Contribution of fine particulate matter sources to indoor exposure in bars, restaurants, and cafes

This study investigated the contribution of sources and establishment characteristics, on the exposure to fine particulate matter (PM(2.5)) in the non-smoking sections of bars, cafes, and restaurants in central Zurich. PM(2.5)-exposure was determined with a nephelometer. A random sample of hospitality establishments was investigated on all weekdays, from morning until midnight. Each visit lasted 30 min. Numbers of smokers and other sources, such as candles and cooking processes, were recorded, as were seats, open windows, and open doors. Ambient air pollution data were obtained from public authorities. Data were analysed using robust MM regression. Over 14 warm, sunny days, 102 establishments were measured. Average establishment PM(2.5) concentrations were 64.7 microg/m(3) (s.d. = 73.2 microg/m(3), 30-min maximum 452.2 microg/m(3)). PM(2.5) was significantly associated with the number of smokers, percentage of seats occupied by smokers, and outdoor PM. Each smoker increased PM(2.5) on average by 15 microg/m(3). No associations were found with other sources, open doors or open windows. Bars had more smoking guests and showed significantly higher concentrations than restaurants and cafes. Smokers were the most important PM(2.5)-source in hospitality establishments, while outdoor PM defined the baseline. Concentrations are expected to be even higher during colder, unpleasant times of the year. PRACTICAL IMPLICATIONS: Smokers and ambient air pollution are the most important sources of fine airborne particulate matter (PM(2.5)) in the non-smoking sections of bars, restaurants, and cafes. Other sources do not significantly contribute to PM(2.5)-levels, while opening doors and windows is not an efficient means of removing pollutants. First, this demonstrates the impact that even a few smokers can have in affecting particle levels. Second, it implies that creating non-smoking sections, and using natural ventilation, is not sufficient to bring PM(2.5) to levels that imply no harm for employees and non-smoking clients. [Authors]

Crohn's disease-associated polymorphism within the PTPN2 gene affects muramyl-dipeptide-induced cytokine secretion and autophagy.

BACKGROUND: The single nucleotide polymorphism (SNP) rs2542151 within the gene locus region encoding protein tyrosine phosphatase non-receptor type 2 (PTPN2) has been associated with Crohn's disease (CD), ulcerative colitis (UC), type-I diabetes, and rheumatoid arthritis. We have previously shown that PTPN2 regulates mitogen-activated protein kinase (MAPK) signaling and cytokine secretion in human THP-1 monocytes and intestinal epithelial cells (IEC). Here, we studied whether intronic PTPN2 SNP rs1893217 regulates immune responses to the nucleotide-oligomerization domain 2 (NOD2) ligand, muramyl-dipeptide (MDP). MATERIALS AND METHODS: Genomic DNA samples from 343 CD and 663 non-IBD control patients (male and female) from a combined German, Swiss, and Polish cohort were genotyped for the presence of the PTPN2 SNPs, rs2542151, and rs1893217. PTPN2-variant rs1893217 was introduced into T(84) IEC or THP-1 cells using a lentiviral vector. RESULTS: We identified a novel association between the genetic variant, rs1893217, located in intron 7 of the PTPN2 gene and CD. Human THP-1 monocytes carrying this variant revealed increased MAPK activation as well as elevated mRNA expression of T-bet transcription factor and secretion of interferon-γ in response to the bacterial wall component, MDP. In contrast, secretion of interleukin-8 and tumor necrosis factor were reduced. In both, T(84) IEC and THP-1 monocytes, autophagosome formation was impaired. CONCLUSIONS: We identified a novel CD-associated PTPN2 variant that modulates innate immune responses to bacterial antigens. These findings not only provide key insights into the effects of a functional mutation on a clinically relevant gene, but also reveal how such a mutation could contribute to the onset of disease.

Who wrote the Second Ave maris stella of Tomás Luis de Victoria?

