Design of Novel Frequency Generation Circuit with Application to Ultra-Wideband Distributed Oscillators

Given the urgence of a new paradigm in wireless digital trasmission which should allow for higher bit rate, lower latency and tigher delay constaints, it has been proposed to investigate the fundamental building blocks that at the circuital/device level, will boost the change towards a more efficient network architecture, with high capacity, higher bandwidth and a more satisfactory end user experience. At the core of each transciever, there are inherently analog devices capable of providing the carrier signal, the oscillators. It is strongly believed that many limitations in today's communication protocols, could be relieved by permitting high carrier frequency radio transmission, and having some degree of reconfigurability. This led us to studying distributed oscillator architectures which work in the microwave range and possess wideband tuning capability. As microvave oscillators are essentially nonlinear devices, a full nonlinear analyis, synthesis, and optimization had to be considered for their implementation. Consequently, all the most used nonlinear numerical techniques in commercial EDA software had been reviewed. An application of all the aforementioned techniques has been shown, considering a systems of three coupled oscillator ("triple push" oscillator) in which the stability of the various oscillating modes has been studied. Provided that a certain phase distribution is maintained among the oscillating elements, this topology permits a rise in the output power of the third harmonic; nevertheless due to circuit simmetry, "unwanted" oscillating modes coexist with the intenteded one. Starting with the necessary background on distributed amplification and distributed oscillator theory, the design of a four stage reverse mode distributed voltage controlled oscillator (DVCO) using lumped elments has been presented. All the design steps have been reported and for the first time a method for an optimized design with reduced variations in the output power has been presented. Ongoing work is devoted to model a wideband DVCO and to implement a frequency divider.

On the design of peer punishment experiments

We discuss how technologies of peer punishment might bias the results that are observed in experiments. A crucial parameter is the ���fine-to-fee��� ratio, which describes by how much the punished subjects income is reduced relatively to the fee the punishing subject has to pay to inflict punishment. We show that a punishment technology commonly used in experiments embeds a variable fine-to-fee ratio and show that it confounds the empirical findings about why, whom, and how much subjects punish.

A right to a national space of communication? : on Stateless nations, their right to a space of communication of their own

Hem establert les bases metodol��giques i te��riques per investigar la pregunta ���Tenen les nacions sense estat el dret de controlar el seu propi espai de comunicaci��?���. La investigaci�� ajusta el concepte d���espai de comunicaci�� a la teoria pol��tica, cercant els seus l��mits en els drets individuals i, des de la perspectiva del liberalisme 2, aportant la justificaci�� del seu control en quant que plataforma que incideix en la conservaci�� i superviv��ncia d���una cultura nacional. El primer article i fase de la tesi ��s l���adaptaci�� i definici�� del concepte espai de comunicaci��. Fins ara, la recerca ha proposat diferents models d���espai de comunicaci�� entenent si es tracta d���una visi�� emfatitzant la distribuci�� i la producci�� de material marcat amb els s��mbols de la identitat nacional de la societat emissora, o b�� si emfatitza la idea d���un espai de circulaci�� de fluxos comunicatiu ajustat a un territori tradicionalment vinculat a una identitat nacional o naci�� sense estat. Igualment, es distingeix la dimensi�� d���emissi�� ���sortir del territori al m��n- i la de recepci�� ���fluxos informatius rebuts des del m��n al territori, concretament, al ciutad��; el paper d���intervenci�� de les institucions democr��tiques ��s diferent en una dimensi�� o una altra i, per tant, tamb�� s��n diferents els drets afectats i les teories o principis que neguen o justifiquen el control de l���espai de comunicaci��. Tamb�� s���ha indagat en les teories sobre els efectes cognitius dels mitjans de comunicaci�� per relacionar-los amb la construcci�� nacional com a cohesi�� simb��lica i cultural. Si b�� els mitjans no poden fer canviar de pensament immediatament, s�� que poden conformar a llarg termini una percepci�� nacional general. Una comunitat ��s imaginada, donada la dist��ncia f��sica dels seus components, i la comunicaci�� social ��s, juntament amb l���educaci��, el principal factor de construcci�� nacional, avui en dia.

Educational innovation in large groups. Design of an experimental study implemented at the Polytechnic University of Madrid

The present paper shows de design of an experimental study conducted with large groups using educational innovation methodologies at the Polytechnic University of Madrid. Concretely, we have chosen the course titled "History and Politics of Sports" that belongs to the Physical Activity and Sport Science Degree. The selection of this course is because the syllabus is basically theoretical and there are four large groups of freshmen students who do not have previous experiences in a teaching-learning process based on educational innovation. It is hope that the results of this research can be extrapolated to other courses with similar characteristics.

