Measuring sustained superior performance at the firm level

This paper proposes a two-dimensional Strategic Performance Measure (SPM) to evaluate the achievement of sustained superior performance. This proposal builds primarily on the fact that, under the strategic management perspective, a firm's prevalent objective is the pursuit of sustained superior performance. Three basic conceptual dimensions stem from this objective: relativity, sign dependence, and dynamism. These are the foundations of the SPM, which carries out a separate evaluation of the attained superior performance and of its sustainability over time. In contrast to existing measures of performance, the SPM provides: (i) a dynamic approach by considering the progress or regress in performance over time, and (ii) a cardinal measurement of performance differences and its changes over time. The paper also proposes an axiomatic framework that a measure of strategic performance should comply with to be theoretically and managerially sound. Finally, an empirical illustration of the Spanish banking sector during 1987-1999 is herein provided by discussing some relevant cases.

Measuring intergenerational earnings mobility in Spain: a selection-bias-free approach

This paper analyses intergenerational earnings mobility in Spain correcting for different selection biases. We address the co-residence selection problem by combining information from two samples and using the two-sample two-stage least square estimator. We find a small decrease in elasticity when we move to younger cohorts. Furthermore, we find a higher correlation in the case of daughters than in the case of sons; however, when we consider the employment selection in the case of daughters, by adopting a Heckman-type correction method, the diference between sons and daughters disappears. By decomposing the sources of earnings elasticity across generations, we find that the correlation between child's and father's occupation is the most important component. Finally, quantile regressions estimates show that the influence of the father's earnings is greater when we move to the lower tail of the offspring's earnings distribution, especially in the case of daughters' earnings.

Comparison of different devices for predicting the lean meat percentage of pig carcasses

Lean meat percentage (LMP) is the criterion for carcass classification and it must be measured on line objectively. The aim of this work was to compare the error of the prediction (RMSEP) of the LMP measured with the following different devices: Fat-O-Meat’er (FOM), UltraFOM (UFOM), AUTOFOM and -VCS2000. For this reason the same 99 carcasses were measured using all 4 apparatus and dissected according to the European Reference Method. Moreover a subsample of the carcasses (n=77) were fully scanned with a X-ray Computed Tomography equipment (CT). The RMSEP calculated with cross validation leave-one-out was lower for FOM and AUTOFOM (1.8% and 1.9%, respectively) and higher for UFOM and VCS2000 (2.3% for both devices). The error obtained with CT was the lowest (0.96%) in accordance with previous results, but CT cannot be used on line. It can be concluded that FOM and AUTOFOM presented better accuracy than UFOM and VCS2000.

Measuring peace. Initiatives, limitations and proposals. Seminar proceedings Barcelona, March 2010

These proceedings correspond to the international seminar “Measuring Peace. Initiatives, Limitations and Proposals” organized by the International Catalan Institute for Peace, which took place in Barcelona on the 4th and the 5th of March 2010. The Human Development Index is the most visible attempt over the last years to improve the statistical tools so that they offer results which are closer to social realities. In the field of Peace the attempts to create new measuring mechanisms have not been able to move beyond the negative conception of peace, which means that it has just been considered as an absence of violent conflicts. In this context, the international seminar organized by the ICIP was an attempt to compile recent contributions of different investigation centres which have focused in conceptualizing positive peace and new ways to measure it.

A new automated method versus continuous positive airway pressure method for measuring pressure-volume curves in patients with acute lung injury

Objective: To compare pressure–volume (P–V) curves obtained with the Galileo ventilator with those obtained with the CPAP method in patients with ALI or ARDS receiving mechanical ventilation. P–V curves were fitted to a sigmoidal equation with a mean R2 of 0.994 ± 0.003. Lower (LIP) and upper inflection (UIP), and deflation maximum curvature (PMC) points calculated from the fitted variables showed a good correlation between methods with high intraclass correlation coefficients. Bias and limits of agreement for LIP, UIP and PMC obtained with the two methods in the same patient were clinically acceptable.

Route optimization and customization using real geographical data in Android mobile devices

Nowadays, there are several services and applications that allow users to locate and move to different tourist areas using a mobile device. These systems can be used either by internet or downloading an application in concrete places like a visitors centre. Although such applications are able to facilitate the location and the search for points of interest, in most cases, these services and applications do not meet the needs of each user. This paper aims to provide a solution by studying the main projects, services and applications, their routing algorithms and their treatment of the real geographical data in Android mobile devices, focusing on the data acquisition and treatment to improve the routing searches in off-line environments.

Preventive medicine for epidemic outbreaks and risky behavior through mobile devices and ubiquitous computing

In this work, we have developed the first free software for mobile devices with the Android operating system that can preventively mitigate the number of contagions of sexually transmitted infections (STI), associated with risk behavior. This software runs in two modes. The normal mode allows the user to see the alerts and nearby health centers. The second mode enables the service to work in the background. This software reports the health risks, as well as the location of different test centers.

