Enabling dCache to use preexistent mass storage systems

A mesura que la investigació depèn cada vegada més dels computadors, l'emmagatzematge de dades comença a convertir-se en un recurs escàs per als projectes, i suposa una gran part del cost total. Alguns projectes intenten resoldre aquest problema emprant emmagatzament distribuït. És doncs necessari que alguns centres proveeixin de grans quantitats d'emmagatzematge massiu de baix cost basat en cintes magnètiques. L'inconvenient d'aquesta solució és que el rendiment disminueix, particularment a l'hora de tractar-se de grans quantitats d'arxius petits. El nostre objectiu és crear un híbrid entre un sistema d'alt cost i rendiment basat en discs, i un de baix cost i rendiment basat en cintes. Per això, unirem dCache, un sistema d'emmagatzematge distribuït, amb Castor, un sistema d'emmagatzematge jeràrquic, creant sistemes de fitxers virtuals que contindran grans quantitats d'arxius petits per millorar el rendiment global del sistema.

Optical correlation by use of partial phase-only modulation with VGA liquid-crystal displays

The development of liquid-crystal panels for use in commercial equipment has been aimed at improving the pixel resolution and the display efficiency. These improvements have led to a reduction in the thickness of such devices, among other outcomes, that involves a loss in phase modulation. We propose a modification of the classical phase-only filter to permit displays in VGA liquid-crystal panels with a constant amplitude modulation and less than a 2¿(PI) phase modulation. The method was tested experimentally in an optical setup.

Construcción y explotación de un almacén de datos de planificación hidrológica

Este documento es la memoria del trabajo de final de carrera (TFC) del área de almacenes de datos, dentro de los estudios de Ingeniería Técnica en Informática de Gestión de la Universitat Oberta de Catalunya (UOC).El proyecto a desarrollar en dicho TFC versa sobre el diseño, implementación y explotación de un almacén de datos para la Confederación Hidrográfica del Noreste (CHNE). Partiendo de sus fuentes de datos construiremos un almacén de datos del cual poder obtener un conjunto de informes predefinidos, según las especificaciones del CHNE.

Redefinición de indicadores y planificación del proceso de recogida de datos de la Biblioteca Virtual de la Universitat Oberta de Catalunya

Pre-print.

Redefinición de indicadores y planificación del proceso de recogida de datos de la Biblioteca Virtual de la Universitat Oberta de Catalunya

Pre-print.

Sistemes encastats en temps real

Resum En l’actualitat, els sistemes electrònics de processament de dades són cada cop més significatius dins del sector industrial. Són moltes les necessitats que sorgeixen en el món dels sistemes d’autentificació, de l’electrònica aeronàutica, d’equips d’emmagatzemament de dades, de telecomunicacions, etc. Aquestes necessitats tecnològiques exigeixen ser controlades per un sistema fiable, robust, totalment dependent amb els esdeveniments externs i que compleixi correctament les restriccions temporals imposades per tal de que realitzi el seu propòsit d’una manera eficient. Aquí és on entren en joc els sistemes encastats en temps real, els quals ofereixen una gran fiabilitat, disponibilitat, una ràpida resposta als esdeveniments externs del sistema, una alta garantia de funcionament i una àmplia possibilitat d’aplicacions. Aquest projecte està pensat per a fer una introducció al món dels sistemes encastats, com també explicar el funcionament del sistema operatiu en temps real FreeRTOS; el qual utilitza com a mètode de programació l’ús de tasques independents entre elles. Donarem una visió de les seves característiques de funcionament, com organitza tasques mitjançant un scheduler i uns exemples per a poder dissenyar-hi aplicacions.

On the artificial creation of the EL2 center by means of boron implantation in gallium arsenide

In the present work, an analysis of the dark and optical capacitance transients obtained from Schottky Au:GaAs barriers implanted with boron has been carried out by means of the isothermal transient spectroscopy (ITS) and differential and optical ITS techniques. Unlike deep level transient spectroscopy, the use of these techniques allows one to easily distinguish contributions to the transients different from those of the usual deep trap emission kinetics. The results obtained show the artificial creation of the EL2, EL6, and EL5 defects by the boron implantation process. Moreover, the interaction mechanism between the EL2 and other defects, which gives rise to the U band, has been analyzed. The existence of a reorganization process of the defects involved has been observed, which prevents the interaction as the temperature increases. The activation energy of this process has been found to be dependent on the temperature of the annealing treatment after implantation, with values of 0.51 and 0.26 eV for the as‐implanted and 400 °C annealed samples, respectively. The analysis of the optical data has corroborated the existence of such interactions involving all the observed defects that affect their optical parameters

Effects of thresholding level variation in fringe binarization of multiobject joint transform correlation

It is possible to improve the fringe binarization method of joint transform correlation by choosing a suitable threshold level.

