Laser-induced forward transfer of liquids: Study of the droplet ejection process

Laser-induced forward transfer (LIFT) is a laser direct-write technique that offers the possibility of printing patterns with a high spatial resolution from a wide range of materials in a solid or liquid state, such as conductors, dielectrics, and biomolecules in solution. This versatility has made LIFT a very promising alternative to lithography-based processes for the rapid prototyping of biomolecule microarrays. Here, we study the transfer process through the LIFT of droplets of a solution suitable for microarray preparation. The laser pulse energy and beam size were systematically varied, and the effect on the transferred droplets was evaluated. Controlled transfers in which the deposited droplets displayed optimal features could be obtained by varying these parameters. In addition, the transferred droplet volume displayed a linear dependence on the laser pulse energy. This dependence allowed determining a threshold energy density value, independent of the laser focusing conditions, which acted as necessary conditions for the transfer to occur. The corresponding sufficient condition was given by a different total energy threshold for each laser beam dimension. The threshold energy density was found to be the dimensional parameter that determined the amount of the transferred liquid per laser pulse, and there was no substantial loss of material due to liquid vaporization during the transfer.

Cubic spline population density functions and subcentre delimitation. The case of Barcelona

The presence of subcentres cannot be captured by an exponential function. Cubic spline functions seem more appropriate to depict the polycentricity pattern of modern urban systems. Using data from Barcelona Metropolitan Region, two possible population subcentre delimitation procedures are discussed. One, taking an estimated derivative equal to zero, the other, a density gradient equal to zero. It is argued that, in using a cubic spline function, a delimitation strategy based on derivatives is more appropriate than one based on gradients because the estimated density can be negative in sections with very low densities and few observations, leading to sudden changes in estimated gradients. It is also argued that using as a criteria for subcentre delimitation a second derivative with value zero allow us to capture a more restricted subcentre area than using as a criteria a first derivative zero. This methodology can also be used for intermediate ring delimitation.

Value of clinical factors in selecting postmenopausal women with rheumatoid arthritis for bone densitometry.

Criteria to decide which patients with rheumatoid arthritis (RA) should be examined by dual energy x ray absorptiometry (DXA) are currently not available. The rheumatologists from Amsterdam have proposed preliminary criteria based on clinical risk factors (age, disease activity, and functional status). These criteria are preliminary and not widely accepted but might be helpful in practice. The value of the proposal in a group of Spanish postmenopausal women with RA is analysed. METHODS DXA (lumbar spine and femoral neck) was performed in 128 patients recruited from a clinical setting, and the proposed criteria were applied. T and Z scores were established for a Spanish reference population. RESULTS The mean (SD) age of the patients was 61.3 (10.7) and mean duration of the postmenopausal period 14.5 (10.1) years. Mean duration of RA was 13.7 (7.7) years. Mean C reactive protein was 22 (21) mg/l; mean erythrocyte sedimentation rate 26 (18) mm/1st h; and mean Health Assessment Questionnaire score 1.25 (0.79). Ninety (70%) patients fulfilled the proposed criteria. Their sensitivity for the diagnosis of osteoporosis (T score ¿¿2.5 SD) was 86% and their specificity, 43%. Positive predictive value was 54% and negative predictive value, 79%. CONCLUSIONS The proposed criteria seem a good screening method for the selection of those patients with RA whose bone mineral density should be assessed as the sensitivity and negative predictive value are acceptable.

Transformation kernel density estimation of actuarial loss functions

[cat] Es presenta un estimador nucli transformat que és adequat per a distribucions de cua pesada. Utilitzant una transformació basada en la distribució de probabilitat Beta l’elecció del paràmetre de finestra és molt directa. Es presenta una aplicació a dades d’assegurances i es mostra com calcular el Valor en Risc.

Transformation kernel density estimation of actuarial loss functions

[cat] Es presenta un estimador nucli transformat que és adequat per a distribucions de cua pesada. Utilitzant una transformació basada en la distribució de probabilitat Beta l’elecció del paràmetre de finestra és molt directa. Es presenta una aplicació a dades d’assegurances i es mostra com calcular el Valor en Risc.

