Taking care of the most vulnerable : a descriptive study of patients with 12 attendances or more at a Swiss university hospital emergency department in 2009

Introduction: Patients who repeatedly attend the Emergency Department (ED) often have a distinct and complex vulnerability profile that includes poor somatic, psychological, and social indicators. This profile has an impact on the patients' well-being as well as on hospital costs. The objective of the study was to specify the characteristics of hyper users (HU) and explore the connection with ED care and hospital costs. Methods: The study sample comprised all adult patients with 12 or more attendances at the ED of the Lausanne University Hospital in 2009. The data were collected by retrospectively searching internal databases to identify the patients concerned and then analysing the profiles of these patients. Information gathered included demographic, somatic, psychological, at-risk behaviour, and social indicators, and health system consumption including costs. Results: In 2009, 23 patients (0.1%) attended 12 times or more (425 attendances, 0.8%). The average age was about 43 years, 60.9% were female, and 47.8% single. Of these 95.7% had basic insurance, 87.0% had a general practitioner, and 30.4% were under legal guardianship. The majority attended in the evening or at night (67.1%), and almost one quarter of these attendances resulted in inpatient treatment (24.0%). Most HU had attended the ED in previous years too (95.7% in 2008). The most prevalent diagnoses concerned 'mental disorders' (87.0%). About 30.4% of patients had attempted suicide (all were female patients). Other frequent diagnoses concerned 'trauma' (65.2%), and the 'digestive' and the 'nervous system' (each 56.5%). At-risk behaviour such as severe alcohol consumption (34.8%), or excessive use of medicines (26.1%) was very frequent, and some patients used illicit drugs (21.7%). There was only a weak association between the number of ED attendances and the resulting costs. However, a reduction of one outpatient visit per patient would have decreased ED outpatient costs by 8.5%. Conclusions: HU often have a particularly vulnerable profile. Mental problems are prevalent among them, as are at-risk behaviour and severe somatic conditions. The complexity of the patients' profiles demands specific care that cannot be guaranteed within an everyday ED routine. The use of an interdisciplinary case management team might be a promising approach in diminishing the number of attendances and the associated costs, although the profiles of HU are such that they probably cannot completely give up ED attendance.

Expression of E-Selectin and Vascular Cell Adhesion Molecule-1 in So-Called 'Negative' Appendices: First Results to Support the Pathological Diagnosis in Borderline Cases.

Background: Since the rate of histologically 'negative' appendices still ranges between 15 and 20%, appendicitis in 'borderline' cases remains a challenging disease. As previously described, cell adhesion molecule expression correlates with different stages of appendicitis. Therefore, it was of interest to determine whether the 'negative' appendix correlated with the absence of E-selectin or vascular cell adhesion molecule-1 (VCAM-1). Methods: Nineteen grossly normal appendices from a series of 120 appendectomy specimens from patients with suspected appendicitis were analysed in frozen sections for the expression of E-selectin and VCAM-1. As control, 5 normal appendices were stained. Results: This study showed a coexpression of E-selectin and VCAM-1 in endothelial cells in early and recurrent appendicitis. In patients with symptoms for less than 6 h, only E-selectin was detected. Cases with fibrosis and luminal obliteration were only positive for VCAM-1. In cases of early appendicitis with symptoms of less than 6 h duration, a discordance between histological and immunohistochemical results was found. Conclusions: This report indicates that E-selectin and VCAM-1 expression could be useful parameters in the diagnosis of appendicitis in borderline cases.

A design science approach to support the assessment of disruptive technology : the Swiss mobile payment case

Abstract In this thesis we present the design of a systematic integrated computer-based approach for detecting potential disruptions from an industry perspective. Following the design science paradigm, we iteratively develop several multi-actor multi-criteria artifacts dedicated to environment scanning. The contributions of this thesis are both theoretical and practical. We demonstrate the successful use of multi-criteria decision-making methods for technology foresight. Furthermore, we illustrate the design of our artifacts using build and-evaluate loops supported with a field study of the Swiss mobile payment industry. To increase the relevance of this study, we systematically interview key Swiss experts for each design iteration. As a result, our research provides a realistic picture of the current situation in the Swiss mobile payment market and reveals previously undiscovered weak signals for future trends. Finally, we suggest a generic design process for environment scanning.

