Ultrasonic and LIDAR sensors for electronic canopy characterization in vineyards: advances to improve pesticide application methods

Canopy characterization is a key factor to improve pesticide application methods in tree crops and vineyards. Development of quick, easy and efficient methods to determine the fundamental parameters used to characterize canopy structure is thus an important need. In this research the use of ultrasonic and LIDAR sensors have been compared with the traditional manual and destructive canopy measurement procedure. For both methods the values of key parameters such as crop height, crop width, crop volume or leaf area have been compared. Obtained results indicate that an ultrasonic sensor is an appropriate tool to determine the average canopy characteristics, while a LIDAR sensor provides more accuracy and detailed information about the canopy. Good correlations have been obtained between crop volume (CVU) values measured with ultrasonic sensors and leaf area index, LAI (R2 = 0.51). A good correlation has also been obtained between the canopy volume measured with ultrasonic and LIDAR sensors (R2 = 0.52). Laser measurements of crop height (CHL) allow one to accurately predict the canopy volume. The proposed new technologies seems very appropriate as complementary tools to improve the efficiency of pesticide applications, although further improvements are still needed.

Percepción del riesgo de los agroquímicos en la localidad de Basavilbaso, Entre Ríos

El modelo agrario argentino actual se basa en el monocultivo de la soja para la exportación. Este cultivo aumentó de forma masiva a partir de la entrada de la soja transgénica resistente al herbicida glifosato, en los 90. Los plaguicidas han representado el gran sostén del crecimiento de la producción agropecuaria argentina. Debido al uso creciente que están teniendo y a la proximidad de los cultivos a los pueblos, los habitantes empiezan a percibir las prácticas de manejo y aplicación de plaguicidas como un riesgo para su salud y el medio ambiente de la zona. El clima de incertidumbre acerca de los impactos de los agroquímicos se percibe en las áreas productoras de soja, convirtiéndose en un conflicto entre expertos y población local. Con el estudio de este riesgo, del modo en que es percibido por la población y de los factores que causan dicha percepción, se ha observado que los problemas que generan la elevada percepción son principalmente las malas prácticas en la aplicación de los agroquímicos, la ausencia de regulación del organismo de control y la incertidumbre sobre los efectos que dichos productos pueden causar.

A note on the application of integrals involving cyclic products kernels

A l'estadística de processos estocàstics i camps aleatoris, una funció de moments o un cumulant d'un estimador de la funció de correlació o de la densitat espectral sovint pot contenir una integral amb un producte cíclic de nuclis. En aquest treball es defineix i s'investiga aquesta classe d'integrals i es demostra la desigualtat de Young-Hölder que permet estudiar el comportament asimptòtic de les esmentades integrals en la situació quan els nuclis depenen d'un pàràmetre. Es considera una aplicació al problema d'estimació de la funció de resposta en un sistema de Volterra.

Periodic orbits near a heteroclinic loop formed by one dimensional orbit and a 2-dimensional manifold: application to the charged collinear 3-body problem

The paper is devoted to the study of a type of differential systems which appear usually in the study of some Hamiltonian systems with 2 degrees of freedom. We prove the existence of infinitely many periodic orbits on each negative energy level. All these periodic orbits pass near the total collision. Finally we apply these results to study the existence of periodic orbits in the charged collinear 3–body problem.

Parametric and semiparametric estimation of sample selection models: an empirical application to the female labour force in Portugal

This comment corrects the errors in the estimation process that appear in Martins (2001). The first error is in the parametric probit estimation, as the previously presented results do not maximize the log-likelihood function. In the global maximum more variables become significant. As for the semiparametric estimation method, the kernel function used in Martins (2001) can take on both positive and negative values, which implies that the participation probability estimates may be outside the interval [0,1]. We have solved the problem by applying local smoothing in the kernel estimation, as suggested by Klein and Spady (1993).

Are one factor logarithmic volatility models useful to fit the features of financial data? An application to microsoft data.

This paper provides empirical evidence that continuous time models with one factor of volatility, in some conditions, are able to fit the main characteristics of financial data. It also reports the importance of the feedback factor in capturing the strong volatility clustering of data, caused by a possible change in the pattern of volatility in the last part of the sample. We use the Efficient Method of Moments (EMM) by Gallant and Tauchen (1996) to estimate logarithmic models with one and two stochastic volatility factors (with and without feedback) and to select among them.

Can genetic algorithms explain experimental anomalies? An application to common property resources

It is common to find in experimental data persistent oscillations in the aggregate outcomes and high levels of heterogeneity in individual behavior. Furthermore, it is not unusual to find significant deviations from aggregate Nash equilibrium predictions. In this paper, we employ an evolutionary model with boundedly rational agents to explain these findings. We use data from common property resource experiments (Casari and Plott, 2003). Instead of positing individual-specific utility functions, we model decision makers as selfish and identical. Agent interaction is simulated using an individual learning genetic algorithm, where agents have constraints in their working memory, a limited ability to maximize, and experiment with new strategies. We show that the model replicates most of the patterns that can be found in common property resource experiments.