Contrary to what Felipe Pedrell indicates, the second Ave maris stella in his Victoria's collected works (vol. V, 1908, pp. 100-3, n° 33) doesn't appear in the collection published in 1600 in Madrid by the composer, nor in any other of the musician's books. In the 1600 edition, Victoria reissues the two first verses (plainchant followed by polyphony) of the Ave maris stella published in 1576 and then again in 1581. The earliest source of the problematic Ave maris stella is Munich, Bayerische Staatsbibliothek, Musik-Abteilung, 2 Mus. pr. 23 handschriftlicher Beiband, dating from the third quarter oft he seventeenth century. This source is a manuscrit that runs as an appendix to the 1581 edition of Victoria's hymns. No attributions are given in the manuscript. The first attributions of the piece to Victoria arise in the nineteenth century, in manuscripts copied by Johann Michael Hauber, Johann Caspar Aiblinger, August Baumgartner and Carl Proske, and preserved in Munich and Regensburg. Proske pubished the piece in his Musica divina in 1859 (Annus primus, vol. III, pp. 419-24). The most probable hypothesis ist that Pedrell had knowledge of the second Ave maris stella, under the spanish composer's name, via Proske's Musica divina. In all likelihood the piece is not by Victoria, not least because the composer has never written odd polyphonic verses of hymns. In his Studies in the Music of Tomás Luis de Victoria (2001), Eugene Casjen Cramer relies on the supposed authenticity of the work to ascribe the others pieces of Munich, Bayerische Staatsbibliothek, Musik-Abteilung, 2 Mus. pr. 23 handschriftlicher Beiband to the composer. These attributions should therefore be refuted.

Limitations and information needs for engineered nanomaterial-specific exposure estimation and scenarios: recommendations for improved reporting practices

The aim of this paper is to describe the process and challenges in building exposure scenarios for engineered nanomaterials (ENM), using an exposure scenario format similar to that used for the European Chemicals regulation (REACH). Over 60 exposure scenarios were developed based on information from publicly available sources (literature, books, and reports), publicly available exposure estimation models, occupational sampling campaign data from partnering institutions, and industrial partners regarding their own facilities. The primary focus was on carbon-based nanomaterials, nano-silver (nano-Ag) and nano-titanium dioxide (nano-TiO2), and included occupational and consumer uses of these materials with consideration of the associated environmental release. The process of building exposure scenarios illustrated the availability and limitations of existing information and exposure assessment tools for characterizing exposure to ENM, particularly as it relates to risk assessment. This article describes the gaps in the information reviewed, recommends future areas of ENM exposure research, and proposes types of information that should, at a minimum, be included when reporting the results of such research, so that the information is useful in a wider context.

The jasmonate biochemical pathway.

Plants possess an interrelated and interacting family of potent fatty acid-derived regulators--the jasmonates. These compounds, which play roles in both defense and development, are derived from tri-unsaturated fatty acids [alpha-linolenic acid (18:3) or 7Z,10Z,13Z-hexadecatrienoic acid (16:3)]. The lipoxygenase-catalyzed addition of molecular oxygen to alpha-linolenic acid initiates jasmonate synthesis by providing a 13-hydroperoxide substrate for the formation of an unstable allene oxide that is then subject to enzyme-guided cyclization to produce 12-oxo-phytodienoic acid (OPDA). OPDA, a key regulatory lipid in the plant immune system, has several fates, including esterification into plastid lipids or transformation into the 12-carbon co-regulator jasmonic acid (JA). JA, the best-characterized member of the family, regulates both male and female fertility (depending on the plant species), and is an important mediator of defense gene expresssion. JA is itself a substrate for further diverse modifications. Genetic dissection of the pathway is revealing how the different jasmonates modulate different physiological processes. Each new family member that is discovered provides another key to understanding the fine control of gene expression in immune responses, in the initiation and maintenance of long-distance signal transfer in response to wounding, and in the regulation of fertility, among other processes. The Jasmonate Biochemical Pathway provides an overview of the growing jasmonate family, and new members will be included in future versions of the Connections Map. Science Viewpoint R. Liechti, E. E. Farmer, The jasmonate pathway. Science 296, 1649-1650 (2002). [Abstract] [Full Text]