Data Envelopment Analysis and non-discretionary inputs : How to select the most suitable model using multi-criteria decision analysis

Within Data Envelopment Analysis, several alternative models allow for an environmental adjustment. The majority of them deliver divergent results. Decision makers face the difficult task of selecting the most suitable model. This study is performed to overcome this difficulty. By doing so, it fills a research gap. First, a two-step web-based survey is conducted. It aims (1) to identify the selection criteria, (2) to prioritize and weight the selection criteria with respect to the goal of selecting the most suitable model and (3) to collect the preferences about which model is preferable to fulfil each selection criterion. Second, Analytic Hierarchy Process is used to quantify the preferences expressed in the survey. Results show that the understandability, the applicability and the acceptability of the alternative models are valid selection criteria. The selection of the most suitable model depends on the preferences of the decision makers with regards to these criteria.

Challenges and threats to implementing the fight against doping in sport

Prominent doping cases in certain sports have recently raised public awareness of doping and reinforced the perception that doping is widespread. Efforts to deal with doping in sport have intensified in recent years, yet the general public believes that the 'cheaters' are ahead of the testers. Therefore, there is an urgent need to change the antidoping strategy. For example, the increase in the number of individual drug tests conducted between 2005 and 2012 was approximately 90 000 and equivalent to an increase of about 50%, yet the number of adverse analytical findings remained broadly the same. There is also a strikingly different prevalence of doping substances and methods in sports such as a 0.03% prevalence of anabolic steroids in football compared to 0.4% in the overall WADA statistics. Future efforts in the fight against doping should therefore be more heavily based on preventative strategies such as education and on the analysis of data and forensic intelligence and also on the experiences of relevant stakeholders such as the national antidoping organisations, the laboratories, athletes or team physicians and related biomedical support staff. This strategy is essential to instigate the change needed to more effectively fight doping in sport.

Validation and performance comparison of two carbon isotope ratio methods to control the misuse of androgens in humans.

Carbon isotope ratio of androgens in urine specimens is routinely determined to exclude an abuse of testosterone or testosterone prohormones by athletes. Increasing application of gas chromatography/combustion/isotope ratio mass spectrometry (GC/C/IRMS) in the last years for target and systematic investigations on samples has resulted in the demand for rapid sample throughput as well as high selectivity in the extraction process particularly in the case of conspicuous samples. For that purpose, we present herein the complimentary use of an SPE-based assay and an HPLC fractionation method as a two-stage strategy for the isolation of testosterone metabolites and endogenous reference compounds prior to GC/C/IRMS analyses. Assays validation demonstrated acceptable performance in terms of intermediate precision (range: 0.1-0.4 per thousand) and Bland-Altman analyses revealed no significant bias (0.2 per thousand). For further validation of this two-stage analyses strategy, all the specimens (n=124) collected during a major sport event were processed.

Stratégies de communication au service de la formation: quelques outils pratiques [Effective communication strategies to frame the trainer-trainee dialogue in the clinical setting].

Communication between trainer and trainee plays a central role in teaching and learning in the clinical environment. There are various strategies to frame the dialogue between trainee and trainer. These strategies allow trainers to be more effective in their supervision, which is important in our busy clinical environment. Communication strategies are well adapted to both in- and out-patient settings, to both under- and postgraduate contexts. This article presents three strategies that we think are particularly useful. They are meant to give feedback, to ask questions and to present a case.

"I'll look it up on the Web first": barriers and overcoming barriers to consult for sexual dysfunction among young men.

QUESTIONS UNDER STUDY: Our aim was to identify the barriers young men face to consult a health professional when they encounter sexual dysfunctions and where they turn to, if so, for answers. METHODS: We conducted an exploratory qualitative research including 12 young men aged 16-20 years old seen in two focus groups. Discussions were triggered through vignettes about sexual dysfunction. RESULTS: Young men preferred not to talk about sexual dysfunction problems with anyone and to solve them alone as it is considered an intimate and embarrassing subject which can negatively impact their masculinity. Confidentiality appeared to be the most important criterion in disclosing an intimate subject to a health professional. Participants raised the problem of males' accessibility to services and lack of reason to consult. Two criteria to address the problem were if it was long-lasting or considered as physical. The Internet was unanimously considered as an initial solution to solve a problem, which could guide them to a face-to-face consultation if necessary. CONCLUSIONS: Results suggest that Internet-based tools should be developed to become an easy access door to sexual health services for young men. Wherever they consult and for whatever problem, sexual health must be on the agenda.

