaller nation's inhabitants evaluate those of the larger nation less positively, liking them less and perceiving them to be more arrogant than vice versa. By investigating the special case of the French-speaking and the German-speaking Swiss as linguistic groups within their own nation we were able to demonstrate that these groups seek support with the larger-linguistically-similar nation to defend themselves against the more direct in-country threat to their identity. They acknowledge the similarity with the larger nation, yet keep defending their social identity by expressing a dislike for this perceived similarity.

Evaluation of errors in alpine skiing video analysis

INTRODUCTION: Video records are widely used to analyze performance in alpine skiing at professional or amateur level. Parts of these analyses require the labeling of some movements (i.e. determining when specific events occur). If differences among coaches and differences for the same coach between different dates are expected, they have never been quantified. Moreover, knowing these differences is essential to determine which parameters reliable should be used. This study aimed to quantify the precision and the repeatability for alpine skiing coaches of various levels, as it is done in other fields (Koo et al, 2005). METHODS: A software similar to commercialized products was designed to allow video analyses. 15 coaches divided into 3 groups (5 amateur coaches (G1), 5 professional instructors (G2) and 5 semi-professional coaches (G3)) were enrolled. They were asked to label 15 timing parameters (TP) according to the Swiss ski manual (Terribilini et al, 2001) for each curve. TP included phases (initiation, steering I-II), body and ski movements (e.g. rotation, weighting, extension, balance). Three video sequences sampled at 25 Hz were used and one curve per video was labeled. The first video was used to familiarize the analyzer to the software. The two other videos, corresponding to slalom and giant slalom, were considered for the analysis. G1 realized twice the analysis (A1 and A2) at different dates and TP were randomized between both analyses. Reference TP were considered as the median of G2 and G3 at A1. The precision was defined as the RMS difference between individual TP and reference TP, whereas the repeatability was calculated as the RMS difference between individual TP at A1 and at A2. RESULTS AND DISCUSSION: For G1, G2 and G3, a precision of +/-5.6 frames, +/-3.0 and +/-2.0 frames, was respectively obtained. These results showed that G2 was more precise than G1, and G3 more precise than G2, were in accordance with group levels. The repeatability for G1 was +/-3.1 frames. Furthermore, differences among TP precision were observed, considering G2 and G3, with largest differences of +/-5.9 frames for "body counter rotation movement in steering phase II", and of 0.8 frame for "ski unweighting in initiation phase". CONCLUSION: This study quantified coach ability to label video in term of precision and repeatability. The best precision was obtained for G3 and was of +/-0.08s, which corresponds to +/-6.5% of the curve cycle. Regarding the repeatability, we obtained a result of +/-0.12s for G1, corresponding to +/-12% of the curve cycle. The repeatability of G2 and G3 are expected to be lower than the precision of G1 and the corresponding repeatability will be assessed soon. In conclusion, our results indicate that the labeling of video records is reliable for some TP, whereas caution is required for others. REFERENCES Koo S, Gold MD, Andriacchi TP. (2005). Osteoarthritis, 13, 782-789. Terribilini M, et al. (2001). Swiss Ski manual, 29-46. IASS, Lucerne.

The early IL-4 response to Leishmania major and the resulting Th2 cell maturation steering progressive disease in BALB/c mice are subject to the control of regulatory CD4+CD25+ T cells.

Susceptibility and development of Th2 cells in BALB/c mice infected with Leishmania major result from early IL-4 production by Vbeta4Valpha8 CD4+ T cells in response to the Leishmania homolog of mammalian RACK1 Ag. A role for CD4+CD25+ regulatory T cells in the control of this early IL-4 production was investigated by depleting in vivo this regulatory T cell population. Depletion induced an increase in the early burst of IL-4 mRNA in the draining lymph nodes of BALB/c mice, and exacerbated the course of disease with higher levels of IL-4 mRNA and protein in their lymph nodes. We further showed that transfer of 10(7) BALB/c spleen cells that were depleted of CD4+CD25+ regulatory T cells rendered SCID mice susceptible to infection and allowed Th2 differentiation while SCID mice reconstituted with 10(7) control BALB/c spleen cells were resistant to infection with L. major and developed a Th1 response. Treatment with a mAb against IL-4 upon infection with L. major in SCID mice reconstituted with CD25-depleted spleen cells prevented the development of Th2 polarization and rendered them resistant to infection. These results demonstrate that CD4+CD25+ regulatory T cells play a role in regulating the early IL-4 mRNA and the subsequent development of a Th2 response in this model of infection.

Modifying effect of dual antiplatelet therapy on incidence of stent thrombosis according to implanted drug-eluting stent type.