Passivrauchbelastung in Zürich Bars, Cafés und Restaurants

Im Spätsommer 2008 wurde eine Studie zur Passivrauchbelastung in Zürcher Gaststätten durchgeführt. In dieser Zeit werden die geringsten Konzentrationen erwartet wegen offenen Fenster und wenig Gästen im Inneren von Gebäuden. In 102 Gaststätten wurde PM2.5 Feinstaub im Nichtraucherbereich zu verschiedenen Tageszeiten und Wochentagen gemessen. Die Innenluftkonzentration betrug durchschnittlich 64.7 microg/m3 mit Maximalwerten von über 450 microg/m3. Raucher wurden als wesentliche Quelle identifiziert und trugen im Schnitt 15 microg/m3 zur PM2.5-Belastung bei. Für einen durchschnittlichen Angestellten bedeuten diese Werte eine Erhöhung der Feinstaubbelastung um fast 20%, was einer Erhöhung des Mortalitätsrisikos um rund 10% entspricht. Die Studie zeigt, dass Raucher massgeblich zur Feinstaubbelastung in Restaurants beitragen und die reslutierenden Werte das Risiko von Angestellten (und Gästen) stark erhöhen.

Industrial nanoparticle application : representative survey among Swiss companies shows low usage and basic protection means

Manufactured nanoparticles are introduced into industrial processes, but they are suspected to cause similar negative health effects as ambient particles. The poor knowledge about the scale of this introduction did not allow global risk analysis so far. In 2006 a targeted telephone survey among Swiss companies (1) showed the usage of nanoparticles in a few selected companies but did not provide data to extrapolate on the totality of the Swiss workforce. To gain this kind of information a layered representative questionnaire survey among 1'626 Swiss companies was conducted in 2007. Data was collected about the number of potentially exposed persons in the companies and their protection strategy. The response rate was 58.3%. An expected number of 586 companies (95%−confidence interval 145 to 1'027) was shown by this study to use nanoparticles in Switzerland. Estimated 1'309 (1'073 to 1'545) workers do their job in the same room as a nanoparticle application. Personal protection was shown to be the predominant type of protection means. Companies starting productions with nanomaterials need to consider incorporating protection measures into the plans. This will not only benefit the workers' health, but will also likely increase the competitiveness of the companies. Technical and organisational protection means are not only more cost−effective on the long term, but are also easier to control. Guidelines may have to be designed specifically for different industrial applications, including fields outside nanotechnology, and adapted to all sizes of companies.

Traitement par radiofréquence de l'oesophage de Barrett [Radiofrequency ablation for Barret's esophagus].

Barrett's esophagus consists of the replacement of normal squamous epithelium by a specialised columnar lined epithelium referred to as intestinal metaplasia in the esophagus. It represents a premalignant lesion. The prevalence of Barrett's esophagus is around 1.6%. Esophageal adenocarcinoma results from the development of dysplasia progressing from low to high grade dysplasia and finally adenocarcinoma. Radiofrequency ablation currently represents the treatment of choice in eradicating Barrett's esophagus with associated dysplasia. The technique is based on the application of a radiofrequency current that enables the destruction of the superficial modified epithelium. This new approach presents a good security profile and, compared to other ablative techniques, shows superior results regarding Barrett's eradication.

Fc block treatment, dead cells exclusion, and cell aggregates discrimination concur to prevent phenotypical artifacts in the analysis of subpopulations of tumor-infiltrating CD11b(+) myelomonocytic cells.