The ubiquitin-proteasome system in prostate cancer and its transition to castration resistance.

Prostate cancer is the most common carcinoma in the male population. In its initial stage, the disease is androgen-dependent and responds therapeutically to androgen deprivation treatment but it usually progresses after a few years to an androgen-independent phase that is refractory to hormonal manipulations. The proteasome is a multi-unit protease system that regulates the abundance and function of a significant number of cell proteins, and its inhibition results in cancer cell growth inhibition and apoptosis and is already exploited in the clinic with the use of proteasome inhibitor bortezomib in multiple myeloma. In order to be recognized by the proteasome, a target protein needs to be linked to a chain of the small protein ubiquitin. In this paper, we review the role of ubiquitin-proteasome system (UPS) in androgen receptor-dependent transcription as well as in the castration resistant stage of the disease, and we discuss therapeutic opportunities that UPS inhibition offers in prostate cancer.

Anti-tumour effect of monoclonal antibodies against selected antigens expressed by B-cells in Chronic Lymphocytic Leukaemia : strategies to enhance the efficacy of immunotherapy

Résumé : Les anticorps monoclonaux ont une place de plus en plus prépondérante dans le traitement des lymphomes et leucémies. Dans cette étude, trois anticorps monoclonaux murins, dirigés contre les antigènes CDS, CD71 et HLA-DR exprimés à la surface des cellules de leucémies lymphoïdes chroniques (LLC), ont été évalués. In vitro, les anticorps radiomarqués ont montrés des bonnes liaisons spécifiques sur les différentes cellules cibles. L'anti-CD71 inhibait la prolifération de la plupart des lignées cellulaires testées avec une accumulation des cellules en phase S précoce du cycle cellulaire. L'anti-HLA-DR inhibait aussi la prolifération des lignées leucémique JOK1-5.3 et lymphoïde Daudi. Cette inhibition était associée à une agrégation des cellules. Aucune induction d'apoptose n'a pu être clairement observée avec ces anticorps. L'anti-CD5 n'a montré aucun effet d'inhibition de croissance in vitro. In vivo, l'injection des anticorps individuellement augmentait significativement la survie médiane de souris SCID greffées avec des cellules JOK1-5.3 en i.p. De plus, l'anticorps antiCD5 combiné à l'anti-HLA-DR ou l'anti-CD71, sous certaines conditions, inhibait complètement le développement tumoral dans la quasi totalité des souris traitées avec une augmentation significative de l'efficacité comparée aux anticorps seuls. L'augmentation de l'efficacité thérapeutique des anticorps monoclonaux par les cytokines, dont l'IL-2, a déjà été montrée dans la littérature. Au regard du meilleur comportement de l'IL-2 sous la forme complexée à un anticorps anti-IL-2, nous avons évalué l'efficacité de l'IL-2/anti-IL-2 seul ou combinés au rituximab chez différents modèles tumoraux s.c. (BL60.2, Daudi, Ramos) ou i.p. (JOK15.3) de souris SCID. Le complexe IL-2/anti-IL-2 a montré un effet anti-tumoral dans les souris greffées avec BL60.2 et Daudi. Le traitement IL-2/anti-IL-2 combiné au rituximab a montré une efficacité accrue chez des souris avec BL60.2 par rapport au rituximab seul. En revanche, nous n'avons pas observé de différence avec IL-2/anti-IL-2 seul.Aussi, nous avons évalué l'utilisation de l'agent couplant tri-fonctionnel TMEA pour produire des anticorps bispecifiques. Les expériences préliminaires avec les anticorps rituximab et herceptine, ont mis en évidence sur gel SDS-Page la formation de dimers (~100kDa) et de trimers (~150kDa). Les anticorps bispecifiques sont composés d'un fragment Fab' d'une spécificité et de un ou deux fragments Fab' de l'autre spécificité permettant de moduler la capacité de liaison. Nous