79 resultados para Subinertial frequencies
em Consorci de Serveis Universitaris de Catalunya (CSUC), Spain
Resumo:
A study was conducted on the methods of basis set superposition error (BSSE)-free geometry optimization and frequency calculations in clusters larger than a dimer. In particular, three different counterpoise schemes were critically examined. It was shown that the counterpoise-corrected supermolecule energy can be easily obtained in all the cases by using the many-body partitioning of energy
Resumo:
The aim of this project is to accomplish an application software based on Matlab to calculate the radioelectrical coverage by surface wave of broadcast radiostations in the band of Medium Wave (WM) all around the world. Also, given the location of a transmitting and a receiving station, the software should be able to calculate the electric field that the receiver should receive at that specific site. In case of several transmitters, the program should search for the existence of Inter-Symbol Interference, and calculate the field strenght accordingly. The application should ask for the configuration parameters of the transmitter radiostation within a Graphical User Interface (GUI), and bring back the resulting coverage above a map of the area under study. For the development of this project, it has been used several conductivity databases of different countries, and a high-resolution elevation database (GLOBE). Also, to calculate the field strenght due to groundwave propagation, it has been used ITU GRWAVE program, which must be integrated into a Matlab interface to be used by the application developed.
Resumo:
Lethal chromosomal frequencies were obtained from three Drosophila subobscura samples from the Mt. Avala (Serbia) population in September 2003 (0.218), June 2004 (0.204) and September 2004 (0.250). These values and those from other Balkan populations studied previously (Petnica, Kamariste, Zanjic and Djerdap) were used to analyze the possible effect of population, year, month and altitude above sea level on lethal chromosomal frequencies. According to ANOVAS no effect were observed. Furthermore, the lethal frequencies of the Balkan populations did not vary according to latitude. This is probably due to the relative proximity and high gene flow between these populations. From a joint study of all the Palearctic D. subobscura populations so far analyzed, it can be deduced that the Balkan populations are located in the central area of the species distribution. Finally, it seems that lethal chromosomal frequencies are a consequence of the genetic structure of the populations.
Resumo:
Lethal chromosomal frequencies were obtained from three Drosophila subobscura samples from the Mt. Avala (Serbia) population in September 2003 (0.218), June 2004 (0.204) and September 2004 (0.250). These values and those from other Balkan populations studied previously (Petnica, Kamariste, Zanjic and Djerdap) were used to analyze the possible effect of population, year, month and altitude above sea level on lethal chromosomal frequencies. According to ANOVAS no effect were observed. Furthermore, the lethal frequencies of the Balkan populations did not vary according to latitude. This is probably due to the relative proximity and high gene flow between these populations. From a joint study of all the Palearctic D. subobscura populations so far analyzed, it can be deduced that the Balkan populations are located in the central area of the species distribution. Finally, it seems that lethal chromosomal frequencies are a consequence of the genetic structure of the populations.
Resumo:
This paper presents a model of the Stokes emission vector from the ocean surface. The ocean surface is described as an ensemble of facets with Cox and Munk's (1954) Gram-Charlier slope distribution. The study discusses the impact of different up-wind and cross-wind rms slopes, skewness, peakedness, foam cover models and atmospheric effects on the azimuthal variation of the Stokes vector, as well as the limitations of the model. Simulation results compare favorably, both in mean value and azimuthal dependence, with SSM/I data at 53° incidence angle and with JPL's WINDRAD measurements at incidence angles from 30° to 65°, and at wind speeds from 2.5 to 11 m/s.
Resumo:
Psychophysical studies suggest that humans preferentially use a narrow band of low spatial frequencies for face recognition. Here we asked whether artificial face recognition systems have an improved recognition performance at the same spatial frequencies as humans. To this end, we estimated recognition performance over a large database of face images by computing three discriminability measures: Fisher Linear Discriminant Analysis, Non-Parametric Discriminant Analysis, and Mutual Information. In order to address frequency dependence, discriminabilities were measured as a function of (filtered) image size. All three measures revealed a maximum at the same image sizes, where the spatial frequency content corresponds to the psychophysical found frequencies. Our results therefore support the notion that the critical band of spatial frequencies for face recognition in humans and machines follows from inherent properties of face images, and that the use of these frequencies is associated with optimal face recognition performance.
Resumo:
The aim of this project is to accomplish an application software based on Matlab to calculate the radioelectrical coverage by surface wave of broadcast radiostations in the band of Medium Wave (WM) all around the world. Also, given the location of a transmitting and a receiving station, the software should be able to calculate the electric field that the receiver should receive at that specific site. In case of several transmitters, the program should search for the existence of Inter-Symbol Interference, and calculate the field strenght accordingly. The application should ask for the configuration parameters of the transmitter radiostation within a Graphical User Interface (GUI), and bring back the resulting coverage above a map of the area under study. For the development of this project, it has been used several conductivity databases of different countries, and a high-resolution elevation database (GLOBE). Also, to calculate the field strenght due to groundwave propagation, it has been used ITU GRWAVE program, which must be integrated into a Matlab interface to be used by the application developed.
