Measuring intergenerational earnings mobility in Spain: a selection-bias-free approach

This paper analyses intergenerational earnings mobility in Spain correcting for different selection biases. We address the co-residence selection problem by combining information from two samples and using the two-sample two-stage least square estimator. We find a small decrease in elasticity when we move to younger cohorts. Furthermore, we find a higher correlation in the case of daughters than in the case of sons; however, when we consider the employment selection in the case of daughters, by adopting a Heckman-type correction method, the diference between sons and daughters disappears. By decomposing the sources of earnings elasticity across generations, we find that the correlation between child's and father's occupation is the most important component. Finally, quantile regressions estimates show that the influence of the father's earnings is greater when we move to the lower tail of the offspring's earnings distribution, especially in the case of daughters' earnings.

Labor supply response to international migration and remittances in the Republic of Haiti

The Republic of Haiti is the prime international remittances recipient country in the Latin American and Caribbean (LAC) region relative to its gross domestic product (GDP). The downside of this observation may be that this country is also the first exporter of skilled workers in the world by population size. The present research uses a zero-altered negative binomial (with logit inflation) to model households' international migration decision process, and endogenous regressors' Amemiya Generalized Least Squares method (instrumental variable Tobit, IV-Tobit) to account for selectivity and endogeneity issues in assessing the impact of remittances on labor market outcomes. Results are in line with what has been found so far in this literature in terms of a decline of labor supply in the presence of remittances. However, the impact of international remittances does not seem to be important in determining recipient households' labor participation behavior, particularly for women.

Estimation of lean meat content in pig carcasses using X-ray Computed Tomography and PLS regression

Lean meat percentage (LMP) is an important carcass quality parameter. The aim of this work is to obtain a calibration equation for the Computed Tomography (CT) scans with the Partial Least Square Regression (PLS) technique in order to predict the LMP of the carcass and the different cuts and to study and compare two different methodologies of the selection of the variables (Variable Importance for Projection — VIP- and Stepwise) to be included in the prediction equation. The error of prediction with cross-validation (RMSEPCV) of the LMP obtained with PLS and selection based on VIP value was 0.82% and for stepwise selection it was 0.83%. The prediction of the LMP scanning only the ham had a RMSEPCV of 0.97% and if the ham and the loin were scanned the RMSEPCV was 0.90%. Results indicate that for CT data both VIP and stepwise selection are good methods. Moreover the scanning of only the ham allowed us to obtain a good prediction of the LMP of the whole carcass.

A critical analysis of dimensions and curve fitting practice in economics

When dealing with sustainability we are concerned with the biophysical as well as the monetary aspects of economic and ecological interactions. This multidimensional approach requires that special attention is given to dimensional issues in relation to curve fitting practice in economics. Unfortunately, many empirical and theoretical studies in economics, as well as in ecological economics, apply dimensional numbers in exponential or logarithmic functions. We show that it is an analytical error to put a dimensional unit x into exponential functions ( a x ) and logarithmic functions ( x a log ). Secondly, we investigate the conditions of data sets under which a particular logarithmic specification is superior to the usual regression specification. This analysis shows that logarithmic specification superiority in terms of least square norm is heavily dependent on the available data set. The last section deals with economists’ “curve fitting fetishism”. We propose that a distinction be made between curve fitting over past observations and the development of a theoretical or empirical law capable of maintaining its fitting power for any future observations. Finally we conclude this paper with several epistemological issues in relation to dimensions and curve fitting practice in economics

Exploratory Factor Analysis of the contents and styles of irrational thoughts assessed by "The Attitudes and Beliefs Inventory"

The factor structure of a back translated Spanish version (Lega, Caballo and Ellis, 2002) of the Attitudes and Beliefs Inventory (ABI) (Burgess, 1990) is analyzed in a sample of 250 university students.The Spanish version of the ABI is a 48-items self-report inventory using a 5-point Likert scale that assesses rational and irrational attitudes and beliefs. 24-items cover two dimensions of irrationality: a) areas of content (3 subscales), and b) styles of thinking (4 subscales).An Exploratory Factor Analysis (Parallel Analysis with Unweighted Least Squares method and Promin rotation) was performed with the FACTOR 9.20 software (Lorenzo-Seva and Ferrando, 2013).The results reproduced the main four styles of irrational thinking in relation with the three specific contents of irrational beliefs. However, two factors showed a complex configuration with important cross-loadings of different items in content and style. More analyses are needed to review the specific content and style of such items.

