Using computational fluid dynamics to predict head losses in the auxiliary elements of a microirrigation sand filter

It is often assumed that total head losses in a sand filter are solely due to the filtration media and that there are analytical solutions, such as the Ergun equation, to compute them. However, total head losses are also due to auxiliary elements (inlet and outlet pipes and filter nozzles), which produce undesirable head losses because they increase energy requirements without contributing to the filtration process. In this study, ANSYS Fluent version 6.3, a commercial computational fluid dynamics (CFD) software program, was used to compute head losses in different parts of a sand filter. Six different numerical filter models of varying complexities were used to understand the hydraulic behavior of the several filter elements and their importance in total head losses. The simulation results show that 84.6% of these were caused by the sand bed and 15.4% were due to auxiliary elements (4.4% in the outlet and inlet pipes, and 11.0% in the perforated plate and nozzles). Simulation results with different models show the important role of the nozzles in the hydraulic behavior of the sand filter. The relationship between the passing area through the nozzles and the passing area through the perforated plate is an important design parameter for the reduction of total head losses. A reduced relationship caused by nozzle clogging would disproportionately increase the total head losses in the sand filter

Inverse Problems for multiple invariant curves

Planar polynomial vector fields which admit invariant algebraic curves, Darboux integrating factors or Darboux first integrals are of special interest. In the present paper we solve the inverse problem for invariant algebraic curves with a given multiplicity and for integrating factors, under generic assumptions regarding the (multiple) invariant algebraic curves involved. In particular we prove, in this generic scenario, that the existence of a Darboux integrating factor implies Darboux integrability. Furthermore we construct examples where the genericity assumption does not hold and indicate that the situation is different for these.

Aplicaciones Single Program Multiple Data (SPMD) en ambientes distribuidos

Un reto al ejecutar las aplicaciones en un cluster es lograr mejorar las prestaciones utilizando los recursos de manera eficiente, y este reto es mayor al utilizar un ambiente distribuido. Teniendo en cuenta este reto, se proponen un conjunto de reglas para realizar el cómputo en cada uno de los nodos, basado en el análisis de cómputo y comunicaciones de las aplicaciones, se analiza un esquema de mapping de celdas y un método para planificar el orden de ejecución, tomando en consideración la ejecución por prioridad, donde las celdas de fronteras tienen una mayor prioridad con respecto a las celdas internas. En la experimentación se muestra el solapamiento del computo interno con las comunicaciones de las celdas fronteras, obteniendo resultados donde el Speedup aumenta y los niveles de eficiencia se mantienen por encima de un 85%, finalmente se obtiene ganancias de los tiempos de ejecución, concluyendo que si se puede diseñar un esquemas de solapamiento que permita que la ejecución de las aplicaciones SPMD en un cluster se hagan de forma eficiente.

Price level convergence, purchasing power parity and multiple structural breaks: an application to US cities

This article provides a fresh methodological and empirical approach for assessing price level convergence and its relation to purchasing power parity (PPP) using annual price data for seventeen US cities. We suggest a new procedure that can handle a wide range of PPP concepts in the presence of multiple structural breaks using all possible pairs of real exchange rates. To deal with cross-sectional dependence, we use both cross-sectional demeaned data and a parametric bootstrap approach. In general, we find more evidence for stationarity when the parity restriction is not imposed, while imposing parity restriction provides leads toward the rejection of the panel stationar- ity. Our results can be embedded on the view of the Balassa-Samuelson approach, but where the slope of the time trend is allowed to change in the long-run. The median half-life point estimate are found to be lower than the consensus view regardless of the parity restriction.

Simulations of parasitic and intrinsic capacitances related to Multiple-Gate-Field-Effect Transistor architectures

Report for the scientific sojourn carried out at the Université Catholique de Louvain, Belgium, from March until June 2007. In the first part, the impact of important geometrical parameters such as source and drain thickness, fin spacing, spacer width, etc. on the parasitic fringing capacitance component of multiple-gate field-effect transistors (MuGFET) is deeply analyzed using finite element simulations. Several architectures such as single gate, FinFETs (double gate), triple-gate represented by Pi-gate MOSFETs are simulated and compared in terms of channel and fringing capacitances for the same occupied die area. Simulations highlight the great impact of diminishing the spacing between fins for MuGFETs and the trade-off between the reduction of parasitic source and drain resistances and the increase of fringing capacitances when Selective Epitaxial Growth (SEG) technology is introduced. The impact of these technological solutions on the transistor cut-off frequencies is also discussed. The second part deals with the study of the effect of the volume inversion (VI) on the capacitances of undoped Double-Gate (DG) MOSFETs. For that purpose, we present simulation results for the capacitances of undoped DG MOSFETs using an explicit and analytical compact model. It monstrates that the transition from volume inversion regime to dual gate behaviour is well simulated. The model shows an accurate dependence on the silicon layer thickness,consistent withtwo dimensional numerical simulations, for both thin and thick silicon films. Whereas the current drive and transconductance are enhanced in volume inversion regime, our results show thatintrinsic capacitances present higher values as well, which may limit the high speed (delay time) behaviour of DG MOSFETs under volume inversion regime.