Resumo:
Els continguts de la memòria es divideixen en dues parts fonamentals, precedides d’una breu explicació on s’introdueix al lector en el tema; primer s’exposen les bases d’un ressonador simple FBAR, d’on s’obtenen equacions de control vitals, i seguidament es plantegen les bases per a un ressonador apilat SCR, derivades de l’estudi previ d’un ressonador simple. La primera part fonamental del treball es centra en l’anàlisi d’un ressonador SCR. Aquest anàlisi es recolza sobre el punt de vista teòric dels paràmetres imatge, el nostre punt de sortida. Aquesta primera part és la més teòrica: obtenció i aplicació dels paràmetres imatge i obtenció dels elements discrets que conformen el circuit equivalent SCR, una xarxa de dos ports. Posteriorment, s’analitza què succeeix modificant els valors dels elements discrets sense variar determinats paràmetres imatge i finalment, es proposa una aproximació per a controlar determinades especificacions de disseny, com són l’ample de banda de transmissió de la xarxa i el factor de qualitat, en funció de les modificacions dels elements discrets. En la segona part s’analitzen, de forma qualitativa, xarxes compostes per diferents ressonadors apilats connectats en cascada. Aquest segon estudi es divideix en dues subparts. En la primera connectem N ressonadors idèntics, plantegem algunes equacions de control i analitzem les respostes. En la segona, es planteja la connexió de dos (N=2) ressonadors diferents amb freqüències de ressonància properes. Aquest segon anàlisi es també totalment qualitatiu, però ens aporta informació que amb la unió de N ressonadors iguals no aconseguíem. Finalitzant aquesta segona part, es planteja l’optimització dels resultats obtinguts per a N=2, mitjançant estructures N=3 ressonadors.
Resumo:
En la actualidad, la gran cantidad de aplicaciones que surgen dentro del ámbito de la radiofrecuencia hacen que el desarrollo de dispositivos dentro de este campo sea constante. Estos dispositivos cada vez requieren mayor potencia para frecuencias de trabajo elevadas, lo que sugiere abrir vías de investigación sobre dispositivos de potencia que ofrezcan los resultados deseados para altas frecuencias de operación (GHz). Dentro de este ámbito, el objetivo principal de este proyecto es el de realizar un estudio sobre este tipo de dispositivos, siendo el transistor LDMOS el candidato elegido para tal efecto, debido a su buen comportamiento en frecuencia para tensiones elevadas de funcionamiento.
Resumo:
Per a altes freqüències, les connexions poden tenir un paper rellevant. Atès que la velocitat de propagació dels senyals electromagnètics, c, en el cable no és infinita, el voltatge i el corrent al llarg del cable varien amb el temps. Per tant, amb l’objectiu de reproduir el comportament elèctric de dispositius nanoelectrònics a freqüències de THz, en aquest treball hem estudiat la regió activa del dispositiu nanoelectrònic i les seves connexions, en un sistema global complex. Per a aquest estudi hem utilitzat un nou concepte de dispositiu anomenat Driven Tunneling Device (DTD). Per a les connexions, hem plantejat el problema a partir de tot el conjunt de les equacions de Maxwell, ja que per a les freqüències i longituds de cable considerats, la contribució del camp magnètic és també important. En particular, hem suposat que la propagació que és dóna en el cable és una propagació transversal electromagnètica (TEM). Un cop definit el problema hem desenvolupat un programa en llenguatge FORTRAN que amb l'algoritme de diferències finites soluciona el sistema global. La solució del sistema global s'ha aplicat a una configuració particular de DTD com a multiplicador de freqüència per tal de discutir quins paràmetres de les connexions permet maximitzar la potència real que pot donar el DTD.
Resumo:
Para medir la capacidad de autorreconocimiento en el espejo en primates no humanos, el procedimiento usualmente utilizado consiste en registrar la frecuencia de comportamientos autodirigidos y autorreferidos. Los resultados obtenidos muestran una alta variabilidad entre sujetos pertenecientes a la misma especie. Este tipo de diferencias individuales no han podido ser explicadas. La hipótesis de trabajo establecer si pueden ser consecuencia de diferencias en el tiempo de atención al espejo. En la primera parte, se registró la cantidad de tiempo que los sujetos prestan atención al espejo y la cantidad de indicadores de autorreconocimiento que muestran. Los individuos que muestran mayores tiempos de atención también muestran frecuencias más altas de indicadores de autorreconocimiento, de acuerdo con una relación lineal entre ambas variables. En la segunda parte, se enriqueció el espejo para provocar un incremento del tiempo de atención en todos los sujetos. La frecuencia de indicadores de autorreconocimiento crece en comparación con una condición control. Los resultados demuestran que la frecuencia absoluta de indicadores de autorreconocimiento está fuertemente afectada por el tiempo de atención al espejo en sujetos de las mismas especies. Un análisis ad hoc. de los datos revela que la frecuencia relativa de conductas de autorreconocimiento sobre el número total de conductas está sólo ligeramente influida por el tiempo de atención y es independiente del nivel de actividad global y, por tanto, podría ser una medida más robusta de autorreconocimiento. De acuerdo a los resultados, los cambios en el tiempo de atención podrían explicar parte de la variabilidad intraespecífica hallada en los estudios de autorreconocimiento en el espejo. Las posibles implicaciones para las diferencias interespecíficas han de ser exploradas en diferentes estudios. Los experimentos han sido realizados en el Parque Zoológico de Barcelona de Febrero de 2007 a Julio de 2007. El proyecto ha tenido una duración global de 14 meses.
