43 resultados para Preparation of DMAB reagent
Resumo:
NanoImpactNet (NIN) is a multidisciplinary European Commission funded network on the environmental, health and safety (EHS) impact of nanomaterials. The 24 founding scientific institutes are leading European research groups active in the fields of nanosafety, nanorisk assessment and nanotoxicology. This 4−year project is the new focal point for information exchange within the research community. Contact with other stakeholders is vital and their needs are being surveyed. NIN is communicating with 100s of stakeholders: businesses; internet platforms; industry associations; regulators; policy makers; national ministries; international agencies; standard−setting bodies and NGOs concerned by labour rights, EHS or animal welfare. To improve this communication, internet research, a questionnaire distributed via partners and targeted phone calls were used to identify stakeholders' interests and needs. Knowledge gaps and the necessity for further data mentioned by representatives of all stakeholder groups in the targeted phone calls concerned: potential toxic and safety hazards of nanomaterials throughout their lifecycles; fate and persistence of nanoparticles in humans, animals and the environment; risks associated to nanoparticle exposure; participation in the preparation of nomenclature, standards, methodologies, protocols and benchmarks; development of best practice guidelines; voluntary schemes on responsibility; databases of materials, research topics and themes. Findings show that stakeholders and NIN researchers share very similar knowledge needs, and that open communication and free movement of knowledge will benefit both researchers and industry. Consequently NIN will encourage stakeholders to be active members. These survey findings will be used to improve NIN's communication tools to further build on interdisciplinary relationships towards a healthy future with nanotechnology.
Resumo:
Rapid diagnostic tests (RDT) are sometimes recommended to improve the home-based management of malaria. The accuracy of an RDT for the detection of clinical malaria and the presence of malarial parasites has recently been evaluated in a high-transmission area of southern Mali. During the same study, the cost-effectiveness of a 'test-and-treat' strategy for the home-based management of malaria (based on an artemisinin-combination therapy) was compared with that of a 'treat-all' strategy. Overall, 301 patients, of all ages, each of whom had been considered a presumptive case of uncomplicated malaria by a village healthworker, were checked with a commercial RDT (Paracheck-Pf). The sensitivity, specificity, and positive and negative predictive values of this test, compared with the results of microscopy and two different definitions of clinical malaria, were then determined. The RDT was found to be 82.9% sensitive (with a 95% confidence interval of 78.0%-87.1%) and 78.9% (63.9%-89.7%) specific compared with the detection of parasites by microscopy. In the detection of clinical malaria, it was 95.2% (91.3%-97.6%) sensitive and 57.4% (48.2%-66.2%) specific compared with a general practitioner's diagnosis of the disease, and 100.0% (94.5%-100.0%) sensitive but only 30.2% (24.8%-36.2%) specific when compared against the fulfillment of the World Health Organization's (2003) research criteria for uncomplicated malaria. Among children aged 0-5 years, the cost of the 'test-and-treat' strategy, per episode, was about twice that of the 'treat-all' (U.S.$1.0. v. U.S.$0.5). In older subjects, however, the two strategies were equally costly (approximately U.S.$2/episode). In conclusion, for children aged 0-5 years in a high-transmission area of sub-Saharan Africa, use of the RDT was not cost-effective compared with the presumptive treatment of malaria with an ACT. In older patients, use of the RDT did not reduce costs. The question remains whether either of the strategies investigated can be made affordable for the affected population.
Resumo:
X-ray microtomography has become a new tool in earth sciences to obtain non-destructive 3D-image data from geological objects in which variations in mineralogy, chemical composition and/or porosity create sufficient x-ray density contrasts.We present here first, preliminary results of an application to the external and internal morphology of Permian to Recent Larger Foraminifera. We use a SkyScan-1072 high-resolution desk-top micro-CT system. The system has a conical x-ray source with a spot size of about 5µm that runs at 20-100kV, 0-250µA, resulting in a maximal resolution of 5µm. X-ray transmission images are captured by a scintillator coupled via fibre optics to a 1024x1024 pixel 12-bit CCD. The object is placed between the x-ray source and the scintillator on a stub that rotates 360°around its vertical axis in steps as small as 0.24 degrees. Sample size is limited to 2 cm due to the absorption of geologic material for x-rays. The transmission images are back projected using a Feldkamp algorithm into a vertical stack of up to 1000 1Kx1K images that represent horizontal cuts of the object. This calculation takes 2 to several hours on a Double-Processor 2.4GHz PC. The stack of images (.bmp) can be visualized with any 3D-imaging software, used to produce cuts of Larger Foraminifera. Among other applications, the 3D-imaging software furnished by SkyScan can produce 3D-models by defining a threshold density value to distinguish "solid" from "void. Several models with variable threshold values and colors can be imbricated, rotated and cut together. The best results were obtained with microfossils devoid of chamber-filling cements (Permian, Eocene, Recent). However, even slight differences in cement mineralogy/composition can result in surprisingly good x-ray density contrasts.X-ray microtomography may develop into a powerful tool for larger microfossils with a complex internal structure, because it is non-destructive, requires no preparation of the specimens, and produces a true 3D-image data set. We will use these data sets in the future to produce cuts in any direction to compare them with arbitrary cuts of complex microfossils in thin sections. Many groups of benthic and planktonic foraminifera may become more easily determinable in thin section by this way.
