The second law of thermodynamics and the global climate system : A review of the maximum entropy production principle

The long-term mean properties of the global climate system and those of turbulent fluid systems are reviewed from a thermodynamic viewpoint. Two general expressions are derived for a rate of entropy production due to thermal and viscous dissipation (turbulent dissipation) in a fluid system. It is shown with these expressions that maximum entropy production in the Earth s climate system suggested by Paltridge, as well as maximum transport properties of heat or momentum in a turbulent system suggested by Malkus and Busse, correspond to a state in which the rate of entropy production due to the turbulent dissipation is at a maximum. Entropy production due to absorption of solar radiation in the climate system is found to be irrelevant to the maximized properties associated with turbulence. The hypothesis of maximum entropy production also seems to be applicable to the planetary atmospheres of Mars and Titan and perhaps to mantle convection. Lorenz s conjecture on maximum generation of available potential energy is shown to be akin to this hypothesis with a few minor approximations. A possible mechanism by which turbulent fluid systems adjust themselves to the states of maximum entropy production is presented as a selffeedback mechanism for the generation of available potential energy. These results tend to support the hypothesis of maximum entropy production that underlies a wide variety of nonlinear fluid systems, including our planet as well as other planets and stars

Innovative LIDAR 3D dynamic measurement system to estimate fruit-tree leaf area

In this work, a LIDAR-based 3D Dynamic Measurement System is presented and evaluated for the geometric characterization of tree crops. Using this measurement system, trees were scanned from two opposing sides to obtain two three-dimensional point clouds. After registration of the point clouds, a simple and easily obtainable parameter is the number of impacts received by the scanned vegetation. The work in this study is based on the hypothesis of the existence of a linear relationship between the number of impacts of the LIDAR sensor laser beam on the vegetation and the tree leaf area. Tests performed under laboratory conditions using an ornamental tree and, subsequently, in a pear tree orchard demonstrate the correct operation of the measurement system presented in this paper. The results from both the laboratory and field tests confirm the initial hypothesis and the 3D Dynamic Measurement System is validated in field operation. This opens the door to new lines of research centred on the geometric characterization of tree crops in the field of agriculture and, more specifically, in precision fruit growing.

The role of causal links in performance measurement models

Abstract Purpose: Several well-known managerial accounting performance measurement models rely on causal assumptions. Whilst users of the models express satisfaction and link them with improved organizational performance, academic research, of the realworld applications, shows few reliable statistical associations. This paper provides a discussion on the"problematic" of causality in a performance measurement setting. Design/methodology/approach: This is a conceptual study based on an analysis and synthesis of the literature from managerial accounting, organizational theory, strategic management and social scientific causal modelling. Findings: The analysis indicates that dynamic, complex and uncertain environments may challenge any reliance upon valid causal models. Due to cognitive limitations and judgmental biases, managers may fail to trace correct cause-and-effect understanding of the value creation in their organizations. However, even lacking this validity, causal models can support strategic learning and perform as organizational guides if they are able to mobilize managerial action. Research limitations/implications: Future research should highlight the characteristics necessary for elaboration of convincing and appealing causal models and the social process of their construction. Practical implications: Managers of organizations using causal models should be clear on the purposes of their particular models and their limitations. In particular, difficulties are observed in specifying detailed cause and effect relations and their potential for communicating and directing attention. They should therefore construct their models to suit the particular purpose envisaged. Originality/value: This paper provides an interdisciplinary and holistic view on the issue of causality in managerial accounting models.

Sistema de indicadores para la gestión sostenible de un destino turístico: aplicación a la Costa Brava centro

Strategic management is based upon a performance measurement system that allows gearing decision making towards accomplishing the established objectives.In a changing economic situation, the measurement of the effects of tourism is fundamental in order to know the efficiency and sustainability of that industry and of the territory in which takes place its activity. We propose a performance measurement system for the sustainable management of a tourism destination, so it will support the adoption of public policies and their follow-up, and as an instrument that will promote the responsible participation of the stakeholders with stakes in the destination. In accordance with the guidelines of the Agenda for a sustainable and competitive European tourism, we design a system based on the identification of the axes over which hinges the success of the management of tourism destinations, taking into account the long-term sustainability of this activity. We position the performance measurement system, and especially the balanced scorecard, as a support tool for the strategic planning of destinations. To the extent that this is possible, the performance measures are selected and structured according to the patterns of the balanced scorecard. Finally, we apply the conceptual model to the central Costa Brava

