Bond strength of orthodontic brackets using different light and self-curing cements

The purpose of the study was to evaluate the shear bond strength of stainless steel orthodontic brackets directly bonded to extracted human premolar teeth. Fifty teeth were randomly divided into ¿ve groups: (1) System One (chemically cured composite resin), (2) Light Bond (light-cured composite resin), (3) Vivaglass Cem (self-curing glass ionomer cement), (4) Fuji Ortho LC (light-cured glass ionomer cement) used after 37% orthophosphoric acid¿etching of enamel (5) Fuji Ortho LC without orthophosphoric acid¿etching. The brackets were placed on the buccal and lingual surfaces of each tooth, and the specimens were stored in distilled water (24 hours) at 378C and thermocycled. Teeth were mounted on acrylic block frames, and brackets were debonded using an Instron machine. Shear bond strength values at fracture (Nw)were recorded. ANOVA and Student-Newman-Keuls multiple comparison tests were performed (P , .05). Bonding failure site was recorded by stereomicroscope and analyzed by Chi-square test, selected specimens of each group were observed by scanning electron microscope. System One attained the highest bond strength. Light Bond and Fuji Ortho LC, when using an acid-etching technique, obtained bond strengths that were within the range of estimated bond strength values for successful clinical bonding. Fuji Ortho LC and Vivaglass Cem left an almost clean enamel surface after debracketing.

Debt and deficit fluctuations and the structure of bond markets

We analyse the implications of optimal taxation for the stochastic behaviour of debt. We show that when a government pursues an optimal fiscal policy under complete markets, the value of debt has the same or less persistence than other variables in the economy and it declines in response to shocks that cause the deficit to increase. By contrast, under incomplete markets debt shows more persistence than other variables and it increases in response to shocks that cause a higher deficit. Data for US government debt reveals diametrically opposite results from those of complete markets and is much more supportive of bond market incompleteness.

In Search of a theory of debt management

A growing literature integrates theories of debt management into models of optimal fiscal policy. One promising theory argues that the composition of government debt should be chosen so that fluctuations in the market value of debt offset changes in expected future deficits. This complete market approach to debt management is valid even when the government only issues non-contingent bonds. A number of authors conclude from this approach that governments should issue long term debt and invest in short term assets. We argue that the conclusions of this approach are too fragile to serve as a basis for policy recommendations. This is because bonds at different maturities have highly correlated returns, causing the determination of the optimal portfolio to be ill-conditioned. To make this point concrete we examine the implications of this approach to debt management in various models, both analytically and using numerical methods calibrated to the US economy. We find the complete market approach recommends asset positions which are huge multiples of GDP. Introducing persistent shocks or capital accumulation only worsens this problem. Increasing the volatility of interest rates through habits partly reduces the size of these simulations we find no presumption that governments should issue long term debt ? policy recommendations can be easily reversed through small perturbations in the specification of shocks or small variations in the maturity of bonds issued. We further extend the literature by removing the assumption that governments every period costlessly repurchase all outstanding debt. This exacerbates the size of the required positions, worsens their volatility and in some cases produces instability in debt holdings. We conclude that it is very difficult to insulate fiscal policy from shocks by using the complete markets approach to debt management. Given the limited variability of the yield curve using maturities is a poor way to substitute for state contingent debt. The result is the positions recommended by this approach conflict with a number of features that we believe are important in making bond markets incomplete e.g allowing for transaction costs, liquidity effects, etc.. Until these features are all fully incorporated we remain in search of a theory of debt management capable of providing robust policy insights.

Study of the influence of grain size and precipitates on the electromagnetic losses in different grades of non-oriented fully processed electrical steel

The study was performed in the installations of OCAS, a Steel Research Centre of ArcelorMittal. Taking M32 steel (3.25%Si+0.9%Al) as the basis chemical composition and three different thicknesses (0.35, 0.5 and 0.65mm), different annealing conditions (temperature and time) have been applied in the laboratory simulator at St. Chély, France. The aim was to link annealing parameters, grain size and energy loss. It was determined the optimum annealing parameters to reach the lowest power losses for three different grades of non-oriented fully processed electrical steel. In addition, M250-50 samples having different magnetic behaviour (high and low losses) but the same grain size and texture, have been analyzed in terms of TEM observations of their precipitates, in the University of Marseille. The results reveal that a high amount of medium and big precipitates (&10 nm) worsen the magnetic properties of the material. The small precipitates (&10nm) do not have a strong influence on the magnetic properties. The presence of precipitates can have a great influence on the power losses and further work is clearly necessary.

