14 resultados para Geology, Sratigraphic -- Holocene
em Consorci de Serveis Universitaris de Catalunya (CSUC), Spain
Resumo:
Several marine deposits in the southern Costa Brava shoreline have been studied. They appear at different heights above and below the present sea level. Three groups are defined in relation to their origin: conglomerate levels at the bottom of the cliffs, not-cementedemerged beaches and cemented submerged beaches. The age of the emerged beaches has been accurately determined by means of the ceramic content and radiocarbon dating. Chronological succession of the deposits and their stratigraphic and paleontological characteristics allow to define a sequence of the sea level changes during the latest stages of the versiliane transgression in the studied area
Resumo:
This paper describes petrologic and morphologic characteristics of fossil beaches submerged in the sector of the Costa Brava located between the Pals Beach and Blanes (Girona). These submerged beaches are composed of large-grain sandstone andconglomerate platforms, situated at a depth between 0.5 and 2.5 meters. These platforms are slightly inclinated towards the open sea. These deposits have been formed very recently, and date from Holocene, as noted by the presence of fragments of roman ceramics inside sandstone
Resumo:
Descripció de la seqüència estratigràfica i dels registres paleoambientals dels sediments holocens de Sant Julià de Boada
Resumo:
Se describe un conjunto de depósitos litorales localizados en la Costa Brava, que aparecen unos pocos metros por encima y por debajo del nivel del mar actual. En base a su génesis se han agrupado en niveles de conglomerados de pie de acantilado, playas levantabas sincementar y playas sumergidas cementadas (beachrock). Su edad se ha establecido apartir de los fragmentos de cerámica que contienen y de dataciones absolutas de 14C. Estos depósitos permiten detectaroscilaciones recientes del nivel del mar que se enmarcan en los últimos estadios de la transgresión Flandriense
Resumo:
Using X-Ray techniques, the boring activities of various Invertebrates on Bivalvia of wmian age were studied. Emphasis is placed on the boring activity of Porifera and their apparent preselection of the species bored, based on: a) the mineralogical composition, and/or b) the microstucture, andlor c) some special environmental conditions, or d) combinations of these three posibilities.
Resumo:
Nowadays Scanning Electron Microscopy (SEM) is a basic and fundamental tool in the study of geologic samples. The collision of a highlyaccelerated electron beam with the atoms of a solid sample results in theproduction of several radiation types than can be detected and analysed byspecific detectors, providing information of the chemistry and crystallography ofthe studied material. From this point of view, the chamber of a SEM can beconsidered as a laboratory where different experiments can be carried out. Theapplication of SEM to geology, especially in the fields of mineralogy andpetrology has been summarised by Reed (1996).The aim of this paper is to showsome recent applications in the characterization of geologic materials.
Resumo:
The Cerro Quema district, located on the Azuero Peninsula, Panama, is part of a large regional hydrothermal system controlled by regional faults striking broadly E-W, developed within the Río Quema Formation. This formation is composed of volcanic, sedimentary and volcano-sedimentary rocks indicating a submarine depositional environment, corresponding to the fore-arc basin of a CretaceousPaleogene volcanic arc. The structures observed in the area and their tectono-stratigraphic relationship with the surrounding formations suggest a compressive and/or transpressive tectonic regime, at least during Late CretaceousOligocene times. The igneous rocks of the Río Quema Formation plot within the calc-alkaline field with trace and rare earth element (REE) patterns of volcanic arc affinity. This volcanic arc developed on the Caribbean large igneous province during subduction of the Farallon Plate. Mineralization consists of disseminations of pyrite and enargite as well as a stockwork of pyrite and barite with minor sphalerite, galena and chalcopyrite, hosted by a subaqueous dacitic lava dome of the Río Quema Formation. Gold is present as submicroscopic grains and associated with pyrite as invisible gold. A hydrothermal alteration pattern with a core of advanced argillic alteration (vuggy silica with alunite, dickite, pyrite and enargite) and an outer zone of argillic alteration (kaolinite, smectite and illite) has been observed. Supergene oxidation overprinted the hydrothermal alteration resulting in a thick cap of residual silica and iron oxides. The ore minerals, the alteration pattern and the tectono-volcanic environment of Cerro Quema are consistent with a high sulfidation epithermal system developed in the Azuero peninsula during pre-Oligocene times.