Resumo:
NanoImpactNet (NIN) is a multidisciplinary European Commission funded network on the environmental, health and safety (EHS) impact of nanomaterials. The 24 founding scientific institutes are leading European research groups active in the fields of nanosafety, nanorisk assessment and nanotoxicology. This 4-year project is the new focal point for information exchange within the research community. Contact with other stakeholders is vital and their needs are being surveyed. NIN is communicating with 100s of stakeholders: businesses; internet platforms; industry associations; regulators; policy makers; national ministries; international agencies; standard-setting bodies and NGOs concerned by labour rights, EHS or animal welfare. To improve this communication, internet research, a questionnaire distributed via partners and targeted phone calls were used to identify stakeholders' interests and needs. Knowledge gaps and the necessity for further data mentioned by representatives of all stakeholder groups in the targeted phone calls concerned: • the potential toxic and safety hazards of nanomaterials throughout their lifecycles; • the fate and persistence of nanoparticles in humans, animals and the environment; • the associated risks of nanoparticle exposure; • greater participation in: the preparation of nomenclature, standards, methodologies, protocols and benchmarks; • the development of best practice guidelines; • voluntary schemes on responsibility; • databases of materials, research topics and themes, but also of expertise. These findings suggested that stakeholders and NIN researchers share very similar knowledge needs, and that open communication and free movement of knowledge will benefit both researchers and industry. Subsequently a workshop was organised by NIN focused on building a sustainable multi-stakeholder dialogue. Specific questions were asked to different stakeholder groups to encourage discussions and open communication. 1. What information do stakeholders need from researchers and why? The discussions about this question confirmed the needs identified in the targeted phone calls. 2. How to communicate information? While it was agreed that reporting should be enhanced, commercial confidentiality and economic competition were identified as major obstacles. It was recognised that expertise was needed in the areas of commercial law and economics for a wellinformed treatment of this communication issue. 3. Can engineered nanomaterials be used safely? The idea that nanomaterials are probably safe because some of them have been produced 'for a long time', was questioned, since many materials in common use have been proved to be unsafe. The question of safety is also about whether the public has confidence. New legislation like REACH could help with this issue. Hazards do not materialise if exposure can be avoided or at least significantly reduced. Thus, there is a need for information on what can be regarded as acceptable levels of exposure. Finally, it was noted that there is no such thing as a perfectly safe material but only boundaries. At this moment we do not know where these boundaries lie. The matter of labelling of products containing nanomaterials was raised, as in the public mind safety and labelling are connected. This may need to be addressed since the issue of nanomaterials in food, drink and food packaging may be the first safety issue to attract public and media attention, and this may have an impact on 'nanotechnology as a whole. 4. Do we need more or other regulation? Any decision making process should accommodate the changing level of uncertainty. To address the uncertainties, adaptations of frameworks such as REACH may be indicated for nanomaterials. Regulation is often needed even if voluntary measures are welcome because it mitigates the effects of competition between industries. Data cannot be collected on voluntary bases for example. NIN will continue with an active stakeholder dialogue to further build on interdisciplinary relationships towards a healthy future with nanotechnology.
