Atomic structure of the nanocrystalline Si particles appearing in nanostructured Si thin films produced in low-temperature radiofrequency plasmas

Nanostructured Si thin films, also referred as polymorphous, were grown by plasma-enhanced chemical vapor deposition. The term "polymorphous" is used to define silicon material that consists of a two-phase mixture of amorphous and ordered Si. The plasma conditions were set to obtain Si thin films from the simultaneous deposition of radical and ordered nanoparticles. Here, a careful analysis by electron transmission microscopy and electron diffraction is reported with the aim to clarify the specific atomic structure of the nanocrystalline particles embedded in the films. Whatever the plasma conditions, the electron diffraction images always revealed the existence of a well-defined crystalline structure different from the diamondlike structure of Si. The formation of nanocrystallinelike films at low temperature is discussed. A Si face-cubic-centered structure is demonstrated here in nanocrystalline particles produced in low-pressure silane plasma at room temperature.

Transmisión intergeneracional de la pobreza en Uruguay

El deterioro de los niveles de desigualdad y el empeoramiento de los niveles de pobreza que se registraron en Uruguay durante la crisis de comienzos del siglo XXI, tuvieron una especial repercusión en la infancia y la juventud, haciendo más vulnerable el futuro desempeño socioeconómico de las nuevas generaciones. El presente trabajo pretende ahondar en la existencia y extensión de la transmisión intergeneracional de la pobreza (TIP) en Uruguay. La ausencia de datos de panel impide la utilización de algunas de las metodologías más difundidas, como la correlación intergeneracional de ingresos, por lo cual se opta por centrar el análisis en la correlación intergeneracional educativa, mediante la utilización de la Encuesta Continua de Hogares del año 2005. Los resultados comprueban la existencia de correlación intergeneracional educativa en Uruguay, que se ubica por debajo de la registrada en la mayoría de los países de América Latina, y por encima de la registrada en los países más desarrollados. Para ahondar en los determinantes de la TIP se ha estimado un modelo de selección discreta que permite explicar la probabilidad de los jóvenes de terminar la enseñanza secundaria (umbral que permite situarse fuera de la situación de pobreza) en función de una serie de variables vinculadas con el entorno familiar. Se comprueba así la significativa importancia de la educación de los padres en la explicación de los resultados de los hijos, respaldando los enfoques teóricos del capital humano y de la transmisión de habilidades. El análisis también evidencia el efecto negativo de un mayor número de hermanos en la familia, comprobando la importancia del enfoque de cantidad calidad de Becker. Finalmente, los resultados permiten entrever la importancia de otros mecanismos de la TIP como la segregación residencial, el assortative mating y el embarazo adolescente.

Preparació de puntes de tungstè per a microscòpia d'efecte túnel (STM)

Es presenten els resultats experimentals obtinguts durant l’estudi sistemàtic realitzat de la preparació electroquímica de puntes de tungstè per al Microscopi d’Efecte Túnel (STM), fent servir dos electròlits: KOH i NaOH. L’estudi sobre la morfologia, longitud de la punta i radi de curvatura de la punta en funció del voltatge aplicat i les concentracions de l’electròlit es descriu al capítol 3. La caracterització de les puntes es va dur a terme, per una part, mitjançant un microscòpic electrònic de rastreig (SEM) i per l’altre banda, amb el ús de les puntes obtingudes al STM. En resumen, els resultats mostren que ambdós electròlits permeten obtenir puntes que es poden fer servir amb èxit per l’obtenció d’imatges amb l’STM. Les millors puntes són aquelles que s’obtenen dins de rangs de concentracions d’electròlit baixes, entre valor de 10 a 15% en pes pel NaOH i entre 10 i 20% pel KOH i rangs de voltatge entre 3 a 7 V pel NaOH i 4 a 8 V pel KOH. S’observa que es requereixen temps d’atac electroquímic menors fent servir com a electròlit NaOH. S’estudia, en el capítol 4, el tractament que requereix la punta per tal d’eliminar les impureses de la seva superfície. Es realitzen diferents proves amb tres mètodes de neteja: (1) tractament químic, (2) bombardeig iònic i (3) tractament tèrmic de recuit. En el capítol 5 del projecte s’analitzen les imatges d’una mostra d’or, Au(110), d’estructura coneguda, amb el microscopi d’efecte túnel STM) del laboratori fent servir les puntes obtingudes sota les condicions considerades òptimes. El resultat confirma el bon comportament de les puntes obtingudes sota les condicions descrites en els capítols anteriors i establert una pauta a seguir per obtenir puntes d’una manera senzilla i reproduïble.

