Biokinetics and dosimetry of (111)In-DOTA-NOC-ATE compared with (111)In-DTPA-octreotide.

PURPOSE: The biokinetics and dosimetry of (111)In-DOTA-NOC-ATE (NOCATE), a high-affinity ligand of SSTR-2 and SSTR-5, and (111)In-DTPA-octreotide (Octreoscan?, OCTREO) were compared in the same patients. METHODS: Seventeen patients (10 men, 7 women; mean age 60 years), referred for an OCTREO scan for imaging of a neuroendocrine tumour (15), thymoma (1) or medullary thyroid carcinoma (1), agreed to undergo a second study with NOCATE. Whole-body anterior-posterior scans were recorded 0.5 (100 % reference scan), 4, 24 and 48 h (17 patients) and 120 h (5 patients) after injection. In 16 patients the OCTREO scan (178 ± 15 MBq) was performed 16 ± 5 days before the NOCATE scan (108 ± 14 MBq) with identical timing; 1 patient had the NOCATE scan before the OCTREO scan. Blood samples were obtained from 14 patients 5 min to 48 h after injection. Activities expressed as percent of the initial (reference) activity in the whole body, lung, kidney, liver, spleen and blood were fitted to biexponential or single exponential functions. Dosimetry was performed using OLINDA/EXM. RESULTS: Initial whole-body, lung and kidney activities were similar, but retention of NOCATE was higher than that of OCTREO. Liver and spleen uptakes of NOCATE were higher from the start (p < 0.001) and remained so over time. Whole-body activity showed similar α and β half-lives, but the β fraction of NOCATE was double that of OCTREO. Blood T (1/2)β for NOCATE was longer (19 vs. 6 h). As a result, the effective dose of NOCATE (105 μSv/MBq) exceeded that of OCTREO (52 μSv/MBq), and the latter result was similar to the ICRP 106 value of 54 μSv/MBq. Differential activity measurement in blood cells and plasma showed an average of <5 % of NOCATE and OCTREO attached to globular blood components. CONCLUSION: NOCATE showed a slower clearance from normal tissues and its effective dose was roughly double that of OCTREO.

Classification des leucémies aiguës par les marqueurs de surface et corrélation avec le diagnostic morphologique résultats sur 111 cas

111 patients with acute leukemia, including 29 children, were classified according to the surface markers and cytochemistry of their blasts. The acute leukemias were separated into two majors groups (lymphoid and non-lymphoid) depending on the presence or absence of specific lymphoid markers. On the basis of these criteria a correlation of 94% with the hematological diagnosis was obtained. Acute lymphoblastic leukemia (ALL) was divisible into three sub-groups: 11 cases expressing T-cell specific markers were classified as T-ALL and 33 cases expressing the common ALL antigen (CALLA) as c-ALL. 18 of the latter expressed an additional marker, DSA (Daudi surface antigen), splitting c-ALL cases in two subgroups. Cytochemistry of the cases lacking specific surface markers (n = 67) served to diagnose 41 acute myeloid leukemia (AML) cases and 8 monoblastic leukemias. The remaining 18 cases could not be classified. The presence of absence of HLD-DR (Ia) antigens served to subdivide AML into two major subgroups. The prognostic significance of these new diagnostic splits is under active study.

Heat capacity measurements on the equiatomic compounds in Ni-X (X = Al, In, Si, Ge and Bi) and M-Sb (with M = Ni, Co and Fe) systems

Molar heat capacities of the binary compounds NiAl, NiIn, NiSi, NiGe, NiBi, NiSb, CoSb and FeSb were determined every 10 K by differential scanning calorimetry in the temperature range 310-1080 K. The experimental results have been fitted versus temperature according to C-p = a + b . T + c . T-2 + d . T-2. Results are given, discussed and compared to estimations found in the literature. Two compounds, NiBi and FeSb, are subject to transformations between 460 and 500 K. (C) 1999 Elsevier Science Ltd. All rights reserved.

Thermodynamic investigations in the Si-Ge-rich part of the ruthenium-silicon-germanium system

This paper reports molar heat capacities of Ru50SixGe(50-x) and Ru40SiyGe(60-y) ternary solid solutions determined by differential scanning calorimetry. A second order transition has been characterised for alloys ranging from Ru40Ge60 to Ru40Si10Ge50 at temperatures ranging from 850 to 1040 K, respectively. Tie lines have been established at 1000-900-800-700-600 degrees C by electron microprobe measurements on annealed alloys of the two phase domains: Ru50SixGe(50-x)-Ru40SiyGe(60-y) and Ru40SiyGe(60-y)-SizGe(100-z).

Combining clinical factors and quantitative ultrasound improves the detection of women both at low and high risk for hip fracture.

