Chemisorption of atomic aluminum on Si(111): Evidence for an adsorbate-induced relaxation based on ab initio cluster-model calculations

Interaction models of atomic Al with Si4H9, Si4H7, and Si6H9 clusters have been studied to simulate Al chemisorption on the Si(111) surface in the atop, fourfold atop, and open sites. Calculations were carried out using nonempirical pseudopotentials in the framework of the ab initio Hartree-Fock procedure. Equilibrium bond distances, binding energies for adsorption, and vibrational frequencies of the adatoms are calculated. Several basis sets were used in order to show the importance of polarization effects, especially in the binding energies. Final results show the importance of considering adatom-induced relaxation effects to specify the order of energy stabilities for the three different sites, the fourfold atop site being the preferred one, in agreement with experimental findings.

Comparative effects of macro-sized aluminum oxide and aluminum oxide nanoparticles on erythrocyte hemolysis: influence of cell source, temperature and size

Al2O3 is the most abundantly produced nanomaterial and has been used in diverse fields, including the medical, military and industrial sectors. As there are concerns about the health effects of nanoparticles, it is important to understand how they interact with cells, and specifically with red blood cells. The hemolysis induced by three commercial nano-sized aluminum oxide particles (nanopowder 13 nm, nanopowder <50 nm and nanowire 2-6 nm × 200-400 nm) was compared to aluminum oxide and has been studied on erythrocytes from humans, rats and rabbits, in order to elucidate the mechanism of action and the influence of size and shape on hemolytic behavior. The concentrations inducing 50% hemolysis (HC50) were calculated for each compound studied. The most hemolytic aluminum oxide particles were of nanopowder 13, followed by nanowire and nanopowder 50. The addition of albumin to PBS induced a protective effect on hemolysis in all the nano-forms of Al2O3, but not on Al2O3. The drop in HC50 correlated to a decrease in nanomaterial size, which was induced by a reduction of aggregation Aluminum oxide nanoparticles are less hemolytic than other oxide nanoparticles, and behave differently depending on the size and shape of the nanoparticles. The hemolytic behavior of aluminum oxide nanoparticles differs from that of aluminum oxide.

Comparative effects of macro-sized aluminum oxide and aluminum oxide nanoparticles on erythrocyte hemolysis: influence of cell source, temperature and size

Al2O3 is the most abundantly produced nanomaterial and has been used in diverse fields, including the medical, military and industrial sectors. As there are concerns about the health effects of nanoparticles, it is important to understand how they interact with cells, and specifically with red blood cells. The hemolysis induced by three commercial nano-sized aluminum oxide particles (nanopowder 13 nm, nanopowder <50 nm and nanowire 2-6 nm × 200-400 nm) was compared to aluminum oxide and has been studied on erythrocytes from humans, rats and rabbits, in order to elucidate the mechanism of action and the influence of size and shape on hemolytic behavior. The concentrations inducing 50% hemolysis (HC50) were calculated for each compound studied. The most hemolytic aluminum oxide particles were of nanopowder 13, followed by nanowire and nanopowder 50. The addition of albumin to PBS induced a protective effect on hemolysis in all the nano-forms of Al2O3, but not on Al2O3. The drop in HC50 correlated to a decrease in nanomaterial size, which was induced by a reduction of aggregation Aluminum oxide nanoparticles are less hemolytic than other oxide nanoparticles, and behave differently depending on the size and shape of the nanoparticles. The hemolytic behavior of aluminum oxide nanoparticles differs from that of aluminum oxide.

Muntatge i automatització d'un ascensor de 4 plantes

Treball de recerca realitzat per alumnes d'ensenyament secundari i guardonat amb un Premi CIRIT per fomentar l'esperit cientí­fic del Jovent l'any 2009. Les primera intenció d'aquesta recerca és unificar dues grans branques de la tecnologia com són la mecànica i l'elèctronica. Així va sorgir el projecte de construir un ascensor i provar un nou sistema de transmissió com és el vis sense fi juntament amb la introducció d'un microcontrolador del tipus PIC com a unitat central de processament. El primer pas d'aquest treball va ser el disseny d'aquest ascensor utilitzant diversos programes. Posteriorment es van encarregar aquestes peces abans dissenyades per tal de començar-ne la construcció. Aquestes peces van ser unides totalment mitjançant rebladures i altres suports mecànics. A continuació es va desenvolupar la programació del microcontrolador. El pas més important va ser l'acoblament del grup motor i el poliment dels aspectes més difícils de corregir com és el cas dels molts fregaments que patia al ser una estructura purament metàl·lica. Corregits aquests problemes i el nivell sonor, es va donar per conclòs el treball.