AIM: To investigate the putative modifying effect of dual antiplatelet therapy (DAPT) use on the incidence of stent thrombosis at 3 years in patients randomized to Endeavor zotarolimus-eluting stent (E-ZES) or Cypher sirolimus-eluting stent (C-SES). METHODS AND RESULTS: Of 8709 patients in PROTECT, 4357 were randomized to E-ZES and 4352 to C-SES. Aspirin was to be given indefinitely, and clopidogrel/ticlopidine for ≥3 months or up to 12 months after implantation. Main outcome measures were definite or probable stent thrombosis at 3 years. Multivariable Cox regression analysis was applied, with stent type, DAPT, and their interaction as the main outcome determinants. Dual antiplatelet therapy adherence remained the same in the E-ZES and C-SES groups (79.6% at 1 year, 32.8% at 2 years, and 21.6% at 3 years). We observed a statistically significant (P = 0.0052) heterogeneity in treatment effect of stent type in relation to DAPT. In the absence of DAPT, stent thrombosis was lower with E-ZES  vs. C-SES (adjusted hazard ratio 0.38, 95% confidence interval 0.19, 0.75; P = 0.0056). In the presence of DAPT, no difference was found (1.18; 0.79, 1.77; P = 0.43). CONCLUSION: A strong interaction was observed between drug-eluting stent type and DAPT use, most likely prompted by the vascular healing response induced by the implanted DES system. These results suggest that the incidence of stent thrombosis in DES trials should not be evaluated independently of DAPT use, and the optimal duration of DAPT will likely depend upon stent type (Clinicaltrials.gov number NCT00476957).

Clinical follow-up of women infected with human papillomavirus-16, either alone or with other human papillomavirus types : identification of different risk groups

Rapport de synthèse Objectifs : Évaluer l'impact clinique de femmes infectées par de multiples papillomavirus human (HPV) à haut risque dont le HPV 16 en comparaison de l'évolution de femmes infectées par du HPV 16 seul. Méthode : 169 femmes ont été classifiées en trois groupes, dépendant de leur profile HPV: HPV-16 seul, HPV-16 et un HPV de type bas risque, HPV-16 et un autre HPV à haut risque. Le HPV-DNA des frottis cervicaux a été analysé par polymerase chain reaction (PCR) et reverse line blot hybridization (RLBH). Toutes les femmes ont été suivies à la consultation de colposcopie pour une durée de 24 mois ou plus. La prise en charge s'est faite selon les recommandations de Bethesda. Résultats : Les femmes infectées par du HPV 16 et un autre HPV à haut risque n'ont présenté aucun changement voire une progression de leur dysplasie en comparaison des femmes des autres groupes (RR: 1.39; 95%CI: 1.07 à 1.82; p value: 0.02 à 6 mois; RR: 2.10; 95%CI: 1.46 à 3.02; p value: <0.001 à 12 mois; RR: 1.82; 95%CI: 1.21 à 2.72; p value: 0.004 à 24 mois). Conclusions : Les femmes présentant une co-infection par du HPV 16 ainsi qu'un autre HPV de haut risque voient leur risque d'évolution défavorable augmenter.

Socioeconomic groups and cancer risk at death in the Swiss Canton of Vaud.

Data collected by the Cancer Registry of the Canton of Vaud, Switzerland, were used to estimate proportional mortality ratios (PMR) and mortality odds ratios (MOR) for various neoplasms according to social class and sector of occupation (agriculture versus others). Mortality ratios were elevated in lower social classes for cancers of the lung (MOR = 1.18 for social class IV or V vs I or II) and other sites strictly related to tobacco (mouth or pharynx, oesophagus and larynx; MOR = 1.70), and (though not significantly) for cancers of the stomach (MOR = 1.16) and uterus (MOR = 1.30 for cervix and 1.47 for corpus uteri). Furthermore, there was a strong negative social class gradient for thyroid cancer (a neoplasm with particularly elevated incidence and mortality in Switzerland), probably attributable to higher prevalence of iodine deficiency in lower social classes (MOR = 3.17). Positive social class gradients emerged for cancers of the intestines (MOR = 0.77 for social class IV or V), skin (MOR = 0.74) and prostate (MOR = 0.87). Agricultural workers showed decreased ratios for cancers of the lung (MOR = 0.75), cervix uteri (MOR = 0.72) and prostate (MOR = 0.80), and excess mortality from cancers of the upper digestive and respiratory sites (MOR = 1.22), stomach (MOR = 1.18), testis (MOR = 2.05) and lympho-haematopoietic neoplasms, particularly myeloma (MOR = 2.14).

Unequal Representation of Age Groups in Switzerland

The representation of age groups is becoming an increasingly discussed topic in Swiss politics. In this study, we explore inequalities in the descriptive and substantive representation of various age groups and find that despite important disparities in descriptive representation, the policy preferences of various age groups are relatively equally represented in the lower house of the Swiss parliament. Our analysis thus suggests that even if it is gaining visibility, the age cleavage is not central for parliamentary representation in Switzerland.