Slope processes in changing permafrost environments: a geomorphological and sedimentological approach

Estudi realitzat a partir d’una estada al Centro de Estudos Geograficos de la Universidade de Lisboa, Portugal, entre 2011 i 2012. En aquest grup he desenvolupat la meva recerca focalitzada en ambients polars en presència de permafrost, concretament centrada en l’extrem nord-occidental de la Península Antàrtica (Shetland del Sud) i a l’Alt Àrtic (Svalvard). Ambdós àrees han registrat un augment de temperatura molt significatiu les darreres dècades. La meva recerca ha contemplat l’anàlisi de registres sedimentaris (lacustres, eòlics, vessant) i la monitorització de processos geomorfològics actuals a fi efecte d’entendre la dinàmica ambiental present i passada (i.e. clima). Amb aquesta finalitat he realitzat tres campanyes de treball de camp a l’Antàrtida i dues a l’Àrtic. El posterior treball de laboratori i d’oficina està propiciant nombroses publicacions que donen fe dels èxits assolits. A més, cal enfatitzar altres activitats desenvolupades durant la BP-A: coneixement de com organitzar i gestionar una campanya antàrtica, docència universitària, participació en comitès, associacions i tribunals de tesis doctorals, organització i participació en nombroses conferències, treball de camp en noves àrees d’estudi, referee per revistes internacionals, etc. Tanmateix, la concessió del projecte de recerca HOLOANTAR, del qual en sóc l’Investigador Responsable, ha estat l’èxit més important d’aquesta estada. Aquest projecte m’està conferint la capacitat de gestionar i integrar la recerca de 16 investigadors de diferents nacionalitats des d’una perspectiva multidisciplinar. Tothora, cal remarcar que no s’ha assolit un dels èxits que pretenia el meu projecte de BP-A: la transferència del bagatge i coneixement adquirit al sistema de recerca català. Malgrat haver presentat la meva candidatura per un contracte BP-B per tal que aquest background après a l’estranger revertís a Catalunya, el procés de selecció emprat en la convocatòria ho ha impedit i m’obliga a continuar la meva recerca a l’estranger.

Estudio comparado de la génesis de espeleotemas silíceos en granitoides de climas semiáridos y templados húmedos

Silica speleothems take differenr forms such as cylindrical stems growing from either the floor or the ceiling in granitic caves. Mineralogically they are opal-A and accumulate in successive layers with a whiskery druse tip formed by gypsum crystals. Initially they are porous but progressively become infilled by opal precipitation. This results in formation of solid speleothems. their size is only a few millimetres long. Bacterial activity accelerate quartz dissolution

Nanoscale capacitance microscopy of thin dielectric films

We present an analytical model to interpret nanoscale capacitance microscopy measurements on thin dielectric films. The model displays a logarithmic dependence on the tip-sample distance and on the film thickness-dielectric constant ratio and shows an excellent agreement with finite-element numerical simulations and experimental results on a broad range of values. Based on these results, we discuss the capabilities of nanoscale capacitance microscopy for the quantitative extraction of the dielectric constant and the thickness of thin dielectric films at the nanoscale.

Model for curvature-driven pearling instability in membranes

A phase-field model for dealing with dynamic instabilities in membranes is presented. We use it to study curvature-driven pearling instability in vesicles induced by the anchorage of amphiphilic polymers on the membrane. Within this model, we obtain the morphological changes reported in recent experiments. The formation of a homogeneous pearled structure is achieved by consequent pearling of an initial cylindrical tube from the tip. For high enough concentration of anchors, we show theoretically that the homogeneous pearled shape is energetically less favorable than an inhomogeneous one, with a large sphere connected to an array of smaller spheres.

Viscous fingering in liquid crystals: Anisotropy and morphological transitions

We show that a minimal model for viscous fingering with a nematic liquid crystal in which anisotropy is considered to enter through two different viscosities in two perpendicular directions can be mapped to a twofold anisotropy in the surface tension. We numerically integrate the dynamics of the resulting problem with the phase-field approach to find and characterize a transition between tip splitting and side branching as a function of both anisotropy and dimensionless surface tension. This anisotropy dependence could explain the experimentally observed (reentrant) transition as temperature and applied pressure are varied. Our observations are also consistent with previous experimental evidence in viscous fingering within an etched cell and simulations of solidification.

Phase-field approach to spatial perturbations in normal Saffman-Taylor fingers

We make a numerical study of the effect that spatial perturbations have in normal Saffman-Taylor fingers driven at constant pressure gradients. We use a phase field model that allows for spatial variations in the Hele-Shaw cell. We find that, regardless of the specific way in which spatial perturbations are introduced, a lateral instability develops on the sides of the propagating Saffman-Taylor finger. Moreover, the instability exists regardless of the intensity of spatial perturbations in the cell as long as the perturbations are felt by the finger tip. If, as the finger propagates, the spatial perturbations felt by the tip change, the instability is nonperiodic. If, as the finger propagates, the spatial perturbations felt by the tip are persistent, the instability developed is periodic. In the later case, the instability is symmetrical or asymmetrical depending on the intensity of the perturbation.

