The Catalan countries project (1931-1939)

In the evolution of Catalan nationalism, as much politician as cultural, the period of II Spanish Republic (1931-1939) was essential. The obtaining of the Statute of Autonomy (1931-1932) supposed the beginning of a stage of expansion in multiple aspects. One of them were the contacts with the Catalanists nuclei of the rest of the cultural space of Catalan language in which, at that time, it would begin to call Catalan Countries (Balearic Islands, Valencian Country, Andorra, Rosselló, to l'Alguer). On Those Collaborations between cultural organizations, political and particular parties Catalonia always will be the model to follow. The Increasing connections will be visualized on press, as well as on cultural celebrations, policy of parties and Constituent Courts. This evolution will be cut by the Franco victory in the Civil War in 1939.

Model-based diagnosis system: application to constructed wetlands

Report for the scientific sojourn carried out at the Model-based Systems and Qualitative Reasoning Group (Technical University of Munich), from September until December 2005. Constructed wetlands (CWs), or modified natural wetlands, are used all over the world as wastewater treatment systems for small communities because they can provide high treatment efficiency with low energy consumption and low construction, operation and maintenance costs. Their treatment process is very complex because it includes physical, chemical and biological mechanisms like microorganism oxidation, microorganism reduction, filtration, sedimentation and chemical precipitation. Besides, these processes can be influenced by different factors. In order to guarantee the performance of CWs, an operation and maintenance program must be defined for each Wastewater Treatment Plant (WWTP). The main objective of this project is to provide a computer support to the definition of the most appropriate operation and maintenance protocols to guarantee the correct performance of CWs. To reach them, the definition of models which represent the knowledge about CW has been proposed: components involved in the sanitation process, relation among these units and processes to remove pollutants. Horizontal Subsurface Flow CWs are chosen as a case study and the filtration process is selected as first modelling-process application. However, the goal is to represent the process knowledge in such a way that it can be reused for other types of WWTP.

Inequality and a repeated joint project

Agents voluntarily contribute to an infinitely repeated joint project. We investigate the conditions for cooperation to be a renegotiation-proof and coalition-proof equilibrium before examining the influence of output share inequality on the sustainability of cooperation. When shares are not equally distributed, cooperation requires agents to be more patient than under perfect equality. Beyond a certain degree of share inequality, full efficiency cannot be reached without redistribution. This model also explains the coexistence of one cooperating and one free-riding coalition. In this case, increasing inequality can have a positive or negative impact on the aggregate level of effort.

Adaptació del model europeu (EEES) de les assignatures relacionades amb organització i mètodes de treball de la Diplomatura de relacions Laborals

L'adaptació dels estudis a l'Espai Europeu d'Educació Superior (EEES) comporta l'establiment d'un nou paradigma docent centrat en l'estudiant, l'ús d'una nova unitat de valoració de l'activitat acadèmica, el crèdit europeu, i enfortir i repensar l'avaluació de l'aprenentatge. Aquesta adaptació representa una transformació profunda en el paper que juga tant el professor com l'alumne. En aquest context, es fa molt necessari adaptar les metodologies docents, els continguts i les eines d'interacció amb els alumnes. La finalitat d'aquest projecte consisteix en adaptar les assignatures troncals d'Organització i Mètodes de Treball de la Diplomatura de Relacions Laborals a aquest nou entorn. Per a tal fi, a part d'elaborar un pla docent consistent al EEES, també s'han de desenvolupar continguts, eines d'interacció i metodologies d'avaluació que permetin millorar el nivell de formació i el rendiment acadèmic de l'estudiant. Aquest projecte comprèn sis accions específiques per aconseguir-ho: 1) L'elaboració de la guia docent (objectius, capacitats a treballar, continguts, metodologia, avaluació, etc.); 2) L'elaboració del programa d'activitats (on es concreten les activitats d'aprenentatge que l'estudiant ha de dur a terme per assolir els objectius formatius: projectes tutoritzats, estudis de casos , lectures orientades, etc.) 3) Elaboració del material teòric. Aquesta acció té com a objectiu realitzar un llibre bàsic que comprengui la totalitat de la matèria relacionada amb OMT. 4) Elaboració del material pràctic. 5) Creació d'una pàgina web per aquest material. Aquesta web pretén ser un espai de treball comú pels estudiants de Relacions Laborals que cursin assignatures d'OMT a la UAB i la UPF. 6) Realitzar un projecte pilot tutoritzat. Aquesta prova pilot sorgeix arran de converses informals mantingudes amb alumnes de la diplomatura i la coordinadora d'estudis.