Link between microstructure and properties in new metallurgical concepts for very low loss non-oriented electrical steel

The influence of chemistry and soaking temperature (maximal temperature of the continuous annealing) on the final properties of non-oriented electrical steels has been studied. With this objective two different studies have been performed. First the Mn, Ni and Cr content of a low loss electrical steel composition has been modified. An intermediate content and a high content of each element has been added in order to study the influence of this components on the magnetic looses, grain size and texture. Secondly the influence of the soaking temperature on magnetic properties, grain size and oxidation in four grades of non-oriented electrical steels (Steel A, B, C and D) was studied.

Modelling the cooling of concrete by piped water

Piped water is used to remove hydration heat from concrete blocks during construction. In this paper we develop an approximate model for this process. The problem reduces to solving a one-dimensional heat equation in the concrete, coupled with a first order differential equation for the water temperature. Numerical results are presented and the effect of varying model parameters shown. An analytical solution is also provided for a steady-state constant heat generationmodel. This helps highlight the dependence on certain parameters and can therefore provide an aid in the design of cooling systems.

Quantiles of the Realized Stock-Bond Correlation

Abstract: We scrutinize the realized stock-bond correlation based upon high frequency returns. We use quantile regressions to pin down the systematic variation of the extreme tails over their economic determinants. The correlation dependence behaves differently when the correlation is large negative and large positive. The important explanatory variables at the extreme low quantile are the short rate, the yield spread, and the volatility index. At the extreme high quantile the bond market liquidity is also important. The empirical fi…ndings are only partially robust to using less precise measures of the stock-bond correlation. The results are not caused by the recent …financial crisis. Keywords: Extreme returns; Financial crisis; Realized stock-bond correlation; Quantile regressions; VIX. JEL Classifi…cations: C22; G01; G11; G12

Smooth Transition Patterns in the Realized Stock- Bond Correlation

Abstract: We analyze the realized stock-bond correlation. Gradual transitions between negative and positive stock-bond correlation is accommodated by the smooth transition regression (STR) model. The changes in regime are de…ned by economic and …financial transition variables. Both in sample and out-of- sample results document that STR models with multiple transition variables outperform STR models with a single transition variable. The most important transition variables are the short rate, the yield spread, and the VIX volatility index. Keywords: realized correlation; smooth transition regressions; stock-bond correlation; VIX index JEL Classifi…cations: C22; G11; G12; G17

The nature of the Cr-C bond: direct estimation of aromaticity in Fischer carbenes

Report for the scientific sojourn at the the Philipps-Universität Marburg, Germany, from september to december 2007. For the first, we employed the Energy-Decomposition Analysis (EDA) to investigate aromaticity on Fischer carbenes as it is related through all the reaction mechanisms studied in my PhD thesis. This powerful tool, compared with other well-known aromaticity indices in the literature like NICS, is useful not only for quantitative results but also to measure the degree of conjugation or hyperconjugation in molecules. Our results showed for the annelated benzenoid systems studied here, that electron density is more concentrated on the outer rings than in the central one. The strain-induced bond localization plays a major role as a driven force to keep the more substituted ring as the less aromatic. The discussion presented in this work was contrasted at different levels of theory to calibrate the method and ensure the consistency of our results. We think these conclusions can also be extended to arene chemistry for explaining aromaticity and regioselectivity reactions found in those systems.In the second work, we have employed the Turbomole program package and density-functionals of the best performance in the state of art, to explore reaction mechanisms in the noble gas chemistry. Particularly, we were interested in compounds of the form H--Ng--Ng--F (where Ng (Noble Gas) = Ar, Kr and Xe) and we investigated the relative stability of these species. Our quantum chemical calculations predict that the dixenon compound HXeXeF has an activation barrier for decomposition of 11 kcal/mol which should be large enough to identify the molecule in a low-temperature matrix. The other noble gases present lower activation barriers and therefore are more labile and difficult to be observable systems experimentally.

Electrochemically promoted carbon-halide bond cleavage in 4-nitrobenzyl halides

This manuscript reports the study of the carbon-halide bond cleavage in 4-nitrobenzyl halides, taking special attention to the iodide and fluoride derivatives. The electrochemical reduction mechanism has been disclosed for both compounds by terms of cyclic voltammetry and controlled potential electrolysis. In the case of 4-nitrobenzyl iodide, a first one electron irreversible wave leads to the corresponding 4-nitrobenzyl radical and iodide. However, in the case of 4-nitrobenzyl fluoride, a first one-electron reversible wave appears at –1.02 vs. SCE followed by one electron irreversible wave. In this second electron transfer process, the cleavage of the C-F bond is taking place, so the bond cleavage reaction occurs at the dianion level. To disclose and understand the electrochemical reduction mechanisms that allows to obtain important thermodynamic and kinetic data that would help in the understanding of C-X bond cleavage. This type of bond dissociation reactions are involved in the metabolism pathways of the human body.