Desenvolupament d'eines per l'apliació de l'aprenentatge basat en projectes a l'enginyeria tècnica de telecomunicacions

El projecte d'innovació docent s'emmarca dintre de la línia de treball de l'Escola Politècnica Superior de Castelldefels. Aquesta escola, des de els seus inicis ha destacat per la seva aposta per la innovació docent i l'aplicació de mètodes pedagògics pioners arreu d'Espanya. El sistema d'ensenyament basat en el seguiment individualitzat de l'estudiant, facilitat per una bona relació professor/nombre d'estudiants (grups de 40 o 20 estudiants), l'avaluació continuada, que parteix de les activitats acadèmiques realitzades en una matèria, i l'avaluació curricular, que atén el rendiment global de l'estudiant, fan que el sistema fomenti el treball regular al mateix temps que l'informa en tot moment del seu progrés acadèmic. Per un altre banda, dintre del sistema educatiu de la nostra escola podem destacar l'aplicació de l'Aprenentatge Basat en Projectes (PBL), aplicat inicialment als estudis de Segon Cicle. D'acord amb aquest model, els alumnes aprenen realitzant projectes en grup. Les intervencions del professorat i els materials del curs estan orientats a donar suport a les necessitats dels projectes que es desenvolupen a cada moment. Tot seguint la línia de treball de l'escola i la seva adequació als criteris determinats en el Espai Europeu d'Educació Superior, aquest projecte segueix tres línies d’actuació: (1) incideix en l'aplicació del PBL dintre d'assignatures Optatives i en assignatures de primers cursos de la Titulació d'Enginyeria de Telecomunicacions, (2) estimular l’alumnat, a través de treballs interdisciplinaris i la utilització de les noves tecnologies, (3) generació de documentació adaptada als nous plans d’estudi. Aquestes línies d’actuació es desenvolupen per motivar els alumnes en els estudis d'enginyeria que estan cursant i fer-los veure l'aplicabilitat, en el camp de la recerca, de gran quantitat dels coneixements que van adquirint durant la seva formació dintre de la Universitat.

La Sociedad Geográfica de Madrid y el colonialismo español en Marruecos (1876-1956)

L’objectiu central de l’article és analitzar l’actitud que es manifestà a la Sociedad Geogràfica de Madrid en relació amb l’acció colonial espanyola al Marroc, des del 1876 —any de creació de la Societat— fins al 1956 —independència del Marroc i consegüent finalització del protectorat espanyol—. Així mateix, s’examinen les actuacions que dugué a terme per impulsar l’esmentat procés, els mecanismes que utilitzà per influir en la política exterior i en la societat espanyoles i les repercussions de la seva activitat

Estudi i implantació de les millores en la productivitat d'una planta de mecanitzats d'alumini

El projecte ha estat realitzat a TECALUM SL, una empresa instal·lada al municipi de Tortellà (comarca de La Garrotxa) situat a uns 35 km de Girona. És una de les poques empreses de Catalunya que pertanyen al sector de la indústria metal·lúrgica, i de les úniques que es dediquen a l’extrusió i mecanitzat de l’alumini, així com al seu disseny i comercialització. El projecte se centra en l’anàlisi de la planta de mecanitzats d’alumini i la proposta de mesures correctives per millorar-ne la seva productivitat

In memoriam: Dr. Francesc Abel i Fabre, SJ.

The Journal of Medicine and Philosophy has been impoverished by the loss of Dr. Francesc Abel Fabre, S.J. (1933–2011), one of the founders of bioethics and a long-time member of the Editorial Advisory Board. 2011 brought the death of Dr. Francesc Abel Fabre, S.J., at the age of 78. He was the pioneer of European bioethics. Dr. Abel learned the discipline at Georgetown University, working side by side with the founder and first director of the Kennedy Institute of Ethics, André Hellegers, as bioethics itself was coming into existence. He went from this experience to establish the Institute Borja of Bioethics in Catalonia in 1976, the first center of bioethics in Spain and in Europe. Through his scholarship and teaching, he established an influential dialogue in bioethics, as well as ethics committees in hospitals and in research centers. In 1986 he joined in founding the European Association of Centres of Medical Ethics, an organization in which he was involved and participated for the last 25 years. He contributed crucially to bioethics across the world, especially through the International Study Group on Bioethics (1980–1994). He was widely recognized as an outstanding bioethics expert in Latin America.

Friction Stir Processing : a new microstructure improvement technique

In the present work, microstructure improvement using FSP (Friction Stir Processing) is studied. In the first part of the work, the microstructure improvement of as-cast A356 is demonstrated. Some tensile tests were applied to check the increase in ductility. However, the expected results couldn’t be achieved. In the second part, the microstructure improvement of a fusion weld in 1050 aluminium alloy is presented. Hardness tests were carried out to prove the mechanical propertyimprovements. In the third and last part, the microstructure improvement of 1050 aluminium alloy is achieved. A discussion of the mechanical property improvements induced by FSP is made. The influence of tool traverse speed on microstructure and mechanical properties is also discussed. Hardness tests and recrystallization theory enabled us to find out such influence