Characterization of a plant-derived peptide displaying water clarifying and antimicrobial activities
Resumo:
SUMMARY Drinking water is currently a scarce world resource, the preparation of which requires complex treatments that include clarification of suspended particles and disinfection. Seed extracts of Moringa oleifera Lam., a tropical tree, have been proposed as an environment- friendly alternative, due to their traditional use for the clarification of drinking water. However, the precise nature of the active components was unknown. Here, we show that recombinant or synthetic forms of a cationic seed polypeptide mediate efficient sedimentation of suspended mineral particles and bacteria. Unexpectedly, the polypeptide was also found to possesses a bactericidal activity capable of disinfecting heavily contaminated water. Furthermore, the polypeptide has been shown to efficiently kill several pathogenic bacteria, including antibiotic-resistant isolates of Pseudomona, Streptococcus and Legionella species. Structural modeling of the peptide coupled to the functional analysis of synthetic peptide derivatives delineated distinct structural determinants for the flocculation and antibacterial activities. Our results suggest that a glutamine-rich portion of the polypeptide is involved in the sedimentation process; alternatively, the antibacterial activity depends on a amphiphilic loop. Assembly of multiple copies of this loop into a branched peptide derivative strongly enhances antibacterial activity without displaying hemolytic effect. In conclusion, this polypeptide displays the unprecedented feature of combining efficient water purification and disinfectant properties indicating different molecular mechanisms involved in each case. This work not only identified the features responsible for these activities but also provides useful information that has implications for the further development of this cationic polypeptide as a potent antibacterial agent. RESUME L'eau potable est actuellement une ressource limitée dans le monde. La production d'eau propre à la consommation exige des traitements complexes, incluant la clarification des particules en suspension ainsi que sa désinfection par des additifs chimiques. Les extraits de la graine d'un arbre tropical, Moringa oleifera, sont utilisés traditionnellement en Afrique afin de clarifier l'eau. Quoique la nature exacte des composants actifs était inconnue, on a pu mettre en évidence un polypeptide cationique contenu dans ces graines, capable de sédimenter de manière efficace des particules minérales en suspension ainsi que des bactéries. Ce travail a aussi mis en évidence que ce polypeptide a une activité bactéricide, permettant une désinfection d'eau fortement contaminée. De plus, nous avons démontré que ce polypeptide est efficace contre de nombreuses souches bactériennes pathogènes, également celles résistantes aux antibiotiques comme Pseudomonas, Streptococcus et Legionella. L'analyse de la structure moléculaire de ce polypeptide, couplée à son analyse fonctionnelle a mis en évidence deux domaines structuraux distinct, un pour l'activité de floculation et l'autre pour l'activité antibactérienne. Nos résultats suggèrent que le domaine riche en glutamine est impliqué dans le processus de sédimentation et que l'activité antimicrobienne dépend d'un domaine formant une boucle amphiphilique. En ramifiant plusieurs copies de cette boucle on a pu augmenter de manière significative l'activité antibactérienne. En conclusion, nous avons pu démontrer que ce polypeptide à la capacité unique de combiner des propriétés de purification et de désinfection de l'eau, ce qui implique des mécanismes moléculaires distincts pour ces deux activités. Ce travail a permis d'identifier les domaines du polypeptide qui sont responsables de ses activités et offre une perspective pour le développement d'un nouvel agent antimicrobien.
Resumo:
Aims: To investigate the long-term efficacy and safety of denosumab (DMAb) for the treatment of postmenopausal women with osteoporosis in an open-label extension to the 3-year FREEDOM study.1Methods: All women who completed the FREEDOM study were eligible to enter a long-term open-label extension (up to 10 years). After providing informed consent, participants received 6-monthly subcutaneous injections of DMAb (60 mg). Here we report data from the first year of followup. For women randomized to DMAb in the FREEDOM study ('long-term group'), this represents up to 48 months of DMAb exposure (eight 6-monthly injections). For those randomized to placebo ('de novo group') the data are from up to 12 months of exposure (two injections). All participants continued to take calcium (1 g) and vitamin D (≥400 IU) supplements daily. Changes in bone mineral density (BMD) and bone turnover markers (BTM) are reported for subjects enrolled in the extension. No formal statistical testing was planned for this interim report. P-values are descriptive.Results: Overall, 4,550 eligible women (70.2%) who completed the FREEDOM study entered the