Chemisorption of atomic aluminum on Si(111): Evidence for an adsorbate-induced relaxation based on ab initio cluster-model calculations

Interaction models of atomic Al with Si4H9, Si4H7, and Si6H9 clusters have been studied to simulate Al chemisorption on the Si(111) surface in the atop, fourfold atop, and open sites. Calculations were carried out using nonempirical pseudopotentials in the framework of the ab initio Hartree-Fock procedure. Equilibrium bond distances, binding energies for adsorption, and vibrational frequencies of the adatoms are calculated. Several basis sets were used in order to show the importance of polarization effects, especially in the binding energies. Final results show the importance of considering adatom-induced relaxation effects to specify the order of energy stabilities for the three different sites, the fourfold atop site being the preferred one, in agreement with experimental findings.

Comparative effects of macro-sized aluminum oxide and aluminum oxide nanoparticles on erythrocyte hemolysis: influence of cell source, temperature and size

Al2O3 is the most abundantly produced nanomaterial and has been used in diverse fields, including the medical, military and industrial sectors. As there are concerns about the health effects of nanoparticles, it is important to understand how they interact with cells, and specifically with red blood cells. The hemolysis induced by three commercial nano-sized aluminum oxide particles (nanopowder 13 nm, nanopowder <50 nm and nanowire 2-6 nm × 200-400 nm) was compared to aluminum oxide and has been studied on erythrocytes from humans, rats and rabbits, in order to elucidate the mechanism of action and the influence of size and shape on hemolytic behavior. The concentrations inducing 50% hemolysis (HC50) were calculated for each compound studied. The most hemolytic aluminum oxide particles were of nanopowder 13, followed by nanowire and nanopowder 50. The addition of albumin to PBS induced a protective effect on hemolysis in all the nano-forms of Al2O3, but not on Al2O3. The drop in HC50 correlated to a decrease in nanomaterial size, which was induced by a reduction of aggregation Aluminum oxide nanoparticles are less hemolytic than other oxide nanoparticles, and behave differently depending on the size and shape of the nanoparticles. The hemolytic behavior of aluminum oxide nanoparticles differs from that of aluminum oxide.

Comparative effects of macro-sized aluminum oxide and aluminum oxide nanoparticles on erythrocyte hemolysis: influence of cell source, temperature and size

Al2O3 is the most abundantly produced nanomaterial and has been used in diverse fields, including the medical, military and industrial sectors. As there are concerns about the health effects of nanoparticles, it is important to understand how they interact with cells, and specifically with red blood cells. The hemolysis induced by three commercial nano-sized aluminum oxide particles (nanopowder 13 nm, nanopowder <50 nm and nanowire 2-6 nm × 200-400 nm) was compared to aluminum oxide and has been studied on erythrocytes from humans, rats and rabbits, in order to elucidate the mechanism of action and the influence of size and shape on hemolytic behavior. The concentrations inducing 50% hemolysis (HC50) were calculated for each compound studied. The most hemolytic aluminum oxide particles were of nanopowder 13, followed by nanowire and nanopowder 50. The addition of albumin to PBS induced a protective effect on hemolysis in all the nano-forms of Al2O3, but not on Al2O3. The drop in HC50 correlated to a decrease in nanomaterial size, which was induced by a reduction of aggregation Aluminum oxide nanoparticles are less hemolytic than other oxide nanoparticles, and behave differently depending on the size and shape of the nanoparticles. The hemolytic behavior of aluminum oxide nanoparticles differs from that of aluminum oxide.

Muntatge i automatització d'un ascensor de 4 plantes

Treball de recerca realitzat per alumnes d'ensenyament secundari i guardonat amb un Premi CIRIT per fomentar l'esperit cientí­fic del Jovent l'any 2009. Les primera intenció d'aquesta recerca és unificar dues grans branques de la tecnologia com són la mecànica i l'elèctronica. Així va sorgir el projecte de construir un ascensor i provar un nou sistema de transmissió com és el vis sense fi juntament amb la introducció d'un microcontrolador del tipus PIC com a unitat central de processament. El primer pas d'aquest treball va ser el disseny d'aquest ascensor utilitzant diversos programes. Posteriorment es van encarregar aquestes peces abans dissenyades per tal de començar-ne la construcció. Aquestes peces van ser unides totalment mitjançant rebladures i altres suports mecànics. A continuació es va desenvolupar la programació del microcontrolador. El pas més important va ser l'acoblament del grup motor i el poliment dels aspectes més difícils de corregir com és el cas dels molts fregaments que patia al ser una estructura purament metàl·lica. Corregits aquests problemes i el nivell sonor, es va donar per conclòs el treball.