Exploratory Factor Analysis of the contents and styles of irrational thoughts assessed by "The Attitudes and Beliefs Inventory"

The factor structure of a back translated Spanish version (Lega, Caballo and Ellis, 2002) of the Attitudes and Beliefs Inventory (ABI) (Burgess, 1990) is analyzed in a sample of 250 university students.The Spanish version of the ABI is a 48-items self-report inventory using a 5-point Likert scale that assesses rational and irrational attitudes and beliefs. 24-items cover two dimensions of irrationality: a) areas of content (3 subscales), and b) styles of thinking (4 subscales).An Exploratory Factor Analysis (Parallel Analysis with Unweighted Least Squares method and Promin rotation) was performed with the FACTOR 9.20 software (Lorenzo-Seva and Ferrando, 2013).The results reproduced the main four styles of irrational thinking in relation with the three specific contents of irrational beliefs. However, two factors showed a complex configuration with important cross-loadings of different items in content and style. More analyses are needed to review the specific content and style of such items.

Identification-commitment inventory (ICI-Model): confirmatory factor analysis and construct validity

The aim of this study is to confirm the factorial structure of the Identification-Commitment Inventory (ICI) developed within the frame of the Human System Audit (HSA) (Quijano et al. in Revist Psicol Soc Apl 10(2):27-61, 2000; Pap Psicól Revist Col Of Psicó 29:92-106, 2008). Commitment and identification are understood by the HSA at an individual level as part of the quality of human processes and resources in an organization; and therefore as antecedents of important organizational outcomes, such as personnel turnover intentions, organizational citizenship behavior, etc. (Meyer et al. in J Org Behav 27:665-683, 2006). The theoretical integrative model which underlies ICI Quijano et al. (2000) was tested in a sample (N = 625) of workers in a Spanish public hospital. Confirmatory factor analysis through structural equation modeling was performed. Elliptical least square solution was chosen as estimator procedure on account of non-normal distribution of the variables. The results confirm the goodness of fit of an integrative model, which underlies the relation between Commitment and Identification, although each one is operatively different.

Classical line shapes based on analytical solutions of bimolecular trajectories in collision induced emission. II. Reactive collisions

The classical theory of collision induced emission (CIE) from pairs of dissimilar rare gas atoms was developed in Paper I [D. Reguera and G. Birnbaum, J. Chem. Phys. 125, 184304 (2006)] from a knowledge of the straight line collision trajectory and the assumption that the magnitude of the dipole could be represented by an exponential function of the inter-nuclear distance. This theory is extended here to deal with other functional forms of the induced dipole as revealed by ab initio calculations. Accurate analytical expression for the CIE can be obtained by least square fitting of the ab initio values of the dipole as a function of inter-atomic separation using a sum of exponentials and then proceeding as in Paper I. However, we also show how the multi-exponential fit can be replaced by a simpler fit using only two analytic functions. Our analysis is applied to the polar molecules HF and HBr. Unlike the rare gas atoms considered previously, these atomic pairs form stable bound diatomic molecules. We show that, interestingly, the spectra of these reactive molecules are characterized by the presence of multiple peaks. We also discuss the CIE arising from half collisions in excited electronic states, which in principle could be probed in photo-dissociation experiments.

Productivity and innovation spillovers: Micro evidence from Spain

This article analyses the impact that innovation expenditure and intrasectoral and intersectoral externalities have on productivity in Spanish firms. While there is an extensive literature analysing the relationship between innovation and productivity, in this particular area there are far fewer studies that examine the importance of sectoral externalities, especially with the focus on Spain. One novelty of the study, which covers the industrial and service sectors, is that we also consider jointly the technology level of the sector in which the firm operates and the firm size. The database used is the Technological Innovation Panel, PITEC, which includes 12,813 firms for the year 2008 and has been little used in this type of study. The estimation method used is Iteratively Reweighted Least Squares method, IRLS, which is very useful for obtaining robust estimations in the presence of outliers. The results confirm that innovation has a positive effect on productivity, especially in high-tech and large firms. The impact of externalities is more heterogeneous because, while intrasectoral externalities have a poitive and significant effect, especially in low-tech firms independently of size, intersectoral externalities have a more ambiguous effect, being clearly significant for advanced industries in which size has a positive effect.