Interfacial instabilities of a fluid annulus in a rotating Hele-Shaw cell

We have studied the interfacial instabilities experienced by a liquid annulus as it moves radially in a circular Hele-Shaw cell rotating with angular velocity Omega. The instability of the leading interface (oil displacing air) is driven by the density difference in the presence of centrifugal forcing, while the instability of the trailing interface (air displacing oil) is driven by the large viscosity contrast. A linear stability analysis shows that the stability of the two interfaces is coupled through the pressure field already at a linear level. We have performed experiments in a dry cell and in a cell coated with a thin fluid layer on each plate, and found that the stability depends substantially on the wetting conditions at the leading interface. Our experimental results of the number of fingers resulting from the instability compare well with the predictions obtained through a numerical integration of the coupled equations derived from a linear stability analysis. Deep in the nonlinear regime we observe the emission of liquid droplets through the formation of thin filaments at the tip of outgrowing fingers.

Electrical and optical properties of Zn-In-Sn-O transparent conducting thin films

Indium tin oxide (ITO) is one of the widely used transparent conductive oxides (TCO) for application as transparent electrode in thin film silicon solar cells or thin film transistors owing to its low resistivity and high transparency. Nevertheless, indium is a scarce and expensive element and ITO films require high deposition temperature to achieve good electrical and optical properties. On the other hand, although not competing as ITO, doped Zinc Oxide (ZnO) is a promising and cheaper alternative. Therefore, our strategy has been to deposit ITO and ZnO multicomponent thin films at room temperature by radiofrequency (RF) magnetron co-sputtering in order to achieve TCOs with reduced indium content. Thin films of the quaternary system Zn-In-Sn-O (ZITO) with improved electrical and optical properties have been achieved. The samples were deposited by applying different RF powers to ZnO target while keeping a constant RF power to ITO target. This led to ZITO films with zinc content ratio varying between 0 and 67%. The optical, electrical and morphological properties have been thoroughly studied. The film composition was analysed by X-ray Photoelectron Spectroscopy. The films with 17% zinc content ratio showed the lowest resistivity (6.6 × 10 - 4 Ω cm) and the highest transmittance (above 80% in the visible range). Though X-ray Diffraction studies showed amorphous nature for the films, using High Resolution Transmission Electron Microscopy we found that the microstructure of the films consisted of nanometric crystals embedded in a compact amorphous matrix. The effect of post deposition annealing on the films in both reducing and oxidizing atmospheres were studied. The changes were found to strongly depend on the zinc content ratio in the films.

Velocity fluctuations of fracturelike disruptions of associating polymer solutions

Velocity has been measured as a function of time for propagating crack tips as water is injected into solutions of end-capped associating polymers in a rectanguar Hele-Shaw cell. Measurements were performed for flows with different values of cell gap, channel width, polymer molecular weight, and polymer concentration. The condition for the onset of fracturelike behavior is well described by a Deborah number which uses the shear-thinning shear rate of the polymer solution as a characteristic frequency for network relaxation. At low molecular weight, the onset of fracturelike pattern evolution is accompanied by an abrupt jump in tip velocity, followed by a lower and approximately constant acceleration. At high molecular weight, the transition to fracturelike behavior involves passing through a regime that may be understood in terms of stick-slip dynamics. The crack-tip wanders from side to side and fluctuates (in both speed and velocity along the channel) with a characteristic frequency which depends linearly on the invading fluid injection rate.

Velocity-jump instabilities in Hele-Shaw flow of associating polymer solutions

We study fracturelike flow instabilities that arise when water is injected into a Hele-Shaw cell filled with aqueous solutions of associating polymers. We explore various polymer architectures, molecular weights, and solution concentrations. Simultaneous measurements of the finger tip velocity and of the pressure at the injection point allow us to describe the dynamics of the finger in terms of the finger mobility, which relates the velocity to the pressure gradient. The flow discontinuities, characterized by jumps in the finger tip velocity, which are observed in experiments with some of the polymer solutions, can be modeled by using a nonmonotonic dependence between a characteristic shear stress and the shear rate at the tip of the finger. A simple model, which is based on a viscosity function containing both a Newtonian and a non-Newtonian component, and which predicts nonmonotonic regions when the non-Newtonian component of the viscosity dominates, is shown to agree with the experimental data.

Experiments on anisotropic radial viscous fingering

We observe dendritic patterns in fluid flow in an anisotropic Hele-Shaw cell and measure the tip shapes and trajectories of individual dendritic branches under conditions where the pattern growth appears to be dominated by surface tension anisotropy and also under conditions where kinetic effects appear dominant. In each case, the tip position depends on a power law in the time, but the exponent of this power law can vary significantly among flow realizations. Averaging many growth exponents a yields a =0.640.09 in the surface tension dominated regime and a =0.660.09 in the kinetic regime. Restricting the analysis to realizations when a is very close to 0.6 shows great regularity across pattern regimes in the coefficient of the temporal dependence of the tip trajectory.

Nanometer-scale oxidation of Si(100) surfaces by tapping mode atomic force microscopy

The nanometer¿scale oxidation of Si(100) surfaces in air is performed with an atomic force microscope working in tapping mode. Applying a positive voltage to the sample with respect to the tip, two kinds of modifications are induced on the sample: grown silicon oxide mounds less than 5 nm high and mounds higher than 10 nm (which are assumed to be gold depositions). The threshold voltage necessary to produce the modification is studied as a function of the average tip¿to¿sample distance.