Impactes de l'ús dels iots al Port Esportiu d'Aiguadolç

L’ús d’embarcacions d’esbarjo és una activitat molt extesa a la zona costanera del Garraf. Aquesta activitat origina fluxos energètics i materials els quals, a la vegada, són els productors d’impactes sobre el medi natural i l’entorn portuari. En aquest article es realitza una avaluació d’aquests fluxos (energia, aigua i residus) al Port Esportiu d’Aiguadolç mitjançant indicadors escollits especialment per aquesta finalitat, els quals s’han utilitzat posteriorment per analitzar els impactes que es produeixen al port. D’aquesta manera, a partir dels resultats obtinguts s’han exposat diverses propostes de millora amb l’objectiu de disminuir els impactes generats de l’ús i gaudiment dels iots, emfatitzant especialment en els impactes generats quan aquests es troben amarrats al port. Tenint en compte que no existeixen estudis previs publicats sobre aquesta temàtica, aquest article deixa la porta oberta a l’hora de continuar estudiant la incidència sobre el medi que te l’ús d’embarcacions.

Industrial district effects and innovation in the Tuscan shipbuilding industry

The aim of the present work is to investigate innovative processes within a geographical cluster, and thus contribute to the debate on the effects of industrial clusters on innovation capacity. In particular, we would like to ascertain whether the advantages of industrial districts in promoting innovation, as already revealed by literature (diffusion of knowledge, social capital and trust, efficient networking), are also keys to success in the Tuscan shipbuilding industry of pleasure and sporting boats. First, we verify the existence of clusters of shipbuilding in Tuscany, using a specific methodology. Next, in the identified clusters, we analyse three innovative networks financed in a policy to support innovation, and examine whether the typical features of a cluster for promoting innovation are at work, using a questionnaire administered to 71 actors. Finally, we develop a performance analysis of the cluster firms and ascertain whether their different behaviours also lead to different performances. The analysis results show that our case records effects of industrial clustering on innovation capacity, such as the important role given to trust and social capital, the significant worth put in interfirm relations and in each partner’s specific competencies, or even the distinctive performance of firms belonging to a cluster.

Impacte ambiental dels iots en els ports de Sitges: anàlisi comparativa

Els ports esportius a nivell català han augmentat considerablement a causa de la creixent afició a la navegació i els esports nàutics. L’increment de la demanda d’amarratges al port i la conseqüent concentració d’iots, ha implicat la necessitat d’un estudi dels seus impactes potencials. El Port Garraf té un impacte més reduït degut a que prioritzen les embarcacions de vela, en canvi pel que fa al Port d’Aiguadolç i Port Ginesta la proporció d’embarcacions a motor és superior, per tant tindran un consum més elevat de combustible. Pel que fa a residus especials, concretament olis, els tres ports tenen un impacte sever per la difícil recuperació del medi en cas d’accident, encara que hi ha una bona gestió en els ports. Per acabar el Port d’Aiguadolç és el que té un consum d’aigua superior. Segons la comparació que s’ha realitzat dels diferents fluxos, es pot concloure que el port Ginesta és el més sostenible. Gràcies a la bona gestió portuària i a la sensibilització dels usuaris del port, tot i tenir major superfície i més quantitat d’embarcacions, aquest port és el que té menors impactes potencials.

Estudi i implantació de les millores en la productivitat d'una planta de mecanitzats d'alumini

El projecte ha estat realitzat a TECALUM SL, una empresa instal·lada al municipi de Tortellà (comarca de La Garrotxa) situat a uns 35 km de Girona. És una de les poques empreses de Catalunya que pertanyen al sector de la indústria metal·lúrgica, i de les úniques que es dediquen a l’extrusió i mecanitzat de l’alumini, així com al seu disseny i comercialització. El projecte se centra en l’anàlisi de la planta de mecanitzats d’alumini i la proposta de mesures correctives per millorar-ne la seva productivitat

SLAM using an Imaging Sonar for Partially Structured Underwater Environments

In this paper we describe a system for underwater navigation with AUVs in partially structured environments, such as dams, ports or marine platforms. An imaging sonar is used to obtain information about the location of planar structures present in such environments. This information is incorporated into a feature-based SLAM algorithm in a two step process: (I) the full 360deg sonar scan is undistorted (to compensate for vehicle motion), thresholded and segmented to determine which measurements correspond to planar environment features and which should be ignored; and (2) SLAM proceeds once the data association is obtained: both the vehicle motion and the measurements whose correct association has been previously determined are incorporated in the SLAM algorithm. This two step delayed SLAM process allows to robustly determine the feature and vehicle locations in the presence of large amounts of spurious or unrelated measurements that might correspond to boats, rocks, etc. Preliminary experiments show the viability of the proposed approach

Anàlisi cronològica de la pesca al Port de Llançà: període 1977-1996

A partir del buidatge exhaustiu dels fulls de subhasta del peix i de les fitxes tècniques de les embarcacions de la Confraria del Port de Llançà, es fa una anàlisi cronològica qualitativa i quantitativa dels darrers vint anys de pesca. La flota, inicialment constituïda per barques d'arrossegament i de pesca artesanal (palangre petit i tresmail), ha anat evolucionant, i ha quedat bàsicament constituïda actualment pel ròssec i el palangre de fons, que ha substituit progressivament la pesca artesanal. Les pesqueries, notablement multiespecífiques els primers anys, van donar pas, bàsicament amb la incorporació del radar, a una pesca molt més selectiva, dominada essencialment per la captura de lluç entre els anys 1980 i 1985. La progressiva incorporació del palangre de fons fa que a partir del 1986 es tendeixi novament cap a una captura més multiespecífica, perd amb canvis qualitatius importants en la composició d'espècies capturades en relació amb els primers anys