Determination of the direct band-gap energy of InAlAs matched to InP by photoluminescence excitation spectroscopy

A series of InxAl1-xAs samples (0.51≪x≪0.55)coherently grown on InP was studied in order to measure the band-gap energy of the lattice matched composition. As the substrate is opaque to the relevant photon energies, a method is developed to calculate the optical absorption coefficient from the photoluminescence excitation spectra. The effect of strain on the band-gap energy has been taken into account. For x=0.532, at 14 K we have obtained Eg0=1549±6 meV

Medicine and Science in a New Medical-surgical Context: The Royal College of Surgery of Barcelona (1760–1843)

Taking the Royal College of Barcelona (1760 -1843) as a case study this paper shows the development of modern surgery in Spain initiated by Bourbon Monarchy founding new kinds of institutions through their academic activities of spreading scientific knowledge. Antoni Gimbernat was the most famousinternationally recognised Spanish surgeon. He was trained as a surgeon at the Royal College of Surgery in Cadiz and was later appointed as professor of theAnatomy in the College of Barcelona. He then became Royal Surgeon of King Carlos IV and with that esteemed position in Madrid he worked resiliently to improve the quality of the Royal colleges in Spain. Learning human bodystructure by performing hands-on dissections in the anatomical theatre has become a fundamental element of modern medical education. Gimbernat favoured the study of natural sciences, the new chemistry of Lavoisier and experimental physics in the academic programs of surgery. According to the study of a very relevant set of documents preserved in the library, the so-called “juntas literarias”, among the main subjects debated in the clinical sessions was the concept of human beings and diseases in relation to the development of the new experimental sciences. These documents showed that chemistry andexperimental physics were considered crucial tools to understand the unexplained processes that occurred in the diseased and healthy human bodyand in a medico-surgical context. It is important to stress that through these manuscripts we can examine the role and the reception of the new sciences applied to healing arts.

Una mirada retrospectiva: de l'Escola Superior de Bibliotecàries a la Facultat de Biblioteconomia i Documentació (1915-2005)

November 2005 marked the 90th anniversary of the founding of the Escola Superior de Bibliotecàries [Superior School of Librarians] of the Mancomunitat de Catalunya, which was the predecessor of the current Facultat de Biblioteconomia i Documentació of the Universitat de Barcelona. This article offers text and images from an exhibit organised by the Facultat in order to commemorate this anniversary. A historic review is provided of different stages marking the evolution of the centre

Efficient energy transfer from Si clusters to Er3+ in complex silicate glasses

We present an extensive study of the structural and optical emission properties in aluminum silicates and soda-lime silicates codoped with Si nanoclusters (Si-nc) and Er. Si excess of 5 and 15¿at.¿% and Er concentrations ranging from 2×1019 up to 6×1020¿cm¿3 were introduced by ion implantation. Thermal treatments at different temperatures were carried out before and after Er implantation. Structural characterization of the resulting structures was performed to obtain the layer composition and the size distribution of Si clusters. A comprehensive study has been carried out of the light emission as a function of the matrix characteristics, Si and Er contents, excitation wavelength, and power. Er emission at 1540¿nm has been detected in all coimplanted glasses, with similar intensities. We estimated lifetimes ranging from 2.5¿to¿12¿ms (depending on the Er dose and Si excess) and an effective excitation cross section of about 1×10¿17¿cm2 at low fluxes that decreases at high pump power. By quantifying the amount of Er ions excited through Si-nc we find a fraction of 10% of the total Er concentration. Upconversion coefficients of about 3×10¿18¿cm¿3¿s¿1 have been found for soda-lime glasses and one order of magnitude lower in aluminum silicates.

Development of laser-fired contacts for amorphous silicon layers obtained by Hot-Wire CVD

In this work we study aluminium laser-fired contacts for intrinsic amorphous silicon layers deposited by Hot-Wire CVD. This structure could be used as an alternative low temperature back contact for rear passivated heterojunction solar cells. An infrared Nd:YAG laser (1064 nm) has been used to locally fire the aluminium through the thin amorphous silicon layers. Under optimized laser firing parameters, very low specific contact resistances (ρc ∼ 10 mΩ cm2) have been obtained on 2.8 Ω cm p-type c-Si wafers. This investigation focuses on maintaining the passivation quality of the interface without an excessive increase in the series resistance of the device.

Electronic structure and properties of AlN

The electronic structure of the wurtzite-type phase of aluminum nitride has been investigated by means of periodic ab initio Hartree-Fock calculations. The binding energy, lattice parameters (a,c), and the internal coordinate (u) have been calculated. All structural parameters are in excellent agreement with the experimental data. The electronic structure and bonding in AlN are analyzed by means of density-of-states projections and electron-density maps. The calculated values of the bulk modulus, its pressure derivative, the optical-phonon frequencies at the center of the Brillouin zone, and the full set of elastic constants are in good agreement with the experimental data.