Inverted ductal papilloma of the oral cavity secondary to lower lip trauma. A case report and literature review

Inverted ductal papilloma of the oral cavity is an infrequent benign neoplasm of papillary appearance that originates in the secretory duct of a salivary gland. The etiology is unknown, though some authors have related it to human papillomavirus (HPV) infection. We present the case of a 40-year-old woman with a tumor of the lower lip mucosa. Histopathological study of the lesion diagnosed inverted ductal papilloma of the oral cavity. Human papillomavirus DNA detection and typing based on tumor lesion DNA amplification and posterior hybridization, revealed no presence of viral DNA. The antecedents of trauma reported by the patient could have played an important role in the development of this tumor

Author Rights vs Self-Archiving in Spanish Scientific Journals

The paper analyzes publishers" copyright policies and self-archiving conditions of Spanish scientific journals. Data are extracted from the directory DULCINEA that contains information of 1318 Spanish journals, of which 775 (61%) allow some form of self-archiving to be about 60% of the post-print version and allowing them 87% of the deposit of the version of record. In 72% of journals the deposit can be performed immediately after publication and in 16% after article acceptance. 72% of the journals are freely available without charge to the user this figure raises up to 86% if free access after an embargo is considered. Only 18% of the journals use Creative Commons licenses. The adoption of different open access journals model in Spain is favorable, however there is still a high percentage of journals (39%) that do not provide any information about authors and publishers rights and that difficult or inhibits reuse of published articles.

Gestión de la actividad no presencial y autoevaluación de competencias = Management of Student Learning Outside the Classroom and the Self-evaluation of Competences

Psychological Assessment is a core subject of Psychology studies, and of the university degree Human development, at the University of Girona and according to the University regulations, had 12 credits. Until the 2005-06 academic years, the student work conducted outside the classroom consisted of undertaking a psychological assessment that was written and handed in at the end of the course. From this the student obtained a qualification and a review if they applied for it In accordance with the European Credits for Higher Education, this subject was reduced to 9 credits, which is the equivalent of a total of 255 hours of in-class work and outside the classroom. In the 2006-07 academic year we created a guide to manage the student’s experiences outside the classroom, with the objective of encouraging the application of problem solving/critical thinking (Bloom, 1975), in line with the recommendations of the Catalonia Agency for University System Quality (2005). The guide includes: learning objectives, evaluation criterions, a description of activities, work week timetable for the whole course, programmed tutorials to review all steps of the psychological assessment process, and the use of a web-based virtual forum for the transfer of knowledge, analysis and constructive critiques of the assessment done by themselves and their colleagues

Análisis del error de medición y variabilidad interespecífica morfométrica de Fourier en M2 de primates Hominoidea

Los análisis de Fourier permiten caracterizar el contorno del diente y obtener una serie de parámetros para un posterior análisis multivariante. Sin embargo, la gran complejidad que presentan algunas formas obliga a determinar el error de medición intrínseco que se produce. El objetivo de este trabajo es aplicar y validar los análisis de Fourier en el estudio de la forma dental del segundo molar inferior (M2) de cuatro especies de primates Hominoidea para explorar la variabilidad morfométrica interespecífica, así como determinar el error de medición a un nivel intra e interobservador. El contorno de la superficie oclusal del diente fue definido digitalmente y con las funciones derivadas del análisis de Fourier se realizaron Análisis Discriminantes y Test de Mantel (correlaciones de Pearson) para determinar las diferencias de forma a partir de las mediciones tomadas. Los resultados indican que el análisis de Fourier muestra la variabilidad de forma en dientes molares en especies de primates Hominoidea. Adicionalmente, los altos niveles de correlación a nivel intra (r>0,9) como interobservador (r>0,7) sugieren que la descripción morfométrica del diente a partir de métodos de Fourier realizados por diferentes observadores puede ser agrupada para posteriores análisis.

