102 resultados para Staffordshire pottery
em Consorci de Serveis Universitaris de Catalunya (CSUC), Spain
Resumo:
This paper explores analytically the contemporary pottery-making community of Pereruela (north-west Spain) that produces cooking pots from a mixture of red clay and kaolin. Analyses by different techniques (XRF, NAA, XRD, SEM and petrography) showed an extremely high variability for cooking ware pottery produced in a single production centre, by the same technology and using local clays. The main source of chemical variation is related to the use of different red clays and the presence of non-normally distributed inclusions of monazite. These two factors induce a high chemical variability, not only in the output of a single production centre, but even in the paste of a single pot, to an extent to which chemical compositions from one"workshop", or even one"pot", could be classified as having different provenances. The implications for the chemical characterization and for provenance studies of archaeological ceramics are addressed.
Resumo:
The approaches of comparative studies and profile measurements, often used in order to detect post-depositional alterations of ceramics, have been applied simultaneously to two sets of Roman pottery, both of which include altered individuals. As analytical techniques, Neutron Activation Analysis and X-Ray Diffraction have been used. Both approaches lead to substantially different results. This shows that they detect different levels of alteration and should complement each other rather than being used exclusively. For the special process of a glassy phase decomposition followed by a crystallization of the Na-zeolite analcime, the results suggest that it changes high-fired calcareous pottery rapidly, and so fundamentally that the results of various archaeometric techniques can be severely disturbed.
Resumo:
In luminescence dating, the potassium concentration significantly contributes to the dose rate value in the age estimation. Within this study, fine-grain thermoluminescence dating has been applied on sherds of calcareous pottery of known age, excavated at a Roman site in Mallorca, Spain. For those of the samples that showed signs of severe potassium leaching, according to chemical and mineralogical examination, the thermoluminescence analysis provided overestimated dates. By using the known archaeological age of the samples, a corrected dose rate value can be estimated which provides the potassium concentration averaged for the burial period. Finally, a step-like model can then be used to estimate the fraction of the burial period after which most of the alteration effects took place.
Resumo:
A very accurate archaeological dating of a Roman site in NE Spain (El Vila-sec) was made based on the typology of pottery artifacts. Three different phases were identifi ed with activity ranging from the mid- 1st century BC to the early-3rd century AD. Analyses of bricks from kilns at El Vila-sec produced data on their stored archaeomagnetic vector. These data were compared with the secular variation curve for the Iberian Peninsula and the SCHA.DIF.3K regional archaeomagnetic model. Both, the reference curve and the model, produced probability distributions for the final period of use for two kilns from the second archaeological phase that were not used during the third phase. At a 95% con fidence level, both time distributions cover a wide chronological range including the presumed archaeological age. Both the Iberian secular variation curve and the SCHA.DIF.3K regional model proved to be suitable models for dating the site, although on their own they do not produce a single unambiguous solution. This archaeomagnetic approach could also be applied to neighbouring archaeological sites that have an imprecise archaeological age.
Resumo:
Recent studies provided new data about late Roman imports (ARS, amphorae, lamps) in the coast of Hispania Tarraconensis. Concerning urban contexts (the ancient towns of Barcino, Tarraco and others) and rural settlements, the data allow us to identify the imports and the economic trends of the region from the 4th to the late 6th /early 7th centuries. We hope this paper to be an interpretative work of synthesis about the economic relationship between town and country in Catalonia and Northern Comunidad Valenciana in the Late Antiquity.
Resumo:
One of the most important reference groups for Mycenaean pottery is the Mycenae/Berbati (MB). In several studies, a second group has been identified (MBKR). The chemical compositions were similar to MB, but with important differences in the Na, K and Rb contents. The present study suggests that these differences are due to selective alteration and contamination processes that are indirectly determined by the original firing temperature. Therefore, groups MB and MBKR should be considered as a single reference group.
