Nonequilibrium orientational patterns in two-component Langmuir monolayers

A model of a phase-separating two-component Langmuir monolayer in the presence of a photoinduced reaction interconverting two components is formulated. An interplay between phase separation, orientational ordering, and reaction is found to lead to a variety of nonequilibrium self-organized patterns, both stationary and traveling. Examples of the patterns, observed in numerical simulations, include flowing droplets, traveling stripes, wave sources, and vortex defects.

On a size-structured two-phase population model with infinite states-at-birth

In this work we introduce and analyze a linear size-structured population model with infinite states-at-birth. We model the dynamics of a population in which individuals have two distinct life-stages: an “active” phase when individuals grow, reproduce and die and a second “resting” phase when individuals only grow. Transition between these two phases depends on individuals’ size. First we show that the problem is governed by a positive quasicontractive semigroup on the biologically relevant state space. Then we investigate, in the framework of the spectral theory of linear operators, the asymptotic behavior of solutions of the model. We prove that the associated semigroup has, under biologically plausible assumptions, the property of asynchronous exponential growth.

Enhancing fault management performance of two-step QoS routing algorithms in GMPLS networks

In this paper a novel methodology aimed at minimizing the probability of network failure and the failure impact (in terms of QoS degradation) while optimizing the resource consumption is introduced. A detailed study of MPLS recovery techniques and their GMPLS extensions are also presented. In this scenario, some features for reducing the failure impact and offering minimum failure probabilities at the same time are also analyzed. Novel two-step routing algorithms using this methodology are proposed. Results show that these methods offer high protection levels with optimal resource consumption

Effective Lagrangian of the two Higgs doublet model

We consider the two Higgs doublet model extension of the standard model in the limit where all physical scalar particles are very heavy, too heavy, in fact, to be experimentally produced in forthcoming experiments. The symmetry-breaking sector can thus be described by an effective chiral Lagrangian. We obtain the values of the coefficients of the O(p4) operators relevant to the oblique corrections and investigate to what extent some nondecoupling effects may remain at low energies. A comparison with recent CERN LEP data shows that this model is indistinguishable from the standard model with one doublet and with a heavy Higgs boson, unless the scalar mass splittings are large.

Identification of myxobacteria-derived HIV inhibitors by a high-throughput two-step infectivity assay

Drug-resistance and therapy failure due to drug-drug interactions are the main challenges in current treatment against Human Immunodeficiency Virus (HIV) infection. As such, there is a continuous need for the development of new and more potent anti-HIV drugs. Here we established a high-throughput screen based on the highly permissive TZM-bl cell line to identify novel HIV inhibitors. The assay allows discriminating compounds acting on early and/or late steps of the HIV replication cycle. The platform was used to screen a unique library of secondary metabolites derived from myxobacteria. Several hits with good anti-HIV profiles were identified. Five of the initial hits were tested for their antiviral potency. Four myxobacterial compounds, sulfangolid C, soraphen F, epothilon D and spirangien B, showed EC50 values in the nM range with SI > 15. Interestingly, we found a high amount of overlapping hits compared with a previous screen for Hepatitis C Virus (HCV) using the same library. The unique structures and mode-of-actions of these natural compounds make myxobacteria an attractive source of chemicals for the development of broad-spectrum antivirals. Further biological and structural studies of our initial hits might help recognize smaller drug-like derivatives that in turn could be synthesized and further optimized.

Indirect likelihood inference

Given a sample from a fully specified parametric model, let Zn be a given finite-dimensional statistic - for example, an initial estimator or a set of sample moments. We propose to (re-)estimate the parameters of the model by maximizing the likelihood of Zn. We call this the maximum indirect likelihood (MIL) estimator. We also propose a computationally tractable Bayesian version of the estimator which we refer to as a Bayesian Indirect Likelihood (BIL) estimator. In most cases, the density of the statistic will be of unknown form, and we develop simulated versions of the MIL and BIL estimators. We show that the indirect likelihood estimators are consistent and asymptotically normally distributed, with the same asymptotic variance as that of the corresponding efficient two-step GMM estimator based on the same statistic. However, our likelihood-based estimators, by taking into account the full finite-sample distribution of the statistic, are higher order efficient relative to GMM-type estimators. Furthermore, in many cases they enjoy a bias reduction property similar to that of the indirect inference estimator. Monte Carlo results for a number of applications including dynamic and nonlinear panel data models, a structural auction model and two DSGE models show that the proposed estimators indeed have attractive finite sample properties.

R&D cooperation between Spanish firms and scientific partners: what is the role of tertiary education?

