Standardizing admission and discharge processes to improve patient flow: A cross sectional study

Background: The aim of this study was to evaluate how hospital capacity was managed focusing on standardizing the admission and discharge processes. Methods: This study was set in a 900-bed university affiliated hospital of the National Health Service, near Barcelona (Spain). This is a cross-sectional study of a set of interventions which were gradually implemented between April and December 2008. Mainly, they were focused on standardizing the admission and discharge processes to improve patient flow. Primary administrative data was obtained from the 2007 and 2009 Hospital Database. Main outcome measures were median length of stay, percentage of planned discharges, number of surgery cancellations and median number of delayed emergency admissions at 8:00 am. For statistical bivariate analysis, we used a Chi-squared for linear trend for qualitative variables and a Wilcoxon signed ranks test and a Mann–Whitney test for non-normal continuous variables. Results: The median patients’ global length of stay was 8.56 days in 2007 and 7.93 days in 2009 (p<0.051). The percentage of patients admitted the same day as surgery increased from 64.87% in 2007 to 86.01% in 2009 (p<0.05). The number of cancelled interventions due to lack of beds was 216 patients in 2007 and 42 patients in 2009. The median number of planned discharges went from 43.05% in 2007 to 86.01% in 2009 (p<0.01). The median number of emergency patients waiting for an in-hospital bed at 8:00 am was 5 patients in 2007 and 3 patients in 2009 (p<0.01). Conclusions: In conclusion, standardization of admission and discharge processes are largely in our control. There is a significant opportunity to create important benefits for increasing bed capacity and hospital throughput.

Standardizing admission and discharge processes to improve patient flow: A cross sectional study

Background: The aim of this study was to evaluate how hospital capacity was managed focusing on standardizing the admission and discharge processes. Methods: This study was set in a 900-bed university affiliated hospital of the National Health Service, near Barcelona (Spain). This is a cross-sectional study of a set of interventions which were gradually implemented between April and December 2008. Mainly, they were focused on standardizing the admission and discharge processes to improve patient flow. Primary administrative data was obtained from the 2007 and 2009 Hospital Database. Main outcome measures were median length of stay, percentage of planned discharges, number of surgery cancellations and median number of delayed emergency admissions at 8:00¿am. For statistical bivariate analysis, we used a Chi-squared for linear trend for qualitative variables and a Wilcoxon signed ranks test and a Mann¿Whitney test for non-normal continuous variables. Results:The median patients' global length of stay was 8.56 days in 2007 and 7.93 days in 2009 (p<0.051). The percentage of patients admitted the same day as surgery increased from 64.87% in 2007 to 86.01% in 2009 (p<0.05). The number of cancelled interventions due to lack of beds was 216 patients in 2007 and 42 patients in 2009. The median number of planned discharges went from 43.05% in 2007 to 86.01% in 2009 (p<0.01). The median number of emergency patients waiting for an in-hospital bed at 8:00¿am was 5 patients in 2007 and 3 patients in 2009 (p<0.01). Conclusions: In conclusion, standardization of admission and discharge processes are largely in our control. There is a significant opportunity to create important benefits for increasing bed capacity and hospital throughput.

A noninvasive method for measuring the velocity of diffuse hydrothermal flow by tracking moving refractive index anomalies

Diffuse flow velocimetry (DFV) is introduced as a new, noninvasive, optical technique for measuring the velocity of diffuse hydrothermal flow. The technique uses images of a motionless, random medium (e.g.,rocks) obtained through the lens of a moving refraction index anomaly (e.g., a hot upwelling). The method works in two stages. First, the changes in apparent background deformation are calculated using particle image velocimetry (PIV). The deformation vectors are determined by a cross correlation of pixel intensities across consecutive images. Second, the 2-D velocity field is calculated by cross correlating the deformation vectors between consecutive PIV calculations. The accuracy of the method is tested with laboratory and numerical experiments of a laminar, axisymmetric plume in fluids with both constant and temperaturedependent viscosity. Results show that average RMS errors are ∼5%–7% and are most accurate in regions of pervasive apparent background deformation which is commonly encountered in regions of diffuse hydrothermal flow. The method is applied to a 25 s video sequence of diffuse flow from a small fracture captured during the Bathyluck’09 cruise to the Lucky Strike hydrothermal field (September 2009). The velocities of the ∼10°C–15°C effluent reach ∼5.5 cm/s, in strong agreement with previous measurements of diffuse flow. DFV is found to be most accurate for approximately 2‐D flows where background objects have a small spatial scale, such as sand or gravel

TCDI vs TCD for stroke risk prevention in children with sickle cell anemia: a cross-sectional study

