Nanomotors: new strategies of (bio)sensing based on motion

Nanomotors are nanoscale devices capable of converting energy into movement and forces. Among them, self-propelled nanomotors offer considerable promise for developing new and novel bioanalytical and biosensing strategies based on the direct isolation of target biomolecules or changes in their movement in the presence of target analytes. The mainachievements of this project consists on the development of receptor-functionalized nanomotors that offer direct and rapid target detection, isolation and transport from raw biological samples without preparatory and washing steps. For example, microtube engines functionalized with aptamer, antibody, lectin and enzymes receptors were used for the direct isolation of analytes of biomedical interest, including proteins and whole cells, among others. A target protein was also isolated from a complex sample by using an antigen-functionalized microengine navigating into the reservoirs of a lab-on-a-chip device. The new nanomotorbased target biomarkers detection strategy not only offers highly sensitive, rapid, simple and low cost alternative for the isolation and transport of target molecules, but also represents a new dimension of analytical information based on motion. The recognition events can be easily visualized by optical microscope (without any sophisticated analytical instrument) to reveal the target presence and concentration. The use of artificial nanomachines has shown not only to be useful for (bio)recognition and (bio)transport but also for detection of environmental contamination and remediation. In this context, micromotors modified with superhydrophobic layer demonstrated that effectively interacted, captured, transported and removed oil droplets from oil contaminated samples. Finally, a unique micromotor-based strategy for water-quality testing, that mimics live-fish water-quality testing, based on changes in the propulsion behavior of artificial biocatalytic microswimmers in the presence of aquatic pollutants was also developed. The attractive features of the new micromachine-based target isolation and signal transduction protocols developed in this project offer numerous potential applications in biomedical diagnostics, environmental monitoring, and forensic analysis.

Combined dielectrophoretic and impedance system for on-chip controlled bacteria concentration: Application to Escherichia coli

The present paper reports a bacteria autonomous controlled concentrator prototype with a user-friendly interface for bench-top applications. It is based on a micro-fluidic lab-on-a-chip and its associated custom instrumentation, which consists in a dielectrophoretic actuator, to pre-concentrate the sample, and an impedance analyser, to measure concentrated bacteria levels. The system is composed by a single micro-fluidic chamber with interdigitated electrodes and a instrumentation with custom electronics. The prototype is supported by a real-time platform connected to a remote computer, which automatically controls the system and displays impedance data used to monitor the status of bacteria accumulation on-chip. The system automates the whole concentrating operation. Performance has been studied for controlled volumes of Escherichia coli (E. coli) samples injected into the micro-fluidic chip at constant flow rate of 10 μL/min. A media conductivity correcting protocol has been developed, as the preliminary results showed distortion of the impedance analyser measurement produced by bacterial media conductivity variations through time. With the correcting protocol, the measured impedance values were related to the quantity of bacteria concentrated with a correlation of 0.988 and a coefficient of variation of 3.1%. Feasibility of E. coli on-chip automated concentration, using the miniaturized system, has been demonstrated. Furthermore, the impedance monitoring protocol had been adjusted and optimized, to handle changes in the electrical properties of the bacteria media over time.

