A Log-linear model of grain size influence on the geochemistry of sediments

Sediment composition is mainly controlled by the nature of the source rock(s), and chemical (weathering) and physical processes (mechanical crushing, abrasion, hydrodynamic sorting) during alteration and transport. Although the factors controlling these processes are conceptually well understood, detailed quantification of compositional changes induced by a single process are rare, as are examples where the effects of several processes can be distinguished. The present study was designed to characterize the role of mechanical crushing and sorting in the absence of chemical weathering. Twenty sediment samples were taken from Alpine glaciers that erode almost pure granitoid lithologies. For each sample, 11 grain-size fractions from granules to clay (ø grades &-1 to &9) were separated, and each fraction was analysed for its chemical composition.The presence of clear steps in the box-plots of all parts (in adequate ilr and clr scales) against ø is assumed to be explained by typical crystal size ranges for the relevant mineral phases. These scatter plots and the biplot suggest a splitting of the full grain size range into three groups: coarser than ø=4 (comparatively rich in SiO2, Na2O, K2O, Al2O3, and dominated by “felsic” minerals like quartz and feldspar), finer than ø=8 (comparatively rich in TiO2, MnO, MgO, Fe2O3, mostly related to “mafic” sheet silicates like biotite and chlorite), and intermediate grains sizes (4≤ø &8; comparatively rich in P2O5 and CaO, related to apatite, some feldspar).To further test the absence of chemical weathering, the observed compositions were regressed against three explanatory variables: a trend on grain size in ø scale, a step function for ø≥4, and another for ø≥8. The original hypothesis was that the trend could be identified with weathering effects, whereas each step function would highlight those minerals with biggest characteristic size at its lower end. Results suggest that this assumption is reasonable for the step function, but that besides weathering some other factors (different mechanical behavior of minerals) have also an important contribution to the trend.Key words: sediment, geochemistry, grain size, regression, step function

The chemical variability at the surface of Mars: implications for exogenic processes

The chemical composition of sediments and rocks, as well as their distribution at theMartian surface, represent a long term archive of processes, which have formed theplanetary surface. A survey of chemical compositions by means of Compositional DataAnalysis represents a valuable tool to extract direct evidence for weathering processesand allows to quantify weathering and sedimentation rates. clr-biplot techniques areapplied for visualization of chemical relationships across the surface (“chemical maps”).The variability among individual suites of data is further analyzed by means of clr-PCA,in order to extract chemical alteration vectors between fresh rocks and their crusts andfor an assessment of different source reservoirs accessible to soil formation. Bothtechniques are applied to elucidate the influence of remote weathering by combinedanalysis of several soil forming branches. Vector analysis in the Simplex provides theopportunity to study atmosphere surface interactions, including the role andcomposition of volcanic gases

Advanced applications of scanning electron microscopy in geology

Nowadays Scanning Electron Microscopy (SEM) is a basic and fundamental tool in the study of geologic samples. The collision of a highlyaccelerated electron beam with the atoms of a solid sample results in theproduction of several radiation types than can be detected and analysed byspecific detectors, providing information of the chemistry and crystallography ofthe studied material. From this point of view, the chamber of a SEM can beconsidered as a laboratory where different experiments can be carried out. Theapplication of SEM to geology, especially in the fields of mineralogy andpetrology has been summarised by Reed (1996).The aim of this paper is to showsome recent applications in the characterization of geologic materials.

Geology of the Cerro-Quema Au-Cu deposit (Azuero Peninsula, Panama)

The Cerro Quema district, located on the Azuero Peninsula, Panama, is part of a large regional hydrothermal system controlled by regional faults striking broadly E-W, developed within the Río Quema Formation. This formation is composed of volcanic, sedimentary and volcano-sedimentary rocks indicating a submarine depositional environment, corresponding to the fore-arc basin of a CretaceousPaleogene volcanic arc. The structures observed in the area and their tectono-stratigraphic relationship with the surrounding formations suggest a compressive and/or transpressive tectonic regime, at least during Late CretaceousOligocene times. The igneous rocks of the Río Quema Formation plot within the calc-alkaline field with trace and rare earth element (REE) patterns of volcanic arc affinity. This volcanic arc developed on the Caribbean large igneous province during subduction of the Farallon Plate. Mineralization consists of disseminations of pyrite and enargite as well as a stockwork of pyrite and barite with minor sphalerite, galena and chalcopyrite, hosted by a subaqueous dacitic lava dome of the Río Quema Formation. Gold is present as submicroscopic grains and associated with pyrite as invisible gold. A hydrothermal alteration pattern with a core of advanced argillic alteration (vuggy silica with alunite, dickite, pyrite and enargite) and an outer zone of argillic alteration (kaolinite, smectite and illite) has been observed. Supergene oxidation overprinted the hydrothermal alteration resulting in a thick cap of residual silica and iron oxides. The ore minerals, the alteration pattern and the tectono-volcanic environment of Cerro Quema are consistent with a high sulfidation epithermal system developed in the Azuero peninsula during pre-Oligocene times.

