Analog circuit for real-time computation of respiratory mechanical impedance in sleep studies

The aim of this work was to develop a low-cost circuit for real-time analog computation of the respiratory mechanical impedance in sleep studies. The practical performance of the circuit was tested in six patients with obstructive sleep apnea. The impedance signal provided by the analog circuit was compared with the impedance calculated simultaneously with a conventional computerized system. We concluded that the low-cost analog circuit developed could be a useful tool for facilitating the real-time assessment of airway obstruction in routine sleep studies.

Analog circuit for real-time computation of respiratory mechanical impedance in sleep studies

The aim of this work was to develop a low-cost circuit for real-time analog computation of the respiratory mechanical impedance in sleep studies. The practical performance of the circuit was tested in six patients with obstructive sleep apnea. The impedance signal provided by the analog circuit was compared with the impedance calculated simultaneously with a conventional computerized system. We concluded that the low-cost analog circuit developed could be a useful tool for facilitating the real-time assessment of airway obstruction in routine sleep studies.

Desplegament dels circuits dedicats de 1 i 10 Gbps entre el PIC i el CERN

Aquest projecte consisteix a realitzar el disseny i desplegament d'una connexió entre el Port d'Informació Científica (PIC) i el Consell Europeu per a la Recerca Nuclear (CERN) sobre un circuit dedicat amb una velocitat de transferència de 10 Gbps. En una primera fase el desplegament de la connexió es realitza sobre un circuit dedicat de 1 Gbps. El projecte implica la certificació dels circuits dedicats de 1 i 10 Gbps i el disseny dels plans d'actuació que han de permetre la integració de les noves connexions dins la xarxa i els serveis del PIC.

Cortical mapping of the neuronal circuits modulating the muscle tone. Introduction to the electrophysiological treatment of the spastic hand.

L’objectiu d’aquest estudi es investigar l’organització cortical junt amb la connectivitat còrtico-subcortical en subjectes sans, com a estudi preliminar. Els mapes corticals s’han fet per TMS navegada, i els punts motors obtinguts s’han exportant per estudi tractogràfic i anàlisi de las seves connexions. El coneixement precís de la localització de l’àrea cortical motora primària i les seves connexions es la base per ser utilitzada en estudis posteriors de la reorganització cortical i sub-cortical en pacients amb infart cerebral. Aquesta reorganització es deguda a la neuroplasticitat i pot ser influenciada per els efectes neuromoduladors de la estimulació cerebral no invasiva.

CODAMAT: a modern analogue techinque for compositional data

The quantitative estimation of Sea Surface Temperatures from fossils assemblages is afundamental issue in palaeoclimatic and paleooceanographic investigations. TheModern Analogue Technique, a widely adopted method based on direct comparison offossil assemblages with modern coretop samples, was revised with the aim ofconforming it to compositional data analysis. The new CODAMAT method wasdeveloped by adopting the Aitchison metric as distance measure. Modern coretopdatasets are characterised by a large amount of zeros. The zero replacement was carriedout by adopting a Bayesian approach to the zero replacement, based on a posteriorestimation of the parameter of the multinomial distribution. The number of modernanalogues from which reconstructing the SST was determined by means of a multipleapproach by considering the Proxies correlation matrix, Standardized Residual Sum ofSquares and Mean Squared Distance. This new CODAMAT method was applied to theplanktonic foraminiferal assemblages of a core recovered in the Tyrrhenian Sea.Kew words: Modern analogues, Aitchison distance, Proxies correlation matrix,Standardized Residual Sum of Squares

Pulse propagation sustained by noise in arrays of bistable electronic circuits

One-dimensional arrays of nonlinear electronic circuits are shown to support propagation of pulses when operating in a locally bistable regime, provided the circuits are under the influence of a global noise. These external random fluctuations are applied to the parameter that controls the transition between bistable and monostable dynamics in the individual circuits. As a result, propagating fronts become destabilized in the presence of noise, and the system self-organizes to allow the transmission of pulses. The phenomenon is also observed in weakly coupled arrays, when propagation failure arises in the absence of noise.

Comments on "On resistor-induced thermal noise in linear circuits"

Correspondència referida a l'article de R. Giannetti, publicat ibid. vol.49 p.87-88

Error probability in synchronous digital circuits due to power supply noise

This paper presents a probabilistic approach to model the problem of power supply voltage fluctuations. Error probability calculations are shown for some 90-nm technology digital circuits.The analysis here considered gives the timing violation error probability as a new design quality factor in front of conventional techniques that assume the full perfection of the circuit. The evaluation of the error bound can be useful for new design paradigms where retry and self-recoveringtechniques are being applied to the design of high performance processors. The method here described allows to evaluate the performance of these techniques by means of calculating the expected error probability in terms of power supply distribution quality.

