Turn-on-time statistics of modulated lasers subjected to resonant weak optical feedback

We present analytical calculations of the turn-on-time probability distribution of intensity-modulated lasers under resonant weak optical feedback. Under resonant conditions, the external cavity round-trip time is taken to be equal to the modulation period. The probability distribution of the solitary laser results are modified to give reduced values of the mean turn-on-time and its variance. Numerical simulations have been carried out showing good agreement with the analytical results.

Going beyond energy intensity to understand the energy metabolism of nations: the case of Argentina

The link between energy consumption and economic growth has been widely studied in the economic literature. Understanding this relationship is important from both an environmental and a socio-economic point of view, as energy consumption is crucial to economic activity and human environmental impact. This relevance is even higher for developing countries, since energy consumption per unit of output varies through the phases of development, increasing from an agricultural stage to an industrial one and then decreasing for certain service based economies. In the Argentinean case, the relevance of energy consumption to economic development seems to be particularly important. While energy intensity seems to exhibit a U-Shaped curve from 1990 to 2003 decreasing slightly after that year, total energy consumption increases along the period of analysis. Why does this happen? How can we relate this result with the sustainability debate? All these questions are very important due to Argentinean hydrocarbons dependence and due to the recent reduction in oil and natural gas reserves, which can lead to a lack of security of supply. In this paper we study Argentinean energy consumption pattern for the period 1990-2007, to discuss current and future energy and economic sustainability. To this purpose, we developed a conventional analysis, studying energy intensity, and a non conventional analysis, using the Multi-Scale Integrated Analysis of Societal and Ecosystem Metabolism (MuSIASEM) accounting methodology. Both methodologies show that the development process followed by Argentina has not been good enough to assure sustainability in the long term. Instead of improving energy use, energy intensity has increased. The current composition of its energy mix, and the recent economic crisis in Argentina, as well as its development path, are some of the possible explanations.

Ecological Footprint Inequality across countries: the role of environment intensity, income and interaction effects

Recently, White (2007) analysed the international inequalities in Ecological Footprints per capita (EF hereafter) based on a two-factor decomposition of an index from the Atkinson family (Atkinson (1970)). Specifically, this paper evaluated the separate role of environment intensity (EF/GDP) and average income as explanatory factors for these global inequalities. However, in addition to other comments on their appeal, this decomposition suffers from the serious limitation of the omission of the role exerted by probable factorial correlation (York et al. (2005)). This paper proposes, by way of an alternative, a decomposition of a conceptually similar index like Theil’s (Theil, 1967) which, in effect, permits clear decomposition in terms of the role of both factors plus an inter-factor correlation, in line with Duro and Padilla (2006). This decomposition might, in turn, be extended to group inequality components (Shorrocks, 1980), an analysis that cannot be conducted in the case of the Atkinson indices. The proposed methodology is implemented empirically with the aim of analysing the international inequalities in EF per capita for the 1980-2007 period and, amongst other results, we find that, indeed, the interactive component explains, to a significant extent, the apparent pattern of stability observed in overall international inequalities.

Ecological Footprint Inequality across countries: the role of environment intensity, income and interaction effects

Recently, White (2007) analysed the international inequalities in Ecological Footprints per capita (EF hereafter) based on a two-factor decomposition of an index from the Atkinson family (Atkinson (1970)). Specifically, this paper evaluated the separate role of environment intensity (EF/GDP) and average income as explanatory factors for these global inequalities. However, in addition to other comments on their appeal, this decomposition suffers from the serious limitation of the omission of the role exerted by probable factorial correlation (York et al. (2005)). This paper proposes, by way of an alternative, a decomposition of a conceptually similar index like Theil’s (Theil, 1967) which, in effect, permits clear decomposition in terms of the role of both factors plus an inter-factor correlation, in line with Duro and Padilla (2006). This decomposition might, in turn, be extended to group inequality components (Shorrocks, 1980), an analysis that cannot be conducted in the case of the Atkinson indices. The proposed methodology is implemented empirically with the aim of analysing the international inequalities in EF per capita for the 1980-2007 period and, amongst other results, we find that, indeed, the interactive component explains, to a significant extent, the apparent pattern of stability observed in overall international inequalities. Key words: ecological footprint; international environmental distribution; inequality decomposition

Unemployment insurance with endogenous search intensity and precautionary saving

A welfare analysis of unemployment insurance (UI) is performed in a generalequilibrium job search model. Finitely-lived, risk-averse workers smooth consumption over time by accumulating assets, choose search effort whenunemployed, and suffer disutility from work. Firms hire workers, purchasecapital, and pay taxes to finance worker benefits; their equity is the assetaccumulated by workers. A matching function relates unemployment, hiringexpenditure, and search effort to the formation of jobs. The model is calibrated to US data; the parameters relating job search effort to the probability of job finding are chosen to match microeconomic studies ofunemployment spells. Under logarithmic utility, numerical simulation shows rather small welfaregains from UI. Even without UI, workers smooth consumption effectivelythrough asset accumulation. Greater risk aversion leads to substantiallylarger welfare gains from UI; however, even in this case much of its welfareimpact is due not to consumption smoothing effects, but rather to decreased work disutility, or to a variety of externalities.