open-label extension study (long-term, n=2,343; de novo, n=2,207). During the first year of the extension, lumbar spine (LS) BMD in the long-term group further increased by 2.0% (12.1% increase vs. FREEDOM baseline at 48 months), and total hip (TH) BMD further increased by 0.8% (6.5% increase at 48 months) (p<0.0001 for both BMD gains during year 4; Fig. 1). During the first year of the extension, LS and TH BMD increased by 5.4% and 3.0%, respectively in the de novo group (both p<0.0001). After DMAb initiation, serum C-telopeptide (CTX) in the de novo group decreased rapidly and similarly to the long-term group (Fig. 2). Reductions in BTMs continue to attenuate at the end of the dosing interval as previously reported. Adverse event (AE) rates were similar (70.4% of women in the longterm group and 67.9% in the de novo group). Serious Aes were also similar (9.8% and 11.2% of women, respectively). During year 4, osteoporotic nonvertebral fractures were reported in 31 women in the long-term group and 51 in the denovo group.Fig. 1. Percentage change in BMD with denosumab for4 years (long-term) or 1 year (de novo)Fig. 2. Percentage change in sCTX over timeConclusions: These interim results suggest that continuation of DMAb treatment through 48 months is associated with further significant increases in spine and hip BMD with sustained reduction of bone turnover. The de-novo treatment group results confirm the first year active treatment findings previously reported1.Acknowledgements: Amgen Inc. sponsored this study. Figure ©2010, American Society for Bone and Mineral Research, used by permission, all rights reserved. Disclosure of Interest: H. Bone Grant/Research Support from: Amgen, Eli Lilly, Merck, Nordic Bioscience, Novartis, Takeda Pharmaceuticals, Consultant/Speaker's bureau/ Advisory activities with: Amgen, Merck, Takeda Pharmaceuticals, Zelos, S. Papapoulos Consultant/Speaker's bureau/ Advisory activities with: Amgen, Merck, Novartis, Lilly, Procter and Gamble, GSK, M.-L. Brandi Grant/Research Support from: MSD, GSK, Nycomed, NPS, Amgen, J. Brown Grant/Research Support from: Abbott, Amgen, Bristol Myers Squibb, Eli Lilly, Pfizer, Roche, Consultant/ Speaker's bureau/Advisory activities with: Abbott, Amgen, Eli Lilly, Novartis, Merck, Warner Chilcott,, R. Chapurlat Grant/Research Support from: Servier, Sanofi-Aventis, Warner-Chilcott, Novartis, Merck, Consultant/Speaker's bureau/Advisory activities with: Servier, Novartis, Amgen, E. Czerwinski: None Declared, N. Daizadeh Employee of: Amgen Inc., Stock ownership or royalties of: Amgen Inc., A. Grauer Employee of: Amgen Inc., Stock ownership or royalties of: Amgen Inc., C. Haller Employee of: Amgen Inc., Stock ownership or royalties of: Amgen Inc., M.-A. Krieg: None Declared, C. Libanati Employee of: Amgen Inc., Stock ownership or royalties of: Amgen Inc., Z. Man Grant/Research Support from: Amgen, D. Mellström: None Declared, S. Radominski Grant/Research Support from: Amgen, Pfizer, Roche, BMS, J.-Y. Reginster Grant/Research Support from: Bristol Myers Squibb, Merck Sharp & Dohme, Rottapharm, Teva, Lilly, Novartis, Roche, GlaxoSmithKline, Amgen, Servier, Consultant/Speaker's bureau/ Advisory activities with: Servier, Novartis, Negma, Lilly,Wyeth, Amgen, GlaxoSmithKline, Roche, Merckle, Nycomed, NPS, Theramex, UCB, Merck, Sharpe & Dohme, Rottapharm, IBSA, Genvrier, Teijin, Teva, Ebewee Pharma, Zodiac, Analis, Theramex, Novo-Nordisk, H. Resch: None Declared, J. A. Román Grant/Research Support from: Roche, Pharma, C. Roux Grant/Research Support from: Amgen, MSD, Novartis, Servier, Roche, Consultant/ Speaker's bureau/Advisory activities with: Amgen, MSD, Novartis, Servier, Roche, S. Cummings Grant/ Research Support from: Amgen, Lilly, Consultant/Speaker's bureau/Advisory activities with: Amgen, Lilly, Novartis, Merck
Resumo:
The aim of ORAMED work package 4 was the optimization of the medical practices in nuclear medicine during the preparation of radiopharmaceuticals and their administration to the patient. During the project a wide campaign of measurements was performed in the nuclear medicine departments of the collaborating hospitals. Such data were intrinsically characterized by a large variability that depended on the procedure, the employed techniques and the operator's habits. That variability could easily hide some important parameter, for example, the effectiveness of the adopted shielding (for syringe and vial) or the effect of the distances from the source. This information is necessary for a valuable optimization purpose of radiation protection. To this end a sensitivity analysis was carried out through Monte Carlo simulations employing voxel models, representing operator's hand during the considered practices. Such analysis allowed understanding at what extent the range of personal dose equivalent evaluated during measurements can be considered intrinsically related to the procedures. Furthermore, with the Monte Carlo simulations it was possible to study the appropriateness of the shielding usually utilized in these practices.