Geology of the Cerro-Quema Au-Cu deposit (Azuero Peninsula, Panama)

The Cerro Quema district, located on the Azuero Peninsula, Panama, is part of a large regional hydrothermal system controlled by regional faults striking broadly E-W, developed within the Río Quema Formation. This formation is composed of volcanic, sedimentary and volcano-sedimentary rocks indicating a submarine depositional environment, corresponding to the fore-arc basin of a Cretaceous-Paleogene volcanic arc. The structures observed in the area and their tectono-stratigraphic relationship with the surrounding formations suggest a compressive and/or transpressive tectonic regime, at least during Late Cretaceous-Oligocene times. The igneous rocks of the Río Quema Formation plot within the calc-alkaline field with trace and rare earth element (REE) patterns of volcanic arc affinity. This volcanic arc developed on the Caribbean large igneous province during subduction of the Farallon Plate. Mineralization consists of disseminations of pyrite and enargite as well as a stockwork of pyrite and barite with minor sphalerite, galena and chalcopyrite, hosted by a subaqueous dacitic lava dome of the Río Quema Formation. Gold is present as submicroscopic grains and associated with pyrite as invisible gold. A hydrothermal alteration pattern with a core of advanced argillic alteration (vuggy silica with alunite, dickite, pyrite and enargite) and an outer zone of argillic alteration (kaolinite, smectite and illite) has been observed. Supergene oxidation overprinted the hydrothermal alteration resulting in a thick cap of residual silica and iron oxides. The ore minerals, the alteration pattern and the tectono-volcanic environment of Cerro Quema are consistent with a high sulfidation epithermal system developed in the Azuero peninsula during pre-Oligocene times.

Mesozoic geology of Cape Shirreff, Livingston Island, South Shetland Islands, Antarctica.

Al Cap de Shirr e ff (Fig. 1) hi aflora una successió volcànica de com a mínim 450 m de potència, constituïda principalment per laves i, en menor proporció, bretxes vulcanoclàstiques (Fig. 2). Les laves són basalts olivínics subalcalins i andesites basàltiques, que generalment tenen un aspecte massiu. Tot i això, la successió volcànica localment forma una alternança decimètrica de nivells durs i tous, amb potències va r i a bles i presència local de discordances angulars i onlaps, que reflecteixen geometries deposicionals complexes. A la zona nord del Cap de Shirr e ff hi ha aflorament de bretxes vulcanoclàstiques d"aspecte massiu, que localment tenen intercalacions de laves...

Quaternary Glacial Geology of Alta Ribagorqa Basin (Central Southern Pyrenees)

This paper is an abstract of the doctoral thesis presented by the autor at the University of Barcelona on September 1983. It constitutes a regional study about the Quatemary Glacial Geology in the Ribagorca high valleys. It is the first work in relation to the geomorphology, sedimentology and stratigraphy of the glacial and related deposits in this zone of the Pyrenees. Several formations of quatemary deposits have been studied in detail (mainly in Llauset Valley and in Tall area); and the local quatemary stratigraphy is established and finally a correlation with some previously studied areas in the Pyrenees is attemped.