avons enfin montré qu'une construction anti-CD5/anti-CD20 était capable de se lier indépendamment ou simultanément à ses antigènes cibles. En conclusion, ce travail a montré l'efficacité thérapeutique des trois anticorps monoclonaux étudiés dans un model de LLC in vivo, et plus particulièrement l'intérêt de certaines combinaisons. D'autre part, nous avons montré l'efficacité anti-tumorale du complexe IL-2/anti-IL-2 in vivo. Des études futures devront permettre de définir un régime favorable pour augmenter l'efficacité de la thérapie avec les anticorps monoclonaux. Enfin, nous avons montré la faisabilité d'utiliser l'agent couplant TMEA pour produire des anticorps bispécifiques fonctionnels.Abstract : Monoclonal antibody (mAb) therapy has become an integral part in different treatments of lymphomas and leukaemias. In this study, we describe three murine mAbs directed against the CD5, CD71 and HLA-DR antigens expressed on chronic lymphocytic leukaemia cells (CLL). In vitro, radiolabeled purified mAbs showed good specific binding on live target cells. Anti-CD71 mAb inhibited proliferation of most cell lines with an accumulation of responding cells in early S-phase of the cell cycle, but without induction of apoptosis. Anti-HLA-DR mAb showed proliferation inhibition of leukaemia JOK1-5.3 and lymphoid Daudi cells, associated with cell aggregation, but again no specific sign of apoptosis was observed. Anti-CD5 mAb did not show any growth inhibitory effect in vitro. In vivo, in a model of SCID mice grafted i.p. with JOK1-5.3 cells, injection of individual mAbs induced significant prolongation of median survival, up to complete inhibition of tumour growth in some mice. Antibody combination of anti-CD5 with anti-HLA-DR or anti-CD71, evaluated in an early treatment, completely inhibited tumour growth in most mice, with a significant efficacy enhancement as compared to mAb used as single agents. Previous reports described the improved efficacy of mAb therapy when combined with cytokines such as IL-2. Relying further on the improved efficacy of IL-2 when administered as an immune complex with anti-IL-2 mAb, we evaluated the anti-tumour effect of the IL-2/anti-IL-2 complex alone or combined with rituximab in subcutaneous (BL60.2, Daudi, Ramos) or i.p. (JOK1-5.3) tumour models in SCID mice. The IL-2/anti-IL-2 complex demonstrated an anti-tumour effect in BL60.2 and Daudi grafted SCID mice. Combination of IL-2/anti-IL-2 treatment with rituximab showed increased efficacy as compared to rituximab alone in BL60.2 grafted mice. However, no difference was observed with IL-2/anti-IL-2 complex alone in these experiments. Finally, we evaluated the feasibility of producing bispecific antibodies (bsAbs) using a trifunctional coupling agent, called TMEA. In preliminary experiments coupling rituximab with herceptine Fab' fragments we obtained the formation of dimers (~100kDa) and trimers (~150kDa) as observed on SDS-Page gel. This method allowed us to produce bsAb with one Fab' fragments of one specificity and one or two Fab' fragments of the second specificity. An anti-CD5/anti-CD20 bsAb was shown to bind targeted antigen either independently or simultaneously. In conclusion, these data show that the three mAbs were all able to induce significant growth inhibition of the JOK1-5.3 cell line in vivo, and efficacy was enhanced when used in combination. IL2/anti-IL-2 complex displayed anti-tumour efficacy in vivo. Further evaluation is necessary to define the most favourable combination to improve mAb therapy. BsAb were produced using the tri-functional agent allowing antibody fragments with relatively good binding. The poor yield obtained with such chemical couplings limited the use of these constructs in preclinical experiments.

The role of the ubiquitin proteasome system in Alzheimer's disease.

