Myofascial pain associated to trigger points: A literature review. Part 2: Differential diagnosis and treatment

During the last decades the advance in knowledge of myofascial pain has been constant in the medical and dental community. However, although several aspects have been clarified in relation to its epidemiology, clinical characteristics and etiopathogenesis, many uncertainties remain. Many clinical conditions are included in the differential diagnosis of myofascial pain associated to trigger points. A good anamnesis and clinical exploration is thus required in order to ensure correct diagnosis and treatment. Among the numerous treatments used in application to trigger points, the spray-and-stretch technique and direct injection targeted to such trigger points have been found to be the most effective options. In chronic cases, psychosocial intervention is required, due to the high incidence of mood disorders and/or anxiety observed in these patients, who in turn present a poorer prognosis. This underscores the importance of early diagnosis and treatment.

Capillary thermal desorption unit for near real-time analysis of VOCs at sub-trace levels. Application to the analysis of environmental air contamination and breath samples

A capillary microtrap thermal desorption module is developed for near real-time analysis of volatile organic compounds (VOCs) at sub-ppbv levels in air samples. The device allows the direct injection of the thermally desorbed VOCs into a chromatographic column. It does not use a second cryotrap to focalize the adsorbed compounds before entering the separation column so reducing the formation of artifacts. The connection of the microtrap to a GC–MS allows the quantitative determination of VOCs in less than 40 min with detection limits of between 5 and 10 pptv (25 °C and 760 mmHg), which correspond to 19–43 ng m−3, using sampling volumes of 775 cm3. The microtrap is applied to the analysis of environmental air contamination in different laboratories of our faculty. The results obtained indicate that most volatile compounds are easily diffused through the air and that they also may contaminate the surrounding areas when the habitual safety precautions (e.g., working under fume hoods) are used during the manipulation of solvents. The application of the microtrap to the analysis of VOCs in breath samples suggest that 2,5-dimethylfuran may be a strong indicator of a person's smoking status

Direct modulation of electroluminescence from silicon nanocrystals beyond radiative recombination rates

We propose a light emitting transistor based on silicon nanocrystals provided with 200 Mbits/ s built-in modulation. Suppression of electroluminescence from silicon nanocrystals embedded into the gate oxide of a field effect transistor is achieved by fast Auger quenching. In this process, a modulating drain signal causes heating of carriers in the channel and facilitates the charge injection into the nanocrystals. This excess of charge enables fast nonradiative processes that are used to obtain 100% modulation depths at modulating voltages of 1 V.

Evidence on the determinants of foreign direct investment: the case of three european regions

This study aims at analyzing the determinants of FDI (foreign direct investment) inflows for a group of European regions. The originality of this approach lies in the use of disaggregated regional data. First, we develop a qualitative description of our database and discuss the importance of the macroeconomic determinants in attracting FDI. Then, we provide an econometric exercise to identify the potential determinants of FDI. In spite of choosing regions presenting economic similarities, we show that regional FDI inflows rely on a combination of factors that differs from one region to another.

The nature of the Cr-C bond: direct estimation of aromaticity in Fischer carbenes

Report for the scientific sojourn at the the Philipps-Universität Marburg, Germany, from september to december 2007. For the first, we employed the Energy-Decomposition Analysis (EDA) to investigate aromaticity on Fischer carbenes as it is related through all the reaction mechanisms studied in my PhD thesis. This powerful tool, compared with other well-known aromaticity indices in the literature like NICS, is useful not only for quantitative results but also to measure the degree of conjugation or hyperconjugation in molecules. Our results showed for the annelated benzenoid systems studied here, that electron density is more concentrated on the outer rings than in the central one. The strain-induced bond localization plays a major role as a driven force to keep the more substituted ring as the less aromatic. The discussion presented in this work was contrasted at different levels of theory to calibrate the method and ensure the consistency of our results. We think these conclusions can also be extended to arene chemistry for explaining aromaticity and regioselectivity reactions found in those systems.In the second work, we have employed the Turbomole program package and density-functionals of the best performance in the state of art, to explore reaction mechanisms in the noble gas chemistry. Particularly, we were interested in compounds of the form H--Ng--Ng--F (where Ng (Noble Gas) = Ar, Kr and Xe) and we investigated the relative stability of these species. Our quantum chemical calculations predict that the dixenon compound HXeXeF has an activation barrier for decomposition of 11 kcal/mol which should be large enough to identify the molecule in a low-temperature matrix. The other noble gases present lower activation barriers and therefore are more labile and difficult to be observable systems experimentally.

Straightening out the concept of direct and indirect input requirements

Gim & Kim (1998) proposed a generalization of Jeong (1982, 1984) reinterpretation of the Hawkins-Simon condition for macroeconomic stability to off-diagonal matrix elements. This generalization is conceptually relevant for it offers a complementary view of interindustry linkages beyond final or net output influence. The extension is completely similar to the 'total flow' idea introduced by Szyrmer (1992) or the 'output-to-output' multiplier of Miller & Blair (2009). However the practical implementation of Gim & Kim is actually faulty since it confuses the appropriate order of output normalization. We provide a new and elementary solution for the correct formalization using standard interindustry accounting concepts.