Engineering Geology for Society and Territory: volume 2: landslide processes

This book is one out of 8 IAEG XII Congress volumes, and deals with Landslide processes, including: field data and monitoring techniques, prediction and forecasting of landslide occurrence, regional landslide inventories and dating studies, modeling of slope instabilities and secondary hazards (e.g. impulse waves and landslide-induced tsunamis, landslide dam failures and breaching), hazard and risk assessment, earthquake and rainfall induced landslides, instabilities of volcanic edifices, remedial works and mitigation measures, development of innovative stabilization techniques and applicability to specific engineering geological conditions, use of geophysical techniques for landslide characterization and investigation of triggering mechanisms. Focuses is given to innovative techniques, well documented case studies in different environments, critical components of engineering geological and geotechnical investigations, hydrological and hydrogeological investigations, remote sensing and geophysical techniques, modeling of triggering, collapse, runout and landslide reactivation, geotechnical design and construction procedures in landslide zones, interaction of landslides with structures and infrastructures and possibility of domino effects. The Engineering Geology for Society and Territory volumes of the IAEG XII Congress held in Torino from September 15-19, 2014, analyze the dynamic role of engineering geology in our changing world and build on the four main themes of the congress: environment, processes, issues, and approaches.

Visualización estéreo

En este proyecto se muestran las posibilidades de la visión estéreo para la visualización en monitores tanto de objetos simples como de grandes escenarios, así como su aplicación en juegos o en otros ámbitos como el cine, la geología e incluso la medicina. Para el desarrollo se ha usado una tarjeta con soporte 3d como la Nvidia 7600GT y una pantalla con una tasa de frecuencia alta como una ACER 19 pulgadas a 100Hz. Los resultados sobre la visualización han sido extraídos de las opiniones de un grupo de 20 personas, de diversas profesiones, no relacionadas con los gráficos por ordenador.

Home i natura a la Vall de Riells

Considerant l’absència d’estudis ambientals previs a la Vall de Riells (Bigues i Riells, Vallès Oriental), i l’evident necessitat de gestió de l’espai a causa de la sobrefreqüentació antròpica, s’ha realitzat aquesta diagnosi ambiental. En ella es descriuen de manera integrada els principals elements del medi físic, biòtic i socioeconòmic, per tal de proporcionar les eines necessàries per avaluar les problemàtiques de l’espai i fomentar la seva gestió i conservació.

Creació de recursos digitals per a la innovació docent en Geologia Estructural i Tectònica

El projecte ha estat dedicat a l’elaboració d’una sèrie de recursos didàctics en format digital per a l’ensenyament de les matèries de Geologia Estructural i Tectònica en titulacions universitàries relacionades amb les Ciències de la Terra. L’objectiu és la millora de la formació i del rendiment dels estudiants mitjançant l’elaboració d’activitats de suport no presencials que fomentin l’autoaprenentatge i l’autoregulació per part de l’estudiant. Les activitats intenten aprofitar les noves eines informàtiques disponibles i fomentar l’accés mitjançant la xarxa. El material que s’elabora en el marc del projecte consisteix en: 1) un fons documental d’imatges relacionades amb la Geologia Estructural i la Tectònica amb explicació, disponibles en xarxa i accessibles per motors específics de cerca, 2) un conjunt d’exercicis i casos pràctics, alguns d’ells resolts, i 3) sortides de camp virtuals d’una regió geològica que permeten proposar activitats prèvies a una pràctica presencial de camp o desenvolupar la pràctica a nivell completament autònom. Per aconseguir aquests objectius, les tasques realitzades són: la compilació i digitalització de la base d'imatges d'exemples naturals d'estructures geològiques de deformació de que disposàvem, junt amb la redacció de material explicatiu (text i figures), la selecció d'un conjunt d'exercicis de la disciplina, i la preparació de dades de camp per a la realització de les sortides virtuals. Paral•lelament, aquest material s'ha estat processant per a la seva disposició en xarxa com un recurs lliure y obert, accessible en una website i domini específics (plataforma REDITEC).

Creació de material docent digital per l'assignatura transversal de Geoarqueologia

En aquest projecte hem seguit desenvolupant i ampliant els continguts d’una assignatura de caràcter transversal entre Geologia i Arqueologia Prehistòrica aplicada als estudis universitaris. Aquesta ampliació s’ha dut a terme amb la creació d'un recull de fitxes amb les dades més rellevants d’alguns sepulcres megalítics de Catalunya fent especial esment als materials petris utilitzats en la seva construcció de per tal de poder desenvolupar i contextualitzar els resultats que s’assoleixin durant el curs. Cadascuna de les fitxes inclou per cada megàlit: 1) una situació geogràfica, 2) una part de descripció des del punt de vista arqueològic i 3) una part geològica amb la situació, descripció dels elements petris de les lloses tant a visu com al microscopi petrogràfic i una localització probable de l’àrea de procedència de les lloses. Això suposa un aprofundiment i ampliació de l'oferta pedagògica proposada que permet experimentar una metodologia d’ensenyament universitari més pràctica, aplicada i interactiva i s’emmarca en l’eix temàtic al voltant del qual es desenvolupa l’assignatura.