Resumo:
The Cerro Quema district, located on the Azuero Peninsula, Panama, is part of a large regional hydrothermal system controlled by regional faults striking broadly E-W, developed within the Río Quema Formation. This formation is composed of volcanic, sedimentary and volcano-sedimentary rocks indicating a submarine depositional environment, corresponding to the fore-arc basin of a Cretaceous-Paleogene volcanic arc. The structures observed in the area and their tectono-stratigraphic relationship with the surrounding formations suggest a compressive and/or transpressive tectonic regime, at least during Late Cretaceous-Oligocene times. The igneous rocks of the Río Quema Formation plot within the calc-alkaline field with trace and rare earth element (REE) patterns of volcanic arc affinity. This volcanic arc developed on the Caribbean large igneous province during subduction of the Farallon Plate. Mineralization consists of disseminations of pyrite and enargite as well as a stockwork of pyrite and barite with minor sphalerite, galena and chalcopyrite, hosted by a subaqueous dacitic lava dome of the Río Quema Formation. Gold is present as submicroscopic grains and associated with pyrite as invisible gold. A hydrothermal alteration pattern with a core of advanced argillic alteration (vuggy silica with alunite, dickite, pyrite and enargite) and an outer zone of argillic alteration (kaolinite, smectite and illite) has been observed. Supergene oxidation overprinted the hydrothermal alteration resulting in a thick cap of residual silica and iron oxides. The ore minerals, the alteration pattern and the tectono-volcanic environment of Cerro Quema are consistent with a high sulfidation epithermal system developed in the Azuero peninsula during pre-Oligocene times.
Resumo:
Biogeochemical cycles and sedimentary records in lakes are related to climate controls on hydrology and catchment processes. Changes in the isotopic imposition of the diatom frustules (δ 18 O diatom and δ 13 C diatom ) in lacustrine sediments can be used to reconstruct palaeoclimatic and palaeoenvironmental changes. The Lago Chungará (Andean Altiplano, 18°15 ′ S, 69°10 ′ W, 4520 masl) diatomaceous laminated sediments are made up of white and green multiannual rhythmites. White laminae were formed during short-term diatom super-blooms, and are composed almost exclusively of large-sized Cyclostephanos andinus.These diatoms bloom during mixing events when recycled nutrients from the bottom waters are brought to the surface and/or when nutrients are introduced from the catchment during periods of strong runoff. Conversely, the green laminae are thought to have been deposited over several years and are composed of a mixture of diatoms (mainly smaller valves of C. andinus and Discostella stelligera ) and organic matter. These green laminae reflect the lake's hydrological recovery from a status favouring the diatom super-blooms (white laminae) towards baseline conditions. δ 18 O diatom and δ 13 C diatom from 11,990 to 11,530 cal years BP allow us to reconstruct shifts in the precipitation/evaporation ratio and changes in the lake water dissolved carbon concentration, respectively. δ 18 O diatom values indicate that white laminae formation occurred mainly during low lake level stages, whereas green laminae formation generally occurred during high lake level stages. The isotope and chronostratigraphical data together suggest that white laminae deposition is caused by extraordinary environmental events. El Niño-Southern Oscillation and changes in solar activity are the most likely climate forcing mechanisms that could trigger such events, favouring hydrological changes at interannual-to-decadal scale. This study demonstrates the potential for laminated lake sediments to document extreme pluriannual events.
Resumo:
Al Cap de Shirr e ff (Fig. 1) hi aflora una successió volcànica de com a mínim 450 m de potència, constituïda principalment per laves i, en menor proporció, bretxes vulcanoclàstiques (Fig. 2). Les laves són basalts olivínics subalcalins i andesites basàltiques, que generalment tenen un aspecte massiu. Tot i això, la successió volcànica localment forma una alternança decimètrica de nivells durs i tous, amb potències va r i a bles i presència local de discordances angulars i onlaps, que reflecteixen geometries deposicionals complexes. A la zona nord del Cap de Shirr e ff hi ha aflorament de bretxes vulcanoclàstiques d"aspecte massiu, que localment tenen intercalacions de laves...