Measuring sustained superior performance at the firm level

This paper proposes a two-dimensional Strategic Performance Measure (SPM) to evaluate the achievement of sustained superior performance. This proposal builds primarily on the fact that, under the strategic management perspective, a firm's prevalent objective is the pursuit of sustained superior performance. Three basicconceptual dimensions stem from this objective: relativity, sign dependence, and dynamism. These are the foundations of the SPM, which carries out a separate evaluation of the attained superior performance and of its sustainability over time. In contrast to existing measures of performance, the SPM provides: (i) a dynamic approach by considering the progress or regress in performance over time, and (ii) a cardinal measurement of performance differences and its changes over time. The paper also proposes an axiomatic framework that ameasure of strategic performance should comply with to be theoretically and managerially sound. Finally, anempirical illustration of the Spanish banking sector during 1987-1999 is herein provided by discussing some relevant case

Measuring the child mortality impact of official aid for fighting infectious diseases, 2000-2010

Aid for fighting infectious and parasitic diseases has had a statistically significant role in the under-five mortality reduction in the last decade. Point estimates indicate a country average reduction of 1.4 deaths per thousand under fives live-born attributable to aid at its average level in 2000-2010. The effect would be an average drop of 3.3 in the under-five mortality rate at the aid levels of 2010. By components, a dollar per capita spent in fighting malaria has caused the largest average impact, statistically higher than a dollar per capita spent in STD/HIV control. We do not find statistically significant effects of other infectious disease aid, including aid for the control of tuberculosis.

Possible solution of some essential zero problems in compositional data analysis

One of the tantalising remaining problems in compositional data analysis lies in how to deal with data sets in which there are components which are essential zeros. By anessential zero we mean a component which is truly zero, not something recorded as zero simply because the experimental design or the measuring instrument has not been sufficiently sensitive to detect a trace of the part. Such essential zeros occur inmany compositional situations, such as household budget patterns, time budgets,palaeontological zonation studies, ecological abundance studies. Devices such as nonzero replacement and amalgamation are almost invariably ad hoc and unsuccessful insuch situations. From consideration of such examples it seems sensible to build up amodel in two stages, the first determining where the zeros will occur and the secondhow the unit available is distributed among the non-zero parts. In this paper we suggest two such models, an independent binomial conditional logistic normal model and a hierarchical dependent binomial conditional logistic normal model. The compositional data in such modelling consist of an incidence matrix and a conditional compositional matrix. Interesting statistical problems arise, such as the question of estimability of parameters, the nature of the computational process for the estimation of both the incidence and compositional parameters caused by the complexity of the subcompositional structure, the formation of meaningful hypotheses, and the devising of suitable testing methodology within a lattice of such essential zero-compositional hypotheses. The methodology is illustrated by application to both simulated and real compositional data

Energy dispersive X-Ray fluorescence : measuring elements in solid and liquid matrices

The subject of this project is about “Energy Dispersive X-Ray Fluorescence ” (EDXRF).This technique can be used for a tremendous variety of elemental analysis applications.It provides one of the simplest, most accurate and most economic analytical methods for thedetermination of the chemical composition of many types of materials.The purposes of this project are:- To give some basic information about Energy Dispersive X-ray Fluorescence.- To perform qualitative and quantitative analysis of different samples (water-dissolutions,powders, oils,..) in order to define the sensitivity and detection limits of the equipment.- To make a comprehensive and easy-to-use manual of the ‘ARL QUANT’X EnergyDispersive X-Ray Fluorescence’ apparatus

Evaluation of free libraries for visual recognition of art imagery on mobile devices

This paper describes a systematic research about free software solutions and techniques for art imagery computer recognition problem.

Indoor localisation with Android devices

This project analyses WiFiSLAM, an indoor positioning system for mobile phones that tries to estimate the position by analysing WiFi signals.

Non-invasive monitoring of diaphragmatic timing by means of surface contact sensors: an experimental study in dogs

Background: Non-invasive monitoring of respiratory muscle function is an area of increasing research interest, resulting in the appearance of new monitoring devices, one of these being piezoelectric contact sensors. The present study was designed to test whether the use of piezoelectric contact (non-invasive) sensors could be useful in respiratory monitoring, in particular in measuring the timing of diaphragmatic contraction.Methods: Experiments were performed in an animal model: three pentobarbital anesthetized mongrel dogs. The motion of the thoracic cage was acquired by means of a piezoelectric contact sensor placed on the costal wall. This signal is compared with direct measurements of the diaphragmatic muscle length, made by sonomicrometry. Furthermore, to assess the diaphragmatic function other respiratory signals were acquired: respiratory airflow and transdiaphragmatic pressure. Diaphragm contraction time was estimated with these four signals. Using diaphragm length signal as reference, contraction times estimated with the other three signals were compared with the contraction time estimated with diaphragm length signal.Results: The contraction time estimated with the TM signal tends to give a reading 0.06 seconds lower than the measure made with the DL signal (-0.21 and 0.00 for FL and DP signals, respectively), with a standard deviation of 0.05 seconds (0.08 and 0.06 for FL and DP signals, respectively). Correlation coefficients indicated a close link between time contraction estimated with TM signal and contraction time estimated with DL signal (a Pearson correlation coefficient of 0.98, a reliability coefficient of 0.95, a slope of 1.01 and a Spearman's rank-order coefficient of 0.98). In general, correlation coefficients and mean and standard deviation of the difference were better in the inspiratory load respiratory test than in spontaneous ventilation tests.Conclusion: The technique presented in this work provides a non-invasive method to assess the timing of diaphragmatic contraction in canines, using a piezoelectric contact sensor placed on the costal wall.

Pitfalls to Avoid when Measuring Institutions: Is 'Doing Business' Damaging Business?

Over recent years, both governments and international aid organizations have been devoting large amounts of resources to "simplifying" the procedures for setting up and formalizing firms. Many of these actions have focused on reducing the initial costs of setting up the firm, disregarding the more important role of business registers as a source of reliable information for judges, government departments and, above all, other firms. This reliable information is essential for reducing transaction costs in future dealings with all sorts of economic agents, both public and private. The priorities of reform policies should therefore be thoroughly reviewed, stressing the value of the legal institutions rather than trivializing them as is often the case.