Comments on "On the relationship between fractal dimension and the performance of multi-resonant dipole antennas using Koch curves"

Comentaris referits a l'article següent: K. J. Vinoy, J. K. Abraham, and V. K. Varadan, “On the relationshipbetween fractal dimension and the performance of multi-resonant dipoleantennas using Koch curves,” IEEE Transactions on Antennas and Propagation, 2003, vol. 51, p. 2296–2303.

Smart antennas in software radio base stations

The application of adaptive antenna techniques to fixed-architecture base stations has been shown to offer wide-ranging benefits, including interference rejection capabilities or increased coverage and spectral efficiency.Unfortunately, the actual implementation ofthese techniques to mobile communication scenarios has traditionally been set back by two fundamental reasons. On one hand, the lack of flexibility of current transceiver architectures does not allow for the introduction of advanced add-on functionalities. On the other hand, theoften oversimplified models for the spatiotemporal characteristics of the radio communications channel generally give rise toperformance predictions that are, in practice, too optimistic. The advent of software radio architectures represents a big step toward theintroduction of advanced receive/transmitcapabilities. Thanks to their inherent flexibilityand robustness, software radio architecturesare the appropriate enabling technology for theimplementation of array processing techniques.Moreover, given the exponential progression ofcommunication standards in coexistence andtheir constant evolution, software reconfigurabilitywill probably soon become the only costefficientalternative for the transceiverupgrade. This article analyzes the requirementsfor the introduction of software radio techniquesand array processing architectures inmultistandard scenarios. It basically summarizesthe conclusions and results obtained withinthe ACTS project SUNBEAM,1 proposingalgorithms and analyzing the feasibility ofimplementation of innovative and softwarereconfigurablearray processing architectures inmultistandard settings.

Smart antennas: state of the art

Aim of this contribution is to illustrate the state of the art of smart antenna research from several perspectives. The bow is drawn from transmitter issues via channel measurements and modeling, receiver signal processing, network aspects, technological challenges towards first smart antenna applications and current status of standardization. Moreover, some future prospects of different disciplines in smart antenna research are given.

Determinants of Broadband Access: Is Platform Competition always the Key Variable to Success?

Previous studies have identified the rivalry among technological platforms as one of the main driving forces of broadband services penetration. This paper draws on data from the Spanish market between 2005 and 2011 to estimate the main determinants of broadband prices. Controlling for broadband tariffs features and network variables, we examine the impact of the different modes of competition on prices. We find that inter-platform competition has no significant effects over prices, while intra-platform competition is a key driver of the prices charged in the broadband market. Our analysis suggests that the impact of different types of competition on prices is critically affected by the levels of development of the broadband market achieved by the considered country

Broadband prices in the European Union : competition and commercial strategies

This paper analyses the determinants of broadband Internet access prices in a group of 15 EU countries between 2008 and 2011. Using a rich panel dataset of broadband plans, we show the positive effect of downstream speed on prices, and report that cable and fibre-to-the-home technologies are available at lower prices per Mbps than x DSL technology. Operators’marketing strategies are also analysed as we show how much prices rise when the broadband service is offered in a bundle with voice telephony and/or television, and how much they fall when download volume caps are included. The most insightful results of this study are provided by a group of metrics that represent the situation of competition and entry patterns in the broadband market. We show that consumer segmentation positively affects prices. On the other hand, broadband prices are higher in countries where entrants make greater use of bitstream access and lower when they use more intensively direct access -local loop unbundling-. However, we do not find a significant effect of inter-platform competition on prices.

A broadband leptonic model for gamma-ray emitting microquasars

Observational and theoretical studies point to microquasars (MQs) as possible counterparts of a significant fraction of the unidentified gamma-ray sources detected so far. At present, a proper scenario to explain the emission beyond soft X-rays from these objects is not known, nor what the precise connection is between the radio and the high-energy radiation. We develop a new model where the MQ jet is dynamically dominated by cold protons and radiatively dominated by relativistic leptons. The matter content and power of the jet are both related with the accretion process. The magnetic field is assumed to be close to equipartition, although it is attached to and dominated by the jet matter. For the relativistic particles in the jet, their maximum energy depends on both the acceleration efficiency and the energy losses. The model takes into account the interaction of the relativistic jet particles with the magnetic field and all the photon and matter fields. Such interaction produces significant amounts of radiation from radio to very high energies through synchrotron, relativistic Bremsstrahlung, and inverse Compton (IC) processes. Variability of the emission produced by changes in the accretion process (e.g. via orbital eccentricity) is also expected. The effects of the gamma-ray absorption by the external photon fields on the gamma-ray spectrum have been taken into account, revealing clear spectral features that might be observed. This model is consistent to the accretion scenario, energy conservation laws, and current observational knowledge, and can provide deeper physical information of the source when tested against multiwavelength data.

