Estimation of zero-sequence impedance of undergrounds cables for single-phase fault location in distribution systems with electric arc

This paper focus on the problem of locating single-phase faults in mixed distribution electric systems, with overhead lines and underground cables, using voltage and current measurements at the sending-end and sequence model of the network. Since calculating series impedance for underground cables is not as simple as in the case of overhead lines, the paper proposes a methodology to obtain an estimation of zero-sequence impedance of underground cables starting from previous single-faults occurred in the system, in which an electric arc occurred at the fault location. For this reason, the signal is previously pretreated to eliminate its peaks voltage and the analysis can be done working with a signal as close as a sinus wave as possible

Improving the efficiency of PV low-power processing circuits by selecting an optimal inductor current of the DC/DC converter

In the context of autonomous sensors powered by small-size photovoltaic (PV) panels, this work analyses how the efficiency of DC/DC-converter-based power processing circuits can be improved by an appropriate selection of the inductor current that transfers the energy from the PV panel to a storage unit. Each component of power losses (fixed, conduction and switching losses) involved in the DC/DC converter specifically depends on the average inductor current so that there is an optimal value of this current that causes minimal losses and, hence, maximum efficiency. Such an idea has been tested experimentally using two commercial DC/DC converters whose average inductor current is adjustable. Experimental results show that the efficiency can be improved up to 12% by selecting an optimal value of that current, which is around 300-350 mA for such DC/DC converters.

Current Account imbalances, thriftiness and the real exchange rate in a growing economy

This paper analyses the theoretical relevance of the dynamical aspects of growth on the discussion about the observed positive correlation between per capita real income and real exchange rates. With this purpose, we develop a simple exogenous growth model where the internal, external and intertemporal equilibrium conditions of a typical macroeconomic model are imposed; this last one through the inclusion of a balanced growth path for the foreign assets accumulation. The main result under this consideration is that the relationship defended by the Balassa-Samuelson hypothesis is no more so straightforward. In our particular approach, the mentioned bilateral relationship depends on a parameter measuring thriftiness in the economy. Therefore, the probability of ending up with a positive relationship between growth and real exchange rates -as the classical economic theory predicts- will be higher when the economy is able to maintain a minimum saving ratio. Moreover, given that our model considers a simple Keynesian consumption function, some explosive paths can also be possible.

Real rank zero algebras have the corona factorization property

The purpose of this short note is to prove that a stable separable C*-algebra with real rank zero has the so-called corona factorization property, that is, all the full multiplier projections are properly in finite. Enroute to our result, we consider conditions under which a real rank zero C*-algebra admits an injection of the compact operators (a question already considered in [21]).

Clean Development Mechanism and Sustainable Development: a discussion on the link between the CDM and Sustainable Development, an analysis of the current status of the CDM portfolio, and an multicriteria evaluation of the effects of additional incentives in order to foster broad local Sustainable Development dividends from the CDM projects

vegeu resum en el fitxer adjunt a l'inici del treball de recerca

Assessment of current anglo-saxon proposals about criminal justice and the justification of legal punishment: Moore, Duff and Finnis on retribution, and the challenging compatibility with the up-and-coming Restorative Justice

Pendent

Series enlazadas de algunos agregados económicos nacionales y regionales, 1955-2007 Versión 2.1

I construct "homogeneous" series of GVA at current and constant prices, employment and population for the Spain and its regions covering the period 1955-2007. The series are obtained by linking the Regional Accounts of the National Statistical Institute with the series constructed by Julio Alcaide and his team for the BBVA Foundation. The "switching point" at which this last source stops being used as a reference to construct the linked series is determined using a procedure that allows me to estimate which of the two competing series would produce an estimator with the lowest MSE when it is used as dependent variable in a regression on an arbitrary independent variable. To the extent that it is possible, the difference between the two series found at the point of linkage is distributed between the initial levels of the older series and its subsequent growth using external estimates of the relevant variables at the beginning of the sample period.

