A nonparametric method for the measurement of size diversity with emphasis on data standardization

The most suitable method for estimation of size diversity is investigated. Size diversity is computed on the basis of the Shannon diversity expression adapted for continuous variables, such as size. It takes the form of an integral involving the probability density function (pdf) of the size of the individuals. Different approaches for the estimation of pdf are compared: parametric methods, assuming that data come from a determinate family of pdfs, and nonparametric methods, where pdf is estimated using some kind of local evaluation. Exponential, generalized Pareto, normal, and log-normal distributions have been used to generate simulated samples using estimated parameters from real samples. Nonparametric methods include discrete computation of data histograms based on size intervals and continuous kernel estimation of pdf. Kernel approach gives accurate estimation of size diversity, whilst parametric methods are only useful when the reference distribution have similar shape to the real one. Special attention is given for data standardization. The division of data by the sample geometric mean is proposedas the most suitable standardization method, which shows additional advantages: the same size diversity value is obtained when using original size or log-transformed data, and size measurements with different dimensionality (longitudes, areas, volumes or biomasses) may be immediately compared with the simple addition of ln k where kis the dimensionality (1, 2, or 3, respectively). Thus, the kernel estimation, after data standardization by division of sample geometric mean, arises as the most reliable and generalizable method of size diversity evaluation

Unsupervised active regions for multiresolution image segmentation

An unsupervised approach to image segmentation which fuses region and boundary information is presented. The proposed approach takes advantage of the combined use of 3 different strategies: the guidance of seed placement, the control of decision criterion, and the boundary refinement. The new algorithm uses the boundary information to initialize a set of active regions which compete for the pixels in order to segment the whole image. The method is implemented on a multiresolution representation which ensures noise robustness as well as computation efficiency. The accuracy of the segmentation results has been proven through an objective comparative evaluation of the method

Framework for Traffic Pattern Identification: Required Step for Short-term Forecasting

In the world of transport management, the term ‘anticipation’ is gradually replacing ‘reaction’. Indeed, the ability to forecast traffic evolution in a network should ideally form the basis for many traffic management strategies and multiple ITS applications. Real-time prediction capabilities are therefore becoming a concrete need for the management of networks, both for urban and interurban environments, and today’s road operator has increasingly complex and exacting requirements. Recognising temporal patterns in traffic or the manner in which sequential traffic events evolve over time have been important considerations in short-term traffic forecasting. However, little work has been conducted in the area of identifying or associating traffic pattern occurrence with prevailing traffic conditions. This paper presents a framework for detection pattern identification based on finite mixture models using the EM algorithm for parameter estimation. The computation results have been conducted taking into account the traffic data available in an urban network.

Enjoying cooperative games: The R package GameTheory

This paper focuses on cooperative games with transferable utility. We propose the computation of two solutions, the Shapley value for n agents and the nucleolus with a maximum of four agents. The current approach is also focused on conflicting claims problems, a particular case of coalitional games. We provide the computation of the most well-known and used claims solutions: the proportional, the constrained equal awards, the constrained equal losses, the Talmud and the random arrival rules. Keywords: Cooperative game, Shapley value, nucleolus, claims problem, claims rule, bankruptcy.

Toward 'Complexics' as a transdiscipline

The proposed transdisciplinary field of ‘complexics’ would bring together allcontemporary efforts in any specific disciplines or by any researchersspecifically devoted to constructing tools, procedures, models and conceptsintended for transversal application that are aimed at understanding andexplaining the most interwoven and dynamic phenomena of reality. Our aimneeds to be, as Morin says, not “to reduce complexity to simplicity, [but] totranslate complexity into theory”.New tools for the conception, apprehension and treatment of the data ofexperience will need to be devised to complement existing ones and toenable us to make headway toward practices that better fit complexictheories. New mathematical and computational contributions have alreadycontinued to grow in number, thanks primarily to scholars in statisticalphysics and computer science, who are now taking an interest in social andeconomic phenomena.Certainly, these methodological innovations put into question and againmake us take note of the excessive separation between the training receivedby researchers in the ‘sciences’ and in the ‘arts’. Closer collaborationbetween these two subsets would, in all likelihood, be much moreenergising and creative than their current mutual distance. Humancomplexics must be seen as multi-methodological, insofar as necessarycombining quantitative-computation methodologies and more qualitativemethodologies aimed at understanding the mental and emotional world ofpeople.In the final analysis, however, models always have a narrative runningbehind them that reflects the attempts of a human being to understand theworld, and models are always interpreted on that basis.

Toward 'Complexics' as a transdiscipline

The proposed transdisciplinary field of ‘complexics’ would bring together allcontemporary efforts in any specific disciplines or by any researchersspecifically devoted to constructing tools, procedures, models and conceptsintended for transversal application that are aimed at understanding andexplaining the most interwoven and dynamic phenomena of reality. Our aimneeds to be, as Morin says, not “to reduce complexity to simplicity, [but] totranslate complexity into theory”.New tools for the conception, apprehension and treatment of the data ofexperience will need to be devised to complement existing ones and toenable us to make headway toward practices that better fit complexictheories. New mathematical and computational contributions have alreadycontinued to grow in number, thanks primarily to scholars in statisticalphysics and computer science, who are now taking an interest in social andeconomic phenomena.Certainly, these methodological innovations put into question and againmake us take note of the excessive separation between the training receivedby researchers in the ‘sciences’ and in the ‘arts’. Closer collaborationbetween these two subsets would, in all likelihood, be much moreenergising and creative than their current mutual distance. Humancomplexics must be seen as multi-methodological, insofar as necessarycombining quantitative-computation methodologies and more qualitativemethodologies aimed at understanding the mental and emotional world ofpeople.In the final analysis, however, models always have a narrative runningbehind them that reflects the attempts of a human being to understand theworld, and models are always interpreted on that basis.