Architectural characterization of a delta-front reservoir analogue combining ground penetrating radar and electrical resistivity tomography: Roda Sandstone (Lower Eocene, Graus-Tremp basin, Spain)

Three-dimensional reconstruction of reservoir analogues can be improved combining data from different geophysical methods. Ground Penetrating Radar (GPR) and Electrical Resistivity Tomography (ERT) data are valuable tools, since they provide subsurface information from internal architecture and facies distribution of sedimentary rock bodies, enabling the upgrading of depositional models and heterogeneity reconstruction. The Lower Eocene Roda Sandstone is a well-known deltaic complex widely studied as a reservoir analogue that displays a series of sandstone wedges with a general NE to SW progradational trend. To provide a better understanding of internal heterogeneity of a 10m-thick progradational delta-front sandstone unit, 3D GPR data were acquired. In addition, common midpoints (CMP) to measure the sandstone subsoil velocity, test profiles with different frequency antennas (25, 50 and 100MHz) and topographic data for subsequent correction in the geophysical data were also obtained. Three ERT profiles were also acquired to further constrain GPR analysis. These geophysical results illustrate the geometry of reservoir analogue heterogeneities both depositional and diagenetic in nature, improving and complementing previous outcrop-derived data. GPR interpretation using radar stratigraphy principles and attributes analysis provided: 1)tridimensional geometry of major stratigraphic surfaces that define four units in the GPR Prism, 2) image the internal architecture of the units and their statistical study of azimuth and dips, useful for a quick determination of paleocurrent directions. These results were used to define the depositional architecture of the progradational sandbody that shows an arrangement in very-high-frequency sequences characterized by clockwise paleocurrent variations and decrease of the sedimentary flow, similar to those observed at a greater scale in the same system. This high-frequency sequential arrangement has been attributed to the autocyclic dynamics of a supply-dominated delta- front where fluvial and tidal currents are in competition. The resistivity models enhanced the viewing of reservoir quality associated with cement distribution caused by depositional and early diagenetic processes related to the development of transgressive and regressive systems tracts in igh-frequency sequences.

Improving the efficiency of PV low-power processing circuits by selecting an optimal inductor current of the DC/DC converter

In the context of autonomous sensors powered by small-size photovoltaic (PV) panels, this work analyses how the efficiency of DC/DC-converter-based power processing circuits can be improved by an appropriate selection of the inductor current that transfers the energy from the PV panel to a storage unit. Each component of power losses (fixed, conduction and switching losses) involved in the DC/DC converter specifically depends on the average inductor current so that there is an optimal value of this current that causes minimal losses and, hence, maximum efficiency. Such an idea has been tested experimentally using two commercial DC/DC converters whose average inductor current is adjustable. Experimental results show that the efficiency can be improved up to 12% by selecting an optimal value of that current, which is around 300-350 mA for such DC/DC converters.

Platinum Electrodeposition in an Ionic Liquid Analogue. Solvent Stability Monitoring

The use of ionic liquid analogues as solvents has increased in order to substitute the aqueous solvents in some applications in which the side reactions are undesirable. However these solvents prepared from the mixture in the eutectic proportion of species establishing hydrogen bonds are susceptible of electrochemical reactions. The study of platinum deposition on vitreous carbon in an ionic liquid analogue (2 urea: choli ne chloride) is presented; the electrochemical study has permitted to interpret the sequence of the metal deposition process and simultaneously to analyze the behavior of the ionic liquid analogue along the process. Reduction reactions of the solvent relat ed both to the electronation of choline and hydrogen formation have been detected. Different substrata have been used in order to test the possibility and the extent of these reactions depending on the nature of material. The results indicate that the feas ible electrochemical window of the substrate/solvent is highly dependent of the kind of substrate; the negative limit is tied by the massive hydrogen reaction, reaction enhanced by the electrocatalytic character of the substrate.

Disseny d'un acoblador direccional amb metamaterials

En aquest treball es descriu el disseny d’un acoblador direccional en anell de 1.5λ, habitualment anomenat rat-race, mitjançant metamaterials. S’utilitza una línia microstrip amb gap capacitiu en sèrie i una cel·la left-handed basada en un ressonador d’anells oberts complementari (CSRR), fent així possible una reducció de la longitud de la línia de 270º en un factor 5. Gràcies a aquesta disminució de longitud, l’àrea del dispositiu és 4 vegades menor que la del rat-race convencional. La mesura mostra que el comportament és el desitjat a la freqüència d’operació.

Disseny d'un divisor de potència programable per aplicació a antenes reconfigurables

En sistemes de comunicacions moderns, es dedica un interès especial als circuits i dispositius reconfigurables, tant per aplicacions comercials com militars. Aquest interès es fonamenta en la necessitat de sistemes d'altes prestacions i en les especificacions creixentment restrictives que això suposa en un ampli ventall d'aspectes. Dins aquest marc de reconfigurabilitat i adaptabilitat s'emmcarca el disseny proposat en el present projecte: un divisor de potència variable.

Disseny i implementació hardware d'algorismes de reconeixement de caràcters per comptadors d'aigua

Aquest projecte consisteix en l'estudi, comparació i implementació en hardware d'algoritmes de reconeixement de caràcters per integrar en un sistema intel·ligent de captura d'imatges. Aquest sistema, integrat per una càmera amb format i característiques específiques i que anirà acoblat a un comptador d'aigua tradicional, en captarà imatges i les enviarà per RF al punt de recepció de la companyia. L'objectiu principal consisteix en aconseguir un disseny que redueixi al màxim la quantitat d'informació per transmetre, tenint en compte les limitacions de l'entorn.