Children with sickle cell anemia (SCA) are at increased risk of stroke. Elevated blood-flow velocities in the middle cerebral artery detected by Transcranial Doppler (TCD) are a good predictor of stroke risk in these children. Velocities obtained by TCD are measured by using a specific parameter, the time-averaged mean of the maximum velocity (TAMM). Children with TAMM velocities ≥200 cm/sec are at high risk of stroke, and transfusions as primary prevention might be done. Transcranial Doppler-imaging (TCDI) is now widely available and it allows the visualization of intracranial vessels.Few studies have compared the TAMM in TCD and TCDI, and no studies have established a cutoff point for TAMM in TCDI equivalent to the STOP criteria of “normal”, “conditional” and “abnormal”, which could predict a high risk of stroke in children with SCAObjectives: To compare the TAMM velocity obtained by TCDI with the TAMM velocity obtained with TCD in the middle cerebral artery, and to determine a cutoff point for TAMM in TCDI that could predict a high risk of stroke in children with SCAMethods: This study is a cross-sectional study of a diagnostic test. 78 children with sickle cell anemia between 2 to 16 years will be evaluated with both TCD and TCDI in order to determinate the TAMM with the two devices. Velocities obtained with both Doppler techniques will be compared using an intraclass correlation coefficient

Material flow accounting of Spain

Material throughput is a means of measuring the so-called social metabolism, or physical dimensions of a society’s consumption, and can be taken as an indirect and approximate indicator of sustainability. Material flow accounting can be used to test the dematerialisation hypothesis, the idea that technological progress causes a decrease in total material used (strong dematerialisation) or material used per monetary unit of output (weak dematerialisation). This paper sets out the results of a material flow analysis for Spain for the period from 1980 to 2000. The analysis reveals that neither strong nor weak dematerialisation took place during the period analysed. Although the population did not increase considerably, materials mobilised by the Spanish economy (DMI) increased by 85% in absolute terms, surpassing GDP growth. In addition, Spain became more dependent on external trade in physical terms. In fact, its imports are more than twice the amount of its exports in terms of weight.

Material flow accounting of Mexico (1970-2003)

This technical background paper describes the methods applied and data sources used in the compilation of the 1980-2003 data set for material flow accounts of the Mexican economy and presents the data set. It is organised in four parts: the first part gives an overview of the Material Flow Accounting (MFA) methodology. The second part presents the main material flows of the Mexican economy including biomass, fossil fuels, metal ores, industrial minerals and, construction minerals. The aim of this part is to explain the procedures and methods followed, the data sources used as well as providing a brief evaluation of the quality and reliability of the information used and the accounts established. Finally, some conclusions will be provided.

Material Flow Accounting in Chile, Ecuador, Mexico and Peru (1980-2000)

In this paper we compare the resource flows of Chile, Ecuador, Mexico and Peru between 1980 and 2000. In this time span, the domestic extraction of materials increased in the four countries, mainly due to the mining sector in Chile and Peru, biomass and oil in Ecuador and construction minerals in Mexico. Imports and exports increased too, due to the increasing integration in the international markets, prompted by the liberalization policies undertaken by the four countries between the late 1970s and the late 1990s. The four countries had a negative physical trade balance for most of the period analyzed, meaning that their exports exceeded their imports in terms of weight. However, the increase of imports reduced the physical deficit in Chile, Mexico and Peru. Ecuador’s physical deficit was the highest and did not decrease in the period analyzed. Also, a diversification of exports away from bulk commodities could be observed in Chile and Mexico, and to a lesser extent in Peru, whereas in Ecuador the export sector remained mainly based on oil and biomass. More research is needed to explore the environmental effects of this phenomenon. Also, the indirect flows associated to the direct physical flows deserve to be subject to further analysis.

Creating the Gorizia-Goriska euroregion: an European cross-border administrative model for integrated socio-economic development in the upper adriatic. Crossborder co-operation as a tool for trans-national integration and conflict resolution

Contribució al Seminari: "Les Euroregions: Experiències i aprenatges per a l’Euroregió Pirineus-Mediterrània", 15-16 de desembre de 2005

Cross-border co-operation in Europe

Contribució al Seminari: "Les Euroregions: Experiències i aprenatges per a l’Euroregió Pirineus-Mediterrània", 15-16 de desembre de 2005

Cross-section data, disequilibrium situations and estimated coefficients: evidence from car ownership demand

The objective of this paper is to analyse to what extent the use of cross-section data will distort the estimated elasticities for car ownership demand when the observed variables do not correspond to a state equilibrium for some individuals in the sample. Our proposal consists of approximating the equilibrium values of the observed variables by constructing a pseudo-panel data set which entails averaging individuals observed at different points of time into cohorts. The results show that individual and aggregate data lead to almost the same value for income elasticity, whereas with respect to working adult elasticity the similarity is less pronounced.