Today, Alzheimer's disease (AD) is one of the most important age-related neurodegenerative diseases, but its etiology remains still unknown. Since the discovery that the hallmark structures of this disease i.e. the formation of amyloid fibers could be the product of ubiquitin-mediated protein degradation defects, it has become clear that the ubiquitin-proteasome system (UPS), usually essential for protein repair, turnover and degradation, is perturbed in this disease. Different aspects of normal and pathological aging are discussed with respect to protein repair and degradation via the UPS, as well as consequences of a deficit in the UPS in AD. Selective protein oxidation may cause protein damage, or protein mutations may induce a dysfunction of the proteasome. Such events eventually lead to activation of cell death pathways and to an aberrant aggregation or incorporation of ubiquitinated proteins into hallmark structures. Aggresome formation is also observed in other neurodegenerative diseases, suggesting that an activation of similar mechanisms must occur in neurodegeneration as a basic phenomenon. It is essential to discuss therapeutic ways to investigate the UPS dysfunction in the human brain and to identify specific targets to hold or stop cell decay.

TACI, unlike BAFF-R, is solely activated by oligomeric BAFF and APRIL to support survival of activated B cells and plasmablasts.

The cytokine BAFF binds to the receptors TACI, BCMA, and BAFF-R on B cells, whereas APRIL binds to TACI and BCMA only. The signaling properties of soluble trimeric BAFF (BAFF 3-mer) were compared with those of higher-order BAFF oligomers. All forms of BAFF bound BAFF-R and TACI, and elicited BAFF-R-dependent signals in primary B cells. In contrast, signaling through TACI in mature B cells or plasmablasts was only achieved by higher-order BAFF and APRIL oligomers, all of which were also po-tent activators of a multimerization-dependent reporter signaling pathway. These results indicate that, although BAFF-R and TACI can provide B cells with similar signals, only BAFF-R, but not TACI, can respond to soluble BAFF 3-mer, which is the main form of BAFF found in circulation. BAFF 60-mer, an efficient TACI agonist, was also detected in plasma of BAFF transgenic and nontransgenic mice and was more than 100-fold more active than BAFF 3-mer for the activation of multimerization-dependent signals. TACI supported survival of activated B cells and plasmablasts in vitro, providing a rational basis to explain the immunoglobulin deficiency reported in TACI-deficient persons.

Assessment of the occurrence of nanoparticles in Swiss industry and evaluation of the appropriatenesss of the measurement devices to determine the workforce exposure