Resumo:
The synthesis of /-L-fucosylated cysteamine, 3-thiopropionic acid, and 3-thioacetic acid derivatives as building blocks for the preparation of S-neofucopeptides is shown. These compounds were used in the synthesis of new thiofucosides derivatives (8, 9, 9, 10, 22, 22, 24, 26) that show affinity towards E- and P-selectins. They constitute a new series of hydrolytically stable and low-molecular-weight mimetics of the natural SLex tetrasaccharide.
Resumo:
The transition between hospital and community is an interface at high risk for medication. "The Association of Family Doctors" committee in the canton of Vaud (MFVaud), together with community pharmacists' and Homecare representatives, have begun to consider the following improvements: fast and co-ordinated care providers' information; arrangements for family doctors appointments as soon as possible; awareness and education for interprofessional collaboration; more secured preparation of pill boxes; development of interprofessional means such as medication use reviews and reconciliations. In the opinion of all the experts, there is an urgent public health need to act in an interprofessional manner, even if the solutions required (especially change in professional culture and technologies) are not immediate.
Resumo:
Peter Karlson and Martin Lüscher used the term pheromone for the first time in 1959 to describe chemicals used for intra-species communication. Pheromones are volatile or non-volatile short-lived molecules secreted and/or contained in biological fluids, such as urine, a liquid known to be a main source of pheromones. Pheromonal communication is implicated in a variety of key animal modalities such as kin interactions, hierarchical organisations and sexual interactions and are consequently directly correlated with the survival of a given species. In mice, the ability to detect pheromones is principally mediated by the vomeronasal organ (VNO), a paired structure located at the base of the nasal cavity, and enclosed in a cartilaginous capsule. Each VNO has a tubular shape with a lumen allowing the contact with the external chemical world. The sensory neuroepithelium is principally composed of vomeronasal bipolar sensory neurons (VSNs). Each VSN extends a single dendrite to the lumen ending in a large dendritic knob bearing up to 100 microvilli implicated in chemical detection. Numerous subpopulations of VSNs are present. They are differentiated by the chemoreceptor they express and thus possibly by the ligand(s) they recognize. Two main vomeronasal receptor families, V1Rs and V2Rs, are composed respectively by 240 and 120 members and are expressed in separate layers of the neuroepithelium. Olfactory receptors (ORs) and formyl peptide receptors (FPRs) are also expressed in VSNs. Whether or not these neuronal subpopulations use the same downstream signalling pathway for sensing pheromones is unknown. Despite a major role played by a calcium-permeable channel (TRPC2) present in the microvilli of mature neurons TRPC2 independent transduction channels have been suggested. Due to the high number of neuronal subpopulations and the peculiar morphology of the organ, pharmacological and physiological investigations of the signalling elements present in the VNO are complex. Here, we present an acute tissue slice preparation of the mouse VNO for performing calcium imaging investigations. This physiological approach allows observations, in the natural environment of a living tissue, of general or individual subpopulations of VSNs previously loaded with Fura-2AM, a calcium dye. This method is also convenient for studying any GFP-tagged pheromone receptor and is adaptable for the use of other fluorescent calcium probes. As an example, we use here a VG mouse line, in which the translation of the pheromone V1rb2 receptor is linked to the expression of GFP by a polycistronic strategy.
