Platinum Electrodeposition in an Ionic Liquid Analogue. Solvent Stability Monitoring

The use of ionic liquid analogues as solvents has increased in order to substitute the aqueous solvents in some applications in which the side reactions are undesirable. However these solvents prepared from the mixture in the eutectic proportion of species establishing hydrogen bonds are susceptible of electrochemical reactions. The study of platinum deposition on vitreous carbon in an ionic liquid analogue (2 urea: choli ne chloride) is presented; the electrochemical study has permitted to interpret the sequence of the metal deposition process and simultaneously to analyze the behavior of the ionic liquid analogue along the process. Reduction reactions of the solvent relat ed both to the electronation of choline and hydrogen formation have been detected. Different substrata have been used in order to test the possibility and the extent of these reactions depending on the nature of material. The results indicate that the feas ible electrochemical window of the substrate/solvent is highly dependent of the kind of substrate; the negative limit is tied by the massive hydrogen reaction, reaction enhanced by the electrocatalytic character of the substrate.

Simple and fast methods based on solid-phase extraction coupled to liquid chromatography with UV detection for the monitoring of caffeine in natural and waste waters as marker of anthropogenic impact

Two concentration methods for fast and routine determination of caffeine (using HPLC-UV detection) in surface, and wastewater are evaluated. Both methods are based on solid-phase extraction (SPE) concentration with octadecyl silica sorbents. A common “offline” SPE procedure shows that quantitative recovery of caffeine is obtained with 2 mL of an elution mixture solvent methanol-water containing at least 60% methanol. The method detection limit is 0.1 μg L−1 when percolating 1 L samples through the cartridge. The development of an “online” SPE method based on a mini-SPE column, containing 100 mg of the same sorbent, directly connected to the HPLC system allows the method detection limit to be decreased to 10 ng L−1 with a sample volume of 100 mL. The “offline” SPE method is applied to the analysis of caffeine in wastewater samples, whereas the “on-line” method is used for analysis in natural waters from streams receiving significant water intakes from local wastewater treatment plants

Development, physical-chemical stability and release studies of four alcohol-free spironolactone suspensions for use in pediatrics

Dissolution studies have become of great significance because, in most cases, drug dissolution is the rate-limiting step in the absorption process. As occurs with solid oral dosage forms, heterogeneous disperse systems (suspensions) could also have some problems with their in vitro dissolution. The objective of this study was to evaluate influence of the excipients on the release of spironolactone from four alcohol free suspensions (pharmaceutical compounding) of spironolactone 5 mg/mL suitable for pediatric use. Also the comparison of the physical and chemical stability of the suspensions stored at 4, 25 and 40 ºC over a 60- day period has been studied. Rheological behavior, particle size, a prediction of long-term physical stability, pH and assay of spironolactone by HPLC were assessed at prefixed times. The dissolution profile of each suspension was determined and compared with that of the commercial tablets. A microbiological study of the best formula was also performed. Chemically, the four spironolactone suspensions were stable for 60 days stored at three temperatures; Suspension IV had optimum pH values and the highest recovery percentage. In terms of physical stability, sedimentation occurred in Suspension IV and flotation of spironolactone in Suspensions I, II and III. Suspension III had the highest viscosity and the slowest drug release. Suspension IV was also microbiologically stable for 60 days. In conclusion, Suspension IV had the best properties and the least suitable form was Suspension III, as its high viscosity made it difficult to achieve homogeneous redispersion, and it had the slowest dissolution profile.

Stability and asymptotic analysis of a fluid-particle interaction model

We are interested in coupled microscopic/macroscopic models describing the evolution of particles dispersed in a fluid. The system consists in a Vlasov-Fokker-Planck equation to describe the microscopic motion of the particles coupled to the Euler equations for a compressible fluid. We investigate dissipative quantities, equilibria and their stability properties and the role of external forces. We also study some asymptotic problems, their equilibria and stability and the derivation of macroscopic two-phase models.

On dictatorship, economic development and stability

This paper aims to account for varying economic performances and political stability under dictatorship. We argue that economic welfare and social order are the contemporary relevant factors of political regimes' stability. Societies with low natural level of social order tend to tolerate predatory behavior from dictators in exchange of a provision of civil peace. The fear of anarchy may explain why populations are locked in the worst dictatorships. In contrast, in societies enjoying a relative natural civil peace, dictatorship is less likely to be predatory because low economic welfare may destabilize it.

Paths to stability for matching markets with couples

We study two-sided matching markets with couples and show that for a natural preference domain for couples, the domain of weakly responsive preferences, stable outcomes can always be reached by means of decentralized decision making. Starting from an arbitrary matching, we construct a path of matchings obtained from `satisfying' blocking coalitions that yields a stable matching. Hence, we establish a generalization of Roth and Vande Vate's (1990) result on path convergence to stability for decentralized singles markets. Furthermore, we show that when stable matchings exist, but preferences are not weakly responsive, for some initial matchings there may not exist any path obtained from `satisfying' blocking coalitions that yields a stable matching.