Nanotermoparells: heterounions de nanowires

Projecte de recerca elaborat a partir d’una estada a la University of California a Irvine, EEUU, entre juliol del 2007 i gener del 2008. Els termoparells són actualment els sensors de temperatura més populars i més utilitzats per a un ampli rang d’aplicacions: industrials, domèstiques, etc. Aconseguir miniaturar els dispositius fins a dimensions extremadament petites obra un ampli rang de noves aplicacions per aquests dispositius, per exemple, en el camp de la tecnologia lab-on-a-chip. En aquesta investigació, el concepte de termoparell, és a dir, dos cables de diferent metall connectats per un extrem s’ha extrapolat a l’escala nanomètrica, utilitzant nanowires com a element de construcció. Aquests nanowires s’han sintetitzat a través d’un nou procediment desenvolupat en el grup d’investigació de la Universitat de California, Irvine, que ha permès treballar amb nanowires de diferents dimensions (control independent de l’alçada i amplada) i un major grau d’èxit en la fabricació d’aquests termometres. El mètode també permet dipositar aquestes nanoestructures sobre substractes no conductors de manera controlable, simplificant notablement tot el procés de fabricació. L’obtenció d’aquests dispositius ha permès demostrar que, a part de ser bons sensors de temperatura a nivell macroscòpic (fonts de calor ambientals), també permet la determinació de temperatura a nivell microscòpic (fonts de calor focalitzada, com és el cas de feixos làser). Per a la seva caracterització ha estat necessari l’ús de tecnologia puntera (làsers, amplificadors, microscopis de forces atòmiques) i inclòs el disseny de nous dispositius. Aquests nanotermoparells presenten propietats extraordinàries, com una gran sensitivitat, gran velocitat de resposta a estímuls tèrmics, i un comportament estable vers l’ús i el temps.

Diffraction grating couplers milled in Si3N4 rib waveguides with a focused ion beam

Focused ion beam milling is a processing technology which allows flexible direct writing of nanometer scale features efficiently substituting electron beam lithography. No mask need results in ability for patterns writing even on fragile micromechanical devices. In this work we studied the abilities of the tool for fabrication of diffraction grating couplers in silicon nitride waveguides. The gratings were fabricated on a chip with extra fragile cantilevers of sub micron thickness. Optical characterization of the couplers was done using excitation of the waveguides in visible range by focused Gaussian beams of different waist sizes. Influence of Ga+ implantation on the device performance was studied.

Creació d'IP Cores en una plataforma NIOS: metodologia de disseny

NIOS és el processador que Altera empra en els seus dissenys SOC (System On Chip). Per tal de facilitar-ne el seu ús, Altera també proporciona una plataforma de desenvolupament SOPC (System On Programable Chip) que agilitza enormement el disseny d’aquests sistemes. Així doncs, aquest projecte està centrat en la definició metodològica per a la creació d'IP Cores en una plataforma NIOS.

Mujeres inmigradas y prácticas sociolegales en situaciones de violencia en la pareja: diferencias, desigualdades y disidencias en los contextos de atención

La investigación aborda el problema de la violencia de género dentro de la pareja en mujeres inmigrantes. El objetivo es conocer el impacto de los dispositivos sociolegales sobre las propias mujeres inmigrantes, a la vez que se conoce como el fenómeno de la inmigración ha influido en las prácticas institucionales. Los resultados indican efectos de protección y a la vez efectos perversos en los dispositivos sociolegales que se cuidan de las mujeres inmigradas. Se hacen propuestas para una intervención más situada y reflexiva.

Valoración experiencial del aprendizaje tras formación virtual.

[eng] An observable study on the behaviour in the laboratory of Pharmaceutical Technology II (pharmaceutical pilot plant), with two groups of students of 3rd course (proactive aptitude and valuation of the"knowledge to do acquired") is carried out. The variable between groups is that one has realised a training (by means of self-study of an interactive application multimedia, especially designed), without tutorship on behalf the teacher in front of the other group that carried out the same training with the same material but with the guide of the teacher in the computer lab. On the one hand it is valued if there is some effect differentiator between both types of training, by means of the accounting of the correct results obtained in a previous test to the entrance in the pilot plant and by another one the valuation that the professors made responsible for the groups of practices in situ. The results demonstrate the previous hypothesis that there must not be significant differences between the groups, beyond the inherent ones to personality of the students itself (interest and personal implication by the subject). On the other hand the test for the observation in the laboratory did not facilitate the distinction of objective differences. [spa] Se lleva a cabo un estudio observacional sobre el comportamiento de los estudiantes (aptitud pro-activa y valoración del “saber hacer adquirido”) en el laboratorio de Tecnología Farmacéutica II (planta piloto farmacéutica) de dos grupos de estudiantes de 3er curso. La variable entre los dos grupos es que uno ha realizado una formación no presencial (mediante el autoestudio de una aplicación interactiva multimedia, especialmente diseñada), sin tutoría por parte del profesor, frente al otro grupo que llevó a cabo la misma formación con el mismo material pero con la guía del profesor en el aula de informática. Por una parte se valora si hay algún efecto diferenciador entre ambos tipos de formación, mediante la contabilización de los resultados correctos obtenidos en un test previo a la entrada en la planta piloto y por otro la valoración que hicieron los profesores responsables de los grupos de prácticas in situ. Los resultados demuestran la hipótesis previa de que no debían existir diferencias significativas entre los grupos, más allá de las inherentes a la propia personalidad de los estudiantes (interés e implicación personal por el tema). Por otra parte el test para la observación en el laboratorio no facilitó la distinción de diferencias objetivas.