Utilización de pantallas de cristal líquido en un correlador de Vander Lugt

En este artículo se presenta un estudio cuya finalidad es analizar diferentes aspectos de la utilización de pantallas de cristal líquido, extraídas de un videoproyector, en montajes de reconocimiento de formas por correlación. Se analizan las condiciones de funcionamiento de las pantallas y sus posibles modos de configuración. Se estudian dos tipos de filtros de correlación, el filtro adaptado clásico y el de sólo fase, así como la manera de codificarlos en las pantallas. Finalmente, se presentan los resultados de una serie de realizaciones experimentales utilizando un correlador de VanderLugt y diferentes configuraciones de las pantallas. De todo ello se deducen las condiciones óptimas de funcionamiento del sistema.

Combinación de pantallas de cristal líquido para la modulación compleja de frentes de onda. Aplicación en reconstrucción de hologramas de Fresnel digitales.

En este trabajo se presentan distintas alternativas para obtener la modulación compleja completa de frentes de onda mediante la suma de la modulación introducida por dos pantallas de cristal líquido. Para los distintos métodos se presentan resultados simulados de reconstrucciones de hologramas de Fresnel digitales.

A Framework for Building Hypercubes Using MapReduce

The European Space Agency's Gaia mission will create the largest and most precise three dimensional chart of our galaxy (the Milky Way), by providing unprecedented position, parallax, proper motion, and radial velocity measurements for about one billion stars. The resulting catalogue will be made available to the scientific community and will be analyzed in many different ways, including the production of a variety of statistics. The latter will often entail the generation of multidimensional histograms and hypercubes as part of the precomputed statistics for each data release, or for scientific analysis involving either the final data products or the raw data coming from the satellite instruments. In this paper we present and analyze a generic framework that allows the hypercube generation to be easily done within a MapReduce infrastructure, providing all the advantages of the new Big Data analysis paradigmbut without dealing with any specific interface to the lower level distributed system implementation (Hadoop). Furthermore, we show how executing the framework for different data storage model configurations (i.e. row or column oriented) and compression techniques can considerably improve the response time of this type of workload for the currently available simulated data of the mission. In addition, we put forward the advantages and shortcomings of the deployment of the framework on a public cloud provider, benchmark against other popular solutions available (that are not always the best for such ad-hoc applications), and describe some user experiences with the framework, which was employed for a number of dedicated astronomical data analysis techniques workshops.

A Framework for Building Hypercubes Using MapReduce

The European Space Agency's Gaia mission will create the largest and most precise three dimensional chart of our galaxy (the Milky Way), by providing unprecedented position, parallax, proper motion, and radial velocity measurements for about one billion stars. The resulting catalogue will be made available to the scientific community and will be analyzed in many different ways, including the production of a variety of statistics. The latter will often entail the generation of multidimensional histograms and hypercubes as part of the precomputed statistics for each data release, or for scientific analysis involving either the final data products or the raw data coming from the satellite instruments. In this paper we present and analyze a generic framework that allows the hypercube generation to be easily done within a MapReduce infrastructure, providing all the advantages of the new Big Data analysis paradigmbut without dealing with any specific interface to the lower level distributed system implementation (Hadoop). Furthermore, we show how executing the framework for different data storage model configurations (i.e. row or column oriented) and compression techniques can considerably improve the response time of this type of workload for the currently available simulated data of the mission. In addition, we put forward the advantages and shortcomings of the deployment of the framework on a public cloud provider, benchmark against other popular solutions available (that are not always the best for such ad-hoc applications), and describe some user experiences with the framework, which was employed for a number of dedicated astronomical data analysis techniques workshops.

Ontología de ALUS

En este trabajo se describe una base de conocimiento de las ALU humanas. La ontología incorpora términos SO y GO y está orientada a describir el contexto genómico del conjunto de ALU. Para cada elemento ALU se almacenan el gen y transcrito más cercanos, así como su anotación funcional de acuerdo a GO, el estado de la cromatina circundante y los factores de transcripción presentes en la ALU. Se han incorporado reglas semánticas para facilitar el almacenamiento, consulta e integración de la información. La ontología de ALU es plenamente analizable mediante razonadores como Pellet y está parcialmente transferida a una wiki semántica.

Resistance Switching in Transparent Magnetic MgO Films

We have studied the abrupt and hysteretic changes of resistance in MgO-based capacitor devices. The switching behavior is discussed in terms of the formation and rupture of conduction filaments due to the migration of structural defects in the electric field, together with the redox events which affects the mobile carriers. The results presented in this paper suggest that MgO transparent films combining ferromagnetism and multilevel switching characteristics might pave the way for a new method for spintronic multibit data storage.

Reconstruction of Fresnel Holograms using partial wave front information

n this work we analyze the behavior of complex information in Fresnel domain taking into account the limited capability to display complex transmittance values of current liquid crystal devices, when used as holographic displays. In order to do this analysis we compute the reconstruction of Fresnel holograms at several distances using the different parts of the complex distribution (real and imaginary parts, amplitude and phase) as well as using the full complex information adjusted with a method that combines two configurations of the devices in an adding architecture. The RMS error between the amplitude of these reconstructions and the original amplitude is used to evaluate the quality of the information displayed. The results of the error analysis show different behavior for the reconstructions using the different parts of the complex distribution and using the combined method of two devices. Better reconstructions are obtained when using two devices whose configurations densely cover the complex plane when they are added. Simulated and experimental results are also presented.