Towards Direct Policy Search Reinforcement Learning for Robot Control

This paper proposes a high-level reinforcement learning (RL) control system for solving the action selection problem of an autonomous robot. Although the dominant approach, when using RL, has been to apply value function based algorithms, the system here detailed is characterized by the use of direct policy search methods. Rather than approximating a value function, these methodologies approximate a policy using an independent function approximator with its own parameters, trying to maximize the future expected reward. The policy based algorithm presented in this paper is used for learning the internal state/action mapping of a behavior. In this preliminary work, we demonstrate its feasibility with simulated experiments using the underwater robot GARBI in a target reaching task

The efficiency of direct payments versus tax reductions under uncertainty

This paper analyzes the optimal behavior of farmers in the presence of direct payments and uncertainty. In an empirical analysis for Switzerland, it confirms previously obtained theoretical results and determines the magnitude of the theoretical predicted effects. The results show that direct payments increase agricultural production between 3.7% to 4.8%. Alternatively to direct payments, the production effect of tax reductions is evaluated in order to determine its magnitude. The empirical analysis corroborates the theoretical results of the literature and demonstrates that tax reductions are also distorting, but to a substantially lesser degree if losses are not offset. However, tax reductions, independently whether losses are offset or not, lead to higher government spending than pure direct payments

Tax incentives and direct support for R&D: What do firms use and why?

This paper studies whether firms' use of R&D subsidies and R&D tax incentives is correlated to two sources of underinvestment in R&D, financing constraints and appropriability. We find that financially constrained SMEs are less likely to use R&D tax credits and more likely to obtain subsidies. SMEs using legal methods to protect their intellectual property are more likely to use tax incentives. Results are ambiguous for large firms. For both having previous experience in R&D increases the likelihood of using tax incentives, while it reduces the likelihood of using exclusively subsidies, suggesting that the latter induce entry into R&D. Results imply that direct funding and tax credits do not have the same ability to address each source of R&D underinvestment, and that on average subsidies may be better suited than tax credits at least for SMEs. From a policy perspective these tools may be complements rather than substitutes.

Management of corn stalk waste as reinforcement for polypropylene injection moulded composites

The main objective of this study was the management of corn stalk waste as reinforcement for polypropylene (PP) injection moulded composites as an alternative to wood flour and fibers. In the first step, corn stalk waste was subjected to various treatments, and four different corn stalk derivatives (flour and fibers) able to be used as reinforcement of composite materials were prepared and characterized. These derivatives are corn stalk flour, thermo-mechanical, semi-chemical, and chemical fibers. They were characterized in terms of their yield, lignin content, Kappa number, fiber length/diameter ratio, fines, coarseness, viscosity, and the length at the break of a standard sheet of paper. Results showed that the corn stalk derivatives have different physico-chemical properties. In the second step, the prepared flour and fibers were explored as a reinforcing element for PP composites. Coupled and non-coupled PP composites were prepared and tested for tensile properties. For overall trend, with the addition of a coupling agent, tensile properties of composites significantly improved, as compared with non-coupled samples. In addition, a morphological study revealed the positive effect of the coupling agent on the interfacial bonding. The composites prepared with semichemical fiber gave better results in comparison with the rest of the corn stalk derivatives due to its chemical characteristics

A new efficient approach to the direct restricted active space self-consistent field method

An implicitly parallel method for integral-block driven restricted active space self-consistent field (RASSCF) algorithms is presented. The approach is based on a model space representation of the RAS active orbitals with an efficient expansion of the model subspaces. The applicability of the method is demonstrated with a RASSCF investigation of the first two excited states of indole

Determination of the direct band-gap energy of InAlAs matched to InP by photoluminescence excitation spectroscopy

A series of InxAl1-xAs samples (0.51≪x≪0.55)coherently grown on InP was studied in order to measure the band-gap energy of the lattice matched composition. As the substrate is opaque to the relevant photon energies, a method is developed to calculate the optical absorption coefficient from the photoluminescence excitation spectra. The effect of strain on the band-gap energy has been taken into account. For x=0.532, at 14 K we have obtained Eg0=1549±6 meV

Direct and indirect subsidies in markets with system goods in the presence of externalities. Preliminary version

This paper derives a model of markets with system goods and two technological standards. An established standard incurs lower unit production costs but causes a negative externality. The paper derives the conditions for policy intervention and compares the effect of direct and indirect cost-reducing subsidies in two markets with system goods in the presence of externalities. If consumers are committed to the technology by purchasing one of the components, direct subsidies are preferable. For a medium-low cost difference between technological standards and a low externality cost it is optimal to provide a direct subsidy only to the first technology adopter. As the higher the externality cost raises, the more technology adopters should be provided with direct subsidies. This effect is robust in all extensions. In the absence of consumers commitment to a technological standard indirect and direct subsidies are both desirable. In this case, the subsidy to the first adopter is lower then the subsidy to the second adopter. Moreover, for the low cost difference between technological standards and low externality cost the fi rst fi rm chooses a superior standard without policy intervention. Finally, a perfect compatibility between components based on different technological standards enhances an advantage of indirect subsidies for medium-high externality cost and cost difference between technological standards. Journal of Economic Literature Classi fication Numbers: C72, D21, D40, H23, L13, L22, L51, O25, O33, O38. Keywords: Technological standards; complementary products; externalities; cost-reducing subsidies; compatibility.

Does direct democracy reduce the size of government? New evidence from historical data, 1890-2000

Using historical data for all Swiss cantons from 1890 to 2000, we estimate the causal effect of direct democracy on government spending. The main innovation in this paper is that we use fixed effects to control for unobserved heterogeneity and instrumental variables to address the potential endogeneity of institutions. We find that the budget referendum and lower costs to launch a voter initiative are effective tools in reducing canton level spending. However, we find no evidence that the budget referendum results in more decentralized government or a larger local government. Our instrumental variable estimates suggest that a mandatory budget referendum reduces the size of canton spending between 13 and 19 percent. A 1 percent lower signature requirement for the initiative reduces canton spending by up to 2 percent.