Creació i transmissió de coneixement als clústers empresarials: un model de simulació

Projecte de recerca elaborat a partir d’una estada a l’Snider Entrepreneurial Research Center de la Wharton School de la University of Pennsilvanya y, EUA entre juliol i desembre del 2007. L’objectiu d’aquest projecte és estudiar la relació entre les estratègies de gestió del coneixement i les tecnologies de la informació i la comunicació (TIC) en l’evolució de les poblacions d’organitzacions i els seus efectes en els patrons industrials d’aglomeració espacial. Per a això s’adopta una aproximació fonamentada en la utilització d'un model basats en agents per a obtenir hipòtesis significatives i provables sobre l’evolució de les poblacions d’organitzacions al si de clústers geogràfics. El model de simulació incorpora les perspectives i supòsits d’un marc conceptual, l’Espai de la Informació o I-Space. Això permet una conceptualització basada en la informació de l’entorn econòmic que té en compte les seves dimensions espacials i temporals. Mitjançant els paràmetres del model es dóna la possibilitat d’assignar estratègies específiques de gestió del coneixement als diversos agents i de localitzar-los en una posició de l’espai físic. La simulació mostra com l'adopció d'estratègies diverses pel que fa a la gestió del coneixement influeix en l'evolució de les organitzacions i de la seva localització espacial, i que aquesta evolució es veu modificada pel desenvolupament de les TIC. A través de la modelització de dos casos ben coneguts de clústers geogràfics d’alta tecnologia, com són Silicon Valley a Califòrnia i la Route 128 als voltants de Boston, s’estudia la interrelació entre les estratègies de gestió del coneixement adoptades per les empreses i la seva tria de localització espacial, i també com això és afectat per l’evolució de les tecnologies de la informació i de la comunicació (TIC). Els resultats obtinguts generen una sèrie d’hipòtesis de rica potencialitat sobre l’impacte del desenvolupament de les TIC en la dinàmica d’aquests clusters geogràfics. Concretament, es troba que la estructuració del coneixement i l’aglomeració espacial co-evolucionen i que aquesta coevolució es veu significativament alterada pel desenvolupament de les TIC.

Definició d'un procés de gestió de projectes que compleixi amb el model d'avaluació i millora de processos CMM a Nivell 3

Aquest TFC vol fer una presentació del model CMM, presentar un sistema de gestió que cobreixi els seus requeriments a nivell 3, fer una proposta de desplegament i avaluar els costos i els beneficis de l'adopció del nou sistema de gestió per a una empresa dedicada al desenvolupament i el manteniment de programari. El resultat del treball és la memòria en si i els seus annexos.

A genealogical conceptual model using ontologies

Roughly fifteen years ago, the Church of Jesus Christ of Latter-day Saints published a new proposed standard file format. They call it GEDCOM. It was designed to allow different genealogy programs to exchange data.Five years later, in may 2000, appeared the GENTECH Data Modeling Project, with the support of the Federation of Genealogical Societies (FGS) and other American genealogical societies. They attempted to define a genealogical logic data model to facilitate data exchange between different genealogical programs. Although genealogists deal with an enormous variety of data sources, one of the central concepts of this data model was that all genealogical data could be broken down into a series of short, formal genealogical statements. It was something more versatile than only export/import data records on a predefined fields. This project was finally absorbed in 2004 by the National Genealogical Society (NGS).Despite being a genealogical reference in many applications, these models have serious drawbacks to adapt to different cultural and social environments. At the present time we have no formal proposal for a recognized standard to represent the family domain.Here we propose an alternative conceptual model, largely inherited from aforementioned models. The design is intended to overcome their limitations. However, its major innovation lies in applying the ontological paradigm when modeling statements and entities.