Fase Zero de qualsevol projecte informàtic : l'acció comercial

El propòsit d'aquest TFC és presentar una metodologia lleugera per a aplicar en aquesta anomenada

A tale of two logits, compositional data analysis and zero observations

The application of compositional data analysis through log ratio trans-formations corresponds to a multinomial logit model for the shares themselves.This model is characterized by the property of Independence of Irrelevant Alter-natives (IIA). IIA states that the odds ratio in this case the ratio of shares is invariant to the addition or deletion of outcomes to the problem. It is exactlythis invariance of the ratio that underlies the commonly used zero replacementprocedure in compositional data analysis. In this paper we investigate using thenested logit model that does not embody IIA and an associated zero replacementprocedure and compare its performance with that of the more usual approach ofusing the multinomial logit model. Our comparisons exploit a data set that com-bines voting data by electoral division with corresponding census data for eachdivision for the 2001 Federal election in Australia

Evaluating the probability and the impact of a failure in GMPLS based networks

In this paper, we define a new scheme to develop and evaluate protection strategies for building reliable GMPLS networks. This is based on what we have called the network protection degree (NPD). The NPD consists of an a priori evaluation, the failure sensibility degree (FSD), which provides the failure probability, and an a posteriori evaluation, the failure impact degree (FID), which determines the impact on the network in case of failure, in terms of packet loss and recovery time. Having mathematical formulated these components, experimental results demonstrate the benefits of the utilization of the NPD, when used to enhance some current QoS routing algorithms in order to offer a certain degree of protection

Adding QoS protection in order to enhance MPLS QoS routing

In this paper, a method for enhancing current QoS routing methods by means of QoS protection is presented. In an MPLS network, the segments (links) to be protected are predefined and an LSP request involves, apart from establishing a working path, creating a specific type of backup path (local, reverse or global). Different QoS parameters, such as network load balancing, resource optimization and minimization of LSP request rejection should be considered. QoS protection is defined as a function of QoS parameters, such as packet loss, restoration time, and resource optimization. A framework to add QoS protection to many of the current QoS routing algorithms is introduced. A backup decision module to select the most suitable protection method is formulated and different case studies are analyzed

All-Optical Label Stacking: Easing the Trade-offs Between Routing and Architecture Cost in All-Optical Packet Switching

All-optical label swapping (AOLS) forms a key technology towards the implementation of all-optical packet switching nodes (AOPS) for the future optical Internet. The capital expenditures of the deployment of AOLS increases with the size of the label spaces (i.e. the number of used labels), since a special optical device is needed for each recognized label on every node. Label space sizes are affected by the way in which demands are routed. For instance, while shortest-path routing leads to the usage of fewer labels but high link utilization, minimum interference routing leads to the opposite. This paper studies all-optical label stacking (AOLStack), which is an extension of the AOLS architecture. AOLStack aims at reducing label spaces while easing the compromise with link utilization. In this paper, an integer lineal program is proposed with the objective of analyzing the softening of the aforementioned trade-off due to AOLStack. Furthermore, a heuristic aiming at finding good solutions in polynomial-time is proposed as well. Simulation results show that AOLStack either a) reduces the label spaces with a low increase in the link utilization or, similarly, b) uses better the residual bandwidth to decrease the number of labels even more

Context switching accounting mechanism

How many times a given process p preempts, either voluntarily or involuntarily, is an important threat to computer's processes throughput. Whenever running cpu-bound processes on a multi-core system without an actual system grid engine as commonly found on Grid Clusters, their performance and stability are directly related to their accurate implementation and the system reliability which is, to an extend, an important caveat most of the times so difficult to detect. Context Switching is time-consuming. Thus, if we could develop a tool capable of detecting it and gather data from every single performed Context Switch, we would beable to study this data and present some results that should pin-point at whatever their main cause could be.

CoDaPack. An Excel and Visual Basic based software of compositional data analysis. Current version and discussion form upcoming versions

In the eighties, John Aitchison (1986) developed a new methodological approach for the statistical analysis of compositional data. This new methodology was implemented in Basic routines grouped under the name CODA and later NEWCODA inMatlab (Aitchison, 1997). After that, several other authors have published extensions to this methodology: Marín-Fernández and others (2000), Barceló-Vidal and others (2001), Pawlowsky-Glahn and Egozcue (2001, 2002) and Egozcue and others (2003). (...)

Bayesian tools for zero counts in compositional data

The log-ratio methodology makes available powerful tools for analyzing compositionaldata. Nevertheless, the use of this methodology is only possible for those data setswithout null values. Consequently, in those data sets where the zeros are present, aprevious treatment becomes necessary. Last advances in the treatment of compositionalzeros have been centered especially in the zeros of structural nature and in the roundedzeros. These tools do not contemplate the particular case of count compositional datasets with null values. In this work we deal with \count zeros" and we introduce atreatment based on a mixed Bayesian-multiplicative estimation. We use the Dirichletprobability distribution as a prior and we estimate the posterior probabilities. Then weapply a multiplicative modi¯cation for the non-zero values. We present a case studywhere this new methodology is applied.Key words: count data, multiplicative replacement, composition, log-ratio analysis