32 resultados para Mineral absorption
em Consorci de Serveis Universitaris de Catalunya (CSUC), Spain
Resumo:
Occurrence of polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) was evaluated in sepiolite as a widely employed binder and anti-caking agent for animal feed. Also, naturally contaminated kaolinitic clay was used for comparative purposes. Since sepiolite shows remarkable adsorption properties, particular interest was paid to the extraction steps as they become critical for the final determination of these pollutants in such matrixes. Furthermore, classical Soxhlet extraction using different extracting strategies as well as acid treatment were carried out with simultaneous liquid-liquid extraction. Results obtained depended on the extraction procedure applied. Acid treatment or Soxhlet extraction using a mixture of toluene:ethanol as solvent allowed to reach the minimum requirements of recovery rates. However, Soxhlet extraction using a mixture cyclohexane:toluene as extracting solvent did not allow to comply with minimum specifications for recovery. Significant differences were obtained in TEQ units when acid treatment was applied in comparison to Soxhlet extraction. This fact can be explained because the use of drastic acid conditions allows removing strongly adsorbed analytes which can be uniquely extracted after a total destruction of the crystalline structure of sepiolite. On the contrary, Soxhlet extraction was not able to destroy the structure of sepiolite and as a consequence the PCDDs/Fs were strongly adsorbed in the internal structure of the mineral. From biological point of view the availability of these toxicants constitutes a critical aspect playing an important role in the final decision choosing particular analytical procedures. Then, acid conditions in the digestive tract should be taken into account. In this scenario, a bioaccumulation study was conducted to evaluate the transference of PCDDs/PCDFs from the sepiolite into the animal tissues when fed with feed containing sepiolite. To this end, chickens were used as a model to examine the bioavailability of PCDDs/PCDFs. Four groups of chickens were exposed through their diet to a control feed, feed with 3% w/w sepiolite as additive, feed contaminated with PCDDs/PCDFs at concentration around 2.8 pg WHO-TEQ/g and feed with 2% of a contaminated kaolinitic clay (460 pg TEQ/g mineral). Livers of the four studied groups were analyzed throughout the exposure period. Results of this trial showed that the performance of broilers was not affected by the presence of dioxins at levels tested, and chickens did not show any abnormal behaviour. Dioxins intentionally added to the diet were absorbed and accumulated in the liver in a significant manner, whereas the PCDDs/Fs from sepiolite were not available for chickens since livers from broilers fed 3% sepiolite presented similar WHO-TEQ values than those from broilers fed control diet.
Resumo:
Treball de recerca realitzat per una alumna d’ensenyament secundari i guardonat amb un Premi CIRIT per fomentar l'esperit científic del Jovent l’any 2008. L’objectiu principal ha estat fer una reproducció a escala d’un frontal del romànic berguedà emprant pigments minerals. Sobre la base d’una recerca bibliogràfica exhaustiva, s’ha realitzat primer una aproximació teòrica amb l’objectiu de poder estudiar els pigments minerals des de diversos punts de vista: el científic, explicant la física, química i geologia del color; i l’artístic, explicant l’evolució dels pigments al llarg de la història de l’art –especialment en el Romànic català -. Paral•lelament, els estudis experimentals es van estructurar en quatre apartats: localització i recol•lecció de minerals, obtenció del pigment, elaboració de la pintura i reproducció del frontal romànic de Sant Andreu de Sagàs. Per tal de comprendre millor el procediment d’elaboració del frontal se’n va confeccionar un altre que es va dividir en quatre parts, corresponents als diferents passos que s’havien de seguir. El treball realitzat mostra que les dues grans branques del saber, l’art i la ciència, es troben íntimament relacionades. A més ha demostrat que gran part dels pigments que s’utilitzaven per elaborar les pintures romàniques del Berguedà provenien de l’entorn més directe, però en cas necessari s’utilitzaven minerals importats de terres llunyanes, com el cinabri. Les pintures elaborades amb pigments minerals tenen un alt valor afegit, ja que requereixen tot un procés de preparació molt llarg i laboriós.
Resumo:
Es realitza un estudi prospectiu observacional amb 158 dones postmenopàusiques diagnosticades d’hiperparatiroidisme primari. L’objectiu és descriure i analitzar l’evolució de la densitat mineral òssia d’aquestes dones després de ser sotmeses a tractament quirúrgic. Els resultats mostren que l’os més afectat en aquesta malaltia és l’os cortical, però el que més es recupera i de forma més ràpida després de la paratiroidectomia és l’os trabecular. Així mateix, les malaltes que tenen un hiperparatiroidisme més sever presenten una major recuperació de la densitat mineral òssia després de la cirurgia.
Resumo:
L’explotació minera, especialment la mineria metàl•lica, ha estat sempre associada ariscos de contaminació ambiental de sòls, aigües i vegetació, originats per l’activitatextractiva, les operacions de concentració dels minerals i pels emplaçaments de residusminers sense una gestió adequada. En molts casos els residus miners s’abocavendirectament a rius i rierols o s’acumulaven en piles pròximes a centres habitats iactivitats agrícoles. Concretament s’estudia els cas de les mines d’Osor. Donada la possible presència de quantitats elevades de metalls pesants en aquests sòlses decideix avaluar una tècnica de remediació de sòls lleugera com la fitoextracció. Lafitoextracció es basa en l’ús de plantes bioacumuladores que absorbeixen metalls delsòl. Aquesta tècnica permet una descontaminació del sòl no agressiva i de baix cost peròrequereix un tractament de llarga durada
Resumo:
During the second half of the nineteenth century a major mineral water bottling industry appeared in Catalonia which vigorously lasted until the first third of the 20th century. The fact that the industry appeared in Catalonia and in other parts of Europe and the United States almost at the same time and had not existed before can be explained by a series of factors which coincided in time. This situation encouraged producers to pack, transport and sell bottled water from their respective sources. Among these factors there is the rise of hygienism, very influential in Catalonia, the declining water quality due to industrialization, the increase in population density, the improvement in transport, the emergence of thermal tourism or the invention of better containers used to store water. This project aims to explain thoroughly all the mentioned factors, and to give some light to why, when and how the Catalan bottled water industry appeared.