This paper explores the factors that determine firm’s R&D cooperation with different partners, paying special attention on the role of tertiary education (degree and PhDs level) in facilitating the connection between the firms and the to scientific bodies (technology centres, public research centres and universities). Here, we attempt to answer two questions. First, are innovative firms that carry out internal and external R&D activities more likely to cooperate on R&D projects with other partners? Second, do Spanish innovative firms with a high participation of researchers with degrees or PhDs tend to cooperate more with scientific partners? To answer both questions we apply a three-dimensional approach on a firm level Panel Data with a sample of 4.998 manufacturing and services Spanish firms. First, we run a complementary test between external R&D acquisition and skilled research workers and find that firms which carry out external R&D activities obtain a greater return on R&D cooperation when they have skilled workers in R&D, especially in high-tech manufactures and KIS services. Second, we carry out a 2-step tobit model to estimate, in the first stage, the determinants that explain whether Spanish innovative firms cooperate or not; and in the second stage the factors that affect the choice of partners. And third, we apply an ordered probit model to test the marginal effects of explanatory variables on the different partners. Here we contrast some of the most interesting empirical hypotheses of previous studies, and which emphasize the role of employees with degrees and PhDs in facilitating cooperative R&D between firms and scientific partners.

R&D cooperation between Spanish firms and scientific partners: what is the role of tertiary education?

This paper explores the factors that determine firm’s R&D cooperation with different partners, paying special attention on the role of tertiary education (degree and PhDs level) in facilitating the connection between the firms and the to scientific bodies (technology centres, public research centres and universities). Here, we attempt to answer two questions. First, are innovative firms that carry out internal and external R&D activities more likely to cooperate on R&D projects with other partners? Second, do Spanish innovative firms with a high participation of researchers with degrees or PhDs tend to cooperate more with scientific partners? To answer both questions we apply a three-dimensional approach on a firm level Panel Data with a sample of 4.998 manufacturing and services Spanish firms. First, we run a complementary test between external R&D acquisition and skilled research workers and find that firms which carry out external R&D activities obtain a greater return on R&D cooperation when they have skilled workers in R&D, especially in high-tech manufactures and KIS services. Second, we carry out a 2-step tobit model to estimate, in the first stage, the determinants that explain whether Spanish innovative firms cooperate or not; and in the second stage the factors that affect the choice of partners. And third, we apply an ordered probit model to test the marginal effects of explanatory variables on the different partners. Here we contrast some of the most interesting empirical hypotheses of previous studies, and which emphasize the role of employees with degrees and PhDs in facilitating cooperative R&D between firms and scientific partners. JEL classification: O31, O33, O38. Key words: Determinants R&D cooperation, industry-university flows, PhD research workers.

Porting and performance analysis of EC-Earth System on the BSC-MareNostrum Supercomputer

Earth System Models (ESM) have been successfuly developed over past few years, and are currently beeing used for simulating present day-climate, seasonal to interanual predictions of climate change. The supercomputer performance plays an important role in climate modeling since one of the challenging issues for climate modellers is to efficiently and accurately couple earth System components on present day computers architectures. At the Barcelona Supercomputing Center (BSC), we work with the EC- Earth System Model. The EC- Earth is an ESM, which currently consists of an atmosphere (IFS) and an ocean (NEMO) model that communicate with each other through the OASIS coupler. Additional modules (e.g. for chemistry and vegetation ) are under development. The EC-Earth ESM has been ported successfully over diferent high performance computin platforms (e.g, IBM P6 AIX, CRAY XT-5, Intelbased Linux Clusters, SGI Altix) at diferent sites in Europ (e.g., KNMI, ICHEC, ECMWF). The objective of the first phase of the project was to identify and document the issues related with the portability and performance of EC-Earth on the MareNostrum supercomputer, a System based on IBM PowerPC 970MP processors and run under a Linux Suse Distribution. EC-Earth was successfully ported to MareNostrum, and a compilation incompatibilty was solved by a two step compilation approach using XLF version 10.1 and 12.1 compilers. In addition, the EC-Earth performance was analyzed with respect to escalability and trace analysis with the Paravear software. This analysis showed that EC-Earth with a larger number of IFS CPUs (<128) is not feasible at the moment since some issues exists with the IFS-NEMO balance and MPI Communications.