Resumo:
Durant els últims anys la demanda de filtres pas banda de ràdio freqüència, de reduïdes dimensions, lleugers i d'elevades prestacions destinats a sistemes de comunicacions inalàmbriques s'ha incrementat de forma significativa. Aquests sistemes principalment són els sistemes de telefonia mòbil de tercera generació UMTS y el sistema de navegació GPS. Els filtres actuals, basats en ressonadors SAW (Surface Acoustic Wave), tenen unes dimensions reduïdes però estan limitats en freqüència (3 GHz) i la seva tecnologia no és compatible amb les tecnologies estàndards de circuits integrats. Per aquestes raons s'espera que els filtres basats en ressonadors BAW (Bulk Acoustic Wave) substitueixin als SAW. Els dos tenen dimensions similars, però els filtres BAW poden funcionar a freqüències superiors a 3 GHz, poden treballar amb nivells de potència majors, i és important destacar el fet que la seva tecnologia és compatible amb les tecnologies estàndards de circuits integrats. La investigació en l'àmbit dels filtres BAW s'ha centrat en millorar els processos tecnològics i la qualitat dels materials, però s'ha treballat poc en l'adaptació de les tècniques sistemàtiques de disseny de filtres a les particularitats d'aquesta tecnologia, per tant el principal objectiu d'aquest treball és presentar mètodes sistemàtics per al disseny de filtres BAW, centrant-se en l'estudi d’estructures apilades.
Resumo:
En este informe se estudia cómo es posible utilizar redes de sensores inalámbricos (WSN), para la localización de determinados eventos. Se hace un estudio previo de cómo una red de sensores puede llegar a estar sincronizada de una manera cooperativa, interactuando todos los sensores de la red entre sí. Primero se realiza el estudio para la sincronización de dos sensores con frecuencias diferentes, viéndose los parámetros que intervienen para que esta sincronización se realice con éxito, y también los efectos que en ella se produce al añadirle ruido. Seguidamente, se realiza el estudio para la sincronización de redes de N sensores, de manera que interactúen entre ellos de forma cooperativa. Se observan las características de la sincronización cuando todos los sensores llegan a consenso y, después, se busca la forma para que el consenso tienda hacia un valor determinado por mutuo acuerdo de los sensores. Finalmente, a partir de las características obtenidas en el consenso de N sensores, se realiza una aplicación práctica para la localización de eventos por medio del consenso de estas redes de sensores inalámbricos.
Resumo:
Report for the scientific sojourn carried out at the Université Catholique de Louvain, Belgium, from March until June 2007. In the first part, the impact of important geometrical parameters such as source and drain thickness, fin spacing, spacer width, etc. on the parasitic fringing capacitance component of multiple-gate field-effect transistors (MuGFET) is deeply analyzed using finite element simulations. Several architectures such as single gate, FinFETs (double gate), triple-gate represented by Pi-gate MOSFETs are simulated and compared in terms of channel and fringing capacitances for the same occupied die area. Simulations highlight the great impact of diminishing the spacing between fins for MuGFETs and the trade-off between the reduction of parasitic source and drain resistances and the increase of fringing capacitances when Selective Epitaxial Growth (SEG) technology is introduced. The impact of these technological solutions on the transistor cut-off frequencies is also discussed. The second part deals with the study of the effect of the volume inversion (VI) on the capacitances of undoped Double-Gate (DG) MOSFETs. For that purpose, we present simulation results for the capacitances of undoped DG MOSFETs using an explicit and analytical compact model. It monstrates that the transition from volume inversion regime to dual gate behaviour is well simulated. The model shows an accurate dependence on the silicon layer thickness,consistent withtwo dimensional numerical simulations, for both thin and thick silicon films. Whereas the current drive and transconductance are enhanced in volume inversion regime, our results show thatintrinsic capacitances present higher values as well, which may limit the high speed (delay time) behaviour of DG MOSFETs under volume inversion regime.
Resumo:
We investigate the transition to synchronization in the Kuramoto model with bimodal distributions of the natural frequencies. Previous studies have concluded that the model exhibits a hysteretic phase transition if the bimodal distribution is close to a unimodal one, due to the shallowness the central dip. Here we show that proximity to the unimodal-bimodal border does not necessarily imply hysteresis when the width, but not the depth, of the central dip tends to zero. We draw this conclusion from a detailed study of the Kuramoto model with a suitable family of bimodal distributions.