Friction Stir Processing : a new microstructure improvement technique

In the present work, microstructure improvement using FSP (Friction Stir Processing) is studied. In the first part of the work, the microstructure improvement of as-cast A356 is demonstrated. Some tensile tests were applied to check the increase in ductility. However, the expected results couldn’t be achieved. In the second part, the microstructure improvement of a fusion weld in 1050 aluminium alloy is presented. Hardness tests were carried out to prove the mechanical propertyimprovements. In the third and last part, the microstructure improvement of 1050 aluminium alloy is achieved. A discussion of the mechanical property improvements induced by FSP is made. The influence of tool traverse speed on microstructure and mechanical properties is also discussed. Hardness tests and recrystallization theory enabled us to find out such influence

Determination of the direct band-gap energy of InAlAs matched to InP by photoluminescence excitation spectroscopy

A series of InxAl1-xAs samples (0.51≪x≪0.55)coherently grown on InP was studied in order to measure the band-gap energy of the lattice matched composition. As the substrate is opaque to the relevant photon energies, a method is developed to calculate the optical absorption coefficient from the photoluminescence excitation spectra. The effect of strain on the band-gap energy has been taken into account. For x=0.532, at 14 K we have obtained Eg0=1549±6 meV

Impact of fisheries on activity, diet and predatory interactions between yellow-legged and Audouin's gulls breeding at the Chafarinas Is.

Interactions between yellow-legged Larus cachinnans and Audouin´s Larus audouinii gulls and fisheries operating around the Chafarinas Islands, located 4.5 km off the Moroccan Mediterranean coast, are reviewed. At the Chafarinas archipelago two distinct types of fisheries operate: trawlers and purse seines. Gulls take advantage of both fisheries. They scavenge trawler discards and congregate around shoals of fish attracted to the surface by the purse-seine lamps. When both trawlers and purse-seine boats are in operation, the diet of both gull species is similar, with epipelagic fish accounting for over 60% of the biomass, partially collected in association with the purse-seine fishery. When only trawlers operated yellow-legged gulls, but not Audouin´s gulls, augmented their diet mainly with human waste from refuse dumps, suggesting that competition for food between the two species is mainly limited to the periods when resources made available by fishery activities are abundant. Likewise, when only trawlers operated, there was an increase in the predation pressure on eggs and chicks of Audouin´s gulls. In particular, during the week of celebrations for the holy lamb festival when neither fishery operated, egg losses of Audouin´s gull increased dramatically, suggesting that severe food shortage caused by the cessation of fishing can result in an increased predation pressure by yellow-legged gulls, affecting Audouin´s gull productivity. These results suggest a novel socio-ecological link between gulls, fisheries and local feasts.

Efficient energy transfer from Si clusters to Er3+ in complex silicate glasses

We present an extensive study of the structural and optical emission properties in aluminum silicates and soda-lime silicates codoped with Si nanoclusters (Si-nc) and Er. Si excess of 5 and 15¿at.¿% and Er concentrations ranging from 2×1019 up to 6×1020¿cm¿3 were introduced by ion implantation. Thermal treatments at different temperatures were carried out before and after Er implantation. Structural characterization of the resulting structures was performed to obtain the layer composition and the size distribution of Si clusters. A comprehensive study has been carried out of the light emission as a function of the matrix characteristics, Si and Er contents, excitation wavelength, and power. Er emission at 1540¿nm has been detected in all coimplanted glasses, with similar intensities. We estimated lifetimes ranging from 2.5¿to¿12¿ms (depending on the Er dose and Si excess) and an effective excitation cross section of about 1×10¿17¿cm2 at low fluxes that decreases at high pump power. By quantifying the amount of Er ions excited through Si-nc we find a fraction of 10% of the total Er concentration. Upconversion coefficients of about 3×10¿18¿cm¿3¿s¿1 have been found for soda-lime glasses and one order of magnitude lower in aluminum silicates.

Development of laser-fired contacts for amorphous silicon layers obtained by Hot-Wire CVD

In this work we study aluminium laser-fired contacts for intrinsic amorphous silicon layers deposited by Hot-Wire CVD. This structure could be used as an alternative low temperature back contact for rear passivated heterojunction solar cells. An infrared Nd:YAG laser (1064 nm) has been used to locally fire the aluminium through the thin amorphous silicon layers. Under optimized laser firing parameters, very low specific contact resistances (ρc ∼ 10 mΩ cm2) have been obtained on 2.8 Ω cm p-type c-Si wafers. This investigation focuses on maintaining the passivation quality of the interface without an excessive increase in the series resistance of the device.