Creació d'un CMS

Aquesta memòria tracta sobre el desenvolupament d'un gestor de continguts o CMS per tal de gestionar pàgines web de centres educatius d'una manera fàcil, ràpida i econòmica. Al llarg de la memòria s'explica l'estructura que segueixen tots els elements de la pàgina (base de dades, disseny web i scripts) així com els requeriments necessaris per dur a terme i gestionar el projecte correctament.

Development of advanced silicon radiation detectors for high energy physics and medical imaging

The 1st chapter of this work presents the different experiments and collaborations in which I am involved during my PhD studies of Physics. Following those descriptions, the 2nd chapter is dedicated to how the radiation affects the silicon sensors, as well as some experimental measurements carried out at CERN (Geneve, Schwitzerland) and IFIC (Valencia, Spain) laboratories. Besides the previous investigation results, this chapter includes the most recent scientific papers appeared in the latest RD50 (Research & Development #50) Status Report, published in January 2007, as well as some others published this year. The 3rd and 4th are dedicated to the simulation of the electrical behavior of solid state detectors. In chapter 3 are reported the results obtained for the illumination of edgeless detectors irradiated at different fluences, in the framework of the TOSTER Collaboration. The 4th chapter reports about simulation design, simulation and fabrication of a novel 3D detector developed at CNM for ions detection in the future ITER fusion reactor. This chapter will be extended with irradiation simulations and experimental measurements in my PhD Thesis.

E-learning : implementació d'un CMS per a la gestió d'un Campus Virtual

L'objectiu d'aquest treball consisteix a elegir una eina de gestió de continguts per a l'aplicació en la gestió d'un campus virtual. L'estudi de les característiques de diversos dels CMS més emprats ens permetrà, a més, acostar-nos-hi d'una manera pràctica, atès que una part del treball inclou, després de la tria del CMS, la seva instal·lació en un servidor a Internet i la configuració pertinent per a adequar-lo als rols d'administradors, professors, estudiants, etc.

Desarrollo de un portal web con el CMS DotNetNuke

Memoria, presentación en vídeo y producto desarrollado del trabajo/proyecto fin de Carrera de la titulación de Ingeniería en Informática, consistente en la realización de un portal web para una pyme ficticia de nombre VendetArte dedicada a la representación de artesanos. El portal web ha sido desarrollado con el gestor de contenidos (CMS) DotNetNuke que trabaja bajo plataforma .NET

Alarma d'incendis amb detectors sense fils

L'objectiu d'aquest treball de final de carrera és desenvolupar un sistema d'alarma contra incendis basat en tecnologia WSN (xarxa de sensors sense fils).

Anàlisi d'accessibilitat en entorns cms

El treball consisteix en l'avaluació d'accessibilitat de dos cms i la configuració dels mateixos perquè arribin a una versió el més accessible possible.

Parametrización de CMS para análisis sanguíneos

El proyecto ha consistido en la implantación de una web para DBSS, con doble finalidad: una pública de información general sobre la misma y otra privada para la automatización de la entrada de datos de análisis de sangre y su posterior consulta por parte del paciente. Se han seleccionado las tecnologías adecuadas tanto para el diseño de la web como de las bases de datos asociadas. Se han programado la web y las bases de datos con éxito y se ha realizado la implementación del sistema, realizándose pruebas de funcionamiento internas y externas con éxito, comprobándose la bondad de la aplicación.

Low noise pixel detectors based on gated geiger mode avalanche photodiodes

The gated operation is proposed as an effective method to reduce the noise in pixel detectors based on Geiger mode avalanche photodiodes. A prototype with the sensor and the front-end electronics monolithically integrated has been fabricated with a conventional HV-CMOS process. Experimental results demonstrate the increase of the dynamic range of the sensor by applying this technique.