Canvi de model econòmic de programari lliure per a serveis webs

Els objectius del TFM consisteixen en canviar el model de negoci de programari lliure per a serveis webs.

Estimation of the viscoelastic properties of vessel walls using a computational model and Doppler ultrasound

Human arteries affected by atherosclerosis are characterized by altered wall viscoelastic properties. The possibility of noninvasively assessing arterial viscoelasticity in vivo would significantly contribute to the early diagnosis and prevention of this disease. This paper presents a noniterative technique to estimate the viscoelastic parameters of a vascular wall Zener model. The approach requires the simultaneous measurement of flow variations and wall displacements, which can be provided by suitable ultrasound Doppler instruments. Viscoelastic parameters are estimated by fitting the theoretical constitutive equations to the experimental measurements using an ARMA parameter approach. The accuracy and sensitivity of the proposed method are tested using reference data generated by numerical simulations of arterial pulsation in which the physiological conditions and the viscoelastic parameters of the model can be suitably varied. The estimated values quantitatively agree with the reference values, showing that the only parameter affected by changing the physiological conditions is viscosity, whose relative error was about 27% even when a poor signal-to-noise ratio is simulated. Finally, the feasibility of the method is illustrated through three measurements made at different flow regimes on a cylindrical vessel phantom, yielding a parameter mean estimation error of 25%.

Biomechanical wall properties of human intracranial aneurysms resected following surgical clipping (IRRAs Project)

Background and purpose: Individual rupture risk assessment of intracranial aneurysms is a major issue in the clinical management of asymptomatic aneurysms. Aneurysm rupture occurs when wall tension exceeds the strength limit of the wall tissue. At present, aneurysmal wall mechanics are poorly understood and thus, risk assessment involving mechanical properties is inexistent. Aneurysm computational hemodynamics studies make the assumption of rigid walls, an arguable simplification. We therefore aim to assess mechanical properties of ruptured and unruptured intracranial aneurysms in order to provide the foundation for future patient-specific aneurysmal risk assessment. This work also challenges some of the currently held hypotheses in computational flow hemodynamics research. Methods: A specific conservation protocol was applied to aneurysmal tissues following clipping and resection in order to preserve their mechanical properties. Sixteen intracranial aneurysms (11 female, 5 male) underwent mechanical uniaxial stress tests under physiological conditions, temperature, and saline isotonic solution. These represented 11 unruptured and 5 ruptured aneurysms. Stress/strain curves were then obtained for each sample, and a fitting algorithm was applied following a 3-parameter (C(10), C(01), C(11)) Mooney-Rivlin hyperelastic model. Each aneurysm was classified according to its biomechanical properties and (un)rupture status.Results: Tissue testing demonstrated three main tissue classes: Soft, Rigid, and Intermediate. All unruptured aneurysms presented a more Rigid tissue than ruptured or pre-ruptured aneurysms within each gender subgroup. Wall thickness was not correlated to aneurysmal status (ruptured/unruptured). An Intermediate subgroup of unruptured aneurysms with softer tissue characteristic was identified and correlated with multiple documented risk factors of rupture. Conclusion: There is a significant modification in biomechanical properties between ruptured aneurysm, presenting a soft tissue and unruptured aneurysms, presenting a rigid material. This finding strongly supports the idea that a biomechanical risk factor based assessment should be utilized in the to improve the therapeutic decision making.