Resumo:
Seasonal trends in littertall and potential mineral return were studied in two cork-oak forest sites in the northeastern Iberian peninsula. The estimated average litter production was 3.9.M- gy.e1ahar for one site and 4.6 .M- gy.e1ahar for the other; these figures are similar to those reported for holm-oak (Quercus ilex) forests in the same area. Seasonal litterfall patterns were typical of Mediterranean forest ecosystems. Leaves accounted for 46 to 78% of the total dry matter. Their annual weighted-average mineral composition was low in macronutrients (N 8-9; K 4-5; Mg 0.8-1.3; Ca 9-10 and P 0.4-1 m-)g.1g and relatively high in micronutrients such as Mn (2-2.2 m-)g.1g or Fe (0.3-0.4 m)-g..1g Minimum N and P concentrations were found during the growth period. Estimates of potential mineral return for an annual cycle were N 38-52, P 2.1-5.2, K 20-28, Ca 44-53 and Mg 5.4-5.0 k-,g.1ha depending on the site biomass and fertility
Resumo:
We developed a procedure that combines three complementary computational methodologies to improve the theoretical description of the electronic structure of nickel oxide. The starting point is a Car-Parrinello molecular dynamics simulation to incorporate vibrorotational degrees of freedom into the material model. By means ofcomplete active space self-consistent field second-order perturbation theory (CASPT2) calculations on embedded clusters extracted from the resulting trajectory, we describe localized spectroscopic phenomena on NiO with an efficient treatment of electron correlation. The inclusion of thermal motion into the theoretical description allowsus to study electronic transitions that, otherwise, would be dipole forbidden in the ideal structure and results in a natural reproduction of the band broadening. Moreover, we improved the embedded cluster model by incorporating self-consistently at the complete active space self-consistent field (CASSCF) level a discrete (or direct) reaction field (DRF) in the cluster surroundings. The DRF approach offers an efficient treatment ofelectric response effects of the crystalline embedding to the electronic transitions localized in the cluster. We offer accurate theoretical estimates of the absorption spectrum and the density of states around the Fermi level of NiO, and a comprehensive explanation of the source of the broadening and the relaxation of the charge transferstates due to the adaptation of the environment
Resumo:
The rigorous and transparent treatment of the effects of nuclear vibrational motion in two-photon absorption (TPA) was discussed. Perturbation formula for diatomic molecules were developed and applied to the X¹Σ+–A¹Π transition in CO. The analysis showed that the vibrations played an important role in TPA, just as their role in the calculation of conventional nonlinear optical (NLO) hyperpolarizabilities
Resumo:
The longwave emission of planetary atmospheres that contain a condensable absorbing gas in the infrared (i.e., longwave), which is in equilibrium with its liquid phase at the surface, may exhibit an upper bound. Here we analyze the effect of the atmospheric absorption of sunlight on this radiation limit. We assume that the atmospheric absorption of infrared radiation is independent of wavelength except within the spectral width of the atmospheric window, where it is zero. The temperature profile in radiative equilibrium is obtained analytically as a function of the longwave optical thickness. For illustrative purposes, numerical values for the infrared atmospheric absorption (i.e., greenhouse effect) and the liquid vapor equilibrium curve of the condensable absorbing gas refer to water. Values for the atmospheric absorption of sunlight (i.e., antigreenhouse effect) take a wide range since our aim is to provide a qualitative view of their effects. We find that atmospheres with a transparent region in the infrared spectrum do not present an absolute upper bound on the infrared emission. This result may be also found in atmospheres opaque at all infrared wavelengths if the fraction of absorbed sunlight in the atmosphere increases with the longwave opacity
Resumo:
The paper contrasts empirically the results of alternative methods for estimating thevalue and the depreciation of mineral resources. The historical data of Mexico andVenezuela, covering the period 1920s-1980s, is used to contrast the results of severalmethods. These are the present value, the net price method, the user cost method andthe imputed income method. The paper establishes that the net price and the user costare not competing methods as such, but alternative adjustments to different scenariosof closed and open economies. The results prove that the biases of the methods, ascommonly described in the theoretical literature, only hold under the most restrictedscenario of constant rents over time. It is argued that the difference between what isexpected to happen and what actually did happen is for the most part due to a missingvariable, namely technological change. This is an important caveat to therecommendations made based on these models.
Resumo:
Optical absorption spectra and transmission electron microscopy (TEM) observations on InGaAs/InP layers under compressive strain are reported. From the band¿gap energy dispersion, the magnitude of the strain inhomogeneities. Is quantified and its microscopic origin is analyzed in view of the layer microstructure. TEM observations reveal a dislocation network at the layer interface the density of which correlates with ¿¿. It is concluded that local variations of dislocation density are responsible for the inhomogeneous strain field together with another mechanism that dominates when the dislocation density is very low.