Research development of terahertz imaging systems

The electromagnetic radiation at a terahertz frequencies (from 0.1 THz to 10 THz) is situated in the frequency band comprised between the optical band and the radio band. The interest of the scientific community in this frequency band has grown up due to its large capabilities to develop innovative imaging systems. The terahertz waves are able to generate extremely short pulses that achieve good spatial resolution, good penetration capabilities and allow to identify microscopic structures using spectral analysis. The work carried out during the period of the grant has been based on the developement of system working at the aforementioned frequency band. The main system is based on a total power radiometer working at 0.1 THz to perform security imaging. Moreover, the development of this system has been useful to gain knowledge in the behavior of the component systems at this frequency band. Moreover, a vectorial network analyzer has been used to characterize materials and perform active raster imaging. A materials measurement system has been designed and used to measure material properties as permittivity, losses and water concentration. Finally, the design of a terahertz time-domain spectrometer (THz-TDS) system has been started. This system will allow to perform tomographic measurement with very high penetration resolutions while allowing the spectral characterization of the sample material. The application range of this kind of system is very wide: from the identification of cancerous tissues of a skin to the characterization of the thickness of a painted surface of a car.

Caracterización de materiales en banda W

Para medir los coeficientes de transmisión y reflexión, S21 y S11, de diferentes materiales o muestras planas, se usa un sistema de toma de medidas en espacio libre operando banda W (75 – 110 GHz). Usando estos parámetros, S21 y S11, podemos calcular la permitividad dieléctrica relativa compleja (Er ) y la permeabilidad magnética relativa compleja (μr) mediante un proceso llamado NRW (Nicolson-Ross-Weir). El sistema para medir consiste en dos antenas de bocina, una transmisora y otra receptora, dos espejos con los que obtenemos una onda plana para medir las propiedades del material y un ordenador o dispositivo que calcula los resultados. Este dispositivo requiere de calibración para la obtención de resultados óptimos. Dicho sistema se puede simular de manera ideal con un software llamado ADS (Assistance Design System) para el estudio y comparación de grosores, permitividades dieléctricas relativas y permeabilidades magnéticas relativas de los materiales en función de la frecuencia.

Bibliotecaris de recerca en un entorn virtual: noves habilitats, nous serveis

En aquest article es posen de manifest tant les noves funcions adquirides pels bibliotecaris de recerca de la UOC com les noves competències que requereix aquest perfil professional, partint de l'experiència de la Biblioteca Virtual (BV) de la UOC. En un context de creació d'unitats de bibliometria, la BV de la UOC també ha trobat la seva manera d'integrar-se dins la Universitat a través dels seus estudis bibliomètrics i altres serveis de suport a la recerca. Un grup de bibliotecaris de recerca dóna suport als investigadors des de l'inici del procés de recerca fins a l'avaluació de la seva producció científica i, d'altra banda, també dóna suport en l'anàlisi de dades bibliomètriques per a la presa de decisions estratègiques de la Universitat.

Bibliotecarios de investigación en un entorno virtual: nuevas habilidades, nuevos servicios

En aquest article es posen de manifest tant les noves funcions adquirides pels bibliotecaris de recerca de la UOC com les noves competències que requereix aquest perfil professional, partint de l'experiència de la Biblioteca Virtual (BV) de la UOC. En un context de creació d'unitats de bibliometria, la BV de la UOC també ha trobat la seva manera d'integrar-se dins la Universitat a través dels seus estudis bibliomètrics i altres serveis de suport a la recerca. Un grup de bibliotecaris de recerca dóna suport als investigadors des de l'inici del procés de recerca fins a l'avaluació de la seva producció científica i, d'altra banda, també dóna suport en l'anàlisi de dades bibliomètriques per a la presa de decisions estratègiques de la Universitat.

Research librarians in a virtual environment : new skills, new services

This paper highlights both the new functions taken on by UOC research librarians and the new skills that this professional profile requires, based on the experience of the UOC Virtual Library. By setting up a series of bibliometric units, the Library has been able to integrate itself into the University through bibliometric studies and other research support services. A group of research librarians provides support to researchers from the start of the research process to the assessment of their scientific output. They also provide support for the University's strategic decision-making through the analysis of bibliometric data.

Research librarians in a virtual environment : new skills, new services

This poster highlights both the new functions taken on by UOC research librarians and the new skills that this professional profile requires, based on the experience of the UOC Virtual Library. By setting up a series of bibliometric units, the Library has been able to integrate itself into the University through bibliometric studies and other research support services. A group of research librarians provides support to researchers from the start of the research process to the assessment of their scientific output. They also provide support for the University's strategic decision-making through the analysis of bibliometric data.

Behavioral aspects of investment fund's markets: are good managers lucky or skilled?