Valoración experiencial del aprendizaje tras formación virtual.

[eng] An observable study on the behaviour in the laboratory of Pharmaceutical Technology II (pharmaceutical pilot plant), with two groups of students of 3rd course (proactive aptitude and valuation of the"knowledge to do acquired") is carried out. The variable between groups is that one has realised a training (by means of self-study of an interactive application multimedia, especially designed), without tutorship on behalf the teacher in front of the other group that carried out the same training with the same material but with the guide of the teacher in the computer lab. On the one hand it is valued if there is some effect differentiator between both types of training, by means of the accounting of the correct results obtained in a previous test to the entrance in the pilot plant and by another one the valuation that the professors made responsible for the groups of practices in situ. The results demonstrate the previous hypothesis that there must not be significant differences between the groups, beyond the inherent ones to personality of the students itself (interest and personal implication by the subject). On the other hand the test for the observation in the laboratory did not facilitate the distinction of objective differences. [spa] Se lleva a cabo un estudio observacional sobre el comportamiento de los estudiantes (aptitud pro-activa y valoración del “saber hacer adquirido”) en el laboratorio de Tecnología Farmacéutica II (planta piloto farmacéutica) de dos grupos de estudiantes de 3er curso. La variable entre los dos grupos es que uno ha realizado una formación no presencial (mediante el autoestudio de una aplicación interactiva multimedia, especialmente diseñada), sin tutoría por parte del profesor, frente al otro grupo que llevó a cabo la misma formación con el mismo material pero con la guía del profesor en el aula de informática. Por una parte se valora si hay algún efecto diferenciador entre ambos tipos de formación, mediante la contabilización de los resultados correctos obtenidos en un test previo a la entrada en la planta piloto y por otro la valoración que hicieron los profesores responsables de los grupos de prácticas in situ. Los resultados demuestran la hipótesis previa de que no debían existir diferencias significativas entre los grupos, más allá de las inherentes a la propia personalidad de los estudiantes (interés e implicación personal por el tema). Por otra parte el test para la observación en el laboratorio no facilitó la distinción de diferencias objetivas.

Monitoratge remot d'esdeveniments per al control i supervisió utilitzant "System on chip" i "w-USB"

Aquesta memòria descriu el procés de desenvolupament d'un projecte que consisteix en un conjunt de hardware, “PSoC” (Programmable System on Chip), i un software, C#, mitjançant els quals s'automatitza la gestió de comandes a les taules d'un restaurant. A cada taula trobem un aparell anomenat “WaiterClient”, a través del qual els clients sol·liciten l'atenció d'un cambrer. Aquest hardware té una pantalla on es mostrarà informació i un conjunt de polsadors per demanar. Per una altra banda, trobem un altre aparell, “WaiterServidor”, encarregat de rebre els senyals enviats per wireless des dels “WaiterClients” que hi ha a cada taula. Un cop rebudes, les transmet a un ordinador central per cable sèrie RS-232.