Abstract : The occupational health risk involved with handling nanoparticles is the probability that a worker will experience an adverse health effect: this is calculated as a function of the worker's exposure relative to the potential biological hazard of the material. Addressing the risks of nanoparticles requires therefore knowledge on occupational exposure and the release of nanoparticles into the environment as well as toxicological data. However, information on exposure is currently not systematically collected; therefore this risk assessment lacks quantitative data. This thesis aimed at, first creating the fundamental data necessary for a quantitative assessment and, second, evaluating methods to measure the occupational nanoparticle exposure. The first goal was to determine what is being used where in Swiss industries. This was followed by an evaluation of the adequacy of existing measurement methods to assess workplace nanopaiticle exposure to complex size distributions and concentration gradients. The study was conceived as a series of methodological evaluations aimed at better understanding nanoparticle measurement devices and methods. lt focused on inhalation exposure to airborne particles, as respiration is considered to be the most important entrance pathway for nanoparticles in the body in terms of risk. The targeted survey (pilot study) was conducted as a feasibility study for a later nationwide survey on the handling of nanoparticles and the applications of specific protection means in industry. The study consisted of targeted phone interviews with health and safety officers of Swiss companies that were believed to use or produce nanoparticles. This was followed by a representative survey on the level of nanoparticle usage in Switzerland. lt was designed based on the results of the pilot study. The study was conducted among a representative selection of clients of the Swiss National Accident Insurance Fund (SUVA), covering about 85% of Swiss production companies. The third part of this thesis focused on the methods to measure nanoparticles. Several pre- studies were conducted studying the limits of commonly used measurement devices in the presence of nanoparticle agglomerates, This focus was chosen, because several discussions with users and producers of the measurement devices raised questions about their accuracy measuring nanoparticle agglomerates and because, at the same time, the two survey studies revealed that such powders are frequently used in industry. The first preparatory experiment focused on the accuracy of the scanning mobility particle sizer (SMPS), which showed an improbable size distribution when measuring powders of nanoparticle agglomerates. Furthermore, the thesis includes a series of smaller experiments that took a closer look at problems encountered with other measurement devices in the presence of nanoparticle agglomerates: condensation particle counters (CPC), portable aerosol spectrometer (PAS) a device to estimate the aerodynamic diameter, as well as diffusion size classifiers. Some initial feasibility tests for the efficiency of filter based sampling and subsequent counting of carbon nanotubes (CNT) were conducted last. The pilot study provided a detailed picture of the types and amounts of nanoparticles used and the knowledge of the health and safety experts in the companies. Considerable maximal quantities (> l'000 kg/year per company) of Ag, Al-Ox, Fe-Ox, SiO2, TiO2, and ZnO (mainly first generation particles) were declared by the contacted Swiss companies, The median quantity of handled nanoparticles, however, was 100 kg/year. The representative survey was conducted by contacting by post mail a representative selection of l '626 SUVA-clients (Swiss Accident Insurance Fund). It allowed estimation of the number of companies and workers dealing with nanoparticles in Switzerland. The extrapolation from the surveyed companies to all companies of the Swiss production sector suggested that l'309 workers (95%-confidence interval l'073 to l'545) of the Swiss production sector are potentially exposed to nanoparticles in 586 companies (145 to l'027). These numbers correspond to 0.08% (0.06% to 0.09%) of all workers and to 0.6% (0.2% to 1.1%) of companies in the Swiss production sector. To measure airborne concentrations of sub micrometre-sized particles, a few well known methods exist. However, it was unclear how well the different instruments perform in the presence of the often quite large agglomerates of nanostructured materials. The evaluation of devices and methods focused on nanoparticle agglomerate powders. lt allowed the identification of the following potential sources of inaccurate measurements at workplaces with considerable high concentrations of airborne agglomerates: - A standard SMPS showed bi-modal particle size distributions when measuring large nanoparticle agglomerates. - Differences in the range of a factor of a thousand were shown between diffusion size classifiers and CPC/SMPS. - The comparison between CPC/SMPS and portable aerosol Spectrometer (PAS) was much better, but depending on the concentration, size or type of the powders measured, the differences were still of a high order of magnitude - Specific difficulties and uncertainties in the assessment of workplaces were identified: the background particles can interact with particles created by a process, which make the handling of background concentration difficult. - Electric motors produce high numbers of nanoparticles and confound the measurement of the process-related exposure. Conclusion: The surveys showed that nanoparticles applications exist in many industrial sectors in Switzerland and that some companies already use high quantities of them. The representative survey demonstrated a low prevalence of nanoparticle usage in most branches of the Swiss industry and led to the conclusion that the introduction of applications using nanoparticles (especially outside industrial chemistry) is only beginning. Even though the number of potentially exposed workers was reportedly rather small, it nevertheless underscores the need for exposure assessments. Understanding exposure and how to measure it correctly is very important because the potential health effects of nanornaterials are not yet fully understood. The evaluation showed that many devices and methods of measuring nanoparticles need to be validated for nanoparticles agglomerates before large exposure assessment studies can begin. Zusammenfassung : Das Gesundheitsrisiko von Nanopartikel am Arbeitsplatz ist die Wahrscheinlichkeit dass ein Arbeitnehmer einen möglichen Gesundheitsschaden erleidet wenn er diesem Stoff ausgesetzt ist: sie wird gewöhnlich als Produkt von Schaden mal Exposition gerechnet. Für eine gründliche Abklärung möglicher Risiken von Nanomaterialien müssen also auf der einen Seite Informationen über die Freisetzung von solchen Materialien in die Umwelt vorhanden sein und auf der anderen Seite solche über die Exposition von Arbeitnehmenden. Viele dieser Informationen werden heute noch nicht systematisch gesarnmelt und felilen daher für Risikoanalysen, Die Doktorarbeit hatte als Ziel, die Grundlagen zu schaffen für eine quantitative Schatzung der Exposition gegenüber Nanopartikel am Arbeitsplatz und die Methoden zu evaluieren die zur Messung einer solchen Exposition nötig sind. Die Studie sollte untersuchen, in welchem Ausmass Nanopartikel bereits in der Schweizer Industrie eingesetzt werden, wie viele Arbeitnehrner damit potentiel] in Kontakt komrrien ob die Messtechnologie für die nötigen Arbeitsplatzbelastungsmessungen bereits genügt, Die Studie folcussierte dabei auf Exposition gegenüber luftgetragenen Partikel, weil die Atmung als Haupteintrittspforte iïlr Partikel in den Körper angesehen wird. Die Doktorarbeit besteht baut auf drei Phasen auf eine qualitative Umfrage (Pilotstudie), eine repräsentative, schweizerische Umfrage und mehrere technische Stndien welche dem spezitischen Verständnis der Mëglichkeiten und Grenzen einzelner Messgeräte und - teclmikeri dienen. Die qualitative Telephonumfrage wurde durchgeführt als Vorstudie zu einer nationalen und repräsentativen Umfrage in der Schweizer Industrie. Sie zielte auf Informationen ab zum Vorkommen von Nanopartikeln, und den angewendeten Schutzmassnahmen. Die Studie bestand aus gezielten Telefoninterviews mit Arbeit- und Gesundheitsfachpersonen von Schweizer Unternehmen. Die Untemehmen wurden aufgrund von offentlich zugànglichen lnformationen ausgewählt die darauf hinwiesen, dass sie mit Nanopartikeln umgehen. Der zweite Teil der Dolctorarbeit war die repräsentative Studie zur Evalniernng der Verbreitnng von Nanopaitikelanwendungen in der Schweizer lndustrie. Die Studie baute auf lnformationen der Pilotstudie auf und wurde mit einer repräsentativen Selektion von Firmen der Schweizerischen Unfall Versicherungsanstalt (SUVA) durchgeüihxt. Die Mehrheit der Schweizerischen Unternehmen im lndustrieselctor wurde damit abgedeckt. Der dritte Teil der Doktorarbeit fokussierte auf die Methodik zur Messung von Nanopartikeln. Mehrere Vorstudien wurden dnrchgefîihrt, um die Grenzen von oft eingesetzten Nanopartikelmessgeräten auszuloten, wenn sie grösseren Mengen von Nanopartikel Agglomeraten ausgesetzt messen sollen. Dieser F okns wurde ans zwei Gründen gewählt: weil mehrere Dislcussionen rnit Anwendem und auch dem Produzent der Messgeràte dort eine Schwachstelle vermuten liessen, welche Zweifel an der Genauigkeit der Messgeräte aufkommen liessen und weil in den zwei Umfragestudien ein häufiges Vorkommen