Resumo:
Objective: The vascular access steal syndrome is a complication occurring in 1-6% after native arterio-venous (AV) fistulas, often due to huge diameter of the vein. This results in very high flow, which could also be responsible for cardiac overload. The aim of this study is to evaluate the efficiency of a new approach in the treatment of this pathology using open-pore external scaffolding prosthesis.Methods: This a retrospective review of all patients presenting symptomatic high flow after native AV fistula between January 2007 and December 2009 in 3 vascular centers. Pre-operative duplex exam confirmed the diagnosis of high flow. The operation consisted in preparation of the whole fistula, measurement of the flow and section on the venous side. The vein was wrapped with this 6 to 8 mm open-pore external scaffolding prosthesis (ProVena, BBraun, Germany) according to its diameter and to the flow and then sutured. Measurement of the flow was repeated. Patients were followed by duplex exam at 1 week and at 1, 3, 6 and 12 months. Procedural success was defined as complete implantation of the prosthesis and reduction of the flow. Primary outcomes were reduction of the flow and recovery of the symptoms and secondary endpoint was patency of the fistula.Results: During the study period, 14 patients, with a mean age of 65・8 years old, have been operated with this technique.There were 2 native forearmfistulas and 12 on the armwith a mean pre-operative flow of 2600 ml/min (1800-3800). The mode of presentation was pain in 6 patients, neurological disorders in 10 and necrosis in 4. Moreover, 3 patients had cardiac insufficiency due to high flow in the fistula. The procedure was technically successful in 100% of cases. Re-intervention was necessary in 2 patients due to hematoma. Recovery of the initial symptoms occurred in 13 patients (93%). The mean flow reduction was 1200 ml/min (600-2000). In 1 patient, a persistent steal syndrome despite flow reduction to 1400 ml/min resulted in fistula closure 2 months later. At a mean follow-up of 22 months (4-35), all remaining patients (13/14) presented a patent fistula without recurrence.Conclusion: This new approach seems to be safe and effective in the treatment of symptomatic high flow native AV fistulas by significantly reducing the flow and avoiding closure of the vascular access. Longer follow-up with more patients are necessary to evaluate the risk of recurrence.
Resumo:
A previous study has shown the possibility to identify methane (CH4 ) using headspace-GC-MS and quantify it with a stable isotope as internal standard. The main drawback of the GC-MS methods discussed in literature for CH4 measurement is the absence of a specific internal standard necessary to perform quantification. However, it becomes essential to develop a safer method to limit the manipulation of gaseous CH4 and to precisely control the injected amount of gas for spiking and calibration by comparison with external calibration. To avoid the manipulation of a stable isotope-labeled gas, we have chosen to generate a labeled gas as an internal standard in a vial on the basis of the formation of CH4 by the reaction of Grignard reagent methylmagnesium chloride with deuterated water. This method allows precise measurement of CH4 concentrations in gaseous sample as well as in a solid or a liquid sample after a thermodesorption step in a headspace vial. A full accuracy profile validation of this method is then presented.
Resumo:
Background/Purpose: Denosumab (DMAb) is an approved therapy for the treatment of postmenopausal women with osteoporosis at increased risk for fracture. A favorable risk/benefit profile was demonstrated in the pivotal, 3-year FREEDOM trial (Cummings et al NEJM 2009). The open-label, active-treatment FREEDOM Extension study is investigating the efficacy and safety of DMAb for up to 10 years. The Extension trial enrolled women who had received DMAb or placebo in FREEDOM and provides an opportunity to evaluate the long-term efficacy and safety of continuous DMAb treatment (long-term group), and to replicate the DMAb findings observed in FREEDOM (cross-over group). Here, we report the results from the first 3 years of the Extension, representing up to 6 continuous years of DMAb exposure. Methods: During the Extension, each woman is scheduled to receive 60 mg DMAb every 6 months and supplemental calcium and vitamin D daily. For the analyses reported here, women from the FREEDOM DMAb group received 3 more years of DMAb for a total of 6 years of exposure (long-term group) and women from the FREEDOM placebo group received 3 years of DMAb exposure (cross-over group). Results: Of the 5928 women eligible for the Extension, 4550 (77%) enrolled (N_2343 long-term; N_2207 cross-over). In the long-term group, further significant mean increases in bone mineral density (BMD) occurred 4044 for cumulative 6-year gains of 15.2% at the lumbar spine and 7.5% at the total hip (Figure). During the first 3 years of DMAb treatment during the Extension, the cross-over group had significant mean gains in BMD at the lumbar spine (9.4%) and total hip (4.8%), similar to those observed in the long-term DMAb group during the first 3 years of FREEDOM (lumbar spine, 10.1%; total hip, 5.7%). Serum CTX was rapidly and similarly reduced after the 1st (cross-over) or 7th (long-term) DMAb dose with the characteristic attenuation observed at the end of the dosing period. In