Effective eigenvalue for the intensity correlations of single-mode and two-mode lasers

Exact formulas for the effective eigenvalue characterizing the initial decay of intensity correlation functions are given in terms of stationary moments of the intensity. Spontaneous emission noise and nonwhite pump noise are considered. Our results are discussed in connection with earlier calculations, simulations, and experimental results for single-mode dye lasers, two-mode inhomogeneously broadened lasers, and two-mode dye ring lasers. The effective eigenvalue is seen to depend sensitively on noise characteristics and symmetry properties of the system. In particular, the effective eigenvalue associated with cross correlations of two-mode lasers is seen to vanish in the absence of pump noise as a consequence of detailed balance. In the presence of pump noise, the vanishing of this eigenvalue requires equal pump parameters for the two modes and statistical independence of spontaneous emission noise acting on each mode.

Intensity correlation function of dye lasers: Short-time behavior

We propose an equation to calculate the intensity correlation function of a dye-laser model with a pump parameter subject to finite-bandwidth fluctuations. The equation is valid, in the weak-noise limit, for all times. It incorporates novel non-Markovian features. Results are given for the short-time behavior of the correlation function. It exhibits a characteristic initial plateau. Our findings are supported by a numerical simulation of the model.

Front propagation in spatially modulated media

A two-dimensional reaction-diffusion front which propagates in a modulated medium is studied. The modulation consists of a spatial variation of the local front velocity in the transverse direction to that of the front propagation. We study analytically and numerically the final steady-state velocity and shape of the front, resulting from a nontrivial interplay between the local curvature effects and the global competition process between different maxima of the control parameter. The transient dynamics of the process is also studied numerically and analytically by means of singular perturbation techniques.

Wave competition in excitable modulated media.

The propagation of an initially planar front is studied within the framework of the photosensitive Belousov-Zhabotinsky reaction modulated by a smooth spatial variation of the local front velocity in the direction perpendicular to front propagation. Under this modulation, the wave front develops several fingers corresponding to the local maxima of the modulation function. After a transient, the wave front achieves a stationary shape that does not necessarily coincide with the one externally imposed by the modulation. Theoretical predictions for the selection criteria of fingers and steady-state velocity are experimentally validated.

Intensity correlation functions of dye lasers: Comparison of colored-gain-noise and colored-loss-noise models

The intensity correlation functions C(t) for the colored-gain-noise model of dye lasers are analyzed and compared with those for the loss-noise model. For correlation times ¿ larger than the deterministic relaxation time td, we show with the use of the adiabatic approximation that C(t) values coincide for both models. For small correlation times we use a method that provides explicit expressions of non-Markovian correlation functions, approximating simultaneously short- and long-time behaviors. Comparison with numerical simulations shows excellent results simultaneously for short- and long-time regimes. It is found that, when the correlation time of the noise increases, differences between the gain- and loss-noise models tend to disappear. The decay of C(t) for both models can be described by a time scale that approaches the deterministic relaxation time. However, in contrast with the loss-noise model, a secondary time scale remains for large times for the gain-noise model, which could allow one to distinguish between both models.

Ellipsometric study of a-Si:H thin films deposited by square wave modulated rf glow discharge

Thin films of hydrogenated amorphous silicon (a‐Si:H), deposited by square wave modulated (SQWM) rf silane discharges, have been studied through spectroscopic and real time phase modulated ellipsometry. The SQMW films obtained at low mean rf power density (19 mW/cm2) have shown smaller surface roughness than those obtained in standard continuous wave (cw) rf discharges. At higher rf powers (≥56 mW/cm2), different behaviors depending on the modulating frequency have been observed. On the one hand, at low modulating frequencies (<40 Hz), the SQWM films have shown a significant increase of porosity and surface roughness as compared to cw samples. On the other, at higher modulating frequencies, the material density and roughness have been found to be similar in SQWM and cw films. Furthermore, the deposition rate of the films show more pronounced increases with the modulating frequency as the rf power is increased. Experimental results are discussed in terms of plasma negative charged species which can be relatively abundant in high rf power discharges and cause significant effects on the deposited layers through polymers, clusters, and powder formation.

Controlled-intensity detection peaks in a binary joint transform correlator

In multiobject pattern recognition the height of the correlation peaks should be controlled when the power spectrum of ajoint transform correlator is binarized. In this paper a method to predetermine the value of detection peaks is demonstrated. The technique is based on a frequency-variant threshold in order to remove the intraclass terms and on a suitable factor to normalize the binary joint power spectrum. Digital simulations and experimental hybrid implementation of this method were carried out.