64 resultados para Modern track process
em Consorci de Serveis Universitaris de Catalunya (CSUC), Spain
Resumo:
The need to move forward in the knowledge of the subatomic world has stimulated the development of new particle colliders. However, the objectives of the next generation of colliders sets unprecedented challenges to the detector performance. The purpose of this contribution is to present a bidimensional array based on avalanche photodiodes operated in the Geiger mode to track high energy particles in future linear colliders. The bidimensional array can function in a gated mode to reduce the probability to detect noise counts interfering with real events. Low reverse overvoltages are used to lessen the dark count rate. Experimental results demonstrate that the prototype fabricated with a standard HV-CMOS process presents an increased efficiency and avoids sensor blindness by applying the proposed techniques.
Resumo:
Wheat yield and grain nitrogen concentration (GNC; mg N/g grain) are frequently negatively correlated. In most growing conditions, this is mainly due to a feedback process between GNC and the number of grains/m2. In Mediterranean conditions, breeders may have produced cultivars with conservative grain set. The present study aimed at clarifying the main physiological determinants of grain nitrogen accumulation (GNA) in Mediterranean wheat and to analyse how breeding has affected them. Five field experiments were carried out in north-eastern Spain in the 2005/06 and 2006/ 07 growing seasons with three cultivars released at different times and an advanced line. Depending on the experiment, source-sink ratios during grain filling were altered by reducing grain number/m2 either through pre-anthesis shading (unshaded control or 0.75 shading only between jointing and anthesis) or by directly trimming the spikes after anthesis and before the onset of the effective grain filling period (un-trimmed control or spikes halved 7–10 days after anthesis). Grain nitrogen content (GN content ; mg N/grain) decreased with the year of release of the genotypes. As the number of grains/m2 was also increased by breeding there was a clear dilution effect on the amount of nitrogen allocated to each grain. However, the increase in GN content in old genotypes did not compensate for the loss in grain nitrogen yield (GNY) due to the lower number of grains/m2. GN content of all genotypes increased (increases ranged from 0.13 to 0.40 mg N/grain, depending on experiment and genotype) in response to the post-anthesis spike trimming or pre-anthesis shading. The degree of source-limitation for GNA increased with the year of release of the genotypes (and thus with increases in grain number/m2) from 0.22 (mean of the four manipulative experiments) in the oldest cultivar to 0.51 (mean of the four manipulative experiments) in the most modern line. It was found that final GN content depended strongly on the source-sink ratio established at anthesis between the number of grains set and the amount of nitrogen absorbed at this stage. Thus, Mediterranean wheat breeding that improved yield through increases in grain number/m2 reduced the GN content by diluting a rather limited source of nitrogen into more grains. This dilution effect produced by breeding was further confirmed by the reversal effect produced by grain number/m2 reductions due to either pre-anthesis shading or post-anthesis spike trimming.
Resumo:
In this paper we explore the effect of bounded rationality on the convergence of individual behavior toward equilibrium. In the context of a Cournot game with a unique and symmetric Nash equilibrium, firms are modeled as adaptive economic agents through a genetic algorithm. Computational experiments show that (1) there is remarkable heterogeneity across identical but boundedly rational agents; (2) such individual heterogeneity is not simply a consequence of the random elements contained in the genetic algorithm; (3) the more rational agents are in terms of memory abilities and pre-play evaluation of strategies, the less heterogeneous they are in their actions. At the limit case of full rationality, the outcome converges to the standard result of uniform individual behavior.
Resumo:
According to the account of the European Union (EU) decision making proposed in this paper, this is a bargaining process during which actors shift their policy positions with a view to reaching agreements on controversial issues.
Resumo:
This study focuses on identification and exploitation processes among Finnish design entrepreneurs (i.e. selfemployed industrial designers). More specifically, this study strives to find out what design entrepreneurs do when they create new ventures, how venture ideas are identified and how entrepreneurial processes are organized to identify and exploit such venture ideas in the given industrial context. Indeed, what does educated and creative individuals do when they decide to create new ventures, where do the venture ideas originally come from, and moreover, how are venture ideas identified and developed into viable business concepts that are introduced on the markets? From an academic perspective: there is a need to increase our understanding of the interaction between the identification and exploitation of emerging ventures, in this and other empirical contexts. Rather than assuming that venture ideas are constant in time, this study examines how emerging ideas are adjusted to enable exploitation in dynamic market settings. It builds on the insights from previous entrepreneurship process research. The interpretations from the theoretical discussion build on the assumption that the subprocesses of identification and exploitation interact, and moreover, they are closely entwined with each other (e.g. McKelvie & Wiklund, 2004, Davidsson, 2005). This explanation challenges the common assumption that entrepreneurs would first identify venture ideas and then exploit them (e.g. Shane, 2003). The assumption is that exploitation influences identification, just as identification influences exploitation. Based on interviews with design entrepreneurs and external actors (e.g. potential customers, suppliers and collaborators), it appears as identification and exploitation of venture ideas are carried out in close interaction between a number of actors, rather than alone by entrepreneurs. Due to their available resources, design entrepreneurs have a desire to focus on identification related activities and to find external actors that take care of exploitation related activities. The involvement of external actors may have a direct impact on decisionmaking and various activities along the processes of identification and exploitation, which is something that previous research does not particularly emphasize. For instance, Bhave (1994) suggests both operative and strategic feedback from the market, but does not explain how external parties are actually involved in the decisionmaking, and in carrying out various activities along the entrepreneurial process.