It is well established that cancer cells can recruit CD11b(+) myeloid cells to promote tumor angiogenesis and tumor growth. Increasing interest has emerged on the identification of subpopulations of tumor-infiltrating CD11b(+) myeloid cells using flow cytometry techniques. In the literature, however, discrepancies exist on the phenotype of these cells (Coffelt et al., Am J Pathol 2010;176:1564-1576). Since flow cytometry analysis requires particular precautions for accurate sample preparation and trustable data acquisition, analysis, and interpretation, some discrepancies might be due to technical reasons rather than biological grounds. We used the syngenic orthotopic 4T1 mammary tumor model in immunocompetent BALB/c mice to analyze and compare the phenotype of CD11b(+) myeloid cells isolated from peripheral blood and from tumors, using six-color flow cytometry. We report here that the nonspecific antibody binding through Fc receptors, the presence of dead cells and cell doublets in tumor-derived samples concur to generate artifacts in the phenotype of tumor-infiltrating CD11b(+) subpopulations. We show that the heterogeneity of tumor-infiltrating CD11b(+) subpopulations analyzed without particular precautions was greatly reduced upon Fc block treatment, dead cells, and cell doublets exclusion. Phenotyping of tumor-infiltrating CD11b(+) cells was particularly sensitive to these parameters compared to circulating CD11b(+) cells. Taken together, our results identify Fc block treatment, dead cells, and cell doublets exclusion as simple but crucial steps for the proper analysis of tumor-infiltrating CD11b(+) cell populations.

Personalized drug administrations using Support Vector Machine

The decision-making process regarding drug dose, regularly used in everyday medical practice, is critical to patients' health and recovery. It is a challenging process, especially for a drug with narrow therapeutic ranges, in which a medical doctor decides the quantity (dose amount) and frequency (dose interval) on the basis of a set of available patient features and doctor's clinical experience (a priori adaptation). Computer support in drug dose administration makes the prescription procedure faster, more accurate, objective, and less expensive, with a tendency to reduce the number of invasive procedures. This paper presents an advanced integrated Drug Administration Decision Support System (DADSS) to help clinicians/patients with the dose computing. Based on a support vector machine (SVM) algorithm, enhanced with the random sample consensus technique, this system is able to predict the drug concentration values and computes the ideal dose amount and dose interval for a new patient. With an extension to combine the SVM method and the explicit analytical model, the advanced integrated DADSS system is able to compute drug concentration-to-time curves for a patient under different conditions. A feedback loop is enabled to update the curve with a new measured concentration value to make it more personalized (a posteriori adaptation).

L'hypnose intégrée aux soins de patients brûlés: impact sur le niveau de stress de l'equipe soignante [Hypnosis integrated in burn care: impact on the healthcare team's stress].

Hypnosis for burn care was introduced in 2004 in the CHUV burn center showing great benefit for burned patients. Whereas advantages of hypnosis for the patient are well established, the impact on the medical staff remains poorly assessed. This manuscrit reviews current attested benefits of hypnosis for patients, specially for burned patients. The results of a recent study assessing the impact of hypnosis on the staffs level of stress caused by burn treatment, will also be introduced.

Research and development, where people are exposed to nanomaterials

OBJECTIVES: Many nanomaterials (materials with structures smaller than 100 nm) have chemical, physical and bioactive characteristics of interest for novel applications. Considerable research efforts have been launched in this field. This study aimed to study exposure scenarios commonly encountered in research settings. METHODS: We studied one of the leading Swiss universities and first identified all research units dealing with nanomaterials. After a preliminary evaluation of quantities and process types used, a detailed analysis was conducted in units where more than a few micrograms were used per week. RESULTS: In the investigated laboratories, background levels were usually low and in the range of a few thousand particles per cubic centimeter. Powder applications resulted in concentrations of 10,000 to 100,000 particles/cm(3) when measured inside fume hoods, but there were no or mostly minimal increases in the breathing zone of researchers. Mostly low exposures were observed for activities involving liquid applications. However, centrifugation and lyophilization of nanoparticle-containing solutions resulted in high particle number levels (up to 300,000 particles/cm(3)) in work spaces where researchers did not always wear respiratory protection. No significant increases were found for processes involving nanoparticles bound to surfaces, nor were they found in laboratories that were visualizing properties and structure of small amounts of nanomaterials. CONCLUSIONS: Research activities in modern laboratories equipped with control techniques were associated with minimal releases of nanomaterials into the working space. However, the focus should not only be on processes involving nanopowders but should also be on processes involving nanoparticle-containing liquids, especially if the work involves physical agitation, aerosolization or drying of the liquids.