Optimal technology policy: subsidies versus monitoring

We analyze the optimal technology policy to solve a free-riding problem between the members of a RJV. We assume that when intervening the Government suffers an additional adverse selection problem because it is not able to distinguish the value of the potential innovation. Although subsidies and monitoring may be equivalent policy tools to solve firms' free-riding problem, they imply different social losses if the Government is not able to perfectly distinguish the value of the potential innovation. The supremacy of monitoring tools over subsidies is proved to depend on which type of information the Government is able to obtain about firms' R&D performance.

Candidate stability and voting correspondences

We study the incentives of candidates to enter or to exit elections in order to strategically affect the outcome of a voting correspondence. We extend the results of Dutta, Jackson and Le Breton (2000), who only considered single-valued voting procedures by admitting that the outcomes of voting may consist of sets of candidates. We show that, if candidates form their preferences over sets according to Expected Utility Theory and Bayesian updating, every unanimous and non dictatorial voting correspondence violates candidate stability. When candidates are restricted to use even chance prior distributions, only dictatorial or bidictatorial rules are unanimous and candidate stable. We also analyze the implications of using other extension criteria to define candidate stability that open the door to positive results.

On the stability of cooperation structures

Qin [J. Eco. Th., 1996] recently showed that in a game of endogenous formation of cooperation structure, if the underlying TU-game is superadditive, then the full cooperation structure is stable. In this note, we characterize the class of games that ensure the stability of the full cooperation structure, and show that this class is much larger than that of superadditive TU-games.

Reduction, Linearization and stability of relative equilibria for mechanical systems on riemannian manifolds

Consider a Riemannian manifold equipped with an infinitesimal isometry. For this setup, a unified treatment is provided, solely in the language of Riemannian geometry, of techniques in reduction, linearization, and stability of relative equilibria. In particular, for mechanical control systems, an explicit characterization is given for the manner in which reduction by an infinitesimal isometry, and linearization along a controlled trajectory "commute." As part of the development, relationships are derived between the Jacobi equation of geodesic variation and concepts from reduction theory, such as the curvature of the mechanical connection and the effective potential. As an application of our techniques, fiber and base stability of relative equilibria are studied. The paper also serves as a tutorial of Riemannian geometric methods applicable in the intersection of mechanics and control theory.

Stability and manipulation in representative democracies

This paper is devoted to the analysis of all constitutions equipped with electoral systems involving two step procedures. First, one candidate is elected in every jurisdiction by the electors in that jurisdiction, according to some aggregation procedure. Second, another aggregation procedure collects the names of the jurisdictional winners in order to designate the final winner. It appears that whenever individuals are allowed to change jurisdiction when casting their ballot, they are able to manipulate the result of the election except in very few cases. When imposing a paretian condition on every jurisdictions voting rule, it is shown that, in the case of any finite number of candidates, any two steps voting rule that is not manipulable by movement of the electors necessarily gives to every voter the power of overruling the unanimity on its own. A characterization of the set of these rules is next provided in the case of two candidates.

Optimal monitoring to implement clean technologies when pollution is random

We analyze a model where firms chose a production technology which, together with some random event, determines the final emission level. We consider the coexistence of two alternative technologies: a "clean" technology, and a "dirty" technology. The environmental regulation is based on taxes over reported emissions, and on penalties over unreported emissions. We show that the optimal inspection policy is a cut-off strategy, for several scenarios concerning the observability of the adoption of the clean technology and the cost of adopting it. We also show that the optimal inspection policy induces the firm to adopt the clean technology if the adoption cost is not too high, but the cost levels for which the firm adopts it depend on the scenario.

Stability of periodic solutions obtained via the averaging method for nonsmooth Lipschitz system

"Vegeu el resum a l'inici del document del fitxer adjunt."

On the stability of periodic orbits in Rn

We consider an autonomous differential system in Rn with a periodic orbit and we give a new method for computing the characteristic multipliers associated to it. Our method works when the periodic orbit is given by the transversal intersection of n ¡ 1 codimension one hypersurfaces and is an alternative to the use of the first order variational equations. We apply it to study the stability of the periodic orbits in several examples, including a periodic solution found by Steklov studying the rigid body dynamics.

Terrestrial laser scanning for landslides deformation monitoring

Within last few years a new type of instruments called Terrestrial Laser Scanners (TLS) entered to the commercial market. These devices brought a possibility to obtain completely new type of spatial, three dimensional data describing the object of interest. TLS instruments are generating a type of data that needs a special treatment. Appearance of this technique made possible to monitor deformations of very large objects, like investigated here landslides, with new quality level. This change is visible especially with relation to the size and number of the details that can be observed with this new method. Taking into account this context presented here work is oriented on recognition and characterization of raw data received from the TLS instruments as well as processing phases, tools and techniques to do them. Main objective are definition and recognition of the problems related with usage of the TLS data, characterization of the quality single point generated by TLS, description and investigation of the TLS processing approach for landslides deformation measurements allowing to obtain 3D deformation characteristic and finally validation of the obtained results. The above objectives are based on the bibliography studies and research work followed by several experiments that will prove the conclusions.