Fragmentation of massive dense cores down to <~ 1000 AU: relation between fragmentation and density structure

In order to shed light on the main physical processes controlling fragmentation of massive dense cores, we present a uniform study of the density structure of 19 massive dense cores, selected to be at similar evolutionary stages, for which their relative fragmentation level was assessed in a previous work. We inferred the density structure of the 19 cores through a simultaneous fit of the radial intensity profiles at 450 and 850 μm (or 1.2 mm in two cases) and the spectral energy distribution, assuming spherical symmetry and that the density and temperature of the cores decrease with radius following power-laws. Even though the estimated fragmentation level is strictly speaking a lower limit, its relative value is significant and several trends could be explored with our data. We find a weak (inverse) trend of fragmentation level and density power-law index, with steeper density profiles tending to show lower fragmentation, and vice versa. In addition, we find a trend of fragmentation increasing with density within a given radius, which arises from a combination of flat density profile and high central density and is consistent with Jeans fragmentation. We considered the effects of rotational-to-gravitational energy ratio, non-thermal velocity dispersion, and turbulence mode on the density structure of the cores, and found that compressive turbulence seems to yield higher central densities. Finally, a possible explanation for the origin of cores with concentrated density profiles, which are the cores showing no fragmentation, could be related with a strong magnetic field, consistent with the outcome of radiation magnetohydrodynamic simulations.

Urban population density functions : the case of the Barcelona region

L'anàlisi de la densitat urbana és utilitzada per examinar la distribució espacial de la població dins de les àrees urbanes, i és força útil per planificar els serveis públics. En aquest article, s'estudien setze formes funcionals clàssiques de la relació existent entre la densitat i la distancia en la regió metropolitana de Barcelona i els seus onze subcentres.

A Methodology to measure shareholder value orientation and shareholder value creation aimed at providing a research basis to investigate the link between both magnitudes

Does shareholder value orientation lead to shareholder value creation? This article proposes methods to quantify both, shareholder value orientation and shareholder value creation. Through the application of these models it is possible to quantify both dimensions and examine statistically in how far shareholder value orientation explains shareholder value creation. The scoring model developed in this paper allows quantifying the orientation of managers towards the objective to maximize wealth of shareholders. The method evaluates information that comes from the companies and scores the value orientation in a scale from 0 to 10 points. Analytically the variable value orientation is operationalized expressing it as the general attitude of managers toward the objective of value creation, investment policy and behavior, flexibility and further eight value drivers. The value creation model works with market data such as stock prices and dividend payments. Both methods where applied to a sample of 38 blue chip companies: 32 firms belonged to the share index IBEX 35 on July 1st, 1999, one company represents the “new economy” listed in the Spanish New Market as per July 1st, 2001, and 5 European multinational groups formed part of the EuroStoxx 50 index also on July 1st, 2001. The research period comprised the financial years 1998, 1999, and 2000. A regression analysis showed that between 15.9% and 23.4% of shareholder value creation can be explained by shareholder value orientation.

Implementation of the ordinal shapley value for a three-agent economy

We propose a simple mechanism that implements the Ordinal Shapley Value (Pérez-Castrillo and Wettstein [2005]) for economies with three or less agents.

An ordinal shapley value for economic environments (Revised version)

We propose a new solution concept to address the problem of sharing a surplus among the agents generating it. The problem is formulated in the preferences-endowments space. The solution is defined recursively, incorporating notions of consistency and fairness and relying on properties satisfied by the Shapley value for Transferable Utility (TU) games. We show a solution exists, and call it the Ordinal Shapley value (OSV). We characterize the OSV using the notion of coalitional dividends, and furthermore show it is monotone and anonymous. Finally, similarly to the weighted Shapely value for TU games, we construct a weighted OSV as well.

The Instrumental voter goes to the news-agent: demand for information, election closeness, and the media

This paper studies the impact of instrumental voting on information demand and mass media behaviour during electoral campaigns. If voters act instrumentally then information demand should increase with the closeness of an election. Mass media are modeled as profit-maximizing firms that take into account information demand, the value of customers to advertisers and the marginal cost of customers. Information supply should be larger in electoral constituencies where the contest is expected to be closer, there is a higher population density, and customers are on average more profitable for advertisers. The impact of electorate size is theoretically undetermined. These conclusions are then tested with comfortable results on data from the 1997 general election in Britain.

An ordinal shapley value for economic environments

We propose a new solution concept to address the problem of sharing a surplus among the agents generating it. The sharing problem is formulated in the preferences-endowments space. The solution is defined in a recursive manner incorporating notions of consistency and fairness and relying on properties satisfied by the Shapley value for Transferable Utility (TU) games. We show a solution exists, and refer to it as an Ordinal Shapley value (OSV). The OSV associates with each problem an allocation as well as a matrix of concessions ``measuring'' the gains each agent foregoes in favor of the other agents. We analyze the structure of the concessions, and show they are unique and symmetric. Next we characterize the OSV using the notion of coalitional dividends, and furthermore show it is monotone in an agent's initial endowments and satisfies anonymity. Finally, similarly to the weighted Shapley value for TU games, we construct a weighted OSV as well.