Urban mobilities: the anglo-catalan production of the Barcelona model

The aim of the project was to gauge the extent to which the so-called ‘Barcelona Model’ of urban transformation has been ‘exported’ to Britain and whether Barcelona has learned from British cities. We engage with the literature on successive British governments’ strategies for cities, focused on collecting data on contemporary policy initiatives and debates in the UK, did interviews in Manchester, London Barcelona and participated in the official visit of Leeds to Barcelona in March. Our research findings to date suggest that there is a good deal of mobility and interaction between Barcelona and the UK. However, it is by no means certain that this has resulted in definite instances of policy transfer. While the ‘Barcelona model’ has indeed featured in oficial discourse on urban regeneration in the UK, it does not appear to be the preferred best practice ‘model’ – other North American and European cities figure discursively as much, if not more. Where Barcelona does feature in official discourse, it is usually as an example of good design and an appealing urban aesthetic, rather than in terms of economic or social policy best practice. Our research suggests that the Barcelona model is seen as non-transferable to the UK due to the relatively more centralised governance structure therein.In contrast, evidence collected suggests that the Barcelona model is not influenced by UK British cities experiences but there is small evidence of being influenced by UK-based professionals.

A Model for Improving the Quality of Student Internship Placements in Engineering Degrees

Work Internship Placements (WIP) is a new and transversal enterprise internships programme, which is focused on quality improvement, academic control and satisfaction of collaborating enterprises. This programme is addressed to the engineering students of the PolytechnicSchool at the University of Girona (UdG) in Spain. The fundamental WIP infrastructure combines a web-based intranet platform, that provides a complete set of WIP tools, with a protocol of procedures and tasks that are observed and followed at all internship stages by every participating agent, i.e. enterprises, students, coaching professors and administrative staff. Our new programme is centered on a broader, more holistic internship placement procedure than the traditional “career and academic goals” approach. The WIP programme has been found to be a valuable asset in addressing enterprise and student needs in the experiential project

A limited area model intercomparison on the "Montserrat-2000" flash-flood event using statistical and deterministic methods

In the scope of the European project Hydroptimet, INTERREG IIIB-MEDOCC programme, limited area model (LAM) intercomparison of intense events that produced many damages to people and territory is performed. As the comparison is limited to single case studies, the work is not meant to provide a measure of the different models' skill, but to identify the key model factors useful to give a good forecast on such a kind of meteorological phenomena. This work focuses on the Spanish flash-flood event, also known as "Montserrat-2000" event. The study is performed using forecast data from seven operational LAMs, placed at partners' disposal via the Hydroptimet ftp site, and observed data from Catalonia rain gauge network. To improve the event analysis, satellite rainfall estimates have been also considered. For statistical evaluation of quantitative precipitation forecasts (QPFs), several non-parametric skill scores based on contingency tables have been used. Furthermore, for each model run it has been possible to identify Catalonia regions affected by misses and false alarms using contingency table elements. Moreover, the standard "eyeball" analysis of forecast and observed precipitation fields has been supported by the use of a state-of-the-art diagnostic method, the contiguous rain area (CRA) analysis. This method allows to quantify the spatial shift forecast error and to identify the error sources that affected each model forecasts. High-resolution modelling and domain size seem to have a key role for providing a skillful forecast. Further work is needed to support this statement, including verification using a wider observational data set.

Un model d'implantació d'un sistema de gestió de la documentació administrativa: el projecte DursiGED

[cat] Aquest article descriu el procés d'implantació d'un sistema de gestió de la documentació administrativa al Departament d'Universitats, Recerca i Societat de la Informació de la Generalitat de Catalunya (actualment Departament d'Innovació, Universitats i Empresa). El projecte, anomenat DursiGED, ha inclòs l'anàlisi, el desenvolupament i la implantació dels productes i serveis necessaris per gestionar la documentació electrònica i en suport paper de manera normalitzada i d'acord amb uns paràmetres de qualitat. L'article inclou la descripció de la planificació del projecte, el procés d'implantació i seguiment, i els productes i serveis que n'han resultat.

Local model predictive control experiences with differential driven wheeled mobile robots

This work extends a previously developed research concerning about the use of local model predictive control in differential driven mobile robots. Hence, experimental results are presented as a way to improve the methodology by considering aspects as trajectory accuracy and time performance. In this sense, the cost function and the prediction horizon are important aspects to be considered. The aim of the present work is to test the control method by measuring trajectory tracking accuracy and time performance. Moreover, strategies for the integration with perception system and path planning are briefly introduced. In this sense, monocular image data can be used to plan safety trajectories by using goal attraction potential fields