Another Look at the Null of Stationary Real Exchange Rates: Panel Data with Structural Breaks and Cross-section Dependence

This paper re-examines the null of stationary of real exchange rate for a panel of seventeen OECD developed countries during the post-Bretton Woods era. Our analysis simultaneously considers both the presence of cross-section dependence and multiple structural breaks that have not received much attention in previous panel methods of long-run PPP. Empirical results indicate that there is little evidence in favor of PPP hypothesis when the analysis does not account for structural breaks. This conclusion is reversed when structural breaks are considered in computation of the panel statistics. We also compute point estimates of half-life separately for idiosyncratic and common factor components and find that it is always below one year.

Swarm Intelligent Selection and Optimization of Machining System Parameters for Microchannel Fabrication in Medical Devices

Current technology trends in medical device industry calls for fabrication of massive arrays of microfeatures such as microchannels on to nonsilicon material substrates with high accuracy, superior precision, and high throughput. Microchannels are typical features used in medical devices for medication dosing into the human body, analyzing DNA arrays or cell cultures. In this study, the capabilities of machining systems for micro-end milling have been evaluated by conducting experiments, regression modeling, and response surface methodology. In machining experiments by using micromilling, arrays of microchannels are fabricated on aluminium and titanium plates, and the feature size and accuracy (width and depth) and surface roughness are measured. Multicriteria decision making for material and process parameters selection for desired accuracy is investigated by using particle swarm optimization (PSO) method, which is an evolutionary computation method inspired by genetic algorithms (GA). Appropriate regression models are utilized within the PSO and optimum selection of micromilling parameters; microchannel feature accuracy and surface roughness are performed. An analysis for optimal micromachining parameters in decision variable space is also conducted. This study demonstrates the advantages of evolutionary computing algorithms in micromilling decision making and process optimization investigations and can be expanded to other applications

Ionospheric tomography using GNSS reflections

In this paper, we report a preliminary analysis of the impact of Global Navigation Satellite System Reflections (GNSS-R) data on ionospheric monitoring over the oceans. The focus will be on a single polar Low Earth Orbiter (LEO) mission exploiting GNSS-R as well as Navigation (GNSS-N) and Occultation (GNSS-O) total electron content (TEC) measurements. In order to assess impact of the data, we have simulated GNSS-R/O/N TEC data as would be measured from the LEO and from International Geodesic Service (IGS) ground stations, with an electron density (ED) field generated using a climatic ionospheric model. We have also developed a new tomographic approach inspired by the physics of the hydrogen atom and used it to effectively retrieve the ED field from the simulated TEC data near the orbital plane. The tomographic inversion results demonstrate the significant impact of GNSS-R: three-dimensional ionospheric ED fields are retrieved over the oceans quite accurately, even as, in the spirit of this initial study, the simulation and inversion approaches avoided intensive computation and sophisticated algorithmic elements (such as spatio-temporal smoothing). We conclude that GNSS-R data over the oceans can contribute significantly to a Global/GNSS Ionospheric Observation System (GIOS). Index Terms Global Navigation Satellite System (GNSS), Global Navigation Satellite System Reflections (GNSS-R), ionosphere, Low Earth Orbiter (LEO), tomography.

Análisis composicional de datos en Ciencias Geoambientales

Compositional data (concentrations) are common in geosciences. Neglecting its character mey lead to erroneous conclusions. Spurious correlation (K. Pearson, 1897) has disastrous consequences. On the basis of the pioneering work by J. Aitchison in the 1980s, a methodology free of these drawbacks is now available. The geometry of the símplex allows the representation of compositions using orthogonal co-ordinares, to which usual statistical methods can be applied, thus facilating computation ans analysis. The use of (log) ratios precludes the interpretation of single concentrations disregarding their relative character. A hydro-chemical data set is used to illustrate the point

Indirect likelihood inference (revised)

Standard indirect Inference (II) estimators take a given finite-dimensional statistic, Z_{n} , and then estimate the parameters by matching the sample statistic with the model-implied population moment. We here propose a novel estimation method that utilizes all available information contained in the distribution of Z_{n} , not just its first moment. This is done by computing the likelihood of Z_{n}, and then estimating the parameters by either maximizing the likelihood or computing the posterior mean for a given prior of the parameters. These are referred to as the maximum indirect likelihood (MIL) and Bayesian Indirect Likelihood (BIL) estimators, respectively. We show that the IL estimators are first-order equivalent to the corresponding moment-based II estimator that employs the optimal weighting matrix. However, due to higher-order features of Z_{n} , the IL estimators are higher order efficient relative to the standard II estimator. The likelihood of Z_{n} will in general be unknown and so simulated versions of IL estimators are developed. Monte Carlo results for a structural auction model and a DSGE model show that the proposed estimators indeed have attractive finite sample properties.