Resumo:
This paper is an abstract of the doctoral thesis presented by the autor at the University of Barcelona on September 1983. It constitutes a regional study about the Quatemary Glacial Geology in the Ribagorca high valleys. It is the first work in relation to the geomorphology, sedimentology and stratigraphy of the glacial and related deposits in this zone of the Pyrenees. Several formations of quatemary deposits have been studied in detail (mainly in Llauset Valley and in Tall area); and the local quatemary stratigraphy is established and finally a correlation with some previously studied areas in the Pyrenees is attemped.
Resumo:
This book is one out of 8 IAEG XII Congress volumes, and deals with Landslide processes, including: field data and monitoring techniques, prediction and forecasting of landslide occurrence, regional landslide inventories and dating studies, modeling of slope instabilities and secondary hazards (e.g. impulse waves and landslide-induced tsunamis, landslide dam failures and breaching), hazard and risk assessment, earthquake and rainfall induced landslides, instabilities of volcanic edifices, remedial works and mitigation measures, development of innovative stabilization techniques and applicability to specific engineering geological conditions, use of geophysical techniques for landslide characterization and investigation of triggering mechanisms. Focuses is given to innovative techniques, well documented case studies in different environments, critical components of engineering geological and geotechnical investigations, hydrological and hydrogeological investigations, remote sensing and geophysical techniques, modeling of triggering, collapse, runout and landslide reactivation, geotechnical design and construction procedures in landslide zones, interaction of landslides with structures and infrastructures and possibility of domino effects. The Engineering Geology for Society and Territory volumes of the IAEG XII Congress held in Torino from September 15-19, 2014, analyze the dynamic role of engineering geology in our changing world and build on the four main themes of the congress: environment, processes, issues, and approaches.
Resumo:
A detailed analysis of the morphology and the Holocene seismic and sequence stratigraphy and architecture of the infralittoral sedimentary environment of the El Masnou coast (Catalonia, NW Mediterranean Sea) was carried out using multibeam bathymetry and GeoPulse seismic data. This environment extends down to 26-30 m water depth, and is defined morphologically by two depositional wedges whose seafloor is affected by erosive furrows, slides, fields of large- and small-scale wavy bedforms, and dredging trenches and pits. Erosive terraces are also identified in the transition domain toward the inner continental shelf. The Holocene stratigraphy of the infralittoral environment is defined by two major seismic sequences (lower and upper), each one formed by internal seismic units. The sequences and units are characterised by downlapping surfaces made up of deposits formed by progradation of coastal lithosomes. The stratigraphy and stratal architecture, displaying a retrogradational arrangement with progradational patterns of minor order, were controlled by different sea-level positions. The stratigraphic division represents the coastal response to the last fourth-order transgressive and highstand conditions, modulated by small-scale sea-level oscillations (≈1-2 m) of fith to sixth order. This study also highlights the advantage of an integrated analysis using acoustic/seismic methods for practical assessment of the anthropogenic effects on infralittoral domains based on the association of marine geological observations.
Resumo:
The main goal of the InterAmbAr reseach project is to analyze the relationships between landscape systems and human land-use strategies on mountains and littoral plains from a long-term perspective. The study adopts a high resolution analysis of small-scale study areas located in the Mediterranean region of north-eastern Catalonia. The study areas are distributed along an altitudinal transect from the high mountain (above 2000m a.s.l.) to the littoral plain of Empordà (Fig. 1). High resolution interdisciplinary research has been carried out from 2010, based on the integration of palaeoenvironmental and archaeological data. The micro-scale approach is used to understand human-environmental relationships. It allows better understanding of the local-regional nature of environmental changes and the synergies between catchment-based systems, hydro-sedimentary regimes, human mobility, land-uses, human environments, demography, etc.