Social value orientation as a moral intuition: Decision-making in the dictator game

We studied the decision making process in the Dictator Game and showed that decisions are the result of a two-step process. In a first step, decision makers generate an automatic, intuitive proposal. Given sufficient motivation and cognitive resources, they adjust this in a second, more deliberated phase. In line with the social intuitionist model, we show that one s Social Value Orientation determines intuitive choice tendencies in the first step, and that this effect is mediated by the dictator s perceived interpersonal closeness with the receiver. Self-interested concerns subsequently leadto a reduction of donation size in step 2. Finally, we show that increasing interpersonal closeness can promote pro-social decision-making.

Measuring gait using a ground laser range sensor

This paper describes a mesurement system designed to register the displacement of the legs using a two-dimensional laser range sensor with a scanning plane parallel to the ground and extract gait parameters. In the proposed methodology, the position of the legs is estimated by fitting two circles with the laser points that define their contour and the gait parameters are extracted applying a step-line model to the estimated displacement of the legs to reduce uncertainty in the determination of the stand and swing phase of the gait. Results obtained in a range up to 8 m shows that the systematic error in the location of one static leg is lower than 10 mm with and standard deviation lower than 8 mm; this deviation increases to 11 mm in the case of a moving leg. The proposed measurement system has been applied to estimate the gait parameters of six volunteers in a preliminary walking experiment.

Stability and manipulation in representative democracies

This paper is devoted to the analysis of all constitutions equipped with electoral systems involving two step procedures. First, one candidate is elected in every jurisdiction by the electors in that jurisdiction, according to some aggregation procedure. Second, another aggregation procedure collects the names of the jurisdictional winners in order to designate the final winner. It appears that whenever individuals are allowed to change jurisdiction when casting their ballot, they are able to manipulate the result of the election except in very few cases. When imposing a paretian condition on every jurisdictions voting rule, it is shown that, in the case of any finite number of candidates, any two steps voting rule that is not manipulable by movement of the electors necessarily gives to every voter the power of overruling the unanimity on its own. A characterization of the set of these rules is next provided in the case of two candidates.

Multinationals, R&D and productivity: Evidence for UK Manufactoring firms

In this study we analyze multinationality (domestic-based firms vs. multinationals) and foreignness (foreign vs. domestic firms) effects in the returns of R&D to productivity. We follow a two-step strategy. In the first step, we consistently ''s productivity by GMM and numerically compute the sample distribution of the R&D returns. In the second step, we use stochastic dominance techniques to make inferences on the multinationality and foreignness effects. Results for a panel of UK manufacturing firms suggest that multinationality and foreignness effects operate in an opposite way: whilst the multinationality effect enhances R&D returns, the foreignness diminishes them.

Spermatogenesis of the Spider Crab Maja brachydactyla (Decapoda: Brachyura)

This study describes spermatogenesis in a majid crab (Maja brachydactyla) using electron microscopy and reports the origin of the different organelles present in the spermatozoa. Spermatogenesis in M. brachydactyla follows the general pattern observed in other brachyuran species but with several peculiarities. Annulate lamellae have been reported in brachyuran spermatogenesis during the diplotene stage of first spermatocytes, the early and mid-spermatids. Unlike previous observations, a Golgi complex has been found in midspermatids and is involved in the development of the acrosome. The Golgi complex produces two types of vesicles: light vesicles and electron-dense vesicles. The light vesicles merge into the cytoplasm, giving rise to the proacrosomal vesicle. The electron-dense vesicles are implicated in the formation of an electron-dense granule, which later merges with the proacrosomal vesicle. In the late spermatid, the endoplasmic reticulum and the Golgi complex degenerate and form the structures–organelles complex found in the spermatozoa. At the end of spermatogenesis, the materials in the proacrosomal vesicle aggregate in a two-step process, forming the characteristic concentric three-layered structure of the spermatozoon acrosome. The newly formed spermatozoa from testis show the typical brachyuran morphology.

SLAM using an Imaging Sonar for Partially Structured Underwater Environments

In this paper we describe a system for underwater navigation with AUVs in partially structured environments, such as dams, ports or marine platforms. An imaging sonar is used to obtain information about the location of planar structures present in such environments. This information is incorporated into a feature-based SLAM algorithm in a two step process: (I) the full 360deg sonar scan is undistorted (to compensate for vehicle motion), thresholded and segmented to determine which measurements correspond to planar environment features and which should be ignored; and (2) SLAM proceeds once the data association is obtained: both the vehicle motion and the measurements whose correct association has been previously determined are incorporated in the SLAM algorithm. This two step delayed SLAM process allows to robustly determine the feature and vehicle locations in the presence of large amounts of spurious or unrelated measurements that might correspond to boats, rocks, etc. Preliminary experiments show the viability of the proposed approach