Despliegue y análisis de la cobertura de una red WiMAX basada en IEEE 802.16-2004

Aquest projecte tracta de l’estudi de la cobertura WiMAX basada en la variant 802.16-2004 en la que opera a 3.5 GHz en diferents escenaris d’un campus universitari. Primerament es realitza una introducció general a WiMAX i es defineixen els equips utilitzats. Posteriorment es comença a dur a terme un estudi de la cobertura WiMAX en diferents escenaris: indoor y outdoor per tal de poder extreure models empírics simplificats de path loss a partir de mesures realitzades amb els terminals WiMAX. Per últim, s’introdueix al projecte InterRural del Ministeri d'Indústria, Turisme i Comerç dut a terme durant els mesos Octubre 2007 - Març 2008 amb altres empreses col·laboradores: Telefònica, Hispasat, Gigle i Iber-X. La finalitat del projecte InterRural és comparar diferents tecnologies wireless de banda ample com alternatives per un bucle local ràdio de la última milla. En concret es comparen experimentalment les tecnologies WiMAX i WiFI 802.11a en diferents escenaris: LOS i NLOS.

Impacte visual aeri a Argentona

Treball de recerca realitzat per un alumne d'ensenyament secundari i guardonat amb un Premi CIRIT per fomentar l'esperit cientí­fic del Jovent l'any 2009. Aquest treball té com a finalitat millorar l'entorn aeri d'Argentona, un poble situat a la comarca del Maresme. Els elements que creen més impacte visual aeri són les antenes en desús i el cablejat no soterrat. S'han buscat propostes per canviar aquesta situació: la retirada de les antenes, aprofitant l'arribada de la TDT, i el soterrament del cablejat aeri. Donat que ambdues accions afectarien al municipi i a la seva població, s'ha considerat necessari incloure una enquesta, per a conèixer l'opinió dels argentonins, i dues entrevistes, a l'alcalde i a l'enginyer municipal, per conèixer la postura oficial.

Diseño de antenas UHF para aplicaciones RFID

Aquest projecte es basa en l'estudi, disseny i avaluació d'antenes per a aplicacions RFID a la banda UHF. Les etiquetes RFID estan compostes per un xip i una antena que han de presentar una bona adaptació per a aconseguir màxima transferència de potència. Els dos objectius principals en els diferents fases de disseny de cada antena han estat optimitzar les seves dimensions, i incrementar l'ample de banda.

Anàlisi de radiació en vaixells i disseny d'una antena en la banda d'HF

El projecte està dividit en dues parts, per una banda l’anàlisi de radiació en vaixells i per altra banda el disseny d’una antena en la banda d’ HF. La primera part s’inicia amb un estudi de l’escenari marítim a nivell de comunicacions, vaixells i antenes i, a continuació, s’estudia el camp proper sobre les superfícies del vaixell per al posicionament d’antenes amb el màxim aïllament. La segona part tracta el disseny d’una antena en HF a 6 MHz partint d’una antena tipus ranura, de baix perfil. Per validar el seu funcionament es construeix i mesura un prototipus en la banda d’UHF (2 GHz).

Agrupación de antenas microstrip para un receptor SAR biestático

El objetivo de este proyecto es el diseño de las antenas para el receptor de un radar de apertura sintética biestáticos (SAR). Estas antenas tendrán que maximizar la ganancia con la restricción de maximizar también el campo de visión del radar. Esto quiere decir, que la antena tendrá que tener un ancho de banda relativamente grande en uno de sus planos principales y relativamente estrecho en el otro plano. Con el propósito de diseñar una agrupación de antenas para un receptor SAR biestático, en este documento se analiza la tecnología microstrip orientada a las antenas y la teoría de las agrupaciones de antenas, se diseñan antenas de doble polarización, se estudian agrupaciones de antenas microstrip que cumplan con las especificaciones, se presentan redes de alimentaciones para dichas agrupaciones y se fabrica y mide una agrupación de antenas con doble polarización.