The Multiple-partners assignment game with heterogeneous sales and multi-unit demands: competitive equilibria

A multiple-partners assignment game with heterogeneous sales and multiunit demands consists of a set of sellers that own a given number of indivisible units of (potentially many different) goods and a set of buyers who value those units and want to buy at most an exogenously fixed number of units. We define a competitive equilibrium for this generalized assignment game and prove its existence by using only linear programming. In particular, we show how to compute equilibrium price vectors from the solutions of the dual linear program associated to the primal linear program defined to find optimal assignments. Using only linear programming tools, we also show (i) that the set of competitive equilibria (pairs of price vectors and assignments) has a Cartesian product structure: each equilibrium price vector is part of a competitive equilibrium with all optimal assignments, and vice versa; (ii) that the set of (restricted) equilibrium price vectors has a natural lattice structure; and (iii) how this structure is translated into the set of agents' utilities that are attainable at equilibrium.

Behavior study of pipes after forming, coating and bending

A study of the main types of coatings and its processes that modern industry commonly apply to prevent to the corrosion due to the environmental effects to energetic market pipelines have been done. Extracting main time and temperature range values, coating heat treatment recreation have been applied to x65 pipelines steel grade samples obtained from a pipe which was formed using UOE forming process. Experimental tensile tests and Charpy V‐Notch Impact test have been carried out for a deeply knowledge of the influence on the steel once this recreations are applied. The Yield Strength and toughness have been improved despite lower values in rupture strain and ductile‐brittle temperature transition have been obtained. Finite Element Method have been applied to simulate the entirely pipe cold bending process to predict the mechanical properties and behaviour of the pipe made from x65 steel grade under different conditions.

Teaching foreign languages through translation: considering multiple intelligences

Aquest treball de recerca tracta de la relació existent entre pedagogia, traducció, llengües estrangeres i intel•ligències múltiples. El debat sobre si la traducció és una eina útil a la classe de llengües estrangeres és un tema actual sobre el qual molts investigadors encara indaguen. Estudis recents, però, han demostrat que qualsevol tasca de traducció -en la qual s’hi poden incloure treballs amb les diferents habilitats- és profitosa si la considerem un mitjà, no una finalitat en ella mateixa. Evidentment, l’ús de la traducció dins l’aula és avantatjosa, però també hem de tenir presents certs desavantatges d’aquesta aplicació. Un possible desavantatge podria ser la creença que, al principi, molta gent té referent a l’equivalència, paraula per paraula, d’una llengua vers una altra. Però després de presentar vàries tasques de traducció als estudiants, aquests poden arribar a controlar, fins i tot, les traduccions inconscients i poden assolir un cert nivell de precisió i flexibilitat que val la pena mencionar. Però l’avantatge principal és que s’enfronten a una activitat molt estesa dins la societat actual que combina dues llengües, la llengua materna i la llengua objecte d’estudi, per exemple. De tot això en podem deduir que utilitzar la llengua materna a la classe no s’ha de considerar un crim, com fins ara, sinó una virtut, evidentment si és emprada correctament. En aquest treball de recerca s’hi pot trobar una síntesi tant de les principals teories d’adquisició i aprenentatge de llengües com de les teories de traducció. A la pregunta de si les teories, tant de traducció com de llengües estrangeres, s’haurien d’ensenyar implícita o explícitament, es pot inferir que segons el nivell d’estudis on estiguin els aprenents els convindrà aprendre les teories explícitament o les aprendran, de totes maneres, implícitament. Com que qualsevol grup d’estudiants és heterogeni -és a dir que cada individu té un ritme i un nivell d’aprenentatge concret i sobretot cadascú té diferents estils de percepció (visual, auditiu, gustatiu, olfactiu, de moviment) i per tant diferents intel•ligències-, els professors ho han de tenir en compte a l’hora de planificar qualsevol programa d’actuació vers els alumnes. Per tant, podem concloure que les tasques o projectes de traducció poden ajudar als alumnes a aprendre millor, més eficaçment i a aconseguir un aprenentatge més significatiu.

Reduction in catheter-related bloodstream infections in critically ill patients through a multiple system intervention.

Els catéters venosos centrals són necessaris per al maneig del pacient crític però poden ser l´origen d´una bacteriemia. Aquest estudi prospectiu de cohort té com a objectiu determinar la utilitat de l´aplicació d´unes mesures bàsiques de prevenció per disminuir la incidència de bacteriemia associada a catéter. Els resultats de l´estudi confirmen que l´aplicació d´aquest sistema d´intervenció múltiple basat en l´evidencia redueix de forma significativa les bacteriemies associades a catéter a la nostra UCI.