We hypothesized that combining clinical risk factors (CRF) with the heel stiffness index (SI) measured via quantitative ultrasound (QUS) would improve the detection of women both at low and high risk for hip fracture. Categorizing women by risk score improved the specificity of detection to 42.4%, versus 33.8% using CRF alone and 38.4% using the SI alone. This combined CRF-SI score could be used wherever and whenever DXA is not readily accessible. INTRODUCTION AND HYPOTHESIS: Several strategies have been proposed to identify women at high risk for osteoporosis-related fractures; we wanted to investigate whether combining clinical risk factors (CRF) and heel QUS parameters could provide a more accurate tool to identify women at both low and high risk for hip fracture than either CRF or QUS alone. METHODS: We pooled two Caucasian cohorts, EPIDOS and SEMOF, into a large database named "EPISEM", in which 12,064 women, 70 to 100 years old, were analyzed. Amongst all the CRF available in EPISEM, we used only the ones which were statistically significant in a Cox multivariate model. Then, we constructed a risk score, by combining the QUS-derived heel stiffness index (SI) and the following seven CRF: patient age, body mass index (BMI), fracture history, fall history, diabetes history, chair-test results, and past estrogen treatment. RESULTS: Using the composite SI-CRF score, 42% of the women who did not report a hip fracture were found to be at low risk at baseline, and 57% of those who subsequently sustained a fracture were at high risk. Using the SI alone, corresponding percentages were 38% and 52%; using CRF alone, 34% and 53%. The number of subjects in the intermediate group was reduced from 5,400 (including 112 hip fractures) and 5,032 (including 111 hip fractures) to 4,549 (including 100 including fractures) for the CRF and QUS alone versus the combination score. CONCLUSIONS: Combining clinical risk factors to heel bone ultrasound appears to correctly identify more women at low risk for hip fracture than either the stiffness index or the CRF alone; it improves the detection of women both at low and high risk.

Santé au travail : approche moléculaire pour évaluer le risque de l'exposition aux bioaérosols sur les lieux de travail

RESUME : Dans de nombreux environnements professionnels, des travailleurs sont exposés à des bioaérosols, que ce soit des bactéries, champignons, virus ou fragments de microorganismes. Ces bioaérosols peuvent être responsables de maladies infectieuses (p.ex. légionellose), ou de maladies non infectieuses (touchant principalement les voies respiratoires). Cependant, pour une majorité des bioaérosols, les relations entre une exposition à une certaine dose et les effets sur la santé humaine sont peu connues. Ce manque de connaissances étant dû principalement à une absence de méthodes adéquates permettant de quantifier cette exposition. La real-time quantitative PCR (Q-PCR) est un outil basé sur la quantification du DNA dont le potentiel de quantification des bioaérosols dans des environnements professionnels n'a pas été exploré. Le but de ce travail est de développer une méthode de Q-PCR permettant de quantifier des bioaérosols - en particulier des bactéries - et d'appliquer ces techniques pour des mesures préventives sur les lieux de travail. Dans ce travail, la Q-PCR a été appliquée à 1a quantification de pathogènes, de groupes taxonomiques spécifiques et de la charge bactérienne totale dans des environnements de travail, stations d'épuration et élevages industriels de volailles. Nous avons montré que la Q-PCR : 1) est capable de quantifier des pathogènes difficilement cultivables si ceux-ci sont présents en concentration importante, 2) a le potentiel pour être un outil performant dans l'étude des communautés bactériennes présentes dans l'air d'environnements professionnels, 3) est aussi performante que le comptage total des bactéries par DAPI pour quantifier 1a charge bactérienne totale et est donc une alternative prometteuse aux techniques culture-dépendantes. La Q-PCR pourrait être utilisée afin d'établir des relations doses-réponses pour la charge bactérienne ; soit dans des populations de travailleurs hautement exposés (p.ex. les éleveurs de volailles), soit en exposant des cellules à des concentrations de bioaérosols mesurées par Q-PCR. ABSTRACT : Many workers are exposed to bioaerosols such as bacteria, fungi, viruses or fragments of microorganisms. These bioaerosols can be responsible of infectious (e.g. legionellosis) or non infectious diseases (mainly respiratory symptoms). However, for a majority of them, the relationship between exposure and effects on human health is not clearly established. This is mainly due to the lack of valid quantitative assessment methods. Real-time quantitative PCR (Q-PCR) is a tool based on the quantification of DNA, of which the potential for the quantification of bioaerosols in work environments has not yet been explored. The aim of this work was to develop a Q-PCR method permitting to quantify bioaerosols -mainly bacteria and to apply those techniques in occupational environments. In this work, Q-PCR was applied to the quantification of pathogens, of specific taxonomic groups and of the total bacterial load in two different occupational settings, namely wastewater treatment plants and poultry houses. We showed that Q-PCR : 1) is capable of quantifying difficult to cultivate pathogens; when they are present at high concentrations, 2) has the potential to be a useful tool for studying bacterial communities in the air of work environments, 3) is as efficient as epifluorescence for the quantification of total bacterial load, and is a promising alternative to the culture-dependent methods. Q-PCR could be used to establish doses-responses relationships for bacterial load, either in populations of highly exposed workers such as poultry farmers, or by exposing cells to concentrations of bioaerosols quantified with Q-PCR.

Isothermal sections of the Ru-Si-Ge, Ru-Ge-Sn and Ru-Si-Sn systems at 900°C

The ternary systems Ruthenium-Silicon-Germanium, Ruthenium-Germanium-Tin and Ruthenium-Silicon-Tin were investigated by powder X-ray diffraction and electron microprobe analysis. Relations at 900 degrees C between solid phases are given and no ternary compound was found. Solubilities and evolution of lattice parameters have been correlated. Maximum mutual solubilities in the Si-Sn and Ge-Sn systems are given. (C) 1998 Elsevier Science S.A.