A Tool for optimum design of Waste Water Treatment Plants under uncertainty

L���objectiu principal ��s presentar un nou prototipus d���eina per al disseny de les plantes de tractament d���aig��es residuals utilitzant models mec��nics din��mics quantificant la incertesa

Analysis and Design of a secure WLAN solution for Cobre Las Cruces

Cobre Las Cruces is a renowned copper mining company located in Sevilla, with unexpected problems in wireless communications that have a direct affectation in production. Therefore, the main goals are to improve the WiFi infrastructure, to secure it and to detect and prevent from attacks and from the installation of rogue (and non-authorized) APs. All of that integrated with the current ICT infrastructure.This project has been divided into four phases, although only two of them have been included into the TFC; they are the analysis of the current situation and the design of a WLAN solution.Once the analysis part was finished, some weaknesses were detected. Subjects such as lack of connectivity and control, ignorance about installed WiFi devices and their localization and state and, by and large, the use of weak security mechanisms were some of the problems found. Additionally, due to the fact that the working area became larger and new WiFi infrastructures were added, the first phase took more time than expected.As a result of the detailed analysis, some goals were defined to solve and it was designed a centralized approach able to cope with them. A solution based on 802.11i and 802.1x protocols, digital certificates, a probe system running as IDS/IPS and ligthweight APs in conjunction with a Wireless LAN Controller are the main features.

Application of a support system to the design of wastewater treatment plants

This paper presents a case study that explores the advantages that can be derived from the use of a design support system during the design of wastewater treatment plants (WWTP). With this objective in mind a simplified but plausible WWTP design case study has been generated with KBDS, a computer-based support system that maintains a historical record of the design process. The study shows how, by employing such a historical record, it is possible to: (1) rank different design proposals responding to a design problem; (2) study the influence of changing the weight of the arguments used in the selection of the most adequate proposal; (3) take advantage of keywords to assist the designer in the search of specific items within the historical records; (4) evaluate automatically thecompliance of alternative design proposals with respect to the design objectives; (5) verify the validity of previous decisions after the modification of the current constraints or specifications; (6) re-use the design records when upgrading an existing WWTP or when designing similar facilities; (7) generate documentation of the decision making process; and (8) associate a variety of documents as annotations to any component in the design history. The paper also shows one possible future role of design support systems as they outgrow their current reactive role as repositories of historical information and start to proactively support the generation of new knowledge during the design process

Design of homogeneous territorial units : a methodological proposal

One of the main questions to solve when analysing geographically added information consists of the design of territorial units adjusted to the objectives of the study. This is related with the reduction of the effects of the Modificable Areal Unit Problem (MAUP). In this paper an optimisation model to solve regionalisation problems is proposed. This model seeks to reduce disadvantages found in previous works about automated regionalisation tools

Design of homogeneous territorial units : a methodological proposal

One of the main questions to solve when analysing geographically added information consists of the design of territorial units adjusted to the objectives of the study. This is related with the reduction of the effects of the Modificable Areal Unit Problem (MAUP). In this paper an optimisation model to solve regionalisation problems is proposed. This model seeks to reduce disadvantages found in previous works about automated regionalisation tools

Design of electron band pass filters for electrically biased finite superlattices

We design optimal band pass filters for electrons in semiconductor heterostructures, under a uniform applied electric field. The inner cells are chosen to provide a desired transmission window. The outer cells are then designed to transform purely incoming or outgoing waves into Bloch states of the inner cells. The transfer matrix is interpreted as a conformal mapping in the complex plane, which allows us to write constraints on the outer cell parameters, from which physically useful values can be obtained.

Design of Optical Systems With Extended Depth of Field: an Educational Approach to Wavefront Coding Techniques

A practical activity designed to introduce wavefront coding techniques as a method to extend the depth of field in optical systems is presented. The activity is suitable for advanced undergraduate students since it combines different topics in optical engineering such as optical system design, aberration theory, Fourier optics, and digital image processing. This paper provides the theoretical background and technical information for performing the experiment. The proposed activity requires students able to develop a wide range of skills since they are expected to deal with optical components, including spatial light modulators, and develop scripts to perform some calculations.

Design of surface forces apparatus for tribology studies combined with nonlinear optical spectroscopy

We describe the design, calibration, and performance of surface forces apparatus with the capability of illumination of the contact interface for spectroscopic investigation using optical techniques. The apparatus can be placed in the path of a Nd-YAG laser for studies of the linear response or the second harmonic and sum-frequency generation from a material confined between the two surfaces. In addition to the standard fringes of equal chromatic order technique, which we have digitized for accurate and fast analysis, the distance of separation can be measured with a fiber-optic interferometer during spectroscopic measurements (2 �� resolution and 10 ms response time). The sample approach is accomplished through application of a motor drive, piezoelectric actuator, or electromagnetic lever deflection for variable degrees of range, sensitivity, and response time. To demonstrate the operation of the instrument, the stepwise expulsion of discrete layers of octamethylcyclotetrasiloxane from the contact is shown. Lateral forces may also be studied by using piezoelectric bimorphs to induce and direct the motion of one surface.

Discriminant ECOC: a heuristic method for application dependent design of error correcting output codes

We present a heuristic method for learning error correcting output codes matrices based on a hierarchical partition of the class space that maximizes a discriminative criterion. To achieve this goal, the optimal codeword separation is sacrificed in favor of a maximum class discrimination in the partitions. The creation of the hierarchical partition set is performed using a binary tree. As a result, a compact matrix with high discrimination power is obtained. Our method is validated using the UCI database and applied to a real problem, the classification of traffic sign images.

Needs assessment and design of the intervention for high risk sex offenders social reintegration

Executive report of the adaptation study "Needs assessment and design of the intervention for high risk sex offenders social reintegration: Adaptation of the Circles of Support and Accountability to the Penal Enforcement System of Catalonia".