It is generally accepted that financial markets are efficient in the long run a lthough there may be some deviations in the short run. It is also accepted that a good portfolio manager is the one who beats the market persistently along time, this type of manager could not exist if markets were perfectly efficient According to this in a pure efficient market we should find that managers know that they can not beat the market so they would undertake only pure passive management strategies. Assuming a certain degree of inefficiency in the short run, a market may show some managers who tr y to beat the market by undertaking active strategies. From Fama’s efficient markets theory we can state that these active managers may beat the market occasionally although they will not be able to enhance significantly their performance in the long run. On the other hand, in an inefficient market it would be expected to find a higher level of activity related with the higher probability of beating the market. In this paper we follow two objectives: first, we set a basis to analyse the level of efficiency in an asset invest- ment funds market by measuring performance, strategies activity and it’s persistence for a certain group of funds during the period of study. Second, we analyse individual performance persistence in order to determine the existence of skilled managers. The CAPM model is taken as theoretical background and the use of the Sharpe’s ratio as a suitable performance measure in a limited information environment leads to a group performance measurement proposal. The empiri- cal study takes quarterly data from 1999-2007 period, for the whole population of the Spanish asset investment funds market, provided by the CNMV (Comisión Nacional del Mercado de Valores). This period of study has been chosen to ensure a wide enough range of efficient market observation so it would allow us to set a proper basis to compare with the following period. As a result we develop a model that allows us to measure efficiency in a given asset mutual funds market, based on the level of strategy’s activity undertaken by managers. We also observe persistence in individual performance for a certain group of funds

Creation and Validation of Chronojump-Boscosystem: A Free Tool to Measure Vertical Jumps

Measuring the height of the vertical jump is an indicator of the strength and power of the lower body. The technological tools available to measure the vertical jump are black boxes and are not open to third-party verification or adaptation. We propose the creation of a measurement system called Chronojump-Boscosystem, consisting of open hardware and free software. Methods: A microcontroller was created and validated using a square wave generator and an oscilloscope. Two types of contact platforms were developed using different materials. These platforms were validated by the minimum pressure required for activation at different points by a strain gauge, together with the on/off time of our platforms in respect of the Ergojump-Boscosystem platform by a sample of 8 subjects performing submaximal jumps with one foot on each platform. Agile methodologies were used to develop and validate the software. Results: All the tools fall under the free software / open hardware guidelines and are, in that sense, free. The microcontroller margin of error is 0.1%. The validity of the fiberglass platform is 0.95 (ICC). The management software contains nearly 113.000 lines of code and is available in 7 languages.

Measuring gait using a ground laser range sensor

This paper describes a mesurement system designed to register the displacement of the legs using a two-dimensional laser range sensor with a scanning plane parallel to the ground and extract gait parameters. In the proposed methodology, the position of the legs is estimated by fitting two circles with the laser points that define their contour and the gait parameters are extracted applying a step-line model to the estimated displacement of the legs to reduce uncertainty in the determination of the stand and swing phase of the gait. Results obtained in a range up to 8 m shows that the systematic error in the location of one static leg is lower than 10 mm with and standard deviation lower than 8 mm; this deviation increases to 11 mm in the case of a moving leg. The proposed measurement system has been applied to estimate the gait parameters of six volunteers in a preliminary walking experiment.

Real-time tree-foliage surface estimation using a ground laser scanner

The optimization of most pesticide and fertilizer applications is based on overall grove conditions. In this work we measurements. Recently, Wei [9, 10] used a terrestrial propose a measurement system based on a ground laser scanner to LIDAR to measure tree height, width and volume developing estimate the volume of the trees and then extrapolate their foliage a set of experiments to evaluate the repeatability and surface in real-time. Tests with pear trees demonstrated that the accuracy of the measurements, obtaining a coefficient of relation between the volume and the foliage can be interpreted as variation of 5.4% and a relative error of 4.4% in the linear with a coefficient of correlation (R) of 0.81 and the foliar estimation of the volume but without real-time capabilities. surface can be estimated with an average error less than 5 %.

Measuring oscillating walking paths with a LIDAR

This work describes the analysis of different walking paths registered using a Light Detection And Ranging (LIDAR) laser range sensor in order to measure oscillating trajectories during unsupervised walking. The estimate of the gait and trajectory parameters were obtained with a terrestrial LIDAR placed 100 mm above the ground with the scanning plane parallel to the floor to measure the trajectory of the legs without attaching any markers or modifying the floor. Three different large walking experiments were performed to test the proposed measurement system with straight and oscillating trajectories. The main advantages of the proposed system are the possibility to measure several steps and obtain average gait parameters and the minimum infrastructure required. This measurement system enables the development of new ambulatory applications based on the analysis of the gait and the trajectory during a walk.