A proposal for a new specification for a conditionally heteroskedastic variance model: the Quadratic Moving-Average Conditional Heteroskedasticity and an application to the D. Mark-U.S. dollar Exchange Rate

Ever since the appearance of the ARCH model [Engle(1982a)], an impressive array of variance specifications belonging to the same class of models has emerged [i.e. Bollerslev's (1986) GARCH; Nelson's (1990) EGARCH]. This recent domain has achieved very successful developments. Nevertheless, several empirical studies seem to show that the performance of such models is not always appropriate [Boulier(1992)]. In this paper we propose a new specification: the Quadratic Moving Average Conditional heteroskedasticity model. Its statistical properties, such as the kurtosis and the symmetry, as well as two estimators (Method of Moments and Maximum Likelihood) are studied. Two statistical tests are presented, the first one tests for homoskedasticity and the second one, discriminates between ARCH and QMACH specification. A Monte Carlo study is presented in order to illustrate some of the theoretical results. An empirical study is undertaken for the DM-US exchange rate.

Hausman tests for inefficient estimators: application to demand for health care service (revised)

The Hausman (1978) test is based on the vector of differences of two estimators. It is usually assumed that one of the estimators is fully efficient, since this simplifies calculation of the test statistic. However, this assumption limits the applicability of the test, since widely used estimators such as the generalized method of moments (GMM) or quasi maximum likelihood (QML) are often not fully efficient. This paper shows that the test may easily be implemented, using well-known methods, when neither estimator is efficient. To illustrate, we present both simulation results as well as empirical results for utilization of health care services.

An input-output analysis of the "key" sectors in CO2 emissions from a production perspective: an application to the spanish economy

Here we present an approach that allows the identification of the "key" productive sectors responsible for CO2 emission. For this purpose, we develop an input–output methodology from a supply perspective. We focus on the impact of an increase in the value-added of the different productive sectors on total CO2 emissions and we identify the productive sectors responsible for the increase in CO2 emissions when there is an increase in the income of the economy. The approach shows the contribution of the various sectors to CO2 emission from a production perspective and allows us to identify the sectors that deserve more consideration for mitigation policies. This analysis is complementary to the input–output analysis from a demand perspective. The methodology is applied to the Spanish economy.

Lp-solutions to BSDEs with super-linear growth coefficient. Application to degenerate semilinear PDEs.

We consider multidimensional backward stochastic differential equations (BSDEs). We prove the existence and uniqueness of solutions when the coefficient grow super-linearly, and moreover, can be neither locally Lipschitz in the variable y nor in the variable z. This is done with super-linear growth coefficient and a p-integrable terminal condition (p & 1). As application, we establish the existence and uniqueness of solutions to degenerate semilinear PDEs with superlinear growth generator and an Lp-terminal data, p & 1. Our result cover, for instance, the case of PDEs with logarithmic nonlinearities.

Model-based diagnosis system: application to constructed wetlands

Report for the scientific sojourn carried out at the Model-based Systems and Qualitative Reasoning Group (Technical University of Munich), from September until December 2005. Constructed wetlands (CWs), or modified natural wetlands, are used all over the world as wastewater treatment systems for small communities because they can provide high treatment efficiency with low energy consumption and low construction, operation and maintenance costs. Their treatment process is very complex because it includes physical, chemical and biological mechanisms like microorganism oxidation, microorganism reduction, filtration, sedimentation and chemical precipitation. Besides, these processes can be influenced by different factors. In order to guarantee the performance of CWs, an operation and maintenance program must be defined for each Wastewater Treatment Plant (WWTP). The main objective of this project is to provide a computer support to the definition of the most appropriate operation and maintenance protocols to guarantee the correct performance of CWs. To reach them, the definition of models which represent the knowledge about CW has been proposed: components involved in the sanitation process, relation among these units and processes to remove pollutants. Horizontal Subsurface Flow CWs are chosen as a case study and the filtration process is selected as first modelling-process application. However, the goal is to represent the process knowledge in such a way that it can be reused for other types of WWTP.

Effects of competition over quality-adjusted price indexes: an application to the Spanish automobile market

Using a newly constructed data set, we calculate quality-adjusted price indexes after estimating hedonic price regressions from 1988 to 2004 in the Spanish automobile market. The increasing competition was favoured by the removal of trade restrictions and the special plans for the renewal of the Spanish automobile fleet. We find that the increasing degree of competition during those years led to an overall drop in automobile prices by 20 percent which implied considerable consumer gains thanks to higher market efficiency. Additionally, our results indicate that loyalty relevance and discrepancies in automobile reliability declined during those years. This is captured.

An application of MSIASM to Chinese exosomatic energy metabolism

The methodology of Multi-Scale Integrated The methodology of Multi-Scale Integrated Analysis of Societal Metabolism (MSIASM) is applied to analyze the Chinese economy. This paper presents four tasks: (i) identifying a set of benchmarks that makes it possible to compare various characteristics of the Chinese economy with those of other country groups and the world (level) average; (ii) explaining the differences over the selected set of benchmarks, by looking at the characteristics of the various sub-sectors of the Chinese economy; (iii) understanding existing trends and future feasible future development paths for China by studying the existence of reciprocal constraints between the whole economy and its sub-sectors; and (iv) examining plausible future scenarios of development.

PIM place & ghost application

Actualment, el Servei d'Informàtica de l'Escola d'Enginyeries (SIEE) s'enfronta a dos problemes: l'augment del nombre d'alumnes, mantenint el mateix número d'ordinadors per fer les pràctiques i, d'altra banda, el també creixent nombre d'aplicacions que s'han desenvolupat i es desenvolupen per resoldre les necessitats generades pels mateixos alumnes. Aquest projecte neix amb la voluntat de solucionar aquests problemes, creant per un costat un aula de màquines virtuals i per altra banda crear un aplicatiu web, que servirà de framework i contenidor de futures aplicacions, on es pugui connectar de manera senzilla amb les màquines virtuals.