Resumo:
The study of technology transfer in pottery production to the periphery of the Mycenaean world has been addressed by considering two different areas, southern Italy and central Macedonia. Technological features such as ceramic paste, decoration and firing have been determined for different ceramic groups established according to provenance criteria. The studies of technology and provenance have been performed following an archaeometric approach, using neutron activation analysis, petrographic analysis, X-ray diffraction and scanning electron microscopy. The results have revealed the existence of two different models. On the one hand, southern Italy seems to exhibit a more organized pottery production, which follows a Mycenaean-like technology, while in central Macedonia production is probably more varied, being based in part on the technology of the local tradition.
Resumo:
Majolica pottery was the most characteristic tableware produced in Europe during the Medieval and Renaissance periods. Because of the prestige and importance attributed to this ware, Spanish majolica was imported in vast quantities into the Americas during the Spanish Colonial period. A study of Spanish majolica was conducted on a set of 186 samples from the 10 primary majolica production centres on the Iberian Peninsula and 22 sherds from two early colonial archaeological sites on the Canary Islands. The samples were analysed by neutron activation analysis (NAA), and the resulting data were interpreted using an array of multivariate statistical approaches. Our results show a clear discrimination between different production centres, allowing a reliable provenance attribution of the sherds from the Canary Islands.
Resumo:
Article que descriu i analitza un fragment d'una gran gerra ceràmica amb decoració grafitada al damunt de la paret externa procedent del poblat ibèric de Sant Julià de Ramis, situat en el límit nord-oriental del Pla de Girona
Resumo:
L'existència d'una aula USEE ha de permetre la inclusió dels alumnes amb NEE en un entorn majoritàriament ordinari. El present treball és una aproximació a l'educació inclusiva, les seves dificultats i aplicacions a través d'una experiència pràctica en un institut al voltant de la seva aula USEE. Les tasques pràctiques realitzades estan dividides en dos grans blocs: per una banda la recollida d'informació per a la identificació i l'anàlisi dels grau d'inclusió dels alumnes i del funcionament general del centre i per altra banda, una intervenció a la pròpia aula USEE a través d'un taller de ceràmica, el qual em va permetre valorar el sentiment de pertinença dels alumnes i treballar amb ells temes com l'autoconcepte, l'aprenentatge constructiu, les habilitats socials i les estratègies d'aprenentatge. He pogut constatar com una USEE és un recurs facilitador del model inclusiu si es donen algunes condicions fonamentals com aquelles que afecten a la cultura de centre. Finalment, el treball aporta algunes idees per orientar el centre cap a una millora en la seva cultura inclusiva.
Resumo:
Aquest article presenta un estudi detallat de peces ceràmiques que pertanyen al tipus ceràmic conegut com derivada de la sigil·lata paleocristiana (D.S.P.), obrada al migdia de la Gàl·lia des de molt a final del segle IV fins ben entrat el VI i exportada per tota la costa de la Mediterrània occidental
Resumo:
A problem in the archaeometric classification of Catalan Renaissance pottery is the fact, thatthe clay supply of the pottery workshops was centrally organized by guilds, and thereforeusually all potters of a single production centre produced chemically similar ceramics.However, analysing the glazes of the ware usually a large number of inclusions in the glaze isfound, which reveal technological differences between single workshops. These inclusionshave been used by the potters in order to opacify the transparent glaze and to achieve a whitebackground for further decoration.In order to distinguish different technological preparation procedures of the single workshops,at a Scanning Electron Microscope the chemical composition of those inclusions as well astheir size in the two-dimensional cut is recorded. Based on the latter, a frequency distributionof the apparent diameters is estimated for each sample and type of inclusion.Following an approach by S.D. Wicksell (1925), it is principally possible to transform thedistributions of the apparent 2D-diameters back to those of the true three-dimensional bodies.The applicability of this approach and its practical problems are examined using differentways of kernel density estimation and Monte-Carlo tests of the methodology. Finally, it istested in how far the obtained frequency distributions can be used to classify the pottery