Resumo:
Este trabajo presenta una metodología para detectar y realizar el seguimiento de características faciales. En el primer paso del procedimiento se detectan caras mediante Adaboost con cascadas de clasificadores débiles. El segundo paso busca las características internas de la cara mediante el CSR, detectando zonas de interés. Una vez que estas características se capturan, un proceso de tracking basado en el descriptor SIFT, que hemos llamado pseudo-SIFT, es capaz de guardar información sobre la evolución de movimiento en las regiones detectadas. Además, un conjunto de datos públicos ha sido desarrollado con el propósito de compartirlo con otras investigaciones sobre detección, clasificación y tracking. Experimentos reales muestran la robustez de este trabajo y su adaptabilidad para trabajos futuros.
Resumo:
We give a survey of some recent results on Grothendieck duality. We begin with a brief reminder of the classical theory, and then launch into an overview of some of the striking developments since 2005.
Resumo:
This paper has three objectives. First, it aims at revealing the logic of interest rate setting pursued by monetary authorities of 12 new EU members. Using estimation of an augmented Taylor rule, we find that this setting was not always consistent with the official monetary policy. Second, we seek to shed light on the inflation process of these countries. To this end, we carry out an estimation of an open economy Philips curve (PC). Our main finding is that inflation rates were not only driven by backward persistency but also held a forward-looking component. Finally, we assess the viability of existing monetary arrangements for price stability. The analysis of the conditional inflation variance obtained from GARCH estimation of PC is used for this purpose. We conclude that inflation targeting is preferable to an exchange rate peg because it allowed decreasing the inflation rate and anchored its volatility.
Resumo:
ISAFRUIT is an integrated European Union Project focussed on increasing fruit consumption as a means to improve human health, through evaluating the fruit chain and addressing bottlenecks therein.The innovations which are being developed throughout the ISAFRUIT Project have been analysed to determine both the success factors and the obstacles in reaching the commercialisation stage. Only 9.58% of the deliverables planned within the Project were focussed on developing technological innovations.There is evidence, however, of successes in the development of new innovations arising from the ISAFRUIT Project, with several other potential innovations in the pipeline. Of the technologies identified, 67% are still at the “invention stage”; that is, the stage prior to bridging the so-called “valley of death”, the stage between an invention and an innovation. Those which are considered to have moved over the “valley of death” either had industry partners included in the Project, or had consulted with industry to ensure that the technology was relevant, or met a recognised industry need. Many of the technologies which made less progress did not have the same interactions with industry. A number of other issues were identified which prevented further progress towards innovation. The need for scientists to publish scientific papers, both for their career pathways and to increase their chances of future funding, was identified as one issue, although the filing of patents is now becoming more accepted and recognised. The patenting system is considered complex by many scientists and is not well-understood. Finally, agreements between partners on the sharing of intellectual property rights can cause a delay in the innovation process.
Resumo:
While much of the literature on immigrants' assimilation has focused on countries with a large tradition of receiving immigrants and with flexible labor markets, very little is known on how immigrants adjust to other types of host economies. With its severe dual labor market, and an unprecedented immigration boom, Spain presents a quite unique experience to analyze immigrations' assimilation process. Using data from the 2000 to 2008 Labor Force Survey, we find that immigrants are more occupationally mobile than natives, and that much of this greater flexibility is explained by immigrants' assimilation process soon after arrival. However, we find little evidence of convergence, especially among women and high skilled immigrants. This suggests that instead of integrating, immigrants occupationally segregate, providing evidence consistent with both imperfect substitutability and immigrants' human capital being under-valued. Additional evidence on the assimilation of earnings and the incidence of permanent employment by different skill levels also supports the hypothesis of segmented labor markets.
Resumo:
A study of the main types of coatings and its processes that modern industry commonly apply to prevent to the corrosion due to the environmental effects to energetic market pipelines have been done. Extracting main time and temperature range values, coating heat treatment recreation have been applied to x65 pipelines steel grade samples obtained from a pipe which was formed using UOE forming process. Experimental tensile tests and Charpy V‐Notch Impact test have been carried out for a deeply knowledge of the influence on the steel once this recreations are applied. The Yield Strength and toughness have been improved despite lower values in rupture strain and ductile‐brittle temperature transition have been obtained. Finite Element Method have been applied to simulate the entirely pipe cold bending process to predict the mechanical properties and behaviour of the pipe made from x65 steel grade under different conditions.