Control of optical fields and single photon emitters by advanced nanoantenna structures

The control of optical fields on the nanometre scale is becoming an increasingly important tool in many fields, ranging from channelling light delivery in photovoltaics and light emitting diodes to increasing the sensitivity of chemical sensors to single molecule levels. The ability to design and manipulate light fields with specific frequency and space characteristics is explored in this project. We present an alternative realisation of Extraordinary Optical Transmission (EOT) that requires only a single aperture and a coupled waveguide. We show how this waveguide-resonant EOT improves the transmissivity of single apertures. An important technique in imaging is Near-Field Scanning Optical Microscopy (NSOM); we show how waveguide-resonant EOT and the novel probe design assist in improving the efficiency of NSOM probes by two orders of magnitude, and allow the imaging of single molecules with an optical resolution of as good as 50 nm. We show how optical antennas are fabricated into the apex of sharp tips and can be used in a near-field configuration.

Caracterización de materiales en banda W

Para medir los coeficientes de transmisión y reflexión, S21 y S11, de diferentes materiales o muestras planas, se usa un sistema de toma de medidas en espacio libre operando banda W (75 – 110 GHz). Usando estos parámetros, S21 y S11, podemos calcular la permitividad dieléctrica relativa compleja (Er ) y la permeabilidad magnética relativa compleja (μr) mediante un proceso llamado NRW (Nicolson-Ross-Weir). El sistema para medir consiste en dos antenas de bocina, una transmisora y otra receptora, dos espejos con los que obtenemos una onda plana para medir las propiedades del material y un ordenador o dispositivo que calcula los resultados. Este dispositivo requiere de calibración para la obtención de resultados óptimos. Dicho sistema se puede simular de manera ideal con un software llamado ADS (Assistance Design System) para el estudio y comparación de grosores, permitividades dieléctricas relativas y permeabilidades magnéticas relativas de los materiales en función de la frecuencia.

Metodologia per a la generació de consens social en el desplegament d'infraestructures de telefonia mòbil

Aquest document de treball es centra específicament en el desenvolupament de la infraestructura de telefonia mòbil a Catalunya com a exemple de tecnologia amb profundes implicacions socials. Esdevé un intent inicial de definir les principals línies de recerca en aquest tema. El projecte que el sosté és emmarcat en el programa de recerca Negrisc, centrat a examinar la negociació del risc en les tecnologies de la informació i de la comunicació. Parteix d'una aproximació que reconeix la natura multidisciplinària del risc i que, per tant, exigeix una aproximació interdisciplinària al seu estudi i a la gestió subsegüent. Aquesta perspectiva emfatitza la necessitat d'integrar els punts de vista dels diferents stakeholders, incloent-hi el públic, en la gestió d'una tecnologia socialment controvertida. Aquest és un pas necessari per a permetre la generació d'algun tipus de consens en el cas del desenvolupament de la infraestructura de telefonia mòbil a Catalunya.

Resource dimensioning aspect of heterogeneous traffic with different service requirements: Integration versus segregation

In this paper, we consider the ATM networks in which the virtual path concept is implemented. The question of how to multiplex two or more diverse traffic classes while providing different quality of service requirements is a very complicated open problem. Two distinct options are available: integration and segregation. In an integration approach all the traffic from different connections are multiplexed onto one VP. This implies that the most restrictive QOS requirements must be applied to all services. Therefore, link utilization will be decreased because unnecessarily stringent QOS is provided to all connections. With the segregation approach the problem can be much simplified if different types of traffic are separated by assigning a VP with dedicated resources (buffers and links). Therefore, resources may not be efficiently utilized because no sharing of bandwidth can take place across the VP. The probability that the bandwidth required by the accepted connections exceeds the capacity of the link is evaluated with the probability of congestion (PC). Since the PC can be expressed as the CLP, we shall simply carry out bandwidth allocation using the PC. We first focus on the influence of some parameters (CLP, bit rate and burstiness) on the capacity required by a VP supporting a single traffic class using the new convolution approach. Numerical results are presented both to compare the required capacity and to observe which conditions under each approach are preferred