Preisach modeling of hysteresis for a pseudoelastic Cu-Zn-Al single crystal

Stress-strain trajectories associated with pseudoelastic behavior of a Cu¿19.4 Zn¿13.1 Al (at.%) single crystal at room temperature have been determined experimentally. For a constant cross-head speed the trajectories and the associated hysteresis behavior are perfectly reproducible; the trajectories exhibit memory properties, dependent only on the values of return points, where transformation direction is reverted. An adapted version of the Preisach model for hysteresis has been implemented to predict the observed trajectories, using a set of experimental first¿order reversal curves as input data. Explicit formulas have been derived giving all trajectories in terms of this data set, with no adjustable parameters. Comparison between experimental and calculated trajectories shows a much better agreement for descending than for ascending paths, an indication of a dissymmetry between the dissipation mechanisms operative in forward and reverse directions of martensitic transformation.

Impact of community structure on information transfer

The observation that real complex networks have internal structure has important implication for dynamic processes occurring on such topologies. Here we investigate the impact of community structure on a model of information transfer able to deal with both search and congestion simultaneously. We show that networks with fuzzy community structure are more efficient in terms of packet delivery than those with pronounced community structure. We also propose an alternative packet routing algorithm which takes advantage of the knowledge of communities to improve information transfer and show that in the context of the model an intermediate level of community structure is optimal. Finally, we show that in a hierarchical network setting, providing knowledge of communities at the level of highest modularity will improve network capacity by the largest amount.

Mineralization of the recalcitrant oxalic and oxamic acids by electrochemical advanced oxidation processes using a boron-doped diamond anode

Oxalic and oxamic acids are the ultimate and more persistent by-products of the degradation of N-aromatics by electrochemical advanced oxidation processes (EAOPs). In this paper, the kinetics and oxidative paths of these acids have been studied for several EAOPs using a boron-doped diamond (BDD) anode and a stainless steel or an air-diffusion cathode. Anodic oxidation (AO-BDD) in the presence of Fe2+ (AO-BDD-Fe2+) and under UVA irradiation (AO-BDD-Fe2+-UVA), along with electro-Fenton (EF-BDD), was tested. The oxidation of both acids and their iron complexes on BDD was clarified by cyclic voltammetry. AO-BDD allowed the overall mineralization of oxalic acid, but oxamic acid was removed much more slowly. Each acid underwent a similar decay in AO-BDD-Fe2+ and EFBDD, as expected if its iron complexes were not attacked by hydroxyl radicals in the bulk. The faster and total mineralization of both acids was achieved in AO-BDD-Fe2+-UVA due to the high photoactivity of their Fe(III) complexes that were continuously regenerated by oxidation of their Fe(II) complexes. Oxamic acid always released a larger proportion of NH4 + than NO3- ion, as well as volatile NOx species. Both acids were independently oxidized at the anode in AO-BDD, but in AO-BDD-Fe2+-UVA oxamic acid was more slowlydegraded as its content decreased, without significant effect on oxalic acid decay. The increase in current density enhanced the oxidation power of the latter method, with loss of efficiency. High Fe2+ contents inhibited the oxidation of Fe(II) complexes by the competitive oxidation of Fe2+ to Fe3+. Low current densities and Fe2+ contents are preferable to remove more efficiently these acids by the most potent AO-BDD-Fe2+-UVA method.

Assessing the pH and DP of canvasses with NIR spectroscopy

The canvas support in easel paintings is composed mainly of cellulose. One of the maindegradation paths of cellulose is acid-catalysed hydrolysis, which means that in an acidic environment (low pH), its degradation proceeds at a faster rate (Strlič et al., 2005).The main effect of acid-catalysed hydrolysis is the breaking up of the polymer chains,measured by the “Degree of Polymerisation” (DP). The lowering of the DP value impliesa lower mechanical strength of the textile (Scicolone, 1993), and thus this parameter canbe used to monitor degradation. Knowing these two parameters can, therefore, be veryinformative regarding the condition of the canvas support.

Using spatially distributed parameters and multi-response objective functions to solve parameterization of complex applications of semi-distributed hydrological models

Application of semi-distributed hydrological models to large, heterogeneous watersheds deals with several problems. On one hand, the spatial and temporal variability in catchment features should be adequately represented in the model parameterization, while maintaining the model complexity in an acceptable level to take advantage of state-of-the-art calibration techniques. On the other hand, model complexity enhances uncertainty in adjusted model parameter values, therefore increasing uncertainty in the water routing across the watershed. This is critical for water quality applications, where not only streamflow, but also a reliable estimation of the surface versus subsurface contributions to the runoff is needed. In this study, we show how a regularized inversion procedure combined with a multiobjective function calibration strategy successfully solves the parameterization of a complex application of a water quality-oriented hydrological model. The final value of several optimized parameters showed significant and consistentdifferences across geological and landscape features. Although the number of optimized parameters was significantly increased by the spatial and temporal discretization of adjustable parameters, the uncertainty in water routing results remained at reasonable values. In addition, a stepwise numerical analysis showed that the effects on calibration performance due to inclusion of different data types in the objective function could be inextricably linked. Thus caution should be taken when adding or removing data from an aggregated objective function.

