Report on theorerical results of power generation and conversion

Experimental results of a new controller able to support bidirectional power flow in a full-bridge rectifier with boost-like topology are obtained. The controller is computed using port Hamiltonian passivity techniques for a suitable generalized state space averaging truncation system, which transforms the control objectives, namely constant output voltage dc-bus and unity input power factor, into a regulation problem. Simulation results for the full system show the essential correctness of the simplifications introduced to obtain the controller, although some small experimental discrepancies point to several aspects that need further improvement.

Uranium reserve, nuclear fuel cycle delusion, CO2 emission from the sea, and electricity supply: reflections after the fuel meltdown of Fukushima nuclear power units

The Great Tohoku-Kanto earthquake and resulting tsunami has brought considerable attention to the issue of the construction of new power plants. We argue in this paper, nuclear power is not a sustainable solution to energy problems. First, we explore the stock of uranium-235 and the different schemes developed by the nuclear power industry to exploit this resource. Second, we show that these methods, fast breeder and MOX fuel reactors, are not feasible. Third, we show that the argument that nuclear energy can be used to reduce CO2 emissions is false: the emissions from the increased water evaporation from nuclear power generation must be accounted for. In the case of Japan, water from nuclear power plants is drained into the surrounding sea, raising the water temperature which has an adverse affect on the immediate ecosystem, as well as increasing CO2 emissions from increased water evaporation from the sea. Next, a short exercise is used to show that nuclear power is not even needed to meet consumer demand in Japan. Such an exercise should be performed for any country considering the construction of additional nuclear power plants. Lastly, the paper is concluded with a discussion of the implications of our findings.

Application for fault location in electrical power distribution systems

Fault location has been studied deeply for transmission lines due to its importance in power systems. Nowadays the problem of fault location on distribution systems is receiving special attention mainly because of the power quality regulations. In this context, this paper presents an application software developed in Matlabtrade that automatically calculates the location of a fault in a distribution power system, starting from voltages and currents measured at the line terminal and the model of the distribution power system data. The application is based on a N-ary tree structure, which is suitable to be used in this application due to the highly branched and the non- homogeneity nature of the distribution systems, and has been developed for single-phase, two-phase, two-phase-to-ground, and three-phase faults. The implemented application is tested by using fault data in a real electrical distribution power system

A survey on voltage sag events in power systems

This paper aims to survey the techniques and methods described in literature to analyse and characterise voltage sags and the corresponding objectives of these works. The study has been performed from a data mining point of view

Unusual voltage sag event detection in power systems

Three multivariate statistical tools (principal component analysis, factor analysis, analysis discriminant) have been tested to characterize and model the sags registered in distribution substations. Those models use several features to represent the magnitude, duration and unbalanced grade of sags. They have been obtained from voltage and current waveforms. The techniques are tested and compared using 69 registers of sags. The advantages and drawbacks of each technique are listed

Estimation of zero-sequence impedance of undergrounds cables for single-phase fault location in distribution systems with electric arc

This paper focus on the problem of locating single-phase faults in mixed distribution electric systems, with overhead lines and underground cables, using voltage and current measurements at the sending-end and sequence model of the network. Since calculating series impedance for underground cables is not as simple as in the case of overhead lines, the paper proposes a methodology to obtain an estimation of zero-sequence impedance of underground cables starting from previous single-faults occurred in the system, in which an electric arc occurred at the fault location. For this reason, the signal is previously pretreated to eliminate its peaks voltage and the analysis can be done working with a signal as close as a sinus wave as possible

A hybrid method for sag source location in power network

The work presented in this paper belongs to the power quality knowledge area and deals with the voltage sags in power transmission and distribution systems. Propagating throughout the power network, voltage sags can cause plenty of problems for domestic and industrial loads that can financially cost a lot. To impose penalties to responsible party and to improve monitoring and mitigation strategies, sags must be located in the power network. With such a worthwhile objective, this paper comes up with a new method for associating a sag waveform with its origin in transmission and distribution networks. It solves this problem through developing hybrid methods which hire multiway principal component analysis (MPCA) as a dimension reduction tool. MPCA reexpresses sag waveforms in a new subspace just in a few scores. We train some well-known classifiers with these scores and exploit them for classification of future sags. The capabilities of the proposed method for dimension reduction and classification are examined using the real data gathered from three substations in Catalonia, Spain. The obtained classification rates certify the goodness and powerfulness of the developed hybrid methods as brand-new tools for sag classification

Modification of the Perrine-Baum diagram to improve the calculation of high voltage electric lines

Through the history of Electrical Engineering education, vectorial and phasorial diagrams have been used as a fundamental learning tool. At present, computational power has replaced them by long data lists, the result of solving equation systems by means of numerical methods. In this sense, diagrams have been shifted to an academic background and although theoretically explained, they are not used in a practical way within specific examples. This fact may be against the understanding of the complex behavior of the electrical power systems by students. This article proposes a modification of the classical Perrine-Baum diagram construction to allowing both a more practical representation and a better understanding of the behavior of a high-voltage electric line under different levels of load. This modification allows, at the same time, the forecast of the obsolescence of this behavior and line’s loading capacity. Complementary, we evaluate the impact of this tool in the learning process showing comparative undergraduate results during three academic years

Energy Management for Stand-Alone Renewable Energy Systems (E-MAN-RES). Simulacions de sistemes.