Impedance field and transition from thermal to shot noise in Cd1-xZnxTe semi-insulating Ohmic detectors

Within a drift-diffusion model we investigate the role of the self-consistent electric field in determining the impedance field of a macroscopic Ohmic (linear) resistor made by a compensated semi-insulating semiconductor at arbitrary values of the applied voltage. The presence of long-range Coulomb correlations is found to be responsible for a reshaping of the spatial profile of the impedance field. This reshaping gives a null contribution to the macroscopic impedance but modifies essentially the transition from thermal to shot noise of a macroscopic linear resistor. Theoretical calculations explain a set of noise experiments carried out in semi-insulating CdZnTe detectors.

Thermal and back-action noises in dual-sphere gravitational-wave detectors

We study the sensitivity limits of a broadband gravitational-wave detector based on dual resonators such as nested spheres. We determine both the thermal and back-action noises when the resonators displacements are read out with an optomechanical sensor. We analyze the contributions of all mechanical modes, using a new method to deal with the force-displacement transfer functions in the intermediate frequency domain between the two gravitational-wave sensitive modes associated with each resonator. This method gives an accurate estimate of the mechanical response, together with an evaluation of the estimate error. We show that very high sensitivities can be reached on a wide frequency band for realistic parameters in the case of a dual-sphere detector.

Dynamic range extension of SiPM detectors with the time-gated operation

The silicon photomultiplier (SiPM) is a novel detector technology that has undergone a fast development in the last few years, owing to its single-photon resolution and ultra-fast response time. However, the typical high dark count rates of the sensor may prevent the detection of low intensity radiation fluxes. In this article, the time-gated operation with short active periods in the nanosecond range is proposed as a solution to reduce the number of cells fired due to noise and thus increase the dynamic range. The technique is aimed at application fields that function under a trigger command, such as gated fluorescence lifetime imaging microscopy.

Dynamic range extension of SiPM detectors with the time-gated operation

The silicon photomultiplier (SiPM) is a novel detector technology that has undergone a fast development in the last few years, owing to its single-photon resolution and ultra-fast response time. However, the typical high dark count rates of the sensor may prevent the detection of low intensity radiation fluxes. In this article, the time-gated operation with short active periods in the nanosecond range is proposed as a solution to reduce the number of cells fired due to noise and thus increase the dynamic range. The technique is aimed at application fields that function under a trigger command, such as gated fluorescence lifetime imaging microscopy.

Readout electronics for low dark count pixel detectors based on geiger mode avalanche photodiodes fabricated in conventional CMOS technologies for future linear colliders

The high sensitivity and excellent timing accuracy of Geiger mode avalanche photodiodes makes them ideal sensors as pixel detectors for particle tracking in high energy physics experiments to be performed in future linear colliders. Nevertheless, it is well known that these sensors suffer from dark counts and afterpulsing noise, which induce false hits (indistinguishable from event detection) as well as an increase of the necessary area of the readout system. In this work, we present a comparison between APDs fabricated in a high voltage 0.35 µm and a high integration 0.13 µm commercially available CMOS technologies that has been performed to determine which of them best fits the particle collider requirements. In addition, a readout circuit that allows low noise operation is introduced. Experimental characterization of the proposed pixel is also presented in this work.

Thermal tests on the LISA pathfinder engineering model

Report for the scientific sojourn carried out at Albert Einstein Institut in Germany, from April to July 2006.

Construcció d’un microrobot

Treball de recerca realitzat per un alumne d’ensenyament secundari i guardonat amb un Premi CIRIT per fomentar l'esperit científic del Jovent l’any 2006. La construcció d'un microrobot autònom capaç de realitzar una funció per ell mateix, ha permès exposar una introducció en el món de l'electrònica i la mecànica pràctiques. Es tracta d’un microrobot rastrejador: capaç de seguir una línia pintada al terra, per mitjà d'unes entrades (sensors detectors de llum), una lògica (C.I. operacionals) i uns motors motrius comandats per mitjà d'un C.I. driver. S’adjunten imatges dels resultats.