Reconstructing snow avalanches in the Southeastern Pyrenees

A regional study of snow avalanche processes was undertaken in the SE Pyrenees. Dendrogeomorphology was used to date and reconstruct large-scale snow avalanche events that occurred in the last four decades. Dendrochronological analyses yielded the dates of nine winters when avalanches occurred in the recent past in six studied avalanche paths. Some of these avalanches were already known, but others had not been documented. In one case, the existing avalanche path map was improved with the dendrogeomorphological information of a larger past event. As a result of the dendrogeomorphological analyses, evidence for three regional-scale major avalanche years was identified in the SE Pyrenees from 1971 to 2004: 1971¿1972, 1995¿1996 and 2002¿2003. The specific synoptic atmospheric situations and the most likely nivometeorological and snowpack conditions that released these major avalanches were determined using weather data for the seasons of major avalanche releases. In 1971¿1972 the snow avalanche episode was characterized by a deep trough crossing the Pyrenees. In 1995¿1996 a variety of meteorological situations produced several episodes of major avalanches. In 2002¿2003 the more significant of two episodes was attributed to a north advection pumping an arctic air mass over the Pyrenees. The 1995¿1996 avalanche season proved to be the most notable in the four past decades in the Pyrenees.

Seismic detection and characterization of landslides and other mass movements

Seismic methods used in the study of snow avalanches may be employed to detect and characterize landslides and other mass movements, using standard spectrogram/sonogram analysis. For snow avalanches, the spectrogram for a station that is approached by a sliding mass exhibits a triangular time/frequency signature due to an increase over time in the higher-frequency constituents. Recognition of this characteristic footprint in a spectrogram suggests a useful metric for identifying other mass-movement events such as landslides. The 1 June 2005 slide at Laguna Beach, California is examined using data obtained from the Caltech/USGS Regional Seismic Network. This event exhibits the same general spectrogram features observed in studies of Alpine snow avalanches. We propose that these features are due to the systematic relative increase in high-frequency energy transmitted to a seismometer in the path of a mass slide owing to a reduction of distance from the source signal. This phenomenon is related to the path of the waves whose high frequencies are less attenuated as they traverse shorter source-receiver paths. Entrainment of material in the course of the slide may also contribute to the triangular time/frequency signature as a consequence of the increase in the energy involved in the process; in this case the contribution would be a source effect. By applying this commonly observed characteristic to routine monitoring algorithms, along with custom adjustments for local site effects, we seek to contribute to the improvement in automatic detection and monitoring methods of landslides and other mass movements.

Assessing the pH and DP of canvasses with NIR spectroscopy

The canvas support in easel paintings is composed mainly of cellulose. One of the maindegradation paths of cellulose is acid-catalysed hydrolysis, which means that in an acidic environment (low pH), its degradation proceeds at a faster rate (Strlič et al., 2005).The main effect of acid-catalysed hydrolysis is the breaking up of the polymer chains,measured by the “Degree of Polymerisation” (DP). The lowering of the DP value impliesa lower mechanical strength of the textile (Scicolone, 1993), and thus this parameter canbe used to monitor degradation. Knowing these two parameters can, therefore, be veryinformative regarding the condition of the canvas support.

Percepciones de estudiantes sobre el Aprendizaje móvil; la nueva generación de la educación a distancia

Durante años, muchas instituciones y universidades han comenzado a experimentar con los dispositivos móviles en el aprendizaje a través de diferentes proyectos como parte de su metodología de aprendizaje. La experiencia adquirida con el empleo de estrategias y enfoques en la educación a distancia puede facilitar la conceptualización del aprendizaje móvil, así como el desarrollo de aplicaciones para este nuevo medio de aprendizaje. Los dispositivos móviles abren además nuevos caminos para el aprendizaje y una nueva generación para la educación a distancia, y los investigadores conocen estos nuevos caminos para el aprendizaje y oportunidades de llegar a un público más amplio. Este trabajo, muestra los resultados de un grupo de discusión que se llevó a cabo entre 20 estudiantes de licenciatura con el fin de explorar las percepciones, y en general todo aquello que afecta a la interpretación subjetiva de los individuos y su interacción con un fenómeno social como el aprendizaje móvil.