Juridical double taxation by cross border transactions: the Block Case (C-67/08)

Treaty Establishing the European Community, operative until December 1st 2009, had already established in its article 2 the mission of the up until then European Community and actual European Union is to promote an harmonious, equilibrated and sustainable development of the economic activities of the whole Community. This Mission must be achieved by establishing a Common Market, an Economic and Monetary Union and the realization of Common Policies. One of the instruments to obtain these objectives is the use of free circulation of people, services and capitals inside the Common and Interior Market of the European Union. The European Union is characterized by the confirmation of the total movement of capitals, services and individuals and legal peoples’ freedom; freedom that was already predicated by the Maastricht Treaty, through the suppression of whatever obstacles which are in the way of the objectives before exposed. The old TEC in its Title III, now Title IV of the Treaty on the Functioning of the European Union, covered the free circulation of people, services and capitals. Consequently, the inclusion of this mechanism inside one of the regulating texts of the European Union indicates the importance this freedom supposes for the European Union objectives’ development. Once stood up the relevance of the free movement of people, services and capitals, we must mention that in this paper we are going to centre our study in one of these freedoms of movement: the free movement of capital. In order to analyze in detail the free movement of capital within the European framework, we are going to depart from the analysis of the existent case law of the Court of Justice of the European Union. The use of jurisprudence is basic to know how Community legislation is interpreted. For this reason, we are going to develop this work through judgements dictated by the European Union Court. This way we can observe how Member States’ regulating laws and the European Common Law affect the free movement of capital. The starting point of this paper will be the Judgement C-67/08 European Court of Justice of February 12th 2009, known as Block case. So, following the argumentation the Luxemburg Court did about the mentioned case, we are going to develop how free movement of capital could be affected by the current disparity of Member States’ legislation. This disparity can produce double taxation cases due to the lack of tax harmonized legislation within the interior market and the lack of treaties to avoid double taxation within the European Union. Developing this idea we are going to see how double taxation, at least indirectly, can infringe free movement of capital.

Cross-country polarisation in CO2 emissions per capita in the European Union: changes and explanatory factors

In this study, we analyse the degree of polarisation-a concept fundamentally different from that of inequality-in the international distribution of CO2 emissions per capita in the European Union. It is analytically relevant to examine the degree of instability inherent to a distribution and, in the analysed case, the likelihood that the distribution and its evolution will increase or decrease the chances of reaching an agreement. Two approaches were used to measure polarisation: the endogenous approach, in which countries are grouped according to their similarity in terms of emissions, and the exogenous approach, in which countries are grouped geographically. Our findings indicate a clear decrease in polarisation since the mid-1990s, which can essentially be explained by the fact that the different groups of countries have converged (i.e. antagonism among the CO2 emitters has decreased) as the contribution of energy intensity to between-group differences has decreased. This lower degree of polarisation in CO2 distribution suggests a situation more conducive to the possibility of reaching EU-wide agreements on the mitigation of CO2 emissions.

Line search multilevel optimization as computational methods for dense optical flow

We evaluate the performance of different optimization techniques developed in the context of optical flowcomputation with different variational models. In particular, based on truncated Newton methods (TN) that have been an effective approach for large-scale unconstrained optimization, we develop the use of efficient multilevel schemes for computing the optical flow. More precisely, we evaluate the performance of a standard unidirectional multilevel algorithm - called multiresolution optimization (MR/OPT), to a bidrectional multilevel algorithm - called full multigrid optimization (FMG/OPT). The FMG/OPT algorithm treats the coarse grid correction as an optimization search direction and eventually scales it using a line search. Experimental results on different image sequences using four models of optical flow computation show that the FMG/OPT algorithm outperforms both the TN and MR/OPT algorithms in terms of the computational work and the quality of the optical flow estimation.

An approximate solution method for boundary layer flow of a power law fluid over a flat plate

The work in this paper deals with the development of momentum and thermal boundary layers when a power law fluid flows over a flat plate. At the plate we impose either constant temperature, constant flux or a Newton cooling condition. The problem is analysed using similarity solutions, integral momentum and energy equations and an approximation technique which is a form of the Heat Balance Integral Method. The fluid properties are assumed to be independent of temperature, hence the momentum equation uncouples from the thermal problem. We first derive the similarity equations for the velocity and present exact solutions for the case where the power law index n = 2. The similarity solutions are used to validate the new approximation method. This new technique is then applied to the thermal boundary layer, where a similarity solution can only be obtained for the case n = 1.

Growth in a Cross-Section of Cities: Location, Increasing Returns or Random Growth?

This article analyzes empirically the main existing theories on income and population city growth: increasing returns to scale, locational fundamentals and random growth. To do this we implement a threshold nonlinearity test that extends standard linear growth regression models to a dataset on urban, climatological and macroeconomic variables on 1,175 U.S. cities. Our analysis reveals the existence of increasing returns when per-capita income levels are beyond $19; 264. Despite this, income growth is mostly explained by social and locational fundamentals. Population growth also exhibits two distinct equilibria determined by a threshold value of 116,300 inhabitants beyond which city population grows at a higher rate. Income and population growth do not go hand in hand, implying an optimal level of population beyond which income growth stagnates or deteriorates