Caracterización morfológica del M2 de Primates Hominoidea a partir de análisis de Fourier

Los análisis de Fourier permiten caracterizar el contorno del diente a partir de un número determinado de puntos y extraer una serie de parámetros para un posterior análisis multivariante. No obstante, la gran complejidad que presentan algunas conformaciones, obliga a comprobar cuántos puntos son necesarios para una correcta representación de ésta. El objetivo de este trabajo es aplicar y validar los análisis de Fourier (Polar y Elíptico) en el estudio de la forma dental a partir de diferentes puntos de contorno y explorar la variabilidad morfométrica en diferentes géneros. Se obtuvieron fotografías digitales de la superfi cie oclusal en segundos molares inferiores (M2s) de 4 especies de Primates (Hylobates moloch, Gorilla beringei graueri, Pongo pygmaeus pygmaeus y Pan troglodytes schweirfurthii) y se defi nió su contorno con 30, 40, 60, 80, 100 y 120 puntos y su representación formal a 10 armónicos. El análisis de la variabilidad morfométrica se realizó mediante la aplicación de Análisis Discriminantes y un NP-MANOVA a partir de matrices de distancias para determinar la variabilidad y porcentajes de clasifi cacióncorrecta, a nivel metodológico y taxonómico. Los resultados indicaron que los análisis de forma con series de Fourier permiten analizar la variabilidad morfométrica de M2s en géneros de Hominoidea, con independencia del número de puntos de contorno (30 a 120). Los porcentajes de clasifi cación son más variables e inferiores con el uso de la serie Polar (≈60-90) que con la Elíptica (75-100%). Un número entre 60-100 puntos de contorno mediante el método elíptico garantiza una descripción correcta de la forma del diente.

Bio-inspired Mechanisms for Artificial Self-organised Systems

Self-organization is a growing interdisciplinary field of research about a phenomenon that can be observed in the Universe, in Nature and in social contexts. Research on self-organization tries to describe and explain forms, complex patterns and behaviours that arise from a collection of entities without an external organizer. As researchers in artificial systems, our aim is not to mimic self-organizing phenomena arising in Nature, but to understand and to control underlying mechanisms allowing desired emergence of forms, complex patterns and behaviours. Rather than attempting to eliminate such self-organization in artificial systems, we think that this might be deliberately harnessed in order to reach desirable global properties. In this paper we analyze three forms of self-organization: stigmergy, reinforcement mechanisms and cooperation. The amplification phenomena founded in stigmergic process or in reinforcement process are different forms of positive feedbacks that play a major role in building group activity or social organization. Cooperation is a functional form for self-organization because of its ability to guide local behaviours in order to obtain a relevant collective one. For each forms of self-organisation, we present a case study to show how we transposed it to some artificial systems and then analyse the strengths and weaknesses of such an approach

Stable sampling and Fourier multipliers

We study the relationship between stable sampling sequences for bandlimited functions in $L^p(\R^n)$ and the Fourier multipliers in $L^p$. In the case that the sequence is a lattice and the spectrum is a fundamental domain for the lattice the connection is complete. In the case of irregular sequences there is still a partial relationship.

Metacognitive presence in asynchronous online learning environments : self, mutual and hetero-regulation

Peer-reviewed

Is Self-employment a Way to Escape from Skill Mismatches?

During the last two decades, skill mismatches have become one of the most important issues of policy concern in the EU (European Commission, 2008). Hence, the literature has stressed the necessity to reduce skill mismatches. We contribute to this literature by analyzing the impact of the transition from salaried employment to self-employment on self-reported skill mismatches. To do so, we resort to the European Community Household Panel (ECHP) covering the period 1994–2001. Using panel data, we track individuals over time and measure their self-reported skill mismatch before and after the transition. Our empirical findings indicate not only that the average self-employee is less likely to declare being skill-mismatched but also that those individuals who transit from salaried employment to self-employment reduce their probability of skill mismatches after the transition. Keywords: Self-employment, skill mismatches, salaried employment. JEL Classification: L26, J24, B23 __________________________

When culture does (not) matter: role models and self-efficacy as drivers of entrepreneurial behavior