von solchen Nanopartikel-Agglomeraten aufgezeigt wurde. i Als erstes widmete sich eine Vorstndie der Genauigkeit des Scanning Mobility Particle Sizer (SMPS). Dieses Messgerät zeigte in Präsenz von Nanopartikel Agglorneraten unsinnige bimodale Partikelgrössenverteilung an. Eine Serie von kurzen Experimenten folgte, welche sich auf andere Messgeräte und deren Probleme beim Messen von Nanopartikel-Agglomeraten konzentrierten. Der Condensation Particle Counter (CPC), der portable aerosol spectrometer (PAS), ein Gerät zur Schàtzung des aerodynamischen Durchniessers von Teilchen, sowie der Diffusion Size Classifier wurden getestet. Einige erste Machbarkeitstests zur Ermittlnng der Effizienz von tilterbasierter Messung von luftgetragenen Carbon Nanotubes (CNT) wnrden als letztes durchgeiührt. Die Pilotstudie hat ein detailliiertes Bild der Typen und Mengen von genutzten Nanopartikel in Schweizer Unternehmen geliefert, und hat den Stand des Wissens der interviewten Gesundheitsschntz und Sicherheitsfachleute aufgezeigt. Folgende Typen von Nanopaitikeln wurden von den kontaktierten Firmen als Maximalmengen angegeben (> 1'000 kg pro Jahr / Unternehrnen): Ag, Al-Ox, Fe-Ox, SiO2, TiO2, und ZnO (hauptsächlich Nanopartikel der ersten Generation). Die Quantitäten von eingesetzten Nanopartikeln waren stark verschieden mit einem ein Median von 100 kg pro Jahr. ln der quantitativen Fragebogenstudie wurden l'626 Unternehmen brieflich kontaktiert; allesamt Klienten der Schweizerischen Unfallversicherringsanstalt (SUVA). Die Resultate der Umfrage erlaubten eine Abschätzung der Anzahl von Unternehmen und Arbeiter, welche Nanopartikel in der Schweiz anwenden. Die Hochrechnung auf den Schweizer lndnstriesektor hat folgendes Bild ergeben: ln 586 Unternehmen (95% Vertrauensintervallz 145 bis 1'027 Unternehmen) sind 1'309 Arbeiter potentiell gegenüber Nanopartikel exponiert (95%-Vl: l'073 bis l'545). Diese Zahlen stehen für 0.6% der Schweizer Unternehmen (95%-Vl: 0.2% bis 1.1%) und 0.08% der Arbeiternehmerschaft (95%-V1: 0.06% bis 0.09%). Es gibt einige gut etablierte Technologien um die Luftkonzentration von Submikrometerpartikel zu messen. Es besteht jedoch Zweifel daran, inwiefern sich diese Technologien auch für die Messurrg von künstlich hergestellten Nanopartikeln verwenden lassen. Aus diesem Grund folcussierten die vorbereitenden Studien für die Arbeitsplatzbeurteilnngen auf die Messung von Pulverri, welche Nan0partike1-Agg10merate enthalten. Sie erlaubten die ldentifikation folgender rnöglicher Quellen von fehlerhaften Messungen an Arbeitsplätzen mit erhöhter Luft-K0nzentrati0n von Nanopartikel Agglomeratenz - Ein Standard SMPS zeigte eine unglaubwürdige bimodale Partikelgrössenverteilung wenn er grössere Nan0par'til<e1Agg10merate gemessen hat. - Grosse Unterschiede im Bereich von Faktor tausend wurden festgestellt zwischen einem Diffusion Size Classiîier und einigen CPC (beziehungsweise dem SMPS). - Die Unterschiede zwischen CPC/SMPS und dem PAS waren geringer, aber abhängig von Grosse oder Typ des gemessenen Pulvers waren sie dennoch in der Grössenordnung von einer guten Grössenordnung. - Spezifische Schwierigkeiten und Unsicherheiten im Bereich von Arbeitsplatzmessungen wurden identitiziert: Hintergrundpartikel können mit Partikeln interagieren die während einem Arbeitsprozess freigesetzt werden. Solche Interaktionen erschweren eine korrekte Einbettung der Hintergrunds-Partikel-Konzentration in die Messdaten. - Elektromotoren produzieren grosse Mengen von Nanopartikeln und können so die Messung der prozessbezogenen Exposition stören. Fazit: Die Umfragen zeigten, dass Nanopartikel bereits Realitàt sind in der Schweizer Industrie und dass einige Unternehmen bereits grosse Mengen davon einsetzen. Die repräsentative Umfrage hat diese explosive Nachricht jedoch etwas moderiert, indem sie aufgezeigt hat, dass die Zahl der Unternehmen in der gesamtschweizerischen Industrie relativ gering ist. In den meisten Branchen (vor allem ausserhalb der Chemischen Industrie) wurden wenig oder keine Anwendungen gefunden, was schliessen last, dass die Einführung dieser neuen Technologie erst am Anfang einer Entwicklung steht. Auch wenn die Zahl der potentiell exponierten Arbeiter immer noch relativ gering ist, so unterstreicht die Studie dennoch die Notwendigkeit von Expositionsmessungen an diesen Arbeitsplätzen. Kenntnisse um die Exposition und das Wissen, wie solche Exposition korrekt zu messen, sind sehr wichtig, vor allem weil die möglichen Auswirkungen auf die Gesundheit noch nicht völlig verstanden sind. Die Evaluation einiger Geräte und Methoden zeigte jedoch, dass hier noch Nachholbedarf herrscht. Bevor grössere Mess-Studien durgefîihrt werden können, müssen die Geräte und Methodem für den Einsatz mit Nanopartikel-Agglomeraten validiert werden.