Sistema de monitorització vital portable amb System on Chip i interfície SD Card

Aquesta memòria descriu el procés de desenvolupament del projecte de fi de carrera “Sistema de monitorització vital portable amb System on Chip i interfície SD Card”. Aquest es tracta d’un dispositiu de dimensions reduïdes, baix consum i portable amb capacitat d’enregistrar els biopotencials cardíacs dins d’una targeta de memòria flash SD Card. En temps real es mostra una representació d’aquests biopotencials mitjançant una pantalla LCD gràfica. El projecte, a més, inclou el desenvolupament d’un software de visualització per PC que permet l’anàlisi posterior més detallada dels registres emmagatzemats a la targeta SD Card.

Evaluation of free libraries for visual recognition of art imagery on mobile devices

This paper describes a systematic research about free software solutions and techniques for art imagery computer recognition problem.

Non-invasive RF built-in testing using on-chip temperature sensors

This poster shows how to efficiently observe high-frequency figures of merit in RF circuits by measuring DC temperature with CMOS-compatible built-in sensors.

On the role of non-equilibrium focal points as coordination devices

Considering a pure coordination game with a large number of equivalentequilibria, we argue, first, that a focal point that is itself not a Nash equilibriumand is Pareto dominated by all Nash equilibria, may attract the players'choices. Second, we argue that such a non-equilibrium focal point may act asan equilibrium selection device that the players use to coordinate on a closelyrelated small subset of Nash equilibria. We present theoretical as well asexperimental support for these two new roles of focal points as coordinationdevices.

Thermal modeling and management in ultrathin chip stack technology

This paper presents a thermal modeling for power management of a new three-dimensional (3-D) thinned dies stacking process. Besides the high concentration of power dissipating sources, which is the direct consequence of the very interesting integration efficiency increase, this new ultra-compact packaging technology can suffer of the poor thermal conductivity (about 700 times smaller than silicon one) of the benzocyclobutene (BCB) used as both adhesive and planarization layers in each level of the stack. Thermal simulation was conducted using three-dimensional (3-D) FEM tool to analyze the specific behaviors in such stacked structure and to optimize the design rules. This study first describes the heat transfer limitation through the vertical path by examining particularly the case of the high dissipating sources under small area. First results of characterization in transient regime by means of dedicated test device mounted in single level structure are presented. For the design optimization, the thermal draining capabilities of a copper grid or full copper plate embedded in the intermediate layer of stacked structure are evaluated as a function of the technological parameters and the physical properties. It is shown an interest for the transverse heat extraction under the buffer devices dissipating most the power and generally localized in the peripheral zone, and for the temperature uniformization, by heat spreading mechanism, in the localized regions where the attachment of the thin die is altered. Finally, all conclusions of this analysis are used for the quantitative projections of the thermal performance of a first demonstrator based on a three-levels stacking structure for space application.

Selective ablation of photovoltaic materials with UV laser sources for monolithic interconnection of devices based on a-Si:H

Lasers are essential tools for cell isolation and monolithic interconnection in thin-film-silicon photovoltaic technologies. Laser ablation of transparent conductive oxides (TCOs), amorphous silicon structures and back contact removal are standard processes in industry for monolithic device interconnection. However, material ablation with minimum debris and small heat affected zone is one of the main difficulty is to achieve, to reduce costs and to improve device efficiency. In this paper we present recent results in laser ablation of photovoltaic materials using excimer and UV wavelengths of diode-pumped solid-state (DPSS) laser sources. We discuss results concerning UV ablation of different TCO and thin-film silicon (a-Si:H and nc-Si:H), focussing our study on ablation threshold measurements and process-quality assessment using advanced optical microscopy techniques. In that way we show the advantages of using UV wavelengths for minimizing the characteristic material thermal affection of laser irradiation in the ns regime at higher wavelengths. Additionally we include preliminary results of selective ablation of film on film structures irradiating from the film side (direct writing configuration) including the problem of selective ablation of ZnO films on a-Si:H layers. In that way we demonstrate the potential use of UV wavelengths of fully commercial laser sources as an alternative to standard backscribing process in device fabrication.