AgShare : Building Community and Content with Multiple Partners

Michigan State University and OER Africa are creating a win-win collaboration of existing organizations for African publishing, localizing, and sharing of teaching and learning materials that fill critical resource gaps in African MSc agriculture curriculum. By the end of the 18-month planning and pilot initiative, African agriculture universities, faculty, students, researchers, NGO leaders, extension staff, and farmers will participate in building AgShare by demonstrating its benefits and outcomes and by building momentum and support for growth.

Coherent forecasting of multiple-decrement life tables: a test using Japanese cause of death data

Planners in public and private institutions would like coherent forecasts of the components of age-specic mortality, such as causes of death. This has been di cult toachieve because the relative values of the forecast components often fail to behave ina way that is coherent with historical experience. In addition, when the group forecasts are combined the result is often incompatible with an all-groups forecast. It hasbeen shown that cause-specic mortality forecasts are pessimistic when compared withall-cause forecasts (Wilmoth, 1995). This paper abandons the conventional approachof using log mortality rates and forecasts the density of deaths in the life table. Sincethese values obey a unit sum constraint for both conventional single-decrement life tables (only one absorbing state) and multiple-decrement tables (more than one absorbingstate), they are intrinsically relative rather than absolute values across decrements aswell as ages. Using the methods of Compositional Data Analysis pioneered by Aitchison(1986), death densities are transformed into the real space so that the full range of multivariate statistics can be applied, then back-transformed to positive values so that theunit sum constraint is honoured. The structure of the best-known, single-decrementmortality-rate forecasting model, devised by Lee and Carter (1992), is expressed incompositional form and the results from the two models are compared. The compositional model is extended to a multiple-decrement form and used to forecast mortalityby cause of death for Japan

A compositional data analysis package for R providing multiple approaches

”compositions” is a new R-package for the analysis of compositional and positive data.It contains four classes corresponding to the four different types of compositional andpositive geometry (including the Aitchison geometry). It provides means for computation,plotting and high-level multivariate statistical analysis in all four geometries.These geometries are treated in an fully analogous way, based on the principle of workingin coordinates, and the object-oriented programming paradigm of R. In this way,called functions automatically select the most appropriate type of analysis as a functionof the geometry. The graphical capabilities include ternary diagrams and tetrahedrons,various compositional plots (boxplots, barplots, piecharts) and extensive graphical toolsfor principal components. Afterwards, ortion and proportion lines, straight lines andellipses in all geometries can be added to plots. The package is accompanied by ahands-on-introduction, documentation for every function, demos of the graphical capabilitiesand plenty of usage examples. It allows direct and parallel computation inall four vector spaces and provides the beginner with a copy-and-paste style of dataanalysis, while letting advanced users keep the functionality and customizability theydemand of R, as well as all necessary tools to add own analysis routines. A completeexample is included in the appendix

Neptune: a hil simulator for multiple UUVs

This paper overviews the field of graphical simulators used for AUV development, presents the taxonomy of these applications and proposes a classification. It also presents Neptune, a multivehicle, real-time, graphical simulator based on OpenGL that allows hardware in the loop simulations

Estimating Gross Value Added (GVA) across multiple scales: theoretical approach and empirical validation

This paper presents an application of the Multi-Scale Integrated Analysis of Societal and Ecosystem Metabolism (MuSIASEM) approach to the estimation of quantities of Gross Value Added (GVA) referring to economic entities defined at different scales of study. The method first estimates benchmark values of the pace of GVA generation per hour of labour across economic sectors. These values are estimated as intensive variables –e.g. €/hour– by dividing the various sectorial GVA of the country (expressed in € per year) by the hours of paid work in that same sector per year. This assessment is obtained using data referring to national statistics (top down information referring to the national level). Then, the approach uses bottom-up information (the number of hours of paid work in the various economic sectors of an economic entity –e.g. a city or a province– operating within the country) to estimate the amount of GVA produced by that entity. This estimate is obtained by multiplying the number of hours of work in each sector in the economic entity by the benchmark value of GVA generation per hour of work of that particular sector (national average). This method is applied and tested on two different socio-economic systems: (i) Catalonia (considered level n) and Barcelona (considered level n-1); and (ii) the region of Lima (considered level n) and Lima Metropolitan Area (considered level n-1). In both cases, the GVA per year of the local economic entity –Barcelona and Lima Metropolitan Area – is estimated and the resulting value is compared with GVA data provided by statistical offices. The empirical analysis seems to validate the approach, even though the case of Lima Metropolitan Area indicates a need for additional care when dealing with the estimate of GVA in primary sectors (agriculture and mining).

Probabilistic models to assist maintenance of multiple instruments

The paper discusses maintenance challenges of organisations with a huge number of devices and proposes the use of probabilistic models to assist monitoring and maintenance planning. The proposal assumes connectivity of instruments to report relevant features for monitoring. Also, the existence of enough historical registers with diagnosed breakdowns is required to make probabilistic models reliable and useful for predictive maintenance strategies based on them. Regular Markov models based on estimated failure and repair rates are proposed to calculate the availability of the instruments and Dynamic Bayesian Networks are proposed to model cause-effect relationships to trigger predictive maintenance services based on the influence between observed features and previously documented diagnostics