Extending Learning Objects by Means of Social Networking

Learning objects have been the promise of providing people with high quality learning resources. Initiatives such as MIT Open-CourseWare, MERLOT and others have shown the real possibilities of creating and sharing knowledge through Internet. Thousands of educational resources are available through learning object repositories. We indeed live in an age of content abundance, and content can be considered as infrastructure for building adaptive and personalized learning paths, promoting both formal and informal learning. Nevertheless, although most educational institutions are adopting a more open approach, publishing huge amounts of educational resources, the reality is that these resources are barely used in other educational contexts. This paradox can be partly explained by the dificulties in adapting such resources with respect to language, e-learning standards and specifications and, finally, granularity. Furthermore, if we want our learners to use and take advantage of learning object repositories, we need to provide them with additional services than just browsing and searching for resources. Social networks can be a first step towards creating an open social community of learning around a topic or a subject. In this paper we discuss and analyze the process of using a learning object repository and building a social network on the top of it, with respect to the information architecture needed to capture and store the interaction between learners and resources in form of learning object metadata.

Gestió dels recursos docents en el marc de l'EEES

L'Espai Europeu d'Educació Superior comporta un canvi de paradigma molt important, com ésl'adopció d'un procés d'aprenentatge basat en l'adquisició i desenvolupament de competències mitjançant activitats, relegant els continguts a un segon terme. El propi concepte d'activitat inclou i combina elements molt diversos que involucren recursos docents de tota mena, tot abastant un ventall més ampli del que s'entén estrictament per contingut en el sentit tradicional. És necessari, doncs, plantejar-se una gestió dels recursos docents orientada a facilitar la creació d'itineraris formatius que permetin als estudiants assolir les competències desitjades, així com complementar la seva formació. En lloc de proporcionar els continguts directament als estudiants, l'objectiu és aconseguir un procés d'aprenentatge centrat en l'usuari mitjançant la formació que els permeti ser autònoms en la localització, l'ús i fins i tot la generació de continguts necessaris en cada activitat.

Promoting the Creation, Share and Use of OERs through Open Repositories and Social Networks

In this paper we discuss and analyze the process of using a learning object repository and building a social network on the top of it, including aspects related to open source technologies, promoting the use of the repository by means of social networks and helping learners to develop their own learning paths.

Improved flooding of broadcast messages using extended multipoint relaying

A common operation in wireless ad hoc networks is the flooding of broadcast messages to establish network topologies and routing tables. The flooding of broadcast messages is, however, a resource consuming process. It might require the retransmission of messages by most network nodes. It is, therefore, very important to optimize this operation. In this paper, we first analyze the multipoint relaying (MPR) flooding mechanism used by the Optimized Link State Routing (OLSR) protocol to distribute topology control (TC) messages among all the system nodes. We then propose a new flooding method, based on the fusion of two key concepts: distance-enabled multipoint relaying and connected dominating set (CDS) flooding. We present experimental simulationsthat show that our approach improves the performance of previous existing proposals.

JXTAnonym: An anonymity layer for JXTA services messaging

With the evolution of the P2P research eld, new problems, such as those related with information security, have arisen. It is important to provide security mechanisms to P2P systems, since it has already become one of the key issues when evaluating them. However, even though many P2P systems have been adapted to provide a security baseline to their underlying applications, more advanced capabilities are becoming necessary. Speci cally, privacy preservation and anonymity are deemed essential to make the information society sustainable. Unfortunately, sometimes, it may be di cult to attain anonymity unless it is included into the system's initial design. The JXTA open protocols speci cation is a good example of this kind of scenario. This work studies how to provide anonymity to JXTA's architecture in a feasible manner and proposes an extension which allows deployed services to process two-way messaging without disclosing the endpoints'identities to third parties.

Técnicas de Anonimato para Securizar Redes Móviles Ad Hoc

Las redes móviles ad hoc son redes formadas por lainterconexión de terminales inalámbricos que de manera autónoma,sin ninguna administración central, establecen enlaces decomunicación entre ellos. La infraestructura de red la componenlos propios terminales de usuarios que actúan de gestores yencaminadores de paquetes. Así, un usuario cualquiera puedeconectarse con un terminal remoto a través de una conexiónmultisalto entre diferentes usuarios. En este tipo de redes tanabiertas, uno de los retos prioritarios es proteger el anonimatode los sujetos y sus localizaciones. En este artículo hacemos unrepaso de las técnicas existentes a través de los protocolos que sehan propuesto en la literatura, y exponemos los problemas queaun quedan abiertos.