Ra isotopes and Rn as a tool for the water management resources: the Alberquillas aquifer (Málaga-Granada)

The aim of this project is to evaluate the importance of submarine groundwater discharge sector in order to improve the water balance in Málaga-Granada region. The approach of this study arose from the the geology and the aquifers that indicate that there could be some discharge to the sea between Maro (Málaga) and Almuñécar (Granada) and the Andalusian’s Government and its Water Agence were really interested in evaluating it because there is a lot of population and few water available and the magnitude of groundwater discharge has generated controversy. Is well known that water is a scarce resource in this area and it’s very important for the society and for the environment. The legislation, the water policies, the knowledge of the aquifer and the geology, the water dynamics, the land use and the water perception in the society might help the management of this resource not just in Andalusia but in all the Mediterranean basin. The main objective is to evaluate the submarine groundwater discharge from the Alberquillas Aqufier to the sea by measuring 222Rn and Ra isotopes. Specific objectives have been established to achieve the main objective: A) Reveal the importance of water resources in the Mediterranean basin; B) Learn radiometric techniques for the study of groundwater discharge to the sea; C) Learn of sampling techniques of water samples for the measurement of Ra and Rn; D) Learn the techniques for measuring Ra (RaDeCC) and Rn (RAD7); E) Interpretation and discussion of results. During this semester, and in addition of the present study in Málaga- Granada region, the author has participated in the initial phase (sampling, analysis and interpretation of preliminary results) of other research projects focused on the study of submarine groundwater discharges through the use of Ra isotopes and 222Rn. These studies have been developed in different areas, including Alt Empordà (Roses and Sant Pere Pescador), Maresme with CMIMA’s group (Mediterranean Center for Marine and Environmental Research), Delta de l’Ebre, Peñíscola and Mallorca with the IMEDEA’s group (Mediterranean Institute for Advanced Studies).

Implementación y entrenamiento de un modelo clasificatorio de red neural sobre la base de datos IGBADAT para la clasificación de las rocas basálticas de acuerdo a las clases del sistema de clasificación tradicional de Yoder and Tiller.

Aquest treball vol implementar un projecte de mineria de dades en l'àrea de la petrologia ígnia, especialitat englobada dins la geologia clàssica.

Application of compositional data analysis to geochemical data of marine sediments

In an earlier investigation (Burger et al., 2000) five sediment cores near the RodriguesTriple Junction in the Indian Ocean were studied applying classical statistical methods(fuzzy c-means clustering, linear mixing model, principal component analysis) for theextraction of endmembers and evaluating the spatial and temporal variation ofgeochemical signals. Three main factors of sedimentation were expected by the marinegeologists: a volcano-genetic, a hydro-hydrothermal and an ultra-basic factor. Thedisplay of fuzzy membership values and/or factor scores versus depth providedconsistent results for two factors only; the ultra-basic component could not beidentified. The reason for this may be that only traditional statistical methods wereapplied, i.e. the untransformed components were used and the cosine-theta coefficient assimilarity measure.During the last decade considerable progress in compositional data analysis was madeand many case studies were published using new tools for exploratory analysis of thesedata. Therefore it makes sense to check if the application of suitable data transformations,reduction of the D-part simplex to two or three factors and visualinterpretation of the factor scores would lead to a revision of earlier results and toanswers to open questions . In this paper we follow the lines of a paper of R. Tolosana-Delgado et al. (2005) starting with a problem-oriented interpretation of the biplotscattergram, extracting compositional factors, ilr-transformation of the components andvisualization of the factor scores in a spatial context: The compositional factors will beplotted versus depth (time) of the core samples in order to facilitate the identification ofthe expected sources of the sedimentary process.Kew words: compositional data analysis, biplot, deep sea sediments