the cross-over group, yearly incidences of new vertebral and nonvertebral fractures were lower than in the FREEDOM placebo group. Fracture incidence remained low in the long-term group. Incidences of adverse events (AEs) and serious AEs did not increase over time with DMAb treatment. There were 2 subjects with AEs adjudicated to ONJ in the cross-over group and 2 in the long-term group. Both cases in the cross-over group healed completely and without further complications; 1 of these subjects continues to receive DMAb. Both women in the long-term group continue to be followed. No atypical femur fractures have been observed to date. Figure. Percent changes in bone mineral density during FREEDOM and the Extension Conclusion: DMAb treatment for 6 continuous years (long-term group) remained well tolerated, maintained reduced bone turnover, and continued to significantly increase BMD. Fracture incidence remained low. DMAb treatment for 3 years in the cross-over group reproduced the original observations in FREEDOM
Resumo:
The urinary steroid profile is constituted by anabolic androgenic steroids, including testosterone and its relatives, that are extensively metabolized into phase II sulfated or glucuronidated steroids. The use of liquid chromatography coupled to mass spectrometry (LC-MS) is an issue for the direct analysis of conjugated steroids, which can be used as urinary markers of exogenous steroid administration in doping analysis, without hydrolysis of the conjugated moiety. In this study, a sensitive and selective ultra high-pressure liquid chromatography coupled to quadrupole time-of-flight mass spectrometer (UHPLC-QTOF-MS) method was developed to quantify major urinary metabolites simultaneously after testosterone intake. The sample preparation of the urine (1 mL) was performed by solid-phase extraction on Oasis HLB sorbent using a 96-well plate format. The conjugated steroids were analyzed by UHPLC-QTOF-MS(E) with a single-gradient elution of 36 min (including re-equilibration time) in the negative electrospray ionization mode. MS(E) analysis involved parallel alternating acquisitions of both low- and high-collision energy functions. The method was validated and applied to samples collected from a clinical study performed with a group of healthy human volunteers who had taken testosterone, which were compared with samples from a placebo group. Quantitative results were also compared to GC-MS and LC-MS/MS measurements, and the correlations between data were found appropriate. The acquisition of full mass spectra over the entire mass range with QTOF mass analyzers gives promise of the opportunity to extend the steroid profile to a higher number of conjugated steroids.
Resumo:
Asbestos is an industrial term to describe some fibrous silicate minerals, which belong to the amphiboles or serpentines group. Six minerals are defined as asbestos including: chrysotile (white asbestos), amosite (grunerite, brown asbestos), crocidolite (riebeckite, blue asbestos), anthophyllite, tremolite and actonolite, but only in their fibrous form. In 1973, the IARC (International Agency for Research on Cancer) classified the asbestos minerals as carcinogenic substances (IARC,1973). The Swiss threshold limit (VME) is 0.01 fibre/ml (SUVA, 2007). Asbestos in Switzerland has been prohibited since 1990, but this doesn't mean we are over asbestos. Up to 20'000 tonnes/year of asbestos was imported between the end of WWII and 1990. Today, all this asbestos is still present in buildings renovated or built during that period of time. During restorations, asbestos fibres can be emitted into the air. The quantification of the emission has to be evaluated accurately. To define the exact risk on workers or on the population is quite hard, as many factors must be considered. The methods to detect asbestos in the air or in materials are still being discussed today. Even though the EPA 600 method (EPA, 1993) has proved itself for the analysis of bulk materials, the method for air analysis is more problematic. In Switzerland, the recommended method is VDI 3492 using a scanning electron microscopy (SEM), but we have encountered many identifications problems with this method. For instance, overloaded filters or long-term exposed filters cannot be analysed. This is why the Institute for Work and Health (IST) has adapted the ISO10312 method: ambient air - determination of asbestos fibres - direct-transfer transmission electron microscopy (TEM) method (ISO, 1995). Quality controls have already be done at a French institute (INRS), which validate our practical experiences. The direct-transfer from MEC's filters on TEM's supports (grids) is a delicate part of the preparation for analysis and requires a lot of trials in the laboratory. IST managed to do proper grid preparations after about two years of development. In addition to the preparation of samples, the micro-analysis (EDX), the micro-diffraction and the morphologic analysis (figure 1.a-c) are also to be mastered. Theses are the three elements, which prove the different features of asbestos identification. The SEM isn't able to associate those three analyses. The TEM is also able to make the difference between artificial and natural fibres that have very similar chemical compositions as well as differentiate types of asbestos. Finally the experiments concluded by IST show that TEM is the best method to quantify and identify asbestos in the air.