The correlation between facets of national culture and startup activities has received confirmation in empirical research while many mechanisms behind the correlation remain unclear. We study the interplay between the individualism-collectivism orientation of national culture, the incidence of entrepreneurial role models and selfefficacy understood as the perception of possessing relevant skills and knowledge to become a successful entrepreneur. We find that exposure to entrepreneurial role models offsets self-efficacy as a driver of entrepreneurial intentions. The effect is magnified by the individualistic character of the national culture. Key words: entrepreneurial intentions, role models, self-efficacy, individualism, multilevel regressions

Tailored Jeffamine molecular tools for ordering mesoporous Silica

Herein, we report the formation of organized mesoporous silica materials prepared from a novel nonionic gemini surfactant, myristoyl-end capped Jeffamine, synthesized from a polyoxyalkyleneamine (ED900). The behavior of the modified Jeffamine in water was first investigated. A direct micellar phase (L1) and a hexagonal (H1) liquid crystal were found. The structure of the micelles was investigated from the SAXS and the analysis by Generalized Indirect Fourier Transformation (GIFT), which show that the particles are globular of coreshell type. The myristoyl chains, located at the ends of the amphiphile molecule are assembled to form the core of the micelles and, as a consequence, the molecules are folded over on themselves. Mesoporous materials were then synthesized from the self-assembly mechanism. The recovered materials were characterized by SAXS measurements, nitrogen adsorptiondesorption analysis, transmission and scanning electron microscopy. The results clearly evidence that by modifying the synthesis parameters, such as the surfactant/silica precursor molar ratio and the hydrothermal conditions, one can control the size and the nanostructuring of the resulting material. It was observed that, the lower the temperature of the hydrothermal treatment, the better the mesopore ordering.

Transcending the self in immersive virtual reality

Cognitive neuroscientists have discovered various experimental setups that suggest that our body representation is surprisingly flexible, where the brain can easily be tricked into the illusion that a rubber hand is your hand or that a manikin body is your body. These multisensory illusions work well in immersive virtual reality (IVR). What is even more surprising is that such embodiment induces perceptual, attitudinal and behavioural changes that are concomitant with the displayed body type. Here we outline some recent findings in this field, and suggest that this offers a powerful tool for neuroscience, psychology and a new path for IVR.

Validated spectrofluorometric method for determination of gemfibrozil in self nanoemulsifying drug delivery systems (SNEDDS)

A spectrofluorometric method has been developed and validated for the determination of gemfibrozil. The method is based on the excitation and emission capacities of gemfibrozil with excitation and emission wavelengths of 276 and 304 nm respectively. This method allows de determination of the drug in a self-nanoemulsifying drug delivery system (SNEDDS) for improve its intestinal absorption. Results obtained showed linear relationships with good correlation coefficients (r(2)>0.999) and low limits of detection and quantification (LOD of 0.075 μg mL(-1) and LOQ of 0.226 μg mL(-1)) in the range of 0.2-5 μg mL(-1), equally this method showed a good robustness and stability. Thus the amounts of gemfibrozil released from SNEDDS contained in gastro resistant hard gelatine capsules were analysed, and release studies could be performed satisfactorily.

Anisotropic surface properties of micro/nanostructured a-C:H:F thin films with self-assembly applications

The singular properties of hydrogenated amorphous carbon (a-C:H) thin filmsdeposited by pulsed DC plasma enhanced chemical vapor deposition (PECVD), such as hardness and wear resistance, make it suitable as protective coating with low surface energy for self-assembly applications. In this paper, we designed fluorine-containing a-C:H (a-C:H:F) nanostructured surfaces and we characterized them for self-assembly applications. Sub-micron patterns were generated on silicon through laser lithography while contact angle measurements, nanotribometer, atomic force microscopy (AFM), and scanning electron microscopy (SEM) were used to characterize the surface. a-C:H:F properties on lithographied surfaces such as hydrophobicity and friction were improved with the proper relative quantity of CH4 and CHF3 during deposition, resulting in ultrahydrophobic samples and low friction coefficients. Furthermore, these properties were enhanced along the direction of the lithographypatterns (in-plane anisotropy). Finally, self-assembly properties were tested with silicananoparticles, which were successfully assembled in linear arrays following the generated patterns. Among the main applications, these surfaces could be suitable as particle filter selector and cell colony substrate.