Resumo:
El projecte de recerca ha analitzat la complexitat ètnica, social i de gènere de l’assentament colonial d’Empúries a partir d’un exhaustiu estudi contextual dels materials ceràmics d’ús quotidià provinents de diferents sectors excavats als anys vuitanta a la Neàpolis empuritana (N-7000, N-5000 i N-1000). Aquests sectors datats els segles V i IV a.C., corresponen a un moment en el qual s’està construint una identitat colonial diferenciada en l’espai emporità. La comparació dels aixovars domèstics usats quotidianament pels habitants d’aquest tres sectors situats en punts distants de la Neàpolis mostra que estem davant d’un assentament colonial molt heterogeni, on conflueixen materialitats, tradicions tecnològiques i pràctiques quotidianes iberes, gregues i híbrides. Els estudis de materials confirmen que no va existir una segregació espacial entre poblacions d’origen grec i iber en aquest assentament i suggereixen la cohabitació de gent –tant d’homes com de dones- d’origen grec i iber a les diferents àrees estudiades d’aquest assentament portuari. En el registre material ceràmic de totes les zones estudiades s’observa un predomini dels productes ceràmics de tradició grega (colonials o àtics) en els serveis de taula, però no així en els estris utilitzats a la cuina, que són majoritàriament de tradició ibera. També els materials ceràmics relacionats amb l’emmagatzematge domèstic i amb el transport i el comerç (àmfores) són predominantment ibers. Aquest patró suggereix que els ibers que van cohabitar amb els grecs al port emporità no van assumir en tots els casos posicions subalternes, sinó que tingueren un rol rellevant en la gestió econòmica i comercial d’aquest espai portuari.
Resumo:
Des del segon quart del s. I aC i, especialment, durant el regnat d’August, es va desenvolupar a l’antiga província Tarraconensis un sistema productiu centrat en l’explotació agrària vitivinícola amb una finalitat clarament comercial. La majoria d’assentament vitivinícoles es troben emplaçats al litoral català, associats de vegades a figlinae que fabricaven les àmfores per al transport i comerç de l’excedent vinícola. No obstant, a l’àrea del Vallès Occidental i del Baix Llobregat es troben una sèrie de vil•les vinculades a la producció de vi i a la fabricació d’àmfores que han proporcionat restes molt significatives sobre la contribució d’aquesta zona a l’expansió econòmica de la província. La caracterització arqueològica i arqueomètrica d’un gran nombre d’àmfores procedents de diversos tallers ceràmics situats al Vallès Occidental i al Baix Llobregat, utilitzant diverses tècniques d’anàlisi química, mineralògica i petrogràfica, ha portat a establir quins tipus d’àmfores es van fabricar a cada taller i de quina manera. S’han identificat alguns dels processos tecnològics de la cadena operativa: la selecció i processat de les matèries primeres per conformar la pasta procedents, generalment, de l’àrea on es troba cada centre de producció, el modelatge, l’assecat i la cocció de les peces. En alguns dels casos analitzats, s’ha identificat quins tipus de contenidors van ser importants a l’establiment i la seva provinença. La integració d’aquests resultats en la base de dades analítica que disposa l’ERAAUB ha permès avaluar el grau d’estandardització dels processos tecnològics en aquesta àrea. La contrastació final amb les dades històriques i arqueològiques contribueix al coneixement arqueològic de les àmfores vinàries de la Tarraconensis i, a través d’elles, al coneixement de les societats que les van fabricar, comercialitzar i utilitzar.
Resumo:
A prior long-term and complex evaluation of the already available data on the geophysical prospecting during the first season work carried out at 2006, at the archaeological site of Tchinguiz Tepe of Termez, took place to decide the strategy to follow during the campaign of 2007. This previous evaluation of the information, on one hand, leaded to the decision to increase the geophysical prospecting at Tchinguiz Tepe, on the other hand, to decide the exact location of areas where the archaeological interventions.would carry out. The main objective at the beginning of this new season was to crosscheck the reliabilityof the measurements and, at the same time, to establish the unknown up to the present archaeologicaland chronological sequence of Tchinguiz Tepe. Meanwhile, the geophysical prospecting also wasextended to the outskirts of the city were the localisation of an unknown up to now Buddhist Monasterywas possible.