Calorimetry of dehydrogenation and dangling-bond recombination in several hydrogenated amorphous silicon materials

Differential scanning calorimetry (DSC) was used to study the dehydrogenation processes that take place in three hydrogenated amorphous silicon materials: nanoparticles, polymorphous silicon, and conventional device-quality amorphous silicon. Comparison of DSC thermograms with evolved gas analysis (EGA) has led to the identification of four dehydrogenation processes arising from polymeric chains (A), SiH groups at the surfaces of internal voids (A'), SiH groups at interfaces (B), and in the bulk (C). All of them are slightly exothermic with enthalpies below 50 meV/H atoms , indicating that, after dissociation of any SiH group, most dangling bonds recombine. The kinetics of the three low-temperature processes [with DSC peak temperatures at around 320 (A),360 (A'), and 430°C (B)] exhibit a kinetic-compensation effect characterized by a linea relationship between the activation entropy and enthalpy, which constitutes their signature. Their Si-H bond-dissociation energies have been determined to be E (Si-H)0=3.14 (A), 3.19 (A'), and 3.28 eV (B). In these cases it was possible to extract the formation energy E(DB) of the dangling bonds that recombine after Si-H bond breaking [0.97 (A), 1.05 (A'), and 1.12 (B)]. It is concluded that E(DB) increases with the degree of confinement and that E(DB)>1.10 eV for the isolated dangling bond in the bulk. After Si-H dissociation and for the low-temperature processes, hydrogen is transported in molecular form and a low relaxation of the silicon network is promoted. This is in contrast to the high-temperature process for which the diffusion of H in atomic form induces a substantial lattice relaxation that, for the conventional amorphous sample, releases energy of around 600 meV per H atom. It is argued that the density of sites in the Si network for H trapping diminishes during atomic diffusion

Monetary policy with signal extraction from the bond market

Monetary policy is conducted in an environment of uncertainty. This paper sets upa model where the central bank uses real-time data from the bond market togetherwith standard macroeconomic indicators to estimate the current state of theeconomy more efficiently, while taking into account that its own actions influencewhat it observes. The timeliness of bond market data allows for quicker responsesof monetary policy to disturbances compared to the case when the central bankhas to rely solely on collected aggregate data. The information content of theterm structure creates a link between the bond market and the macroeconomythat is novel to the literature. To quantify the importance of the bond market asa source of information, the model is estimated on data for the United Statesand Australia using Bayesian methods. The empirical exercise suggests that thereis some information in the US term structure that helps the Federal Reserve toidentify shocks to the economy on a timely basis. Australian bond prices seemto be less informative than their US counterparts, perhaps because Australia is arelatively small and open economy.

Debt and deficit fluctuations and the structure of bond markets

This paper tests for the market environment within which US fiscal policyoperates, that is we test for the incompleteness of the US government bondmarket. We document the stochastic properties of US debt and deficits andthen consider the ability of competing optimal tax models to account forthis behaviour. We show that when a government pursues an optimal taxpolicy and issues a full set of contingent claims, the value of debthas the same or less persistence than other variables in the economyand declines in response to higher deficit shocks. By contrast, ifgovernments only issue one-period risk free bonds (incomplete markets),debt shows more persistence than other variables and it increases inresponse to expenditure shocks. Maintaining the hypothesis of Ramseybehavior, US data conflicts.

Solving a concrete sleepers production scheduling by genetic algorithms

PRECON S.A is a manufacturing company dedicated to produce prefabricatedconcrete parts to several industries as rail transportation andagricultural industries.Recently, PRECON signed a contract with RENFE,the Spanish Nnational Rail Transportation Company to manufacturepre-stressed concrete sleepers for siding of the new railways of the highspeed train AVE. The scheduling problem associated with the manufacturingprocess of the sleepers is very complex since it involves severalconstraints and objectives. The constraints are related with productioncapacity, the quantity of available moulds, satisfying demand and otheroperational constraints. The two main objectives are related withmaximizing the usage of the manufacturing resources and minimizing themoulds movements. We developed a deterministic crowding genetic algorithmfor this multiobjective problem. The algorithm has proved to be a powerfuland flexible tool to solve the large-scale instance of this complex realscheduling problem.

Modificación del programa Bond-Scand de M.E. Pippy y F.R. Ahamed

Se presenta una modificación del programa Bond-Scand, con vistas a su empleo en ordenadores de reducida capacidad de memoria. Can dicha modificación se pasa de una capacidad de 100 K a 81 K, pudiendo ser ejecutada en el ordenador IBM 360/30 de que dispone la Facultad de Ciencias de la Universidad de Barcelona.