L’objecte del present informe és la descripció dels treballs duts a terme en l’Activitat 2 del projecte E-MAN-RES: models de simulació i càlcul per optimització i anàlisi de sensibilitat de la gestió de la demanda, per part de la Universitat Politècnica de Catalunya.

Optimal management of microgrids

Desenvolupament dels models matemàtics necessaris per a controlar de forma òptima la microxarxa existent als laboratoris del Institut de Recerca en Energia de Catalunya. Els algoritmes s'implementaran per tal de simular el comportament i posteriorment es programaran directament sobre els elements de la microxarxa per verificar el seu correcte funcionament.. Desenvolupament dels models matemàtics necessaris per a controlar de forma òptima la microxarxa existent als laboratoris del Institut de Recerca en Energia de Catalunya. Els algoritmes s'implementaran per tal de simular el comportament i posteriorment es programaran directament sobre els elements de la microxarxa per verificar el seu correcte funcionament.

Sequencing lifeline repairs after an earthquake: an economic approach

Recoveries after recent earthquakes in the U.S. and Japan have shown that large welfare gains can be achieved by reshaping current emergency plans as incentive-compatible contracts. We apply tools from the mechanisms design literature to show ways to integrate economic incentives into the management of natural disasters and discuss issues related to the application to seismic event recovery. The focus is on restoring lifeline services such as the water, gas, transportation, and electric power networks. We put forward decisional procedures that an uninformed planner could employ to set repair priorities and help to coordinate lifeline firms in the post-earthquake reconstruction.

Disseny i aplicació del protocol d'instal·lació d'energia fotovoltaica en edificis aïllats de la xarxa elèctrica al PNAP

En el perímetre del parc es troben gran nombre d’edificacions amb mancances de subministrament elèctric per la gran dispersió de la població de la comarca. L’objectiu d’aquest estudi és desenvolupar un protocol per determinar la viabilitat de l’energia fotovoltaica en edificis aïllats i aplicar-la de forma pilot a dos edificis gestionats pels responsables del Parc Natural de l’Alt Pirineu: el Centre de Logística i Manteniment (CLM) i el Refugi del Fornet. Aquests han estat escollits per la seva representativitat com a edificis aïllats de la xarxa elèctrica convencional. S’ha elaborat una metodologia pròpia, el Protocol d’instal·lació d’energia fotovoltaica en edificis aïllats de la xarxa elèctrica. S’ha realitzat una anàlisi de sensibilitats del dimensionat fotovoltaic davant la modificació de diversos paràmetres rellevants. Això ha permès determinar les característiques òptimes de viabilitat per als dos edificis en estudi i el cost de la instal·lació fotovoltaica (17.183€ el CLM i 164.815 € el Refugi del Fornet). Els resultats obtinguts en els dos edificis pilot han mostrat el gran cost relatiu entre l’energia fotovoltaica i l’energia elèctrica produïda a partir de combustibles fòssils.

Projecte d'una central d'energia elèctrica de 400 kW mitjançant concentradors solars i una turbina de vapor

L’objecte del projecte és dissenyar una central productora d’energia elèctrica a través d’una turbina de vapor i un generador acoblat a aquesta, mitjançant concentradors d’energia solar cilindro-parabòlics. Aquests concentradors captaran la radiació directa del sol per concentrar-la al focus de la paràbola, on s’hi col·locarà un receptor per l’interior del qual hi passarà un fluid que s’escalfarà gràcies a aquests raigs concentrats. En el projecte s’ha dissenyat la instal·lació i estudiat la radiació disponible a la zona, s’ha realitzat un estudi de la viabilitat de la instal·lació necessària i del cost econòmic d’una central d’energia termoelèctrica fictícia a la zona de Tarragona

Avaluació del consum d'energia eléctrica d'una indústria càrnia

L’objecte d’aquest treball ha estat avaluar el consum d’energia elèctrica de la industria BECSA, situada al municipi de Palol de Revardit i dedicada a l’elaboració de pernil curat preparat per a ser llescat industrialment. En primer lloc es va estudiar el procés productiu de la indústria i la maquinària, per tal de determinar les potencies activa i reactiva de cadascuna de les màquines. Amb les potències per una banda, i l’estudi dels temps de treball de les màquines per l’altra, es van determinar els consums d’energia activa i reactiva que suposava el procés. A partir de l’anàlisi de les dades obtingudes, les factures elèctriques, les tarifes i complements per destinació horària, es van proposar una sèrie de millores per a poder disminuir els costos del consum d’energia elèctrica de la indústria

Instal·lació d'energia fotovoltaica d'una casa de colònies

Els objectius d'aquest projecte són el disseny d'una instal·lació fotovoltaica connectada a xarxa que sigui capaç de produir la mateixa quantitat d’energia que consumeix la casa de colònies a on es troba ubicada. La particularitat d’aquesta instal·lació serà que els generadors fotovoltaics aniran sobra una plataforma giratòria que seguirà el sol buscant sempre la millor i major producció energètica. El control d'aquesta estructura anirà a càrrec d'un autòmat programable. Aprofitant l'existència de panells fotovoltaics, s'ha dissenyat un sistema d’acumulació d’energia de 2 kW de potència que dotarà de corrent una línia que, en cas de falla en el sistema d’alimentació general, es mantindrà ininterrompuda. Aquesta línia serà de 230 V i està dissenyada per tenir una autonomia de 2 hores