On the robustness of least-squares Monte Carlo (LSM) for pricing American derivatives

This paper analyses the robustness of Least-Squares Monte Carlo, a techniquerecently proposed by Longstaff and Schwartz (2001) for pricing Americanoptions. This method is based on least-squares regressions in which theexplanatory variables are certain polynomial functions. We analyze theimpact of different basis functions on option prices. Numerical resultsfor American put options provide evidence that a) this approach is veryrobust to the choice of different alternative polynomials and b) few basisfunctions are required. However, these conclusions are not reached whenanalyzing more complex derivatives.

Linear least squares estimation of the first order moving average parameter

We propose an iterative procedure to minimize the sum of squares function which avoids the nonlinear nature of estimating the first order moving average parameter and provides a closed form of the estimator. The asymptotic properties of the method are discussed and the consistency of the linear least squares estimator is proved for the invertible case. We perform various Monte Carlo experiments in order to compare the sample properties of the linear least squares estimator with its nonlinear counterpart for the conditional and unconditional cases. Some examples are also discussed

Linear least squares estimation of the first order moving average parameter

We propose an iterative procedure to minimize the sum of squares function which avoids the nonlinear nature of estimating the first order moving average parameter and provides a closed form of the estimator. The asymptotic properties of the method are discussed and the consistency of the linear least squares estimator is proved for the invertible case. We perform various Monte Carlo experiments in order to compare the sample properties of the linear least squares estimator with its nonlinear counterpart for the conditional and unconditional cases. Some examples are also discussed

Asymptotic equivalence between the unconditional maximum likelihood and the square-law nonlinearity symbol timing estimation

This paper provides a systematic approach to theproblem of nondata aided symbol-timing estimation for linearmodulations. The study is performed under the unconditionalmaximum likelihood framework where the carrier-frequencyerror is included as a nuisance parameter in the mathematicalderivation. The second-order moments of the received signal arefound to be the sufficient statistics for the problem at hand and theyallow the provision of a robust performance in the presence of acarrier-frequency error uncertainty. We particularly focus on theexploitation of the cyclostationary property of linear modulations.This enables us to derive simple and closed-form symbol-timingestimators which are found to be based on the well-known squaretiming recovery method by Oerder and Meyr. Finally, we generalizethe OM method to the case of linear modulations withoffset formats. In this case, the square-law nonlinearity is foundto provide not only the symbol-timing but also the carrier-phaseerror.

BAPNE method and N eurorehabilitation in patients with severe acquired brain injury

The use of body percussion through BAPNE method in neurorehabilitation offers the possibility of studying the development of motor skills, attention, coordination, memory and social interaction of patients with neurological diseases. The experimental protocol was carried out on 52 patients with severe acquired brain injury. Patients were selected for the cut - off scores in the standard neuropsychologic al tests of sustained attention , divided and alert ; at least one emisoma intact, cut -off scores in the standard for procedural and semantic memory ; eye sight , hearing and speech intact. The first group of patients has supported the protocol BAPNE tougher with the traditional rehabilitation activities . The control group continued to perform exclusively the cognitive and neuromotor rehabilitation according to traditional protocols. At 6 months after administration of the protocol is expected to re-test to assess if present , the maintenance of the effects of rehabilitation obtained. Experimentation is carried out for 10 weeks following the protocol of BAPNE method in the Roboris Foundation of Rome.

Properties of amorphous silicon thin films grown in square wave modulated silane rf discharges.

Hydrogenated amorphous silicon (a‐Si:H) thin films have been obtained from pure SiH4 rf discharges by using the square wave modulation (SQWM) method. Film properties have been studied by means of spectroellipsometry, thermal desorption spectrometry, photothermal deflection spectroscopy and electrical conductivity measurements, as a function of the modulation frequency of the rf power amplitude (0.2-4000 Hz). The films deposited at frequencies about 1 kHz show the best structural and optoelectronic characteristics. Based upon the experimental results, a qualitative model is presented, which points up the importance of plasma negative ions in the